Yarisworld Archive

tooter's manifold adventure...

1,454 posts · 559,522 views · page 17 of 30

Replies continued

fnkngrvIn The Hotbox · Aug 27, 2012#801
Garm is gonna be mad for me showing it, but oh well....







































































Picture not included in this copy

😆😆😆😆😆
cali yarisCanoga Park, CA · Aug 27, 2012#802
whew. I really can't show it til tomorrow. 🙁
fnkngrvIn The Hotbox · Aug 27, 2012#803
Originally Posted by cali yaris ↑
whew. I really can't show it til tomorrow. 🙁

awww....turn that frown upside down 👍

Tomorrow is only a couple thousand more minutes anyway. 🎉
4/20 NEVER FORGETPortland, OR · Aug 27, 2012#804
No rush. I'm excited to see it though!
cali yarisCanoga Park, CA · Aug 28, 2012#805
pics tomorrow guys -- I'm beat but I can't sleep. The manifold fits and the car runs. We had to get creative with hoses and such, but those details can be worked out later. The game is on!

Thank you Jeff for your patience and creative solutions. 👍
Bluevitz-rsOshawa, Ontario, Canada · Aug 28, 2012#806
^ did you start your own thread on it yet?
CrankyOldManWest Michigan · Aug 28, 2012#807
Originally Posted by tooter ↑
Do you know what the base gasket looks like? The reason I'm asking is to determine how to configure the adaptor, as I'm not sure if the larger bore will work with the stock 1NZ FE Oring gasket.
The mating surface of the TB is flat, just like the 1NZ. I've got one in the shed if you want pics for sketching/brainstorming.
cali yarisCanoga Park, CA · Aug 28, 2012#808
This was, and is, tooter's thread. Sorry to post up so much in here "off topic".

Here is a new thread for our manifold project:
Micro Image Intake Manifold thread
tooterThread starterLos Angeles · Aug 28, 2012#809
No problem, Garm. 🙂
We're on the same side. 👍
tooterThread starterLos Angeles · Aug 28, 2012#810
Originally Posted by CrankyOldMan ↑
The mating surface of the TB is flat, just like the 1NZ. I've got one in the shed if you want pics for sketching/brainstorming.
Just one pic would be great, Cranky. 🙂
I want to know what they look like just to be sure that I'm ordering the right one.

The bore diameters are so close between the 1NZ FE and 1ZZ FE I may have the rest of the adaptors all machined 1ZZ sized so that the manifold will work for both throttle bodies.
CrankyOldManWest Michigan · Aug 29, 2012#811
Originally Posted by tooter ↑
Just one pic would be great, Cranky. 🙂
I want to know what they look like just to be sure that I'm ordering the right one.
I've got some homework to finish up this morning, but if I have time before class, I'll snap a few.
Originally Posted by tooter ↑
The bore diameters are so close between the 1NZ FE and 1ZZ FE I may have the rest of the adaptors all machined 1ZZ sized so that the manifold will work for both throttle bodies.
I'm not sure what constitutes "close" here, but a solid step will cause some significant turbulence. I would honestly suggest making two different adapters, assuming you're not opposed to having additional inventory eating up shelf space.
cali yarisCanoga Park, CA · Aug 29, 2012#812
It would be a reverse step (if you can even call it that) if the flange is 1zz and a smaller 1nz throttle is mounted on it, and it's after the the throttle. That's how our test car is set up.

I don't know if that's going to make much of a difference.
tooterThread starterLos Angeles · Aug 29, 2012#813
Originally Posted by CrankyOldMan ↑
I've got some homework to finish up this morning, but if I have time before class, I'll snap a few.

I'm not sure what constitutes "close" here, but a solid step will cause some significant turbulence. I would honestly suggest making two different adapters, assuming you're not opposed to having additional inventory eating up shelf space.
Thanks for the good advice. I'll do that. 👍
There won't be much inventory anyways. 😆
CrankyOldManWest Michigan · Aug 29, 2012#814
Here's a pic of a 1ZZ TB from the manifold side. If you need/want a different angle or direct measurements, I can scare those up too. I bought one from fleaBay for $50 and ended up sacrificing it to the techno-god "Howzitwerk" to see if it could be disassembled, cleaned, and reassembled. Turns out the answer to that is a resounding NO.

Oh, and the .pdf is a measured drawing that I made of the basic dimensions. If the picture looks like it's mirrored from the drawing, it's because the right half of the drawing is the face of the manifold, not the TB.

