Yarisworld Archive

tooter's manifold adventure...

1,454 posts · 559,522 views · page 9 of 30

Replies continued

ljming99Singapore · Jul 29, 2012#401
Nice,

Im guessing the next order of the day would be some dyno charts 😁
ViperoniBrampton, ON · Jul 29, 2012#402
Very nice, hit the road yet? :D
tooterThread starterLos Angeles · Jul 29, 2012#403
Originally Posted by CrankyOldMan ↑
Not entirely true: the Corolla 4-bolt TB is the same mounting pattern, just with a larger diameter hole/valve.
Oh, right... that was the one that people were trying to get to work. The hole in my adaptor is sized to fit the stock Yaris throttle body.
tooterThread starterLos Angeles · Jul 29, 2012#404
Originally Posted by ljming99 ↑
Nice,

Im guessing the next order of the day would be some dyno charts 😁
You guys are WAY ahead of where I actually am! 😆

The manifold is still in two pieces. First it needs to be welded, then glass beaded, then hot tanked, then I need to fabricate a custom intake for it before I can even begin to think about running the engine.
ljming99Singapore · Jul 30, 2012#406
Originally Posted by tooter ↑
You guys are WAY ahead of where I actually am! 😆

The manifold is still in two pieces. First it needs to be welded, then glass beaded, then hot tanked, then I need to fabricate a custom intake for it before I can even begin to think about running the engine.
Haha, its just me but I would get it to a basic "up and running"stage, then run some tests before going all out for the aesthetics / extras.🎉
cali yarisCanoga Park, CA · Jul 30, 2012#407
scroll back everyone, there is a pool for your guesses on horsepower and torque changes (gain or loss)... with a prize.
tooterThread starterLos Angeles · Jul 30, 2012#408
Originally Posted by Viperoni ↑
Just for the heck of it, I found the 1NZ-FXE intake....
http://www.ebay.com/itm/2004-2009-TO...f6d5ae&vxp=mtr
I saw that really odd one, too. It's specifically designed to operate an engine within a narrow rpm range like a stationary industrial engine.

It's made to charge the batteries on a Prius.
tooterThread starterLos Angeles · Jul 30, 2012#409
Originally Posted by ljming99 ↑
Haha, its just me but I would get it to a basic "up and running"stage, then run some tests before going all out for the aesthetics / extras.🎉
I'm anxious to get it going, too... 🙂

...but I just can't skip welding and hot tanking, because the old manifold is absolutely filthy inside, and I'm not going to risk wrecking a brand new engine. The same place that does the welding also happens to do glass beading.
ViperoniBrampton, ON · Jul 30, 2012#410
Originally Posted by tooter ↑
I saw that really odd one, too. It's specifically designed to operate an engine within a narrow rpm range like a stationary industrial engine.

It's made to charge the batteries on a Prius.
I believe the engine gets connected to the driveline on the Prius and is used to directly propel the car in addition to the electric motor (as opposed to only charging the batteries).
Bluevitz-rsOshawa, Ontario, Canada · Jul 30, 2012#411
Originally Posted by Viperoni ↑
I believe the engine gets connected to the driveline on the Prius and is used to directly propel the car in addition to the electric motor (as opposed to only charging the batteries).
it does. the engine operates between 1200-5000 rpm
ViperoniBrampton, ON · Jul 30, 2012#412
Originally Posted by Bluevitz-rs ↑
it does. the engine operates between 1200-5000 rpm
That I didn't know... that definitely makes it easier to increase the engine's efficiency.
tooterThread starterLos Angeles · Jul 30, 2012#413
Originally Posted by Bluevitz-rs ↑
it does. the engine operates between 1200-5000 rpm
Same here. I had no idea that the engine was actually connected to the driveline. That manifold configuration is exactly the same as I've seen on stationary industrial engines that operate at a "fixed" rpm.

Do you know that when it's running is it propelling the car concurrently with the electric motor? 1200 to 5000 means that it is never idling, but is always under a load.
tooterThread starterLos Angeles · Jul 31, 2012#414
The manifold pieces went to the welder today, and I'll have it back at the end of this week. I undercut the two inside port edges with a Dremel and they turned out just fine. 👍

Getting closer to dyno time... so you guys had better get your HP/TQ guesses in. 🙂
BEEFnorth carolina · Jul 31, 2012#415
I just want the excel numbers to play with. I actually like playing with excel when it's something I want to do (vs have to do).

this makes me wonder if this would be my next step after exhaust mods.

maybe garm will give you 5% off for garnering all the attention since most of the guys interested in your project will probably buy his once his is done. lol
YodaFL · Jul 31, 2012#416
+4 whp -5tq
Jason@SportsCarDebary, FL · Jul 31, 2012#417
-12hp, -18tq.
packetraceQuebec · Jul 31, 2012#418
+5hp +3tq
tooterThread starterLos Angeles · Jul 31, 2012#419
Originally Posted by BEEF ↑
I just want the excel numbers to play with. I actually like playing with excel when it's something I want to do (vs have to do).

this makes me wonder if this would be my next step after exhaust mods.

maybe garm will give you 5% off for garnering all the attention since most of the guys interested in your project will probably buy his once his is done. lol
MI's manifolds will likely look nicer as mine is only an old junkyard part... but I'll make it as good as it can be considering what it already is.

