Lol that cracked me up
tooter's manifold adventure...
1,454 posts · 559,522 views · page 8 of 30
Replies continued
Here's some pics of the new flange for the intake manifold... 🙂
Picture not included in this copy
The manifold needed a name... so I figured what the heck, I'll call it a tooter! 😆
Picture not included in this copy
Picture not included in this copy
Since the CNC machine did not make undercuts, the port was scribed and I'll simply file it by hand down to the mark to fit. This completely resolved the port matching issue. 👍
Picture not included in this copy
Picture not included in this copy
The manifold needed a name... so I figured what the heck, I'll call it a tooter! 😆
Picture not included in this copy
Picture not included in this copy
Since the CNC machine did not make undercuts, the port was scribed and I'll simply file it by hand down to the mark to fit. This completely resolved the port matching issue. 👍
Picture not included in this copy
Those guys are doing great looking work! I'd hate to know what the reatil price of this project would be though. 👍 for making it happen.
ok, wow....I really like the screen name milled into the top of it. that makes it really pop (not that it didn't before). this is going to look so good on your car.
I have absolutely no idea how all of this will shake out, because I still don't even know how well the manifold will work. The fun is in finding out. 🙂Originally Posted by Flipper_1938 ↑Those guys are doing great looking work! I'd hate to know what the reatil price of this project would be though. 👍 for making it happen.
The manifold needed a name so I just used "tooter". 😆Originally Posted by BEEF ↑ok, wow....I really like the screen name milled into the top of it. that makes it really pop (not that it didn't before). this is going to look so good on your car.
The CNC machine is not set up to generate lettering fonts, so I designed the letters to be a simple mechanical combination of six evenly spaced circles and straight vertical and horizontal lines... and am totally pleased with the results. 👍
Manifold name looks cool, and certainly personalizes it.
I'm thinking that anybody who is not in the know is going to call it Jooter.
I'm thinking that anybody who is not in the know is going to call it Jooter.
"Jooter" is COOL. 👍
Maybe that's a Canadian or European thing... but here, lower case j's extend below the writing line and are dotted and not crossed, and upper case J's are not fully crossed like T's are.Originally Posted by WeeYari ↑Manifold name looks cool, and certainly personalizes it.
I'm thinking that anybody who is not in the know is going to call it Jooter.
Either way is fine. It's catchy. Logos need to be catchy. 🙂
looks like your "j" and "t" made a baby or you put the lower case "t" backwards :D
Yes, I did that on purpose to create "mirror image" symmetry between the two t's and o's. Something unusual and out of the ordinary is what makes a logo catchy. 😉Originally Posted by Golddeenoh ↑looks like your "j" and "t" made a baby or you put the lower case "t" backwards :D
upper case J's are not fully crossed like T's are.They are in serif fonts (Times/etc.).
The font for this forum is a sans serif font (verdana/helvetica/arial) where this is no crossing at all or "half crossed".
Helvetica J:
Picture not included in this copy
Times New Roman J:
Picture not included in this copy
Augh! He said serif!!
I agree about the catchy logo idea though, and can appreciate the effort to use simple shapes for easier manual G-code.
I agree about the catchy logo idea though, and can appreciate the effort to use simple shapes for easier manual G-code.
Yes. I just thought like the machine would think: 🙂Originally Posted by CrankyOldMan ↑Augh! He said serif!!
I agree about the catchy logo idea though, and can appreciate the effort to use simple shapes for easier manual G-code.
2 full circles oo
2 semi circles, each with a + at one end
1 3/4 circle with a horizontal _
1 semi circle with a vertical l
Picked up all the pieces from the CNC machine shop today... 🙂
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Cranky... you can see the the areas on the inside of the outer runners that will be undercut with a hand file to the line scribed by the machine that matches the Yaris intake ports on the head. The solution was so simple. 🙂
Picture not included in this copy
Next up is an installation clearance test of everything including test fitting the throttle body...
...and then it's off to the welder. 🙂
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Cranky... you can see the the areas on the inside of the outer runners that will be undercut with a hand file to the line scribed by the machine that matches the Yaris intake ports on the head. The solution was so simple. 🙂
Picture not included in this copy
Next up is an installation clearance test of everything including test fitting the throttle body...
...and then it's off to the welder. 🙂
Lookin good :)
slap that shit in the car!
One step at a time... 🙂
What's sealing the adapter for the TB to the manifold?
A stock Corolla throttle body gasket seals the adaptor to the manifold...
