No. I only have the stock 1NZ FE throttle body that came with my car.Originally Posted by 4/20 NEVER FORGET ↑Are you using a 1ZZ throttle body now for everyday driving? How's that working out?
tooter's manifold adventure...
1,454 posts · 559,522 views · page 19 of 30
Replies continued
Can't believe I had missed this thread. Awesome job Tooter. I have a Weapon R intake manifold, and a Gude bored out T/B if ya want to add it to your dyno test pulls. :) Probably going to have to purchase the DIY kit from you seeing as how I have a 1ZZ manifold laying around....and a turbo waiting to go onto that. Would be interesting to once and for all "expose" what some of these parts do. Thanks to all for the great read!
That idea of testing the Weapon R is intriguing and I'd be curious as to how it works, but sorry, I already pay enough for my own testing. It would be nice if Weapon R published dyno tests of their own manifolds.Originally Posted by jetblast ↑Can't believe I had missed this thread. Awesome job Tooter. I have a Weapon R intake manifold, and a Gude bored out T/B if ya want to add it to your dyno test pulls. :) Probably going to have to purchase the DIY kit from you seeing as how I have a 1ZZ manifold laying around....and a turbo waiting to go onto that. Would be interesting to once and for all "expose" what some of these parts do. Thanks to all for the great read!
I'm going to be doing back to back stock manifold/tooter dyno runs on the same day this coming week if I can get off of work.
The tooter Do-It-Yourself kits are available for $250 +$12 shipping.
Picture not included in this copy
...and you can build your own. 🙂
Picture not included in this copy
If you are interested you can either PM me here, or call 310-455-3340, or email me at: greggabi@verizon.net
Doh! Realized after I re-read what I posted that I didn't mean to sound like I was trying to dump testing costs on you....sorry. When I get back from this tour I'll touch base with you on the purchase. I can gear up on my end and test both manifolds with/and without turbo. My personal taste is gonna be polishing that beast. Thanks again for some great brain food!
Greetings from a place in the world where everyone hates us. :)
Greetings from a place in the world where everyone hates us. :)
Hey, no problem, jet, 🙂Originally Posted by jetblast ↑Doh! Realized after I re-read what I posted that I didn't mean to sound like I was trying to dump testing costs on you....sorry. When I get back from this tour I'll touch base with you on the purchase. I can gear up on my end and test both manifolds with/and without turbo. My personal taste is gonna be polishing that beast. Thanks again for some great brain food!
Greetings from a place in the world where everyone hates us. :)
Didn't know you're in the Military. I did a tour in 'nam so I know what it's like. Keep safe and come home in one piece. 👍
Polished would look super. With those shiny pipes snaking around, your engine will look like a formula 1 racer. 🙂
Take Care,
Greg
Your tooter sure does look purty.
I wouldn't mind having one of those to spruce up my, otherwise plain engine bay. No money for it tho. LOL
I wouldn't mind having one of those to spruce up my, otherwise plain engine bay. No money for it tho. LOL
That's ok. chaotic... it's always better to live within our means.👍
I came up with a way to fit the BLOX velocity stack air filter assembly onto the tooter without needing the 90 degree bend connector. 🙂
First I got some aluminium pipe which is 6 inches outside diameter from a really cool place called:
intakehoses.com
Then I cut off a 2 inch section and glued it to the backside of the velocity stack...
Picture not included in this copy
Picture not included in this copy
then slipped the assembly inside the air filter...
Picture not included in this copy
And it's all done... 🙂
Picture not included in this copy
Picture not included in this copy
Gonna go put it on the engine now...
I came up with a way to fit the BLOX velocity stack air filter assembly onto the tooter without needing the 90 degree bend connector. 🙂
First I got some aluminium pipe which is 6 inches outside diameter from a really cool place called:
intakehoses.com
Then I cut off a 2 inch section and glued it to the backside of the velocity stack...
Picture not included in this copy
Picture not included in this copy
then slipped the assembly inside the air filter...
