Yarisworld Archive

DIY - 1.8L 1ZZ-FE TB Connector Chip Swap

322 posts · 207,058 views · page 1 of 7

Yaris T-SportOriginal post-- · Mar 8, 2009#1
.

Replies 321

eTiMaGoBangkok, Thailand · Mar 8, 2009#2
wow excellent idea! 👍
tk-421Dagobah · Mar 8, 2009#3
Awesome info! Thanks
WolfWingsKansas City, MO, USA · Mar 8, 2009#4
This bit of info let me dredge up something that might explain why earlier folks had fewer issues with the throttle-body swap.

Some Corolla's came with throttle bodies with ID #22041 on the chip housing. Others have that problematic chip-housing with ID #0D031. What'cha wanna bet the #22041 chip is special in some way? :-)
yarstarGeorgia · Mar 8, 2009#5
DUDE YOU ROCK!!!

Thank you for solving this issue for us. I can now finally install mine without a CEL coming on.

Does this also solve the high rpm when cold problem?

This is great. I am so stoked to get this on the car. It truly makes a difference that can be felt.

🙇

🤘
tk-421Dagobah · Mar 8, 2009#6
Do I need to drill through the bolts in order to crack open the TBs? Is there a better/safer way to accomplish this?
Also, what is the best way to trim the intake tube to fit the new diameter?
AlexNet0Rockland, ME · Mar 8, 2009#7
I believe they are riveted, so you will most likely have to drill them out. or be really careful prying them out


Edit, nevermind, he beat me to it.
yarstarGeorgia · Mar 8, 2009#8
Cool. I'll take the high rpm at cold idle if we can get rid of the CEL.

Thanks again T-Sport. This made my day.
AlexNet0Rockland, ME · Mar 8, 2009#9
mind if i make this a pdf for sticky posting if the mods want it?
ArkhangelPuerto Rico · Mar 8, 2009#10
ok so bigger TB means more air coming in? What is the performance gain with it?
Good? i have stock intake with K&N Drop in filter, do i need to change my intake?
mikenacaratoBrentwood, TN · Mar 9, 2009#11
can anyone confirm after driving over 100 miles that no cel comes on?

BTW this thread is awesome! thanks for doing this!
gwasabiHonolulu, Hawaii · Mar 9, 2009#12
no CEL over 100 MPH
LtNoogieWest Hills, CA · Mar 9, 2009#13
Good work on figuring this out. Where did you get a 1zz tb? At a junkyard?
FunctionSpec626, Southern California · Mar 9, 2009#15
I've had my 1ZZ TB on for over 20K miles and never had a CEL or oscillation of any kind.

You probably got a defective junkyard TB and swapping out that casing fixed whatever problems you were having with it before.
eTiMaGoBangkok, Thailand · Mar 9, 2009#16
that's another possibility, but it would be interesting if you could look at the model number on yours, to test WolfWings' theory!
yarstarGeorgia · Mar 9, 2009#17
Originally Posted by PETERPOOP ↑
That is it. I bought it from this guy here in Georgia. Really straight up guy and the price was way lower than what I found elsewhere. They get all there parts used off of totaled cars. Back in January when I got mine, he said he had 4 more.
mikenacaratoBrentwood, TN · Mar 9, 2009#18
Originally Posted by gwasabi ↑
no CEL over 100 MPH
lol i didnt mean 100mph, i meant 100 miles of driving
BLAZINBLUEVITZNEW YORK · Mar 9, 2009#19
Originally Posted by WolfWings ↑
This bit of info let me dredge up something that might explain why earlier folks had fewer issues with the throttle-body swap.