Hey Garm... are you still actually going to let a totally inexperienced novice like me get a manifold up and running before you do? 😉

So far it looks like the elapsed time for this project from inception to a completed running prototype will be about 2 months. I first got the manifold on June 7th, and will likely have it on the engine this coming weekend about August 5th.

Even though the adaptor flange is a little thicker than the stock plastic manifold which is already pretty thick... all of the OEM bolts, studs, and nuts will work just fine. 👍
Maitre_Te_TeQuébec · Jul 31, 2012#420
me, i think +2hp +4 tq
I have start this project me too and I wait for the flange. I have start this mod last chrismas lollll !
tooterThread starterLos Angeles · Jul 31, 2012#421
Originally Posted by BEEF ↑
I just want the excel numbers to play with. I actually like playing with excel when it's something I want to do (vs have to do).
I'll be sure to get all of the number lists for the second dyno runs just like the first, so that you'll have plenty of information to make detailed comparisons at every increment. 👍
tooterThread starterLos Angeles · Jul 31, 2012#422
That's great guys... 🙂

You got your guesses really scattered out all over the place. 👍

Just to recap, here are all of the guesses so far:

malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 -5
Jason -12 -18
packet +5 +3
Maitre +2 +4

...and of course 😉
Billiam
Picture not included in this copy
+ 1,000,000
malibuguyWestminster, MD · Jul 31, 2012#423
Lol dr evil makes me laugh everytime
Jeff@MicroImageSFV, CA · Jul 31, 2012#424
malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 -5
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ

Added mine at the bottom. Just to be clear, these are "peak" numbers and going off your highest HP dyno. Redline numbers may be slightly different. I need that discount coupon! 😁
tooterThread starterLos Angeles · Jul 31, 2012#425
Originally Posted by Jeff@MicroImage ↑
malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 -5
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ

Added mine at the bottom. Just to be clear, these are "peak" numbers and going off your highest HP dyno. Redline numbers may be slightly different. I need that discount coupon! 😁
You got it, Jeff. 🙂
Peak... not redline. 👍

The guesses will be compared to the best run of:

99.93 HP
101.22 TQ
tooterThread starterLos Angeles · Jul 31, 2012#426
Originally Posted by malibuguy ↑
Lol dr evil makes me laugh everytime
I know... he cracks me up, too! 😆
Bluevitz-rsOshawa, Ontario, Canada · Jul 31, 2012#427
malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 -5
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ
Bluevitz-RS +4hp +6Tq


Just to keep the ball rollin
Scubaru Stevecalgary · Jul 31, 2012#428
[QUOTE=Bluevitz-rs;659597]malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 -5
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ
Bluevitz-RS +4hp +6Tq
Scubaru Steve 0hp +10Tq
Flipper_1938Kentucky · Aug 1, 2012#429
malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 -5
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ
Bluevitz-RS +4hp +6Tq
Scubaru Steve 0hp +10Tq
Flipper_1938 +6hp +4 ft lbs
ViperoniBrampton, ON · Aug 1, 2012#430
malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 -5
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ
Bluevitz-RS +4hp +6Tq
Scubaru Steve 0hp +10Tq
Flipper_1938 +6hp +4 ft lbs
Viperoni +2 -5
tooterThread starterLos Angeles · Aug 2, 2012#431
TA DA... 🙂

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

All welded up and ready to mount on the engine. 👍
malibuguyWestminster, MD · Aug 2, 2012#432
Skeet skeet....
YodaFL · Aug 2, 2012#433
Originally Posted by tooter ↑
TA DA... 🙂

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

All welded up and ready to mount on the engine. 👍
!!!!!!!!!!!😳!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

1 attachment not included in this copy

mazillaSan Jacinto California · Aug 2, 2012#434
saweeet!


When is the cutoff for the hp/tq estimates?
eTiMaGoBangkok, Thailand · Aug 3, 2012#435
totally tubular, dude!
tooterThread starterLos Angeles · Aug 3, 2012#436
Right up until I post the dyno results. If anyone wants to change their guess, they can. Just copy the list of guesses, and repost your updated guess in this thread. 👍

Just in case anyone wants to rethink their guess, keep in mind that everything on either side of the manifold is exactly the same... same intake... same throttle body... same engine... same exhaust... same ECU.