Picture not included in this copy
And it's all done... 🙂
Picture not included in this copy
Picture not included in this copy
Gonna go put it on the engine now...
"Like a glooove... "
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
very good thinking!
Not in the military any more, just flyin' them supplies....and unfortunately sometimes the fallen hero's home.
On a lighter note, I always have room for some more sparkling things. Note to self, buy large aluminum chain so wife can wear some of this bling. :)
On a lighter note, I always have room for some more sparkling things. Note to self, buy large aluminum chain so wife can wear some of this bling. :)
1 attachment not included in this copy
Oooh... shiny. 🙂
Since I've had the cabinet, everything gets stainless steel bead blasted. Does your XB have a 1.5 or a 1.8? And what kind of aircraft do you pilot?
Greg
Since I've had the cabinet, everything gets stainless steel bead blasted. Does your XB have a 1.5 or a 1.8? And what kind of aircraft do you pilot?
Greg
I enjoy coming up with nonordinary outside-the-box solutions. Once the idea came to me, the real challenge was trying to find outside diameter pipe. Most all pipe is sized by inside dimensions. However engine intake pipes go by even outside measurements. That website intakehoses.com has all the specialized raw materials to build your own custom designed air intakes as well as intake manifolds. Now that there's a reliable source of materials, I'm already thinking up other ideas to try out.😉Originally Posted by Bluevitz-rs ↑very good thinking!
Picture not included in this copy
Picture not included in this copy
I'm a 747 cargo flying tech....I slap pilots when they get stupid. Ego's incorporated.
Love the smoothness of that intake flow. Nice find!
Modding the 1.5 up to a 1.8, sigh, dreamin'.
Love the smoothness of that intake flow. Nice find!
Modding the 1.5 up to a 1.8, sigh, dreamin'.
I would think that just keeping them awake was good enough. 😆Originally Posted by jetblast ↑I'm a 747 cargo flying tech....I slap pilots when they get stupid. Ego's incorporated.
Love the smoothness of that intake flow. Nice find!Thanks, jet...🙂 flow design has always fascinated me so it's been really fun experimenting with this manifold project. Everything leads to something else so I'm always on the lookout to see what new idea comes to me next. 😉
Greg
Just finished bead blasting the throttle body adaptor and the MAF tube so that everything matches now...
Picture not included in this copy
Picture not included in this copy
I know on extremely hot days my (heat transferring aluminum) Weapon R intake manifold drops power, but I still like the look. As far as looks go, that project you finished looks smokin'. Thermodynamic efficiency aside, even Toyota/Scion would admit that's one sweet looking motor. Nice job!!!!
Yes, heat soak becomes a factor with a hot start on a really hot day, but the tubing on the long runners is really thin with lots of surface area for air to flow over and to dissipate the heat when the car is moving.
why not wrap it in heat reflective tape or polish it to reflect heat.
I don't think heatsoak is enough of an issue to bother about once the car is in motion. However, polishing just for the bling of it would be neato. 🙂
How about one of the new Plasti-Dip colors, topped off with their Metalizer for a bit of bling. This would insulate too....and easy to peel off if the results sucked. :)
I like black...
...so I might see what it looks like with a cheap rattlecan coat of high heat BBQ.
If it doesn't look good, it can easily be removed. 🙂
...so I might see what it looks like with a cheap rattlecan coat of high heat BBQ.
If it doesn't look good, it can easily be removed. 🙂
Did back to back stock manifold and tooter dyno runs today with the modified BLOX intake. 🙂
Tooter is blue, and stock is red.
Picture not included in this copy
Picture not included in this copy
Tooter is blue, and stock is red.
Picture not included in this copy
Picture not included in this copy
Awesome to see some gains!!
It was a more accurate comparison to dyno both on the same day. We did 3 runs of each and took the best run from each manifold. Both horsepowers track really close with a slight tooter edge at about 5,500. The stock manifold torque curve is a lot smoother and more consistent than the tooter at wide open throttle, although in regular partial throttle driving the difference is too small to detect.