2 attachments not included in this copy

Jeff@MicroImageSFV, CA · Aug 29, 2012#815
Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.
suckerfaceMilwaukee, WI · Aug 29, 2012#816
Originally Posted by Jeff@MicroImage ↑
Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.
Just to clarify, they're the -030 parts, correct? 😉
packetraceQuebec · Aug 29, 2012#817
Originally Posted by Jeff@MicroImage ↑
Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.
how much do you sell them ?😛
Jeff@MicroImageSFV, CA · Aug 29, 2012#818
Originally Posted by suckerface ↑
Just to clarify, they're the -030 parts, correct? 😉
Yes 👍


Originally Posted by packetrace ↑
how much do you sell them ?😛
You can't have one.
packetraceQuebec · Aug 29, 2012#819
Originally Posted by Jeff@MicroImage ↑

You can't have one.
YGPM...🤷
cali yarisCanoga Park, CA · Aug 29, 2012#820
He has a dryyyyy sense of humor.... unless he meant it. LOL
Jeff@MicroImageSFV, CA · Aug 29, 2012#821
Originally Posted by packetrace ↑
YGPM...🤷
PM Replied and emailed you also.

Originally Posted by cali yaris ↑
He has a dryyyyy sense of humor.... unless he meant it. LOL
I was joking 😉
packetraceQuebec · Aug 29, 2012#822
Originally Posted by Jeff@MicroImage ↑
PM Replied and emailed you also.



I was joking 😉
LOLLL
tooterThread starterLos Angeles · Aug 29, 2012#823
Originally Posted by Jeff@MicroImage ↑
Tooter, we have a couple of 1ZZ throttle bodies available here if you want to pick one up.
Thanks, Jeff. Cranky's pic did the job. I just wanted to see if the bore was equidistant from the 4 studs so that the adaptor bore diameter can be adjusted accordingly from tapering down to 48mm to straight 51mm.
tooterThread starterLos Angeles · Aug 29, 2012#824
Originally Posted by CrankyOldMan ↑
Here's a pic of a 1ZZ TB from the manifold side. If you need/want a different angle or direct measurements, I can scare those up too. I bought one from fleaBay for $50 and ended up sacrificing it to the techno-god "Howzitwerk" to see if it could be disassembled, cleaned, and reassembled. Turns out the answer to that is a resounding NO.

Oh, and the .pdf is a measured drawing that I made of the basic dimensions. If the picture looks like it's mirrored from the drawing, it's because the right half of the drawing is the face of the manifold, not the TB.
Hey, thanks Cranky! 🙂

It looks like a simple straightforward change to make the adaptor 51mm to match the 1zz throttle bore. That will make three possible tooter options:

1NZ 4 bolt 48mm
1ZZ 4 bolt 51mm
1ZZ 3 bolt 51mm
chexmixoahu · Aug 30, 2012#825
interesting tread.... weird thing is today my coworker was throwing some car parts away.. one of it is 1zz celica intake manifold.. and i was looking at it.. and in my head.. look like it can fit the yaris... i told him hold on to it so i can do more research on it.. so I'm guessing it is possible..
Bluevitz-rsOshawa, Ontario, Canada · Aug 30, 2012#826
It won't fit. Its the same as the aluminum one, but plastic.
tooterThread starterLos Angeles · Aug 30, 2012#827
Originally Posted by chexmix ↑
interesting tread.... weird thing is today my coworker was throwing some car parts away.. one of it is 1zz celica intake manifold.. and i was looking at it.. and in my head.. look like it can fit the yaris... i told him hold on to it so i can do more research on it.. so I'm guessing it is possible..
If it's an old 2000 Celica 1.8 aluminium intake manifold like this...

Picture not included in this copy

...a tooter adaptor flange would make it bolt on to a Yaris engine, although I don't know about the clearance or throttle body fitment issues. Can you post a pic of the manifold if it's aluminium? There's not much you could do if it's a plastic one.
malibuguyWestminster, MD · Aug 30, 2012#828
thats a 2zz...8000rpm screamer...aint going to do crap on a yaris
xnamerxxso cal · Aug 30, 2012#829
Wouldn't it be easier to take a honda fit HPD intake manifold and modify it to fit a yaris?
Both engines have about the same airflow requirements with the fit having more aggressive cams and a slightly higher rev limit.
tooterThread starterLos Angeles · Aug 30, 2012#830
Originally Posted by malibuguy ↑
thats a 2zz...8000rpm screamer...aint going to do crap on a yaris
Thanks for the info, malibu. 👍

I just did a search for "2000 Celica 1.8 engine" and that pic came up, and didn't realize that there were two 1.8 engines. It's pretty obvious that it would favor top end performance as the runners are super short...

