Replies continued
cali yarisCanoga Park, CA · Aug 7, 2012#501or a smaller battery, which won't affect a dyno. I made space that way.
...but I want to stay away from oily filters
AFE Pro Dry S filters. 😉
tooterThread starterLos Angeles · Aug 7, 2012#502 Originally Posted by
cali yaris ↑ or a smaller battery, which won't affect a dyno. I made space that way.
AFE Pro Dry S filters. 😉
Does AFE make a 5 inch tall dry filter with a 6 inch inlet?
tooterThread starterLos Angeles · Aug 7, 2012#503 Originally Posted by
eTiMaGo ↑ Or, change that silicone coupler to a 90 degree one so you could aim the filter downward and gain a little bit of space?
Hey,
thanks TiM... 🙂
That might just be the ticket. 👍
I'll try holding the air filter vertically to check the downward clearance. If it clears, I'll simply get a 90 and resolve the whole issue. Maybe even a 45 would work.
tooterThread starterLos Angeles · Aug 7, 2012#504BINGO. 🙂
Checked the clearance, and a 45 degree silicone elbow will angle it down quick enough to fit the whole filter/velocity stack assembly just as it is. Just ordered one off ebay. $15 and a few days I'm back in business. 👍
TiM, you're a lifesaver! It's funny how other people can see such easy simple solutions because they are looking at things from a slightly different "angle". The solution is literally an angle! 😆
eTiMaGoBangkok, Thailand · Aug 7, 2012#505LOL I came to this solution because..... I had the same issue:
Picture not included in this copy
tooterThread starterLos Angeles · Aug 7, 2012#506That's the beauty of forums like this... shared experience. 🙂
I changed my order to a 90 degree coupling like yours just to make sure that it will fit. What an elegantly simple solution. Thanks, man! 👍
Bluevitz-rsOshawa, Ontario, Canada · Aug 7, 2012#507Another option would be to extend the pipe into the fender well where it would be better for pulling in cooler air not heated be the engine and rad.
tooterThread starterLos Angeles · Aug 7, 2012#508I had considered a CAI when I first got the car, except we live in an area that's subject to flooding in the Winter.
I don't want to turn the car into a wet vac. 😆
BEEFnorth carolina · Aug 7, 2012#509hydralock sucks. a buddy of mine did that to his jeep trying to be cool. ended up replacing the motor. I think he had about 10,000 miles on it.
tooterThread starterLos Angeles · Aug 7, 2012#510Yeah, I've heard enough "wet vac" stories to convince me that a CAI is not for me... especially because of where we live.
eTiMaGoBangkok, Thailand · Aug 7, 2012#511 Originally Posted by
BEEF ↑ hydralock sucks. a buddy of mine did that to his jeep trying to be cool. ended up replacing the motor. I think he had about 10,000 miles on it.
sounds all too familiar :D
ljming99Singapore · Aug 9, 2012#512 Originally Posted by
tooter ↑ Yeah, I've heard enough "wet vac" stories to convince me that a CAI is not for me... especially because of where we live.
Doesnt brands like AEM have a "bypass" for CAI, those allows for the intake to still take in air should you run into a flood 😆
Bluevitz-rsOshawa, Ontario, Canada · Aug 9, 2012#513Yes. AEM does. An you'd have to drive trough about a foot of water I order submerge the filter enough to use it.
cali yarisCanoga Park, CA · Aug 10, 2012#514The DC Sports CAI we just got in stock points the filter towards the front of the car - significantly higher than other brands.
malibuguyWestminster, MD · Aug 10, 2012#515^ pics or it didnt happen
Jeff@MicroImageSFV, CA · Aug 10, 2012#516 Originally Posted by
malibuguy ↑ ^ pics or it didnt happen
Installed on an automatic sedan, will fit both m/t & auto sedan and liftback.
1 attachment not included in this copy
1.5Tampa · Aug 10, 2012#517I have the same thought process as tooter, I live in the sunshine state which ironically is a very wet and raining area lol and I am slammed so I cant run the risk.
I am interested in either a cold air like the DC that angels up a little or maybe getting a elbow and making my own from my afe.
Jeff or Garm do you guys happen to know the clearance of the filter from the ground? I can get an idea of how high it would sit in my car?
Bluevitz-rsOshawa, Ontario, Canada · Aug 10, 2012#518Looks to be about the same height as the bumper support.
tooterThread starterLos Angeles · Aug 10, 2012#519IT'S RUNNING!!!