We discovered that the 2012 Yaris gives off a lot of radio frequency interference that was interfering with the dyno hardware, and found that grounding the car with battery jumper cables was the solution.
So if any of you have 2012's... ground them when you run them on a dyno. 👍
We discovered that the 2012 Yaris gives off a lot of radio frequency interference that was interfering with the dyno hardware, and found that grounding the car with battery jumper cables was the solution.
So if any of you have 2012's... ground them when you run them on a dyno. 👍
^ Grounding kit might be a good mod on the 2012.
Internal component to chassis grounding wasn't the problem, it was grounding the whole car that resolved the issue. 👍
We connected battery jumper cables to the exhaust pipe spring bolts where the axle back connects, and then clamped them onto steel bolts that were embedded in the concrete floor... and everything worked just fine.
We connected battery jumper cables to the exhaust pipe spring bolts where the axle back connects, and then clamped them onto steel bolts that were embedded in the concrete floor... and everything worked just fine.
Just can't get enough of that intake pic. I have rods and pistons to get....must stay focused.
The interference is your car's way of broadcasting to others to get the hell outta the way, one bad Yaris comin' through!!!!
The interference is your car's way of broadcasting to others to get the hell outta the way, one bad Yaris comin' through!!!!
This dyno was with the 1ZZ TB, yes?
No. These runs were done with just the bone stock 1NZ throttlebody and ECU, no engine tuning, and regular 87 octane gas. I did refine the intake flow eliminating the 90 degree bend by shortening the effective length of the air filter.Originally Posted by cali yaris ↑This dyno was with the 1ZZ TB, yes?
Doing all the runs at the same time yielded an accurate apples to apples comparison of the two manifolds. Absolutely nothing was done either to dinimish the performance of the stock manifold or to enhance the tooter. The two compared runs were the best ones from each group of three. Exactly the same intake was used on both sets of runs so that the only difference was the manifolds themselves. while at wide open throttle, the tooter gives up a little bit of torque to gain a little bit of horsepower, under regular driving conditions the difference is too slight to notice. I believe that it would really shine in a forced induction setup.
Overall, I'm pleased with the results. 🙂
After a couple of thousand miles of everyday driving with the tooter, it performs very well and continues to yield 2 mpg better mileage under real world everyday driving conditions over the stock manifold. After the dyno runs, I topped off the tank and drove around running errands for the rest of the day with the stock manifold, and watched the computer mileage average drop consistent with the mileage average I was getting before installing the tooter. I had no control over this, as it was just plain dumb luck. The two manifold designs are so completely different from each other, you never know what's going to happen.
This all was just a wild crapshoot by a total amateur. 😉
Neither can I... 😉Originally Posted by jetblast ↑Just can't get enough of that intake pic.
You know, it's really strange that the whole inspiration for this project began with aesthetic appeal. The unique flowing form of the manifold was so beautiful like a formula one racing exhaust I wanted to put it on my Yaris.
Finally there's one completely finished tooter intake manifold offered for sale. It includes:
1. One clean, welded, bead blasted, Corolla 1.8 intake manifold modified to fit a 1.5 Yaris.
2. One OEM O ring intake manifold gasket
3. One matching throttle body adaptor that fits botha 1NZ FE 48mm or 1ZZ 51mm throttle body
4. One OEM flat throttle body adaptor gasket
5. Three throttle body adaptor allen head bolts
$450 includes free shipping
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Also offered for sale is a tooter do it yourself build your own intake manifold kit where you supply the junkyard Corolla manifold. It consists of:
1. one tooter intake manifold adaptor flange
2. one throttle body adaptor
3. three allen head throttle body adaptor bolts
4. one OEM flat throttle body adaptor gasket
$265 includes free shipping
Picture not included in this copy
Contact info:
PM tooter here.
Or email:
greggabi@verizon.net
Or call:
310-455-3340
Ask for Greg 🙂
It's also up for sale on Ebay.