Picture not included in this copy
tooterThread starterLos Angeles · Aug 30, 2012#831
Getting manifolds sandblasted amounts to a good piece of change, so instead of paying someone else to blast them, I'm going to do them myself... 🙂

Picture not included in this copy

The air compressor is suprizingly quiet because the motor turns at half speed 1,720 rpm. It's being broken in right now. The directions require running for a minimum of 20 minutes under no load to get the bearings all lubricated and to seat the rings.

Glass beading sounds especially nice because it gives aluminium surfaces a nice smooth silky luster. I'm still hunting for a local source for glass bead blasting medium. Closest so far is in Moorpark.
malibuguyWestminster, MD · Aug 31, 2012#832
you can do other media like walnuts and some other random stuff that you wouldnt think of using. of course each one does a different job.
tooterThread starterLos Angeles · Aug 31, 2012#833
Yeah, I've been reading up on all of the options. Glass bead blasting really sounds the most intriguing because the tiny round glass balls micro "shot peen" the surface and relieve the forming stresses. I also really like the "closed pore" surface glass beading produces that's resistant to dirt and greasy fingerprints. 🙂
tooterThread starterLos Angeles · Sep 1, 2012#834
Picked up a blasting cabinet from Harbor Freight today... 🙂

Picture not included in this copy

They had this one on display, but were selling another model that wasn't half as nice, so I prevailed upon the manager to sell me the older floor model at the sale price ($209). This one is superior because the cabinet and lower catch bin are not only larger, they're all a one piece welded unit, whereas the newer one was a bunch of bolted together sections which are highly likely to leak blasting medium. This one also has a separate glassed off compartment on the top for the flourescent lights while the newer one didn't.

There are pickup tubes welded into the bottom bin to which you attach the blasting medium hose so that when you're blasting, the medium falls to the bottom of the tapered bin and is then picked up again. This allows automatic recirculation of the medium without any loss.
malibuguyWestminster, MD · Sep 2, 2012#835
We used to have the same one at my shop
tooterThread starterLos Angeles · Sep 2, 2012#836
As for blasting medium, I'm going with stainless steel balls as they make no dust and don't eventually fracture like glass beads do with repeated use. That will insure a consistently silky smooth lustrous shot peened surface. 🙂
ljming99Singapore · Sep 4, 2012#837
Originally Posted by tooter ↑
Picked up a blasting cabinet from Harbor Freight today... 🙂

Picture not included in this copy

They had this one on display, but were selling another model that wasn't half as nice, so I prevailed upon the manager to sell me the older floor model at the sale price ($209). This one is superior because the cabinet and lower catch bin are not only larger, they're all a one piece welded unit, whereas the newer one was a bunch of bolted together sections which are highly likely to leak blasting medium. This one also has a separate glassed off compartment on the top for the flourescent lights while the newer one didn't.

There are pickup tubes welded into the bottom bin to which you attach the blasting medium hose so that when you're blasting, the medium falls to the bottom of the tapered bin and is then picked up again. This allows automatic recirculation of the medium without any loss.
Damnit, wish i have space and can get hold on these kind of tools here.

I could think of a 1001 things to do with that...

which of all things include my rusting gym rack bolts and cast iron weights 😳
tooterThread starterLos Angeles · Sep 4, 2012#838
Originally Posted by xnamerxx ↑
Wouldn't it be easier to take a honda fit HPD intake manifold and modify it to fit a yaris?
Both engines have about the same airflow requirements with the fit having more aggressive cams and a slightly higher rev limit.
I think the HPD manifold would experience some hood clearance issues as most of it is on top of the engine...

Picture not included in this copy

The engines are pretty similar in displacement and horsepower. Honda's being a 109HP 1.5L.
ljming99Singapore · Sep 5, 2012#839
Originally Posted by tooter ↑
The engines are pretty similar in displacement and horsepower. Honda's being a 109HP 1.5L.
Hmm, the specs i have here says the 1.3 is 100hp and the 1.5 is 120hp

VTEC JUST KICK IN YO!!!😆
tooterThread starterLos Angeles · Sep 5, 2012#840
Originally Posted by ljming99 ↑
Hmm, the specs i have here says the 1.3 is 100hp and the 1.5 is 120hp

VTEC JUST KICK IN YO!!!😆
Yeah, I had looked at some old specs for an earlier year. 😉

For 2012, they're:

