Shiny! I'm assuming these are going into retail units?
tooter's manifold adventure...
1,454 posts · 559,522 views · page 18 of 30
Replies continued
how much do you plan ?
Hey Cranky, 🙂Originally Posted by CrankyOldMan ↑Shiny! I'm assuming these are going into retail units?
It's actually quite matt compared to the raw shiny machined surfaces. However, the durable shot peened surface will retain it's appearance over time.
Yes. Some will go to make complete manifolds, and some will be do-it-yourself parts kits to which you add your own manifold.
To me they look really nice I like the surface finish :)
One at a time! 😆Originally Posted by packetrace ↑how much do you plan ?
None of the throttle body adaptors have been machined yet. Only the two flanges so far. I'll be kept busy for a while cleaning and blasting the old manifolds and getting them welded up.
tooter two is ready for the welder... 🙂
Picture not included in this copy
It was just an experiment filling the letters with paint. It'll get burned off with the welding. But it doesn't matter because everything gets bead blasted when it's done anyways.
On to tooter three... 🙂
Picture not included in this copy
It was just an experiment filling the letters with paint. It'll get burned off with the welding. But it doesn't matter because everything gets bead blasted when it's done anyways.
On to tooter three... 🙂
nice thing :D
As of today I'm officially a yarisworld tooter vendor. 🙂
I'm just on a month by month basis, because I don't think this business is going to last very long before it folds. 😆
There's supposed to be a green vendor tooter on my nameplate, but I don't think that's going to be happening.
I'm offering for sale as a complete kit:
1. one welded, assembled, bead blasted tooter manifold
2. one matching throttle body adaptor for either 1NZ 4 bolt 48mm... or 1ZZ 4 bolt 51mm
3. one OEM flat throttle body adaptor gasket
4. three throttle body adaptor allen head bolts
5. one OEM O ring throttle body gasket for 4 bolt 48mm... or one OEM flat throttle body gasket for 4 bolt 51mm
6. one OEM O ring intake manifold gasket
$425 +shipping.
Also offered is a tooter do-it-yourself kit where you supply our own manifold, consisting of:
1. one tooter intake manifold adaptor flange
2. one throttle body adaptor
3. three allen head throttle body adaptor bolts
4. one OEM flat throttle body adaptor gasket
$250 +shipping
Picture not included in this copy
(picture us of an unblasted manifold)
I also offer a tooter manifold with no adaptor which fits a 1ZZ 3 bolt 51mm throttle body for $350 +shipping
You can use all of the same stock intake manifold bolts as well as the 3 stock throttle body studs and 1 bolt on the tooter.
The bead blasted manifold will readily accept paint, powdercoating, or ceramic coating.
If you have any questions feel free to call or email me and I'll be happy to answer them:
My name is Greg. 🙂
.
310-455-3340
greggabi@verizon.net
I'm just on a month by month basis, because I don't think this business is going to last very long before it folds. 😆
There's supposed to be a green vendor tooter on my nameplate, but I don't think that's going to be happening.
I'm offering for sale as a complete kit:
1. one welded, assembled, bead blasted tooter manifold
2. one matching throttle body adaptor for either 1NZ 4 bolt 48mm... or 1ZZ 4 bolt 51mm
3. one OEM flat throttle body adaptor gasket
4. three throttle body adaptor allen head bolts
5. one OEM O ring throttle body gasket for 4 bolt 48mm... or one OEM flat throttle body gasket for 4 bolt 51mm
6. one OEM O ring intake manifold gasket
$425 +shipping.
Also offered is a tooter do-it-yourself kit where you supply our own manifold, consisting of:
1. one tooter intake manifold adaptor flange
2. one throttle body adaptor
3. three allen head throttle body adaptor bolts
4. one OEM flat throttle body adaptor gasket
$250 +shipping
Picture not included in this copy
(picture us of an unblasted manifold)
I also offer a tooter manifold with no adaptor which fits a 1ZZ 3 bolt 51mm throttle body for $350 +shipping
You can use all of the same stock intake manifold bolts as well as the 3 stock throttle body studs and 1 bolt on the tooter.
The bead blasted manifold will readily accept paint, powdercoating, or ceramic coating.
If you have any questions feel free to call or email me and I'll be happy to answer them:
My name is Greg. 🙂
.
310-455-3340
greggabi@verizon.net
Good luck to you as a vendor Greg 👍
Now go and introduce yourself/product in the Sponsor Classified Forum.
Now go and introduce yourself/product in the Sponsor Classified Forum.
