cali yarisOriginal postCanoga Park, CA · Aug 28, 2012#1We got our prototype installed last night. Overall: SUCCESS.
There were some issues with hose lengths, and we were unable to use the stock airbox, because the throttle body was moved to the driver side by a couple of inches.
I'll post pics of the install with more detail next, but here's a shot of the intake (keep in mind it's an unfinished prototype)
Picture not included in this copy
Replies 466
fnkngrvIn The Hotbox · Aug 28, 2012#2Is your testbed a boosted or NA car?
eTiMaGoBangkok, Thailand · Aug 28, 2012#3tubular, dude!
g.q.viosOrange County · Aug 28, 2012#4thats awsome garm!!!
Looks, like when im ready to start messing w/ the engine. I can buy most of my parts from you!!!
justjesusOrange County · Aug 28, 2012#5THAT is an ufinished prototype?! :o
looks neat.
1.5Tampa · Aug 28, 2012#6Wow just the look of this thing gets me excited lol
Also curious if it is being tested on N/A or F/I.
And I am sure we will be getting a dyno as well...
cali yarisThread starterCanoga Park, CA · Aug 28, 2012#7This was installed on a bone stock Yaris. Only way to do a fair test. I wanted to use the stock airbox, but it wasn't possible, so we made up a little short ram -- this will be used for both dyno runs, so it won't make a difference in results.
Car was driven about 70+ miles last night, and will be used for daily commuting this week. No CEL's yet, ECU still in "relearn" of course.
pics up next
fnkngrvIn The Hotbox · Aug 28, 2012#8^ ok, good to know. 🎉
cali yarisThread starterCanoga Park, CA · Aug 28, 2012#9You'll see that we re-used the stock rubber intake hose, a short MAF tube and an air filter for our 'short ram' intake. It's a little mickey mouse, but it works and we used the parts we had on hand.
Some vac hoses had to be lengthened, this could be fixed by changing the location of the fitting on the mani, or we can include a replacement hose kit. Too soon to work on that.
The runners are just about as long as they can be without touching anything. Had to work the mani down in there carefully.
**The mani is made for a 1ZZ throttle body; note that we installed the stock throttle body, we'll see how that works out. I figure not everyone wants to pop for a different throttle body if they don't have to. So more testing there is probable.
AWAITING THE VICTIM'S CAR
Picture not included in this copy
STOCK
Picture not included in this copy
APART
Picture not included in this copy
IN PLACE
Picture not included in this copy
INSTALLED
Picture not included in this copy
g.q.viosOrange County · Aug 28, 2012#10awsome...subscribed...🤤
1.5Tampa · Aug 28, 2012#11nice
marcustoronto, canada · Aug 28, 2012#12SUBSCRIBED!!!!!🤤🤤🤤
xnamerxxso cal · Aug 28, 2012#13 Micro Bullshit AKA TBR
I don't wanna be a dick or anything but your intake looks awfully similar to the WR intake down to the welds and the runner length.
Even eyeballing I can see Garm's runner length as being way longer plus he has Velocity stacks in the plenum where its clear yours doesn't and his runnings are a much smoother path.
GolddeenohColumbia, SC · Aug 28, 2012#14Gratz Micro Image on the prototype, and does it come in red! 😁
Jason@SportsCarDebary, FL · Aug 28, 2012#15 Originally Posted by
cali yaris ↑ AWAITING THE VICTIM'S CAR
Picture not included in this copy
Wow, look how clean your shop is.
cali yarisThread starterCanoga Park, CA · Aug 28, 2012#16 Gratz Micro Image on the prototype, and does it come in red!
If it works out, I'll make you a red one. 👍
(thanks for the cleanup, Mods)
justjesusOrange County · Aug 28, 2012#17in the end, does it really matter who GE works with?
If somebody builds an intake, somebody will probably buy it.
suckerfaceMilwaukee, WI · Aug 28, 2012#18 Originally Posted by
cali yaris ↑ (thanks for the cleanup, Mods)
+1...even though I was a large portion of the problem 😳
xnamerxxso cal · Aug 28, 2012#19 Originally Posted by Micro Bullshit ↑
it's called pattens and they take time. Same reason you won't find Weapon-r sueing either.
the proof is in the pics. or heres a thought call GE.
I don't believe Garm stole your intake design but if you spent the money for GE to develop these solely for your company without getting an NDA your an idiot.
Looking at the pictures and they look clearly different down to the angle of the throttle body and the length of the runners.
I'm sorry but telling me to do your work for you is just lazy. The proof is on you.
1.5Tampa · Aug 28, 2012#20Oh no I missed some TBR drama...
AstromanWenatchee, WA · Aug 28, 2012#21Drool!
cali yarisThread starterCanoga Park, CA · Aug 28, 2012#22 Wow, look how clean your shop is.
It's temporary, unfortunately!
xnamerxxso cal · Aug 28, 2012#23When's the dyno test?
cali yarisThread starterCanoga Park, CA · Aug 28, 2012#24End of this week to mid next week... got Labor Day this weekend which includes Monday.
tooterLos Angeles · Aug 28, 2012#25 Originally Posted by
cali yaris ↑ We got our prototype installed last night. Overall: SUCCESS.
I'm happy for you, Garm. 🙂
It looks
super! 👍
There were some issues with hose lengths, and we were unable to use the stock airbox, because the throttle body was moved to the driver side by a couple of inches.
I know! 😆 I had exactly the same issue with mine... except that it ended up being almost 3 inches.