Picture not included in this copy
It's a thin stiff metal sheet with rubberized coating on both sides. All of the gaskets used are OEM.
Picture not included in this copy
Those three black allen bolts holding the adaptor to the manifold are screwed into the original threaded Corolla throttle body mounting holes.
Picture not included in this copy
It's a thin stiff metal sheet with rubberized coating on both sides. All of the gaskets used are OEM.
Picture not included in this copy
Those three black allen bolts holding the adaptor to the manifold are screwed into the original threaded Corolla throttle body mounting holes.
I can't wait to see what this does on a dyno. So close!
Damn damn damn hurry up!!! ;)
So is this thing going to be a "shower" or a "grower"? 😁
Far more likely to be a "shower". 😆
Remember that the Toyota engineers could model the plastic intake manifold in absolutely any shape, so I'm certain that what they came up with was the best for overall driveability.
Now that all the parts are back home, I just took a cloth measuring tape to the runners of both manifolds and am suprised to discover that the runners are just slightly longer than the stock Yaris runners! 😲
Yaris runners, end to end: 19"
Tooter runners, end to end: 20"
Just by looking at both, Dang! I would have sworn that the Corolla's were a lot shorter! It was the larger diameter that only made them appear that way. This bodes well for low end performance, although I still believe that low end torque will suffer somewhat because larger diameter runners means slower air velocity at low rpms. Now how much low end loss is an open question which will be settled on the dyno. 🙂
Here's a pic of the inside of the stock manifold...
Picture not included in this copy
You can see the entrance to the first runner at the bottom which is at 90 degrees to the manifold's intake, and the plenum is quite large.
In contrast, these runners are all pointing directly at the manifold's intake and are all the same short distance from it...
Picture not included in this copy
I believe that this manifold would really shine under a forced induction situation. First, because it it is plenty strong to take being pressurized, and second, it can handle 20% more air flow under equal conditions because it was made for an engine with 20% more displacement.
Remember that the Toyota engineers could model the plastic intake manifold in absolutely any shape, so I'm certain that what they came up with was the best for overall driveability.
Now that all the parts are back home, I just took a cloth measuring tape to the runners of both manifolds and am suprised to discover that the runners are just slightly longer than the stock Yaris runners! 😲
Yaris runners, end to end: 19"
Tooter runners, end to end: 20"
Just by looking at both, Dang! I would have sworn that the Corolla's were a lot shorter! It was the larger diameter that only made them appear that way. This bodes well for low end performance, although I still believe that low end torque will suffer somewhat because larger diameter runners means slower air velocity at low rpms. Now how much low end loss is an open question which will be settled on the dyno. 🙂
Here's a pic of the inside of the stock manifold...
Picture not included in this copy
You can see the entrance to the first runner at the bottom which is at 90 degrees to the manifold's intake, and the plenum is quite large.
In contrast, these runners are all pointing directly at the manifold's intake and are all the same short distance from it...
Picture not included in this copy
I believe that this manifold would really shine under a forced induction situation. First, because it it is plenty strong to take being pressurized, and second, it can handle 20% more air flow under equal conditions because it was made for an engine with 20% more displacement.
Did you think of maybe running a Corolla TB on it later on down the road?
I don't think so, because I don't want to deal with trying to rig up throttle linkage and fighting ECU issues. It's much simpler just to run the stock Yaris throttle body. 🙂Originally Posted by Bluevitz-rs ↑Did you think of maybe running a Corolla TB on it later on down the road?
I thought I read a thread where people were using a corolla TB with no wiring/ecu issues. Plug and play. Why not go that route? My plan is to buy another stock intake manifold and port match it to a corolla TB.
Can you find where you saw that? Is the Corolla throttle body also drive by wire?Originally Posted by 4/20 NEVER FORGET ↑I thought I read a thread where people were using a corolla TB with no wiring/ecu issues. Plug and play. Why not go that route? My plan is to buy another stock intake manifold and port match it to a corolla TB.
DIY - 1.8L 1ZZ-FE TB Connector Chip Swap
Best / Worst Yaris Investments
there's been a few threads on it...
Best / Worst Yaris Investments
there's been a few threads on it...
There have been very mixed results with the 4-bolt DBW Corolla TBs, ranging from no issues to abject failure. They are electrically compatible, but the only real benefit from using one (w/o engine management) is that you effectively open the throttle faster. The corolla has a larger diameter TB, so you allow more air flow for the same throttle signal.
Beyond that, I really don't know the specifics. There's the potential to lean out your AFR too much at WOT because the ECU isn't expecting that much air to be available, and the stock fuel maps may cause it to misbehave.
