Yarisworld Archive

tooter's manifold adventure...

1,454 posts · 559,522 views · page 6 of 30

Replies continued

malibuguyWestminster, MD · Jul 18, 2012#251
awesome
Bluevitz-rsOshawa, Ontario, Canada · Jul 18, 2012#252
Cool. I miss my tool and die days sometimes. Took it in school and never found a job that would pay a decent wage.
tooterThread starterLos Angeles · Jul 18, 2012#253
Here's closeups of the ports taken while it was being flipped over to finish off the bottom.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

The machine ran at a very fine resolution making lots of passes so that the transitions are nice and smooth.
3cyltrboOttawa · Jul 18, 2012#254
🤤

.
.
.
.
.
Tooter for President???

anxiously awaiting the final piece and dyno results

Big ups and much respect (as Alli G would say)

Will
CrankyOldManWest Michigan · Jul 18, 2012#255
Will you be polishing the insides?
tooterThread starterLos Angeles · Jul 18, 2012#256
Hey Cranky, 🙂

Hadn't even thought about that. But I doubt it, maybe just hit them with a little fine emery cloth since I'm not running a top fuel dragster. 😆

Did you notice anything about the outside runner holes? 😉
Picture not included in this copy


We didn't undercut them as it would have added even more cost to the job. You had mentioned that as an issue, and we took the easy way around it...

Picture not included in this copy



The inner edges of the outer runners go straight down the edge of the head with no inner ledge. I'll simply feather out the inside edge of the runner tubing with a Dremel since the affected area is so small.

You should be able to the same thing to yours with no problems. 👍
tooterThread starterLos Angeles · Jul 18, 2012#257
Originally Posted by 3cyltrbo ↑
🤤

.
.
.
.
.
Tooter for President???

anxiously awaiting the final piece and dyno results

Big ups and much respect (as Alli G would say)

Will
Thanks for your kind words, Will. 🙂

I don't expect much from the second dyno as the stock Toyota manifold is factory engineered to be highly specialized for the 1NZ-FE. Whereas I'm just adapting something to an unintended purpose.

The OEM manifold does have quite a large plenum area... and that's good. 🙂

...because while the Corolla manifold has larger runners, the plenum area is quite small. This helps to make the total volume of the manifolds more equal to each other. 👍

When I get the new manifold assembled, I'm going to tape off one end of both manifolds and fill them both up with water. Then I'll pour each one out into a big measuring cup and log each volume just to see how close they are.

I get really curious about funny stuff like this... 🙂
anomoly40Central Arkansas · Jul 18, 2012#258
Are you planning on annodizing that intake?
tooterThread starterLos Angeles · Jul 18, 2012#259
Originally Posted by anomoly40 ↑
Are you planning on annodizing that intake?
No... but that's just my own personal preference. I don't much care for the shiny plastic "circus" look of anodized aluminium.

But something will definitely need to be done to "normalize" the appearance of a brand new machined intake flange and throttle body adaptor on a beat up 14 year old junkyard manifold! 😆

I'm thinking more like sandblasting the whole thing (except for the milled gasket surfaces) so that all of the surfaces will assume the same aluminium color and texture. After that, I don't know. Right now, I'm focused on finding out if the damn thing works first. 👍
anomoly40Central Arkansas · Jul 18, 2012#260
Look into Dust annodizing. I play paintball often and there are some amazing things they can do with anno.

Also Type 3 Anno doesn't have the plasticy look to it. It also helps with Heat disapation.
malibuguyWestminster, MD · Jul 18, 2012#261
Effing tits flange
tooterThread starterLos Angeles · Jul 18, 2012#262
It actually ~could~ have had tits on it... 😆
The CNC guy said that there's software with such fine image resolution that with the right bit, the machine could replicate the head on a quarter.
anomoly40Central Arkansas · Jul 18, 2012#263
We have a 1/64" endmill at work. We ordered it by accident. Even crazier is that they make smaller ones.
malibuguyWestminster, MD · Jul 18, 2012#264
Out of boredom....guessing game at gains??

Im feeling lucky...+4whp...wtq...-6peak
CrankyOldManWest Michigan · Jul 18, 2012#265
Originally Posted by tooter ↑
Hey Cranky, 🙂

Hadn't even thought about that. But I doubt it, maybe just hit them with a little fine emery cloth since I'm not running a top fuel dragster. 😆

Did you notice anything about the outside runner holes? 😉


We didn't undercut them as it would have added even more cost to the job. You had mentioned that as an issue, and we took the easy way around it...

The inner edges of the outer runners go straight down the edge of the head with no inner ledge. I'll simply feather out the inside edge of the runner tubing with a Dremel since the affected area is so small.

You should be able to the same thing to yours with no problems. 👍
Interesting. I was wondering how you would get around that. I had also considered something like that but with additional metal being added (welded) to that edge on the inside to meet the rim of the runner. Looks like it's coming along nicely, still can't wait to see how it performs!
tooterThread starterLos Angeles · Jul 18, 2012#266
Originally Posted by malibuguy ↑
Out of boredom....guessing game at gains??