Tried to search through this thread for comments on gas mileage to no avail... Any significant difference either way?
He mentioned during his testing over (I think) two tanks of gas that it didn't make any significant difference, possibly a bit higher. It didn't drop at all, however.
Hmmm. I might have to order one of the DIY kits to experiment with one of the 2TZ superchargers that can be readily found for about $300.
Picture not included in this copy
Picture not included in this copy
1 attachment not included in this copy
There was a slight increase but it was not significant. I took the mileage readings from the last 699.6 miles @ 19.508 gallons before installing the tooter,and the average came out to 35.86 mpg. I didn't count the fillup that had the stock dyno runs in it so that the average wouldn't get dragged down.Originally Posted by baseballfan416 ↑Tried to search through this thread for comments on gas mileage to no avail... Any significant difference either way?
Then I took the following 514.0 miles @ 13.133 gallons running with the tooter. Also not counting the fillup that had the the dyno runs, and the average is 39.13 mpg. Not exactly in hypermiler territory. 😆
So even with the peak horsepower and peak torque being essentially the same as the stock manifold, the comparative dyno runs clearly show that the tooter underperformed the stock manifold under wide open throttle conditions. However, it does work very well in normal every day partial throttle driving conditions. When you let out the clutch taking off from a full stop it hardly takes any throttle which is really nice when driving in traffic. 🙂
39 vs 36 = about a 7-8% gain (3 of 36 = 1/12th = 8.5%). That's pretty legitimate!
The reason I'm intrigued by this is because here we have a product that was essentially taken off of a 1.8liter corolla engine (correct me if I'm wrong). That engine, in it's time, was rated 30city 40 or 41hwy mpg? Combine the better "breathing" capacity with a lower displacement and I think this could be of particular interest to the hypermiling crowd. In a way, you don't necessarily want more power to get better mileage, but rather you're trying to make the engine run more efficiently. Hence the -1hp +1tq is an afterthought if it improves overall drive-ability.
If I had the money, I would get an MI pulley, some sort of an intake manifold gasket (to lessen heat soak), this product and either keep the stock tb or get the mystical corolla tb that everyone is so infatuated with. Combine that with an injen intake (assuming anyone ever responds to my wtb thread) and I bet I could break 50-52mpg in the summer (44-46 avg this past summer).
Of course, this would all cost about $700+ so even with a 5% gain in gas mileage, I'd have to drive the car 10-14 years to make up the difference in saved fuel cost.
The reason I'm intrigued by this is because here we have a product that was essentially taken off of a 1.8liter corolla engine (correct me if I'm wrong). That engine, in it's time, was rated 30city 40 or 41hwy mpg? Combine the better "breathing" capacity with a lower displacement and I think this could be of particular interest to the hypermiling crowd. In a way, you don't necessarily want more power to get better mileage, but rather you're trying to make the engine run more efficiently. Hence the -1hp +1tq is an afterthought if it improves overall drive-ability.
If I had the money, I would get an MI pulley, some sort of an intake manifold gasket (to lessen heat soak), this product and either keep the stock tb or get the mystical corolla tb that everyone is so infatuated with. Combine that with an injen intake (assuming anyone ever responds to my wtb thread) and I bet I could break 50-52mpg in the summer (44-46 avg this past summer).
Of course, this would all cost about $700+ so even with a 5% gain in gas mileage, I'd have to drive the car 10-14 years to make up the difference in saved fuel cost.
It would only take about $5,250 in gasoline purchases to pay for the cost of a tooter... without the shipping! 😆Originally Posted by baseballfan416 ↑39 vs 36 = about a 7-8% gain (3 of 36 = 1/12th = 8.5%). That's pretty legitimate!
The reason I'm intrigued by this is because here we have a product that was essentially taken off of a 1.8liter corolla engine (correct me if I'm wrong). That engine, in it's time, was rated 30city 40 or 41hwy mpg? Combine the better "breathing" capacity with a lower displacement and I think this could be of particular interest to the hypermiling crowd.The slightly improved mileage was an unexpected consequence. I was the most concerned with losing driveability at low rpms because the ~20% larger runners. But they are also slightly longer than stock which I think helps some. The tooter would likely work well under a forced induction situation...
Picture not included in this copy
You never really know what's going to happen whenever you adapt something to an unintended purpose. It's a total crapshoot. 😉
I'm picking up the rest of the flanges on Tuesday, and then they're going to start on machining the adaptors. 👍
Am i the first to have confirm to the purchase of one tooter :D?