(yipee 🙂 )
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Just couldn't stand the suspense any longer... 😳
...so I went ahead and took off the Yaris manifold, bolted on the tooter, plugged in the hoses, and fired it up! 🙂
It starts right up, runs nice and smooth, idles nicely, no CEL (yet!😆) I can't drive it yet because there's no air filter. But I can at least rev the engine... 🙂.. and wow... does it jump off idle quick! 😲 Revving in the higher ranges from 3,000 to 4,000 feels about the same as before, but actual driving will tell the tale... and then when the ECU has learned the new conditions, it's off to the DYNO! 🙂
You can see from the pics how far to the right the inlet is pushed. They sent a 45 degree fitting instead of a 90, so I'm still waiting for the right one to arrive.
The installation is a snap. There are no clearance issues anywhere, especially with the throttle body location and attitude having been altered. All the plugs fit without stressing the wiring. I just used some scrap tubing to connect all of the devices to the tooter which also has three inlets.
Man... I AM SO EXCITED! 🙂
Soon I'll post a youtube video of it running!
YodaFL · Aug 10, 2012#520😳😳
ViperoniBrampton, ON · Aug 10, 2012#521Sweeeet, looking good so far!
Looking forward to the vids!!!
1.5Tampa · Aug 10, 2012#522Awesome job tooter. I am so impressed when people custom fab their own parts from scrap. Great work I'm excited for more updates.
CrankyOldManWest Michigan · Aug 10, 2012#523Picture not included in this copy
tooterThread starterLos Angeles · Aug 10, 2012#524I DROVE IT!!!!
(oh yeah... 🙂)
Picture not included in this copy
I tied a T shirt over the velocity stack, duct taped it tight, and took the car to town to buy gas while it's still under $4. 😆
I can hardly contain myself I'm so effing excited!Driveability is superb. You have to remember that I didn't dare go over 3,000 rpm for fear of sucking the Tshirt into the engine!
So being really conservative all I will say for right now is that the engine did not lose ANY bottom end. 🙂
edit: Oh, almost forgot...
NO CEL LIGHT!!!!
(oooh, goody... 🙂 )
tooterThread starterLos Angeles · Aug 10, 2012#525 Originally Posted by
1.5 ↑ Awesome job tooter. I am so impressed when people custom fab their own parts from scrap. Great work I'm excited for more updates.
You think
you're excited!!! 😳
I can't fully describe how personally satisfying this whole process has been to take a concept and address all of the details to produce a finished working manifold in just 2 months. I feel like a pioneer because up until now
no one has been able to come up with a normally aspirated working alternative to the stock plastic Yaris manifold.
Just from driving it to town and back... I
can't wait to put the tooter manifold on the dyno!
Picture not included in this copy packetraceQuebec · Aug 10, 2012#526I want a flange nd the tb adaptor!!! Loll
tooterThread starterLos Angeles · Aug 10, 2012#527 Originally Posted by
packetrace ↑ I want a flange nd the tb adaptor!!! Loll
The dyno runs will answer the question soon as to whether or not this project has any production value.
If the tooter manifold shows any tangible real world dyno run improvements... and that's
still a really
big if... It will be possible for
anyone to make their own tooter manifold. 🙂
1.5Tampa · Aug 10, 2012#528 Originally Posted by
tooter ↑ You think you're excited!!! 😳
I can't fully describe how personally satisfying this whole process has been to take a concept and address all of the details to produce a finished working manifold in just 2 months. I feel like a pioneer because up until now no one has been able to come up with a normally aspirated working alternative to the stock plastic Yaris manifold.
Just from driving it to town and back... I can't wait to put the tooter manifold on the dyno!
Picture not included in this copy
And then to a machine shop you can mass produce them and sell me one lol
tooterThread starterLos Angeles · Aug 10, 2012#529 Originally Posted by
1.5 ↑ And then to a machine shop you can mass produce them and sell me one lol
There'll definitely be a production run of tooters...
...
IF the dyno shows any real honest no BS gains. 🙂
AltitudeColorado · Aug 10, 2012#530Gratz! 🎉
Bluevitz-rsOshawa, Ontario, Canada · Aug 10, 2012#531Tooter, you should do a back to back run swapping manifolds if you can, when you get to the dyno.
But congratulations on getting it going!!!
malibuguyWestminster, MD · Aug 10, 2012#532Fuck yes!!!!1111oneoneone....
BEEFnorth carolina · Aug 10, 2012#533if you do make a production run, you should leave the "tooter" on it.
I can't believe you ran with a T-shirt. I will admit, I wouldn't have been able to resist myself. you have been very patient with this project and it looks awesome. regardless of what the dyno does, I think it was an awesome project. if the dyno results are positive, it will be just icing on the cake.
so have you scheduled a dyno session yet? ;)
cali yarisCanoga Park, CA · Aug 10, 2012#534very cool, congrats on producing a working aftermarket part!
tooterThread starterLos Angeles · Aug 10, 2012#535 Originally Posted by
BEEF ↑ if you do make a production run, you should leave the "tooter" on it.