Im feeling lucky...+4whp...wtq...-6peak
Hey, we should have a pool! 😆

My guess will be -6 hp at the bottom, and +2 at the top. 😉
tooterThread starterLos Angeles · Jul 18, 2012#267
Originally Posted by CrankyOldMan ↑
Interesting. I was wondering how you would get around that. I had also considered something like that but with additional metal being added (welded) to that edge on the inside to meet the rim of the runner. Looks like it's coming along nicely, still can't wait to see how it performs!
Seeing how the adaptor actually turned out with such a small area with no ledge, it's really not much of an issue. I'll just knock the edge off from the inside. 🙂
malibuguyWestminster, MD · Jul 19, 2012#268
Originally Posted by tooter ↑
Hey, we should have a pool! 😆

My guess will be -6 hp at the bottom, and +2 at the top. 😉
well whats determining bottom? its less confusing guessing at peaks

Malibuguy: +4whp -6wtq
Tooter: +2whp
..
...
....
mazillaSan Jacinto California · Jul 19, 2012#269
Put me down for + 1,000 whp...I believe in you!




;)
cali yarisCanoga Park, CA · Jul 19, 2012#270
Garm: -5 whp / -5 torque

Bonus for the CEL? 😆

Shall MI donate the prize for the pool? 🙂
tooterThread starterLos Angeles · Jul 19, 2012#271
How about something like 5% off any one purchased item as a prize. Then it's just a little bit less profit rather than an out of pocket expense. 🙂
tooterThread starterLos Angeles · Jul 19, 2012#272
Originally Posted by malibuguy ↑
well whats determining bottom? its less confusing guessing at peaks

Malibuguy: +4whp -6wtq
Tooter: +2whp
..
...
....
Yes, that's much simpler.

So far we have

Malibuguy +4
Tooter +2
Garm -5
Mazilla +1000

Mazilla, make another guess.
That one has really long odds. 😆
GolddeenohColumbia, SC · Jul 19, 2012#273
+/- 2-6%
anomoly40Central Arkansas · Jul 19, 2012#274
+1hp -3 tq
tooterThread starterLos Angeles · Jul 19, 2012#275
Originally Posted by Golddeenoh ↑
+/- 2-6%
Hey Gold... you just covered everyone else's guess. 😆

Pick just one number and one plus or minus sign. ;)
tooterThread starterLos Angeles · Jul 19, 2012#276
Originally Posted by anomoly40 ↑
+1hp -3 tq
Ok... anomaly is down for +1hp. 👍
cali yarisCanoga Park, CA · Jul 19, 2012#277
tooter, everyone is picking a number for whp, and a number for torque -- can we keep it in that format, please?

and yes, 5% on one item works for me. I'll make up a coupon for the winner of the pool.
tooterThread starterLos Angeles · Jul 19, 2012#278
Certainly, Garm. 🙂

I just thought that it might be a lot more simple with each guessing just one horsepower number. We can do it any way you want since you're providing the prize. 👍

We could combine the total of how many horsepower and torque numbers each guess is off, and whoever is the least total amount off is the winner.
tooterThread starterLos Angeles · Jul 19, 2012#279
I got some PICTURES... 🙂

Picture not included in this copy

Roger and Bill made this beautiful part. 👍
Their business is called:

Origin Designs

http://origindr.com/




Picture not included in this copy

The stock gasket drops right in and fits like a dream... 🙂

Picture not included in this copy

Picture not included in this copy

It took some filing to get the runners to fit as they are not all uniform. But the flange is on tight enough to weld. You can see on the inside the edges that need to be feathered out after it's welded up.

Picture not included in this copy

Picture not included in this copy

Ready to go to the welder... 🙂

Picture not included in this copy
tooterThread starterLos Angeles · Jul 19, 2012#280
Originally Posted by cali yaris ↑
Garm: -5 whp / -5 torque
Oh oh, Garm...😲

Maybe you already know something that everyone else here doesn't know from having worked on your manifolds for years. It's highly likely that you have the most realistic guess! 😆

Bonus for the CEL? 😆
Oh oh again... maybe you already know about that, too. Have your manifolds triggered CEL's?
ljming99Singapore · Jul 20, 2012#281
Given the long runners, and my limited knowledge of VGIS used in chevy cars.

Im guessing probably ~ +3% torque and a ~ -3% decrease in top hp assuming that vvti doesnt do something funny =P


""VGIS stands for Variable Geometry Intake System. In this system, the length of the intake manifold is varied according to the rpm of the engine. (using a set of flaps that are automatically activated, maybe).