Yes... you're the first. 🙂
All of the tooter manifold flanges are done now so I can start putting them on the manifolds... 🙂
Picture not included in this copy
The manifolds are all in various stages of being cleaned. They all basically looked like that dark dirty one as they're 14 year old junkyard parts, many from crashed vehicles. They all have scratches and dings, but look pretty decent when they're all cleaned and blasted. 🙂
Picture not included in this copy
The manifolds are all in various stages of being cleaned. They all basically looked like that dark dirty one as they're 14 year old junkyard parts, many from crashed vehicles. They all have scratches and dings, but look pretty decent when they're all cleaned and blasted. 🙂
Manifold'mania🙇
Originally Posted by tooter ↑All of the tooter manifold flanges are done now so I can start putting them on the manifolds... 🙂
Picture not included in this copy
The manifolds are all in various stages of being cleaned. They all basically looked like that dark dirty one as they're 14 year old junkyard parts, many from crashed vehicles. They all have scratches and dings, but look pretty decent when they're all cleaned and blasted. 🙂
With the flanges done, the machining on the adaptors will be starting when I get these larger gaskets so that the adaptor design can be altered to fit them.
Picture not included in this copy
This Corolla gasket is larger then the Yaris one and allows for a 51mm bore. I decided to make just one adaptor which will fit either a 1NZ FE or a 1ZZ FE throttle body. This will allow for an easy upgrade without needing to change anything else.
Picture not included in this copy
This Corolla gasket is larger then the Yaris one and allows for a 51mm bore. I decided to make just one adaptor which will fit either a 1NZ FE or a 1ZZ FE throttle body. This will allow for an easy upgrade without needing to change anything else.
The larger Corolla throttle body base gaskets arrived today... 🙂
Picture not included in this copy
This will be much simpler with just one part that fits both throttle bodies. Now the rest of the adaptors can be machined. Tooter two is with the welder and should be ready tomorrow. Then it goes to the bead blaster... 😉
Picture not included in this copy
This will be much simpler with just one part that fits both throttle bodies. Now the rest of the adaptors can be machined. Tooter two is with the welder and should be ready tomorrow. Then it goes to the bead blaster... 😉
The throttlebody adaptors might be done by the end of next week, and tooter two is all welded up and made it into the blasting booth...
Picture not included in this copy
Picture not included in this copy
Looks like others have also been adapting manifolds. This is an adaptor to mount a 2zz manifold onto a 1zz engine...
Picture not included in this copy
The stock 2ZZ engine makes 180 horsepower.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
The stock 2ZZ engine makes 180 horsepower.
Picture not included in this copy
Picture not included in this copy
wait... so is this your next venture? making a corolla xrs manifold fit the yaris? dooood!
I doubt it... 😆Originally Posted by baseballfan416 ↑wait... so is this your next venture? making a corolla xrs manifold fit the yaris? dooood!
I still don't have a completed 1ZZ manifold yet, as the newely revised adaptors are still in the process of being machined. So far all I have is the running prototype on our daily driver. It's interesting that others have been doing the same manifold adapting idea.
Finally... one completely finished manifold... 🙂
The bead blasting put a nice low luster finish on it and made the welds look a lot better by making all the surfaces take on the same evenly blasted texture. I even blasted the adaptor so that it now has a matte finish similar to the throttlebody...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Tooter #2 one now becomes the daily driver tooter because it had the worst dings in it. They're only cosmetic and are barely visible when looking low from the front, but it's still not fit for sale so I don't mind keeping it for our own use.
I'm still waiting on the adaptors which should be ready any day now. Tooter #3 is ready for the welder, and tooter #1 is going to the blaster. 😉
The bead blasting put a nice low luster finish on it and made the welds look a lot better by making all the surfaces take on the same evenly blasted texture. I even blasted the adaptor so that it now has a matte finish similar to the throttlebody...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Tooter #2 one now becomes the daily driver tooter because it had the worst dings in it. They're only cosmetic and are barely visible when looking low from the front, but it's still not fit for sale so I don't mind keeping it for our own use.
I'm still waiting on the adaptors which should be ready any day now. Tooter #3 is ready for the welder, and tooter #1 is going to the blaster. 😉
Damn, that's sexy! It's like car pr0n...
Looking good!
sexy!
I bought a Simota intake from Buddy Fan (Thanks, Buddy 🙂 ) shortened and bead blasted it to match the manifold. And am waiting on a silicone adaptor to finish it off...
Picture not included in this copy
Test fitting it into the throttlebody...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Test fitting it into the throttlebody...