Going to a 3-bolt, cable throttle with a separate throttle position sensor (TPS) is only practical with standalone engine management (this is how Garm gets away with it) due to unresolved issues with the stock TPS signal. I believe that CTScott poked around with a scope and meter on a stock TB but wasn't able (?) to make sense of the signals.
There has been a good deal of debate and experimenting with this, but no magic bullet solution. It mostly comes down to the stock ECU being a "learning" unit, and it's not happy with signals outside of the expected range.
Beyond that, I really don't know the specifics. There's the potential to lean out your AFR too much at WOT because the ECU isn't expecting that much air to be available, and the stock fuel maps may cause it to misbehave.
Going to a 3-bolt, cable throttle with a separate throttle position sensor (TPS) is only practical with standalone engine management (this is how Garm gets away with it) due to unresolved issues with the stock TPS signal. I believe that CTScott poked around with a scope and meter on a stock TB but wasn't able (?) to make sense of the signals.
There has been a good deal of debate and experimenting with this, but no magic bullet solution. It mostly comes down to the stock ECU being a "learning" unit, and it's not happy with signals outside of the expected range.
Thanks for the threads, Blue. 🙂
I don't think I want to get involved in drilling out rivets, swapping chips, cracking idle screws, and rerouting coolant lines just now. Right now I'm focused on just one project... the manifold. Things turn out the best when I only do one thing at a time. 😉
I don't think I want to get involved in drilling out rivets, swapping chips, cracking idle screws, and rerouting coolant lines just now. Right now I'm focused on just one project... the manifold. Things turn out the best when I only do one thing at a time. 😉
First, because it it is plenty strong to take being pressurized,The stock manifold will handle 20+ psi of boost. It's pretty strong. Chris Rado ran his time attack tC the whole first season with a stock plastic mani on it. On the Yaris, I haven't heard of one failing, and we have quite a few turbo kits out there running various levels of boost. 🙂
Thanks for the info, Garm. 🙂
I know nothing about forced induction, and just figured that the stock plastic OEM manifold was designed for vacuum and not pressure.
I know nothing about forced induction, and just figured that the stock plastic OEM manifold was designed for vacuum and not pressure.
where did you bought the oem gasket ?
I will need to pickup a bunch of gasket :)
I will need to pickup a bunch of gasket :)
Test fitting time... 🙂
Picture not included in this copy
It's a drop in fit! 👍
Did a little fine tuning with the Dremel. Since these were both undercuts, I just did them by hand...
Picture not included in this copy
Picture not included in this copy
Clears the fuel rail perfectly with ~almost~ zero clearance...
Picture not included in this copy
Ports matched flawlessly... 👍
Picture not included in this copy
Next up: test fit the throttle body. 🙂
Picture not included in this copy
It's a drop in fit! 👍
Did a little fine tuning with the Dremel. Since these were both undercuts, I just did them by hand...
Picture not included in this copy
Picture not included in this copy
Clears the fuel rail perfectly with ~almost~ zero clearance...
Picture not included in this copy
Ports matched flawlessly... 👍
Picture not included in this copy
Next up: test fit the throttle body. 🙂
The flange is now a drop in fit, the throttle body bolts onto the adaptor like a dream, and the rest of the manifold has no clearance issues... ( goody 🙂 )
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
However... nothing else fits! 😆
All of the hoses are going to need rerouting, and I'm going to have to find a way to (gulp!) lose 2 3/4 inches on the already super short ram intake to make the air filter fit. But these issues are minor compared to getting the manifold itself to work out. 👍
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
However... nothing else fits! 😆
All of the hoses are going to need rerouting, and I'm going to have to find a way to (gulp!) lose 2 3/4 inches on the already super short ram intake to make the air filter fit. But these issues are minor compared to getting the manifold itself to work out. 👍
Wow I like how the first pic look !
you should do a little cleanup of the head while the flange has no runners on it. would make it SUPER easy to 100% port match it and get rid of the casting marks.
this work is SO much fun to watch. i applaud you.
If the head was off the engine I'd give it a whirl. But with the head on, I don't want to risk getting metal chips in the engine.Originally Posted by Bluevitz-rs ↑you should do a little cleanup of the head while the flange has no runners on it. would make it SUPER easy to 100% port match it and get rid of the casting marks.
Thanks, groove... 🙂Originally Posted by fnkngrv ↑this work is SO much fun to watch. i applaud you.