1. One clean, welded, bead blasted, Corolla 1.8 intake manifold modified to fit a 1.5 Yaris.
2. One OEM O ring intake manifold gasket
3. One matching throttle body adaptor that fits botha 1NZ FE 48mm or 1ZZ 51mm throttle body
4. One OEM flat throttle body adaptor gasket
5. Three throttle body adaptor allen head bolts
$450 includes free shipping
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Also offered for sale is a tooter do it yourself build your own intake manifold kit where you supply the junkyard Corolla manifold. It consists of:
1. one tooter intake manifold adaptor flange
2. one throttle body adaptor
3. three allen head throttle body adaptor bolts
4. one OEM flat throttle body adaptor gasket
$265 includes free shipping
Picture not included in this copy
Contact info:
PM tooter here.
Or email:
greggabi@verizon.net
Or call:
310-455-3340
Ask for Greg 🙂
It's also up for sale on Ebay.
That thread on intakes and gas mileage got me to thinking if the stock air box would be able to fit a tooter intake manifold, so I had a go at it... 🙂
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
To make the stock air box fit, I simply cut the flexible rubber coupling back to the first bump, screw clamped it onto the throttle body and installed the air box lid. The rubber coupling is fully compressed while putting on the lid, but it relaxes some when it's in position to engage the two metal clips. The bumped area that now fits over the point of attachment on the air box lid is smaller than the part that was cut off and fits on really tight. A little Armorall really helped it to slide on.
The rubber coupling already has an offset molded into it at the throttle body so I rotated it slightly to point more towards the air box. It fits fine with no stretching or kinking.
I'm going to experiment driving it around for a few fillups under cold weather conditions and check the gas mileage just to see if there is any difference compared to the SRI.
So now the manifold not only uses the stock intake manifold gasket, all of the stock attaching hardware, and all of the stock throttle body mounting hardware, it also works with the stock air box making it a true "bolt on" accessory that almost looks like it came that way from the factory. 🙂
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
To make the stock air box fit, I simply cut the flexible rubber coupling back to the first bump, screw clamped it onto the throttle body and installed the air box lid. The rubber coupling is fully compressed while putting on the lid, but it relaxes some when it's in position to engage the two metal clips. The bumped area that now fits over the point of attachment on the air box lid is smaller than the part that was cut off and fits on really tight. A little Armorall really helped it to slide on.
The rubber coupling already has an offset molded into it at the throttle body so I rotated it slightly to point more towards the air box. It fits fine with no stretching or kinking.
I'm going to experiment driving it around for a few fillups under cold weather conditions and check the gas mileage just to see if there is any difference compared to the SRI.
So now the manifold not only uses the stock intake manifold gasket, all of the stock attaching hardware, and all of the stock throttle body mounting hardware, it also works with the stock air box making it a true "bolt on" accessory that almost looks like it came that way from the factory. 🙂
When can I start having your babies?
Sorry, Cranky... I'm already a Grandpa. 😆Originally Posted by CrankyOldMan ↑When can I start having your babies?
My goal was to make a bolt on manifold that could easily be installed with a minimum of time and effort while utilizing all of the existing hardware and peripheries... and I did it. 🙂
Are you going to Dyno it with the 1ZZ throttle body? That is the throttle body that this intake was designed for, so I would bet you would see some gains in hp and torque. If you do see gains, I would bet that you could sell a lot more of those manifolds.
I don't think I'll be dynoing it with a 1ZZ as I'm more of an economy driver than a performance one. The manifold is not only designed for the 1ZZ throttle body, it was also designed for a 1.8 engine so I don't think it would make that much difference in an normally aspirated application. However, a forced induction situation would be a completely different story. Even at the tooter's best +4hp at 5,600rpm that isn't nearly enough to be detected in actual driving. And remember that's at wide open throttle. Most driving is at partial throttle, where the difference between the tooter and stock manifold is too slight to feel. We've been running it on our daily driver Yaris for over 2,000 miles now and it works just fine. And the stock air box really quiets down the intake. 🙂Originally Posted by Autocross72 ↑Are you going to Dyno it with the 1ZZ throttle body? That is the throttle body that this intake was designed for, so I would bet you would see some gains in hp and torque. If you do see gains, I would bet that you could sell a lot more of those manifolds.