Picture not included in this copy
Picture not included in this copy
That looks a lot better than before. The only concern is that the sensor is now a lot closer to the filter. Hopefully that won't cause a CEL.
That's just a test fit. It'll be a couple of inches farther away from the MAF sensor when the silicone adaptor coupling is installed.Originally Posted by tk-421 ↑That looks a lot better than before. The only concern is that the sensor is now a lot closer to the filter. Hopefully that won't cause a CEL.
Picture not included in this copy
The aluminium tube is 2.25 inches and the filter is 3 inches. There's plenty of room to move it out farther.
Picture not included in this copy
For all the crazy experiments I've tried, so far I've never gotten a CEL light. 🙂
The silicone adaptor came today less than 36 hours after I had ordered it on ebay. That's speed of light shipping. 😲 So now the intake is ready (plus one more clamp) to install on the throttle body tomorrow... 🙂
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I'm excited to see how the manifold performs with a 1zz throttle body. Good work on keeping this project going!
Also, is that a Simota intake tube for Yaris or for another car? The tube diameter looks larger than the 1nz throttle body. I am using a k&n intake right now and the throttle tube size is nearly identical to the 1nz throttle body diameter, so I knew in the future when I swap to a 1zz throttle body I was going to have to get an intake with a larger diameter tube.
I remember reading something on here something saying that you couldn't go over a certain intake diameter because it would cause the MAF to throw a cel.
Also, is that a Simota intake tube for Yaris or for another car? The tube diameter looks larger than the 1nz throttle body. I am using a k&n intake right now and the throttle tube size is nearly identical to the 1nz throttle body diameter, so I knew in the future when I swap to a 1zz throttle body I was going to have to get an intake with a larger diameter tube.
I remember reading something on here something saying that you couldn't go over a certain intake diameter because it would cause the MAF to throw a cel.
The redesigned adaptors should be done this week, and I''ll be picking up tooter #3 from the welder. So everything is progressing nicely. 🙂Originally Posted by 4/20 NEVER FORGET ↑I'm excited to see how the manifold performs with a 1zz throttle body. Good work on keeping this project going!
Also, is that a Simota intake tube for Yaris or for another car? The tube diameter looks larger than the 1nz throttle body.It's for a Yaris. The tubing actually flares out to a larger diameter only where it connects to the silicone coupling at the throttle body...
Picture not included in this copy
...but is 2.25 inches at the MAF sensor which is the same as the Weapon R intake I've been using...
Picture not included in this copy
The Weapon R flares out to 2.5" in front of the MAF sensor while the Simota remans at 2.25" but then flares out to 3" to fit the air filter.
I am using a k&n intake right now and the throttle tube size is nearly identical to the 1nz throttle body diameter, so I knew in the future when I swap to a 1zz throttle body I was going to have to get an intake with a larger diameter tube.Yes. The K&N Typhoons are straight 2.25" tubing all the way through to the air filter. You raised an interesting point. To use the same MAF sensor with the 1ZZ throttle body, the MAF tubing section will still need to be 2.25" for it to work properly. But there are lots of intakes that go to larger diameter tubing in front of the MAF section, so all you would need is a silicone coupler to fit. The Simota appears to already address this situation as it flares to 2.5 and uses a reducer coupling to fit onto the 1NZ throttle body. If it was used with a 1ZZ throttle body, it would use a simple straight coupler.
I remember reading something on here something saying that you couldn't go over a certain intake diameter because it would cause the MAF to throw a cel.I've tried a few different intake configurations, but all of them are with the MAF tubing section at 2.25" and have never gotten a CEL light. So the front side of the 2.25" MAF section can be almost anything else. 👍
Got the intake mounted and it fits fine...
Picture not included in this copy
Picture not included in this copy
Next comes the test drive. (oooh, goody 🙂 )
edit: The engine runs great... and no CEL light. 👍
Picture not included in this copy
Picture not included in this copy
Next comes the test drive. (oooh, goody 🙂 )
edit: The engine runs great... and no CEL light. 👍
I see, thanks for the explanation. That's weird that the intake flares out right before meeting the throttle body. On the K&N it does not flare out so it doesn't require a reduced coupler.
I believe it was specifically manufactured that way so that just one MAF tube would be able to fit both the 1NZ and 1ZZ throttle bodies.