117 hp @ 6,600 rpm; 106 ft lb of torque @ 4,800 rpm

But that extra power comes at the cost of some gas mileage at an EPA rated 27 city, 35 highway... as compared to the 2012 Yaris at 33 city 38 highway.
tooterThread starterLos Angeles · Sep 6, 2012#841
Since you guys are still waiting for Garm's results, here's the video of the tooter manifold dyno run to pacify you for a little bit... 😉

http://www.youtube.com/watch?v=ifMAhFmwFU0
etherdudeMass., USA · Sep 13, 2012#842
Originally Posted by tooter ↑
Since you guys are still waiting for Garm's results, here's the video of the tooter manifold dyno run to pacify you for a little bit... 😉

http://www.youtube.com/watch?v=ifMAhFmwFU0
Tooter, have you blasted and/or coated your manifold yet?
tooterThread starterLos Angeles · Sep 13, 2012#843
I started blasting one manifold so far, but need more beads. By the time they make it into all of the corners of the cabinet, there aren't enough to be picked up from the bottom of the V bin! 😆

I already ordered more and they will be here in just a few more days.


I'm using stainless steel blasting shot because the balls don't fracture like glass beads do. The tiny balls initially come covered with oxide and need to be "worn in" on a practice surface. I use a big brick of stainless steel, because that works best to shine up the balls for use. And as you continue to use the medium it gets harder and polishes better.

Stainless steel bead blasting is a relatively new technology, so there's very little information to be found. I scoured the web and could only find one person selling the beads in small lots. The only other sellers are the manufacturers themselves... three in China and two in India, and their minimum order is 2,000 pounds! 😳

The beads give a nice low micro shot peened lustered surface without dimensionally altering the pieces. If there is a scratch on the surface, it remains there and just gets polished, so I'm going to do some surface prep with fine emery cloth before blasting.

I'm just beginning to learn this as I go and am having lots of fun improving on my technique. 🙂

Two more tooter adaptor flanges will come off the CNC machine tomorrow. After I pick them up, they'll go off to the welder, and then I'll blast the manifolds. I'll post a pic of the practice blasted surface tomorrow.
malibuguyWestminster, MD · Sep 14, 2012#844
im very curious how is that going to look
tooterThread starterLos Angeles · Sep 14, 2012#845
It's nothing special and looks similar to the surface of a Parkerized gun.

Picture not included in this copy

Picture not included in this copy

The very fine stainless steel beads shot peen the aluminium and compress it, making it resistant to oil stains and fingerprints. The surface has a strange silky feel to it. And notice that surface imperfections of the rough casting are unaltered because no material is removed, just compressed. I intially tried blasting with plain sand but the angular grains left an open pored surface that readily stained even from skiin oil when touched. Whereas the bead blasted surface will look the same even years later.
malibuguyWestminster, MD · Sep 14, 2012#846
I like that...maybe throw a satin clear coat on it and be done
cali yarisCanoga Park, CA · Sep 14, 2012#847
because no material is removed, just compressed.
I don't know about that. Look at the welds; they look filed down. Sorry, but overall that just looks terrible to me. I know you'd want an honest opinion.
tooterThread starterLos Angeles · Sep 15, 2012#848
Originally Posted by cali yaris ↑
I don't know about that. Look at the welds; they look filed down. Sorry, but overall that just looks terrible to me. I know you'd want an honest opinion.
Hey Garm 🙂

That pic of the dirty manifold and the clean one aren't of the same part. I just took a pic of one of the dirty manifolds to show the contrast. The texture of each of the welds on the manifolds varies widely. I suspect that they were done by hand as they are not consistent as with automatic machine welding.

The horizontal line isn't a weld because it's a one piece casting. That's a thick seam from the two halves of the mold. And there has been no filing on any of the welds as it serves no purpose. When it's installed on the engine, the casting marks aren't visible...

Picture not included in this copy

I haven't bead blasted this tooter yet because it's on the daily driver. Just rubbed on it some with a scrubbie to clean it up a bit. I'll post up some more detailed pics tomorrow. 🙂
tooterThread starterLos Angeles · Sep 15, 2012#849
Originally Posted by malibuguy ↑
I like that...maybe throw a satin clear coat on it and be done
The shot peened surface doesn't even need a clear coat as the small pores in the surface are closed up. I wanted a surface that I could process simply all in one step and that would hold its appearance over time without any maintenance.

The new order of SS shot came today so I'll be blasting all I want tomorow.🙂
tooterThread starterLos Angeles · Sep 15, 2012#850
With lots of beads, I can blast all I want. The beads haven't become polished from use yet so this surface is a little more matt than it will be when they are. I'm just practicing to see how the whole setup works.

Picked up two more flanges and blasted one just for fun while I'm breaking in the beads...

Picture not included in this copy

Picture not included in this copy

You can see the Dremel cut out lines on the inside edges of the two outer ports. I'll be hitting them with the grinder and then blasting the finished surface.