Awe the video ends just before the climax!
The engine hit the rev limiter really hard so the video ends right at the first stutter. 😉Originally Posted by Bluevitz-rs ↑Awe the video ends just before the climax!
You're killing me here, man. You've come so far that not sourcing a 1ZZ TB and dynoing it seems weird to me, like you're aborting the project early. You even had the TB adapter made to match the 1ZZ throttle body, yet you aren't going to at least try and get one?Originally Posted by tooter ↑I don't think I'll be dynoing it with a 1ZZ as I'm more of an economy driver than a performance one. The manifold is not only designed for the 1ZZ throttle body, it was also designed for a 1.8 engine so I don't think it would make that much difference in an normally aspirated application. However, a forced induction situation would be a completely different story. Even at the tooter's best +4hp at 5,600rpm that isn't nearly enough to be detected in actual driving. And remember that's at wide open throttle. Most driving is at partial throttle, where the difference between the tooter and stock manifold is too slight to feel. We've been running it on our daily driver Yaris for over 2,000 miles now and it works just fine. And the stock air box really quiets down the intake. 🙂
Ok, I'll get one and dyno it even though that wasn't the goal. 🙂Originally Posted by 4/20 NEVER FORGET ↑You're killing me here, man. You've come so far that not sourcing a 1ZZ TB and dynoing it seems weird to me, like you're aborting the project early. You even had the TB adapter made to match the 1ZZ throttle body, yet you aren't going to at least try and get one?
Making the tooter fit both throttle bodies without any extra parts was an afterthought so that I wouldn't have to stock 2 adaptors. In fact it actually fits three, the stock 51mm three bolt cable controlled throttle body.
I still think that the results will be similar as these back to back runs (stock:red tooter:blue) done on the same day...
Picture not included in this copy
the stock engine is only capable of taking in so much air/fuel.
not sourcing a 1ZZ TB and dynoing it seems weird to me, like you're aborting the project early.The tooter looks great but doesn't make power. Testing it with another TB is up to tooter; I respect his call either way -- he has to pay for the dyno.
It ~might~ be, Tolmach... 🙂Originally Posted by TOLMACH ↑Holly Sh..t, haven't checked this thread for a while..
Am I dreaming or this (part in the middle) is what I need to install my Xb/Echo Blitz Sc on my Yaris?
Picture not included in this copy
Here's how you can find out for sure...
The three manifold bolts form a triangle with sides of 57mm, 71mm, and 75mm... and the four throttle body stud holes are 60mm square.
Sorry, that was my typo. You're right, it's 67 and not 57...Originally Posted by TOLMACH ↑^ Thanks
I am getting 71, 75 and 67 mm (instead of 57 that you indicated) with 46 mm internal hole diameter. I suspect you have 67 mm in your picture as well (Judging by the gasket in your pic). My TB bolts measure 60 mm, 60 mm, 60 mm, 60 mm.
Can you pls double check this 57 vs 67 mm issue as well as the internal diameter of the hole?
Picture not included in this copy
The center hole is 5mm larger than yours is. It's 51mm which was designed to exactly match the Corolla 1.8 manifold. That would mean a 2.5mm forward facing lip on the inner diameter of your manifold which should be flared out with a hand file or Dremel to create a smooth transition. With the adaptor bolted on, a sharp scribe could be run around the inside circumfrence to exactly mark the lip so that you'd know exactly what to remove. Aluminium is really soft and works easily.