Some Corolla's came with throttle bodies with ID #22041 on the chip housing. Others have that problematic chip-housing with ID #0D031. What'cha wanna bet the #22041 chip is special in some way? :-)
ID#22041 is for vehicles with vin number starting with a LETTER (jap built)
ID# 0D031 is for vehicles with vin starting with a number (american built)

im guessing our cars do not like TB"s from american built cars.....
mikenacaratoBrentwood, TN · Mar 9, 2009#20
on both cars the throttle bodies came from japan. there is no american built TB on either car. the chassis may be built here in the us but the parts may not be. i opened up my corolla tb and my yaris tb and both are made by denso japan.
Yaris T-SportThread starter-- · Mar 9, 2009#21
car is running great with the new tb set up, no cels what so ever at this point
BLAZINBLUEVITZNEW YORK · Mar 9, 2009#22
Originally Posted by mikenacarato ↑
on both cars the throttle bodies came from japan. there is no american built TB on either car. the chassis may be built here in the us but the parts may not be. i opened up my corolla tb and my yaris tb and both are made by denso japan.
REALLY, toyota parts catalog lists 2 different TB's for corolla/matrix based on vin numbers. my findings were already posted.......
LtNoogieWest Hills, CA · Mar 9, 2009#23
Where do you see your gains? Low end? Top end?
mikenacaratoBrentwood, TN · Mar 9, 2009#24
ok so you found 2 part numbers..good job. my yaris throttle body pn is different than the 08s, was my car made in the usa? i dont think so. denso japan is made in japan.
BLAZINBLUEVITZNEW YORK · Mar 9, 2009#25
Originally Posted by mikenacarato ↑
ok so you found 2 part numbers..good job. my yaris throttle body pn is different than the 08s, was my car made in the usa? i dont think so. denso japan is made in japan.
😆 im sorry MR KNOW IT ALL. i guess you can't comprehend what i wrote and i refuse to explain it to you. unsubscribed......
FunctionSpec626, Southern California · Mar 9, 2009#26
#22030-0D030

Mine must be uber special ;)
mikenacaratoBrentwood, TN · Mar 9, 2009#27
please feel free to explain it to me, ill listen. you said american made throttle body. the throttle body on that car is not made in america. the chassis and body panels are, but electrical and most engine components are still made in japan. go look at the sticker on a new camry or corolla and it says the percentages and what was made where. if they dont have that sticker on it, then ask them and they will go get it
tk-421Dagobah · Mar 9, 2009#28
Originally Posted by LtNoogie ↑
Where do you see your gains? Low end? Top end?
Gains are reported to be in the mid- to high-end of the spectrum. I still have to install it to see for myself.
whooppee777Maryland · Mar 9, 2009#29
wait wait wait.

people with the 1zz tb were getting cel's? i never got one. i did get some oscilation but only in temperatures below freezing.

could u swap the chips from the yaris 1nz to a scion tc tb? because i noticed a greater gain in power and response using the tc TB except i got thee CEL from it.
yarstarGeorgia · Mar 9, 2009#30
Whooppee - you just got lucky. The rest of us had major CELs issues. Mine came on no matter what I did.

The gains seen with mine was major pickup mid to high end. The car really jumped @ 40 mph and continued excelerating from that point on, much stronger than stock.

Drilling out these rivets is a pain, but I'm working on it. I see you also used a allen key bolt so you keep the bolthead size to a minimum. There's one spot of the six that is super close fitting for an 'other than rivet' attachment.
whooppee777Maryland · Mar 9, 2009#31
i'd rather b lucky than good.

im thinking about taking apart my tc throttle body. it sounds like something is loose inside of it. could something b broken inside of it? the 1nz throttle body sounds solid when u shake it, no noises or feelings of movement from the inside
GideonSunnyvale, CA · Mar 10, 2009#32
Well, I'll see if I have any CELs when I receive my TB next week. Won't bother with the chip swap at first and see what happens.
yarstarGeorgia · Mar 11, 2009#33
Okay. I just performed this excellent DIY with my 2 TBs. Everything looks, feels and sounds awesome. I'll report back if I get a CEL or not. This is an excellent mod for the money.