The differences of the tooter manifold as compared to the stock manifold are:

1. ~5% longer runners

2. ~23% larger diameter runners

3. very small plenum, only ~30% of stock manifold plenum volume

4. intake tube behind the throttle body empties into the exact middle of the plenum

5. all of the entrance ports of the runners are in direct alignment with the axis of the throttle body
YodaFL · Aug 3, 2012#437
malibu +4 -6
Tooter +2 -3
Mazilla +1,000
Garm -5 -5
Anomaly +1 -3
Ljming -3 +3
BEEF +3 -2
Goldeenoh +5 -3
Goliath 0 0
tk-421 +4 -3
Yoda +4 +3
Jason -12 -18
packet +5 +3
Maitre +2 +4
Jeff -3HP -10TQ
Bluevitz-RS +4hp +6Tq
Scubaru Steve 0hp +10Tq
Flipper_1938 +6hp +4 ft lbs
Viperoni +2 -5
ljming99Singapore · Aug 3, 2012#438
Originally Posted by tooter ↑
Right up until I post the dyno results. If anyone wants to change their guess, they can. Just copy the list of guesses, and repost your updated guess in this thread. 👍

Just in case anyone wants to rethink their guess, keep in mind that everything on either side of the manifold is exactly the same... same intake... same throttle body... same engine... same exhaust... same ECU.

The differences of the tooter manifold as compared to the stock manifold are:

1. ~5% longer runners

2. ~23% larger diameter runners

3. very small plenum, only ~30% of stock manifold plenum volume

4. intake tube behind the throttle body empties into the exact middle of the plenum

5. all of the entrance ports of the runners are in direct alignment with the axis of the throttle body
Doesnt really matter if it failed in the performance department.

BLING BLING FTW 😳😳😳
BEEFnorth carolina · Aug 3, 2012#439
that looks awesome

(is it on the car yet, lol)
tooterThread starterLos Angeles · Aug 3, 2012#440
Originally Posted by ljming99 ↑
Doesnt really matter if it failed in the performance department.

BLING BLING FTW 😳😳😳
Performing worse is always a possibility.
But it definitely has +10 +10 bling. 🙂

I'm really curious how it will drive at low rpms with a combination of larger longer runners and almost no plenum.
tooterThread starterLos Angeles · Aug 3, 2012#441
Originally Posted by BEEF ↑
that looks awesome

(is it on the car yet, lol)
Not yet. 😉
I have a full day of work today and we're entertaining this weekend, so it's not likely to get installed for a few days.

There's a straight silicone coupler arriving today so I can work on adapting the intake to fit in the shorter space. The larger longer manifold pushes the throttle body 2 3/4 inches farther to the right. Gonna be a really tight fit!😲
cali yarisCanoga Park, CA · Aug 3, 2012#442
If anyone wants to change their guess, they can.
So someone can review all the guesses, educate themselves from that data, and change their guess? Seems hardly fair, but it's your game. I know casinos don't allow it. 😆
tooterThread starterLos Angeles · Aug 3, 2012#443
Originally Posted by cali yaris ↑
So someone can review all the guesses, educate themselves from that data, and change their guess? Seems hardly fair,
It would definitely be unfair if some people had an advantage that others did not have, but it's fair when everyone has exactly the same advantage to make their informed guess as good as possible. The measurements are inconclusive and just some rough parameters that infer a variety of results both positive and negative.

but it's your game. I know casinos don't allow it. 😆
...then it's good this isn't Vegas. 😉
CTScottUSA, CT · Aug 3, 2012#444
Here's mine: -2 HP, +4 ft lbs
cali yarisCanoga Park, CA · Aug 3, 2012#445
I'm saying the guesses themselves are informative; late guessers have a small advantage, and re-guessers have significant advantage in placing their guess to try to win.

Not that any of that matters. 🙂 It's an academic discussion only, and all in good fun.

Hint: I'm not changing my guess 😉
xnamerxxso cal · Aug 3, 2012#446
If your only revving to the stock rev limit im guessing -10hp -10tq and bonus if it goes into limp mode.
tooterThread starterLos Angeles · Aug 3, 2012#447
Originally Posted by xnamerxx ↑
If your only revving to the stock rev limit im guessing -10hp -10tq and bonus if it goes into limp mode.
-10 -10 it is, name. 🙂

The engine is bone stock with no added electronic management so it only goes to the stock rev limit... and takes a really long time to get there! 😆
Bluevitz-rsOshawa, Ontario, Canada · Aug 3, 2012#448
Have you done a volume comparison with water yet?
eTiMaGoBangkok, Thailand · Aug 3, 2012#449
Originally Posted by cali yaris ↑
I'm saying the guesses themselves are informative; late guessers have a small advantage, and re-guessers have significant advantage in placing their guess to try to win.

Not that any of that matters. 🙂 It's an academic discussion only, and all in good fun.

Hint: I'm not changing my guess 😉
Garm seems to be in full-on Rain Man mode? ;)
tooterThread starterLos Angeles · Aug 3, 2012#450
Originally Posted by Bluevitz-rs ↑
Have you done a volume comparison with water yet?
No, not yet... but I will now that I have both manifolds back from the shop. 👍