You'd also want to be sure that the throttle body butterfly tips in at the right attitude so as to clear the screen on the O ring gasket. Although with forced induction, I'm not really sure that screen would matter and could simply be clipped off if it was a problem. 🙂
Back when I worked on Hondas, when we would swap intake manifolds, whenever possible we would include whatever the largest stock throttle body that would fit the manifold. I think we have a similar case here, while not a huge bottle-neck, it's a bottle neck to the system, and you did make the adapter to fit the larger throttle body.Originally Posted by tooter ↑Ok, I'll get one and dyno it even though that wasn't the goal. 🙂
Making the tooter fit both throttle bodies without any extra parts was an afterthought so that I wouldn't have to stock 2 adaptors. In fact it actually fits three, the stock 51mm three bolt cable controlled throttle body.
I still think that the results will be similar as these back to back runs (stock:red tooter:blue) done on the same day...
I'm sorry if I came off harsh at all in my last post, I've enjoyed this thread and your tinkering that has led you to where you are. It's a good looking manifold, and it was designed for a larger throttle body than that which you are using, and it's an easy swap to the larger 1ZZ. You have to at least try :) I think there are many others who are following the thread that are also very interested. I think with the change will come more tinkering, and more content too. I appreciate the informative posts.
Hey Never, 🙂Originally Posted by 4/20 NEVER FORGET ↑Back when I worked on Hondas, when we would swap intake manifolds, whenever possible we would include whatever the largest stock throttle body that would fit the manifold. I think we have a similar case here, while not a huge bottle-neck, it's a bottle neck to the system, and you did make the adapter to fit the larger throttle body.
I'm sorry if I came off harsh at all in my last post, I've enjoyed this thread and your tinkering that has led you to where you are. It's a good looking manifold, and it was designed for a larger throttle body than that which you are using, and it's an easy swap to the larger 1ZZ. You have to at least try :) I think there are many others who are following the thread that are also very interested. I think with the change will come more tinkering, and more content too. I appreciate the informative posts.
No offense taken. I just got this 1ZZ 0D030 throttle body off ebay today...
Picture not included in this copy
...and will be running it soon. I read through the whole 1ZZ thread, and it looks like a real pain in the ass to get working half way decently with all the floating idles, wildly racing rpms, stripped screws, and repeated check engine lights. Hopefully, I can avoid some of the pitfalls knowing the experiences others have gone through.
I at least have some advantages over trying to make it work with the plastic stock manifold. The Corolla manifold was originally engineered for a 1.8 throttle body, and the tooter adaptor I designed will fit it perfectly. 👍
I'll let you know exactly how all this shakes out. 🙂
it looks like a real pain in the ass to get working half way decently with all the floating idles, wildly racing rpms, stripped screws, and repeated check engine lights.It's not that hard, if you have the parts you need on hand to swap the servos. The two I've seen done in person worked perfectly.
Hey Garm, 🙂
What's a servo, and how do you swap it? Is that what was being referred to as a "chip"?
There were so many different proceedures with wildly varying and inconsistent results it was truly mind bending just trying to make it through that long thread.
...and, by the way, is there anyone here who is actually running a normally aspirated 1ZZ throttle body that works properly? I'd love to hear from you how you did it. 👍
What's a servo, and how do you swap it? Is that what was being referred to as a "chip"?
There were so many different proceedures with wildly varying and inconsistent results it was truly mind bending just trying to make it through that long thread.
...and, by the way, is there anyone here who is actually running a normally aspirated 1ZZ throttle body that works properly? I'd love to hear from you how you did it. 👍
^ yeah, it's that black plastic end piece that is attached with rivets. You drill them out, and swap them so your 1NZ one is on the 1ZZ throttle body. You'll need some small screws or bolts with nuts to install.
Thanks, Garm. 🙂
I thought that might be what it was, but wasn't totally sure. I've just been reading up more about the same 1ZZ to 1NZ throttle body swap on a Scion forum so as to be totally familiar with all the issues before I actually start on the project.
I thought that might be what it was, but wasn't totally sure. I've just been reading up more about the same 1ZZ to 1NZ throttle body swap on a Scion forum so as to be totally familiar with all the issues before I actually start on the project.