Pretty clever idea, actually.🙂
Pretty clever idea, actually.🙂
It just occurred to me that you could use your K&N with a 1ZZ throttle body. All it would take is a 2.25" to 2.5" silicone adaptor with the larger end put onto your throttle body. 👍Originally Posted by 4/20 NEVER FORGET ↑I see, thanks for the explanation. That's weird that the intake flares out right before meeting the throttle body. On the K&N it does not flare out so it doesn't require a reduced coupler.
My memory is probably quite bad, not sure if the original tubing is hugging the battery.
Any issues there? i see from the picture that the grey tubing is up against the battery.
Any issues there? i see from the picture that the grey tubing is up against the battery.
The tubing touches the corner of the battery because the tooter manifold relocates the throttle body a couple of inches to the right. However, it doesn't cause any problems as there isn't enough pressure on the corner to kink the tubing.
The first run of redesigned adaptors is done. The advantage of these are that just one part works for both the 48mm 1NZ FE throttle bodies and the larger 51mm 1ZZ FE throttle bodies... 🙂
Picture not included in this copy
There was a clearance issue with one of the hex head bolts and the larger diameter throttle body gasket. The solution was to simply reduce the diameter of the head with a grinder...
Picture not included in this copy
The larger 1ZZ FE gasket fits perfectly. Just finished bead blasting, and it's ready to install on a manifold. 🙂
Picture not included in this copy
Picture not included in this copy
There was a clearance issue with one of the hex head bolts and the larger diameter throttle body gasket. The solution was to simply reduce the diameter of the head with a grinder...
Picture not included in this copy
The larger 1ZZ FE gasket fits perfectly. Just finished bead blasting, and it's ready to install on a manifold. 🙂
Picture not included in this copy
Again with the car pr0n! Looks great, too!
Have you done a test fit yet to make sure the 1NZ TB seals properly on the car running?
Not yet, as I just got the adaptors this afternoon...Originally Posted by Bluevitz-rs ↑Have you done a test fit yet to make sure the 1NZ TB seals properly on the car running?
The 3mm larger diameter O ring gasket means a perimeter radius difference of only 1.5mm larger all the way around which isn't a lot.
Picture not included in this copy
The 1NZ FE throttle body base has a much larger flat area on it's base than that. I'll be running a new adaptor this coming week to confirm that everything works.
I'm very interested to see if this makes power with the 1zz throttle body, which it should.
Keep up the good work!
Keep up the good work!
One tooter manifold with the redesigned adaptor adapter is now complete... 🙂
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Now just one 51mm bore adaptor plate fits both the 1NZ FE and 1ZZ FE throttle bodies. 👍
The tooter uses all of the stock Toyota head bolts, studs, and nuts, and the stock Toyota O ring manifold gasket. It uses a Toyota 1ZZ FE throttle body O ring gasket which works fine with the smaller 1NZ FE throttle body, and uses all of the stock throttle body studs, nuts, and bolt. The manifold flange is hand clearanced fit to the head perfectly and simply drops right in.
Not too bad for a wrecked dirty 14 year old junkyard part. 😉
It requires the intake to be shortened because the throttle body is repositioned about 2 inches to your right as you're looking at the engine from the front of the car.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Now just one 51mm bore adaptor plate fits both the 1NZ FE and 1ZZ FE throttle bodies. 👍
The tooter uses all of the stock Toyota head bolts, studs, and nuts, and the stock Toyota O ring manifold gasket. It uses a Toyota 1ZZ FE throttle body O ring gasket which works fine with the smaller 1NZ FE throttle body, and uses all of the stock throttle body studs, nuts, and bolt. The manifold flange is hand clearanced fit to the head perfectly and simply drops right in.
Not too bad for a wrecked dirty 14 year old junkyard part. 😉
It requires the intake to be shortened because the throttle body is repositioned about 2 inches to your right as you're looking at the engine from the front of the car.
Looks great! When is dyno day?
Soon... :)
Whenever I can find some time off from work. Lately, I've been swamped. This time it's going to be back to back runs on the same day to get an apples to apples comparison. I still need to work on adapting the BLOX velocity stack intake to eliminate the 90 degree bend while still fitting in the available space. I already have the new design down, and the raw materials have arrived, but I still need to find the time to cut and fit everything together.
Whenever I can find some time off from work. Lately, I've been swamped. This time it's going to be back to back runs on the same day to get an apples to apples comparison. I still need to work on adapting the BLOX velocity stack intake to eliminate the 90 degree bend while still fitting in the available space. I already have the new design down, and the raw materials have arrived, but I still need to find the time to cut and fit everything together.
Are you using a 1ZZ throttle body now for everyday driving? How's that working out?