"To provide a smooth power delivery and torque across all engine speeds, the air intake system needs to be narrow and long at low rpm and short and wide at high rpm. Since these are conflicting requirements, most inlet systems are a compromise between low and high rpm performance. Varying the inlet tract gives the best of both worlds and variable intake systems in which the inlet tract length varies depending on the rpm is now increasingly common in many cars.
The Optra 1.6’s Variable Geometry Intake System (VGIS) uses a valve to alter the length of the air intake tract, making it longer when the engine is running low revs and shortening the path of air when the engine is running at higher rpm. This improves throttle response and offers a flatter torque curve and is the main reason for the Optra 1.6’s good driveability.""
Bluevitz-rsOshawa, Ontario, Canada · Jul 20, 2012#282
^ The Toyota T-VIS on the old 3S-GE. At around 4200 it changes to the short runners and the sound and pull of the motor changes.
tooterThread starterLos Angeles · Jul 20, 2012#283
Originally Posted by ljming99 ↑
Given the long runners, and my limited knowledge of VGIS used in chevy cars.

Im guessing probably ~ +3% torque and a ~ -3% decrease in top hp assuming that vvti doesnt do something funny =P
The Corolla runners are actually a little shorter and fatter than the stock Yaris manifold...

Picture not included in this copy

You can't see the full length of the stock runners without removing the manifold and looking at the bottom, because they wrap almost all the way around the plenum like a snail shell.
BEEFnorth carolina · Jul 20, 2012#284
ok, I'll play

+3hp, -2tq

yay
cali yarisCanoga Park, CA · Jul 20, 2012#285
The two number idea was based on people's guesses -- it's your show, tooter! I'll play however you want to.

I think the torque number will be equally if not more important than whp, though, so it's fun to guess both. 🙂
tooterThread starterLos Angeles · Jul 20, 2012#286
Hp and tq is fine since everyone is already guessing both. 🙂
malibuguyWestminster, MD · Jul 20, 2012#287
wow that looks cool
GolddeenohColumbia, SC · Jul 20, 2012#288
Originally Posted by tooter ↑
Hey Gold... you just covered everyone else's guess. 😆

Pick just one number and one plus or minus sign. ;)
fine +5% hp gain and +3% torque
cali yarisCanoga Park, CA · Jul 20, 2012#289
By the way, I can't win, if my guess is the closest, next best guess wins.

No one is going to say this thing might blow 15 extra horsepower? Woosies!! 😆
GolddeenohColumbia, SC · Jul 20, 2012#290
Originally Posted by cali yaris ↑
By the way, I can't win, if my guess is the closest, next best guess wins.

No one is going to say this thing might blow 15 extra horsepower? Woosies!! 😆
wouldn't there need to be a greater balance of intake to exhaust to be able to even possibly gain that much more, i.e. a large diameter mid-pipe to ensure higher out flow with the increased inflow.
cali yarisCanoga Park, CA · Jul 20, 2012#291
^ Of course, but we're just having fun guessing right? If you saw my guess, you'd know I was kidding. 🙂
goliath1812Ocala Florida · Jul 20, 2012#292
zero change
tooterThread starterLos Angeles · Jul 20, 2012#293
That may be the safest guess of all... 😉

Since torque numbers are also being included, and I guessed +2hp at peak, I think the torque will be -3 since the runners are shorter and larger in diameter. The manifold might have greater usefulness with forced induction rather than in a normally aspirated application. It can easily handle being pressurized. I saw the throttle body adaptor. They're machining a smooth transition between the smaller bore diameter of the throttle body and the larger diameter of the manifold inlet.
tk-421Dagobah · Jul 20, 2012#294
I think I'll go with +4hp and slightly reduced torque. I'd love for Golddeenoh's (or even mazilla's) guesses to be correct instead! 👍
cali yarisCanoga Park, CA · Jul 20, 2012#295
^ tooter needs two numbers from ya, tk 😉
tooterThread starterLos Angeles · Jul 20, 2012#296
Originally Posted by cali yaris ↑
No one is going to say this thing might blow 15 extra horsepower? Woosies!! 😆
Goliath guessed that this manifold might blow. 😆
tk-421Dagobah · Jul 21, 2012#297
Originally Posted by cali yaris ↑
^ tooter needs two numbers from ya, tk 😉
I'll go with +4whp and -3% torque...
What can I say? I'm an optimist. Plus I'm shooting for a somewhat similar setup myself. 😁
cali yarisCanoga Park, CA · Jul 21, 2012#298
Goliath guessed that this manifold might blow
LOL, tooter you are so cool.

tk, I meant a whp and a torque number, both peak. That is the format for guessing. 👍
tk-421Dagobah · Jul 21, 2012#299
Fixed! 👍
tooterThread starterLos Angeles · Jul 21, 2012#300
Originally Posted by cali yaris ↑
LOL, tooter you are so cool.

tk, I meant a whp and a torque number, both peak. That is the format for guessing. 👍
I know... I just can't pass up an opportunity to fool around. 😉