I'm having so much fun learning from this unfolding process and addressing the details as they present themselves by coming up with creative solutions. 👍
There's no risk if the valves are closed. Then just blow it out with compressed air.Originally Posted by tooter ↑If the head was off the engine I'd give it a whirl. But with the head on, I don't want to risk getting metal chips in the engine.
how much for the flange and adaptor ? can you hve other one made ? :D
This is just a personal preference and I know that other people do this... but I'm not going to grind on a head when its on the engine. There is a sticky residue inside the engine ports that will make small chips stick in the crevices around the valve stems and valve heads even under pressurized air. there's also an issue of blowing tiny metal chips around under the hood. that means the alternator needs to be covered as well as the belt so that chips don't get stuck under it. With one cylinder's valves closed, some of the others will be open, so they would need to be plugged and taped. The only way I'd grind is if the valves were out and the head could be hot tanked afterwards.Originally Posted by Bluevitz-rs ↑There's no risk if the valves are closed. Then just blow it out with compressed air.
There's also another reason... that would be making two changes at once, so I wouldn't be able to accurately quantify the difference on the dyno with just the manifold itself.
But, hey, you're perfectly free to grind your head if you want. 👍
The manifold can be glass beaded because afterwards it can be hot tanked to insure that every particle of blasting medium is gone. Being a junkyard part, it's totally filthy and sticky inside and would need professional cleaning even if it wasn't blasted. It's hard to make out, but this was the original condition...
Picture not included in this copy
The runners are all as dirty as those ports, and all the way through, as well as the complete inside of the plenum. There is an intake port that extends into the middle of the plenum which makes it impossible to clean without being totally immersed.
Mine was that dirty on the outside too. I'm not sure if this applies to non-TDI manifolds, but this seems to be a pretty popular method:Originally Posted by tooter ↑Being a junkyard part, it's totally filthy and sticky inside and would need professional cleaning even if it wasn't blasted. It's hard to make out, but this was the original condition...
The runners are all as dirty as those ports, and all the way through, as well as the complete inside of the plenum. There is an intake port that extends into the middle of the plenum which makes it impossible to clean without being totally immersed.
http://youtu.be/oet4qWeZuYA
First I need to know if this setup will even work decently. That will determine whether or not it would be worth your while. We'll all find out if it's "go" or just "show" after the prototype has been run on the dyno.Originally Posted by packetrace ↑how much for the flange and adaptor ? can you hve other one made ? :D
But IF this works (and, man, that's a really big IF 😆)...
...I do think that the mounting flange, throttle body adaptor and its 3 mounting bolts, and all 3 gaskets would make a really neato "do-it-yourself" kit. 🙂
Then you could simply get your own junkyard manifold and finish it up any way you'd like. 👍
Wow... that's really exciting...😳Originally Posted by CrankyOldMan ↑Mine was that dirty on the outside too. I'm not sure if this applies to non-TDI manifolds, but this seems to be a pretty popular method:
http://youtu.be/oet4qWeZuYA
...but I'd be concerned with melting this manifold's really thin aluminium tubing runners.
soo your manifold is off a 1zz drive by cable? If we got hold of the dbw 1zz with the 4 bolt throttle body, would we just need the mounting flange only?
*confused*
*confused*
Originally Posted by tooter ↑First I need to know if this setup will even work decently. That will determine whether or not it would be worth your while. We'll all find out if it's "go" or just "show" after the prototype has been run on the dyno.
But IF this works (and, man, that's a really big IF 😆)...
...I do think that the mounting flange, throttle body adaptor and its 3 mounting bolts, and all 3 gaskets would make a really neato "do-it-yourself" kit. 🙂
Then you could simply get your own junkyard manifold and finish it up any way you'd like. 👍
Yes. It's off of an 1998-2003 Toyota Corolla 1.8L 1ZZ-FE engine with a 3 bolt cable operated throttle body.Originally Posted by enviri ↑soo your manifold is off a 1zz drive by cable?
If we got hold of the dbw 1zz with the 4 bolt throttle body, would we just need the mounting flange only?The adaptor only adapts the Corolla 1ZZ-FE 3 bolt cable controlled throttle body manifold to the Yaris 1NZ-FE 4 bolt electronically controlled throttle body.
*confused*
Not entirely true: the Corolla 4-bolt TB is the same mounting pattern, just with a larger diameter hole/valve.Originally Posted by tooter ↑The adaptor only adapts the Corolla 1ZZ-FE 3 bolt cable controlled throttle body manifold to the Yaris 1NZ-FE 4 bolt electronically controlled throttle body.