Definitely... 👍
They will
all be
genuine tooters.
And if people don't like the name, it's no problem because when the manifold is installed, you
can't see the name! 😆
I can't believe you ran with a T-shirt. I will admit, I wouldn't have been able to resist myself.
I was so effing
desperate to actually
run the car. 😳
you have been very patient with this project and it looks awesome. regardless of what the dyno does, I think it was an awesome project. if the dyno results are positive, it will be just icing on the cake.
so have you scheduled a dyno session yet? ;)
No, not yet.
I've been totally swamped with work, but I'll try to find some free time to run it. The air filter issue still needs to be resolved before I can do the dyno runs.
tooterThread starterLos Angeles · Aug 11, 2012#536 Originally Posted by
Bluevitz-rs ↑ Tooter, you should do a back to back run swapping manifolds if you can, when you get to the dyno.
But congratulations on getting it going!!!
Thanks. 🙂
I won't be swapping manifolds on a hot engine. Plus, I already have the baseline dyno runs done and don't want to pay double. The upcoming tooter manifold runs will be done on the
same dyno machine.
thefallsSunny place · Aug 11, 2012#537Great work!!! Tooter the pioneer,you will be remembered everywhere now,hehe.
CrankyOldManWest Michigan · Aug 11, 2012#538 Originally Posted by
thefalls ↑ Great work!!! Tooter the pioneer,you will be remembered everywhere now,hehe.
Agreed! Too many people (myself included) start on some monumental project and get stuck somewhere before the finished product. Seeing this come to fruition really is great!
tooterThread starterLos Angeles · Aug 11, 2012#539 Originally Posted by
CrankyOldMan ↑ Agreed! Too many people (myself included) start on some monumental project and get stuck somewhere before the finished product. Seeing this come to fruition really is great!
You really helped to inspire me, Cranky. 🙂 When I saw your drawings, they brought to light the physical issues involved in having a flange machined.
What also helped was this...
Picture not included in this copy Having an actual physical template to measure off of made the project easier.👍
cali yarisCanoga Park, CA · Aug 11, 2012#540Unintended, but glad to be of service! 🙂
eTiMaGoBangkok, Thailand · Aug 11, 2012#541Was that the T-shirt you used? Now Garm can sell them as actual performance accessories :-D
tooterThread starterLos Angeles · Aug 11, 2012#542 Originally Posted by
cali yaris ↑ Unintended, but glad to be of service! 🙂
Thanks Garm. 🙂
It wasn't all we used. We also used the stock Yaris plastic manifold I bought from 90tsi to make sure everything matched up right, the flange cut off from the Corolla manifold for the port configuration on the other side, a 3 bolt Corolla throttle body gasket, as well as both stock yaris Oring gaskets. This way there was an
actual physical representation for everything that needed to be fabricated.
Driving the car yesterday confirmed what I had suspected from the beginning but had
no way of knowing for sure. That unique reverse-collector "exhaust header" plenum-less design inherently works as good or even better than the plenum "log" style manifolds. It was just a lot more expensive for the factory to design and fabricate the convoluted runners.
I was
stunned at the
superb tip-in response just as the butterfly opens off-idle when your first taking off from a stop. It's
better than the stock manifold. This really got me excited because I was the
most concerned with low rpm driveability because that's how my wife and I drive. We're more hypermiler than hotrodder. Now if the tooter is that good at the bottom, it can
only mean that performance is sacrificed somewhere else, because you
can't have everything. This is why I'm
really eager to hit the dyno just to see how much is given up, and where the compromise is made.
You know, this is going to sound silly, but it is honestly what got me going on all of this.
I thought the manifold looked absolutely
beautiful. 🙂
To me it was like a work of art. It had that really neato formula 1 racing freeflowing "bundle of snakes" tuned exhaust header look that I've always been fascinated by. I enjoy intuitively following what genuinely captures my interest just to see where it leads. It's like following a shiny slender mysterious silver thread of causality... 😉
cali yarisCanoga Park, CA · Aug 11, 2012#543 It's like following a shiny slender mysterious silver thread of causality...
Wow. They sell really strong stuff where you live. 😆
4/20 NEVER FORGETPortland, OR · Aug 11, 2012#544Congrats man, it'd been fun to watch this thread. Glad you finally have it running! I can't wait to see what the dyno says.
tooterThread starterLos Angeles · Aug 11, 2012#545 Originally Posted by
cali yaris ↑ Wow. They sell really strong stuff where you live. 😆
There's no need to do dope when life is already so full of wholesome constructive and fun pursuits. 🙂
BilliamUSA · Aug 11, 2012#546 Originally Posted by
tooter ↑ ...when life is already so full of wholesome constructive and fun pursuits. 🙂
And boobs!