I'll post pics of the install with more detail next, but here's a shot of the intake (keep in mind it's an unfinished prototype)
Picture not included in this copy
Your's looks much better than the Weapon R because they pieced their runner halves together...
Picture not included in this copy How long are the runners? They look longer than the Weapon R's which should be good for low end. 👍
Just for comparison, Richard Holdener also pieced his runners together, and staggered them into a larger plenum.
Picture not included in this copy cali yarisThread starterCanoga Park, CA · Aug 28, 2012#26Thanks tooter!
Let's just say "longer" for now. 🙂
This is the only manifold with this exactl runner length, don't let anyone tell you different (you know who I mean).
tooterLos Angeles · Aug 28, 2012#27 Originally Posted by
cali yaris ↑ Thanks tooter!
Let's just say "longer" for now. 🙂
This is the only manifold with this exactl runner length, don't let anyone tell you different (you know who I mean).
I was working and missed what happened today... but I think I know who you mean from the blast marks left behind. 😉
From the larg diameter welds on the plenum side of the runners, it appears that you incorporated velocity stacks. That's a
definite advantage. 🙂
Are you going to come up with a modified normally aspirated intake to match your manifold? Just asking, because if it fit your altered throttle body position it would likely fit mine, too. 😆
cali yarisThread starterCanoga Park, CA · Aug 28, 2012#28^ I'm not sure yet. Let's see if it makes any power first.
packetraceQuebec · Aug 28, 2012#29does it have the same angle for tb then stock one ?
Garm..on your car ....it has short runners right ?
justjesusOrange County · Aug 28, 2012#30power!
I'm power hungry. I need power.
I need some NOS. Give me the big one... no, give me two of them
Ahh look it's the long awaited manifold. Dibs!
4/20 NEVER FORGETPortland, OR · Aug 28, 2012#32Look at the length of those runners... hot!
I can't wait to see the dyno results. If it does make power (which is should judging by the design) I'll be ready to purchase and slap on my 1zz TB. Congrats guys for moving forward on this!
Edit: like seriously, pm me as soon a these come available for purchase
cali yarisThread starterCanoga Park, CA · Aug 28, 2012#33^ ha, don't worry! Next step is some more driving, then dyno pulls. It will all be posted here, no hidden information, no bullshit, no drama. 😁
packetraceQuebec · Aug 28, 2012#34I got to agree that it looks really good!! I like the runners...
Does it have the same angle for the TB then stock manifold ?...I mean...except for the lenght...does the angle is the same...I would only need to cut the CAI piping..?
Bluevitz-rsOshawa, Ontario, Canada · Aug 28, 2012#35Is there going to be a 3 bolt TB option? Is it at all possible to make the mounting flange universal to fit either TB?
scioncrewHB · Aug 28, 2012#36manifold looks good Garm
ViperoniBrampton, ON · Aug 28, 2012#37Lookin good, dyno time now :D
Bar_Red_YarisPuerto Rico, Oeste · Aug 28, 2012#38I so want this now!!!
eTiMaGoBangkok, Thailand · Aug 28, 2012#39 Originally Posted by
justjesus ↑ I need some NOS. Give me the big one... no, give me two of them
"I need NOS, two bottles... the big ones"
jeez don't you know your classics? 😁
cali yarisThread starterCanoga Park, CA · Aug 29, 2012#40I can probably do a 3-bolt option, but I'll need throttle body to work with. We'll get to that after the dyno and "yes or no" day.
thanks Art. Should I make a 70mm TB one? 🙇
xnamerxxso cal · Aug 29, 2012#41 Originally Posted by Brian O'Conner
"I need NOS, two bottles... the big ones"
Originally Posted by Harry
"Amateurs don't use Nitrous Oxide, I've seen the way you drive you've got a heavy foot."
🤣
scioncrewHB · Aug 29, 2012#42 Originally Posted by
cali yaris ↑ I can probably do a 3-bolt option, but I'll need throttle body to work with. We'll get to that after the dyno and "yes or no" day.
thanks Art. Should I make a 70mm TB one? 🙇
dont see why not. 👍
justjesusOrange County · Aug 29, 2012#43 Originally Posted by
eTiMaGo ↑ "I need NOS, two bottles... the big ones"
jeez don't you know your classics? 😁
YES! Normally.... but not after having a "NOS leak" in my car.
eTiMaGoBangkok, Thailand · Aug 29, 2012#44was there a danger to your manifold?
xnamerxxso cal · Aug 29, 2012#45I think he blew the welds on his intake manifold.
cali yarisThread starterCanoga Park, CA · Aug 29, 2012#46I think I missed something. 🤷
xnamerxxso cal · Aug 29, 2012#47 Originally Posted by
cali yaris ↑ I think I missed something. 🤷
This doesn't concern you go back inside.🤣
Fast and the furious references.
cali yarisThread starterCanoga Park, CA · Aug 29, 2012#48justjesusOrange County · Aug 29, 2012#49 Originally Posted by
xnamerxx ↑ I think he blew the welds on his intake manifold.
Thanks Namer. You answered Etimago's question the way I would have.
Or maybe I would have went with the floor board?
Originally Posted by
cali yaris ↑ I think I missed something. 🤷
Oh Garm. Do I need to explain NOS to you again. hehehe
no reference to Garm, but one of my favorite t-shirts :)
Picture not included in this copy GolddeenohColumbia, SC · Aug 29, 2012#50Red?
Red?
Red?
Red?
Red?
Red?
Red?