🎉
hatchbackkid82. · Mar 11, 2009#34
how much do these go for and where can i get one from
yarstarGeorgia · Mar 11, 2009#35
Originally Posted by hatchbackkid82 ↑
how much do these go for and where can i get one from
See post #19, this thread.
hatchbackkid82. · Mar 11, 2009#36
Thanks just bought one from the same guy
FunctionSpec626, Southern California · Mar 12, 2009#37
So what is the point of this DIY thread? To fix your broken junkyard 1ZZ TB? Why not return it and get another one?
yarstarGeorgia · Mar 12, 2009#38
The mod is to replace the OEM throttle body off the 1.5L engine with a TB from a 1.8L. The 1ZZFE TB (1.8L) give you alot more air flow. The benefit is definitely felt in the mid to upper acceleration range. The car basically has alot more torque.

The problems with this mod have been numerous. The engine ocillates for some time once the new TB is installed. A high (3000rpm) idle is seen at cold starts. Usually within a few miles of travel, the Check Engine Light comes on (CEL). The ocillation problems seems to fix itself as the ECU learns the new TB, but the high cold idle and CEL issue remains. By changing out the chip, we are seeking to solve these issues.
PETERPOOPOahu · Mar 12, 2009#39
But the chip changing won't change the high idle when the car starts.
yarstarGeorgia · Mar 12, 2009#40
You are correct Peter.

Since the re-install, the high cold idle seems to be significantly shortened. It now only idles high for @ 2 minutes. It then goes down to a regular idle once the cold light is off (its currently 50-60F here). That may be due to the current temp and nothing to do with the TB.

On the other problem, I got a CEL again today. I don't know why. I followed this DIY to the letter. At this point, I'm gonna live with it. I took my car over the mountain today (very curvy roads), and couldn't BELIEVE how much torque the car has! I nearly lost it more than once. I think this mod really works well with a header. My car drives and sounds like a roadster now, not an econobox. I don't think any damage is being done with the CEL. If anyone knows otherwise, I'd appreciate the input. Can a car get too much air?
PETERPOOPOahu · Mar 12, 2009#41
I will definately be doing this in the near future.
yarstarGeorgia · Mar 12, 2009#42
Originally Posted by PETERPOOP ↑
I will definately be doing this in the near future.
You will not regret it.
Nexus1155Dorchester · Mar 13, 2009#43
I'm also interested in this let me know what that cel was from please ill probably go junkyard hunting this week to see if they have any or grab one off ebay, hopefully that cel is from something completely different! Autozone and etc do free obdii checks! Ill post up again when I get back from vegas
hatchbackkid82. · Mar 13, 2009#44
Yeah but it gets rid of the check engine lights
mikenacaratoBrentwood, TN · Mar 13, 2009#45
no it doesnt. myself and someone else above still have lights, mine has come and gone 3 times since the chip swap.
lilredrocketDFW, Texas · Mar 13, 2009#46
What is the code that comes up?
mikenacaratoBrentwood, TN · Mar 13, 2009#47
idle control. same as it was with the original chip.
LafiroNYC · Mar 14, 2009#48
What do you mean, you almost lost it?
How could this one mod change the HP/Torque so much? Well to add more to this, there is no proof like dyno numbers.

Hmm it does seem like a good idea, like changing this out and getting a SRI or CAI?
mikenacaratoBrentwood, TN · Mar 14, 2009#49
you dont almost lose a CEL. its either a code or its not. once a car goes through a driving cycle (50-100 miles, many starts and stops, etc...) it will reset the system making the light go off. if it is really a fixed problem it stays off, if it doesnt get fixed it comes back on. the code does not get fully erased from the computer unless its completely fixed. so while the light was going off for me, the code is still active in the bank and is not fixed and will not pass emissions as long as it is stored in the bank.
PETERPOOPOahu · Mar 14, 2009#50
With that sad, do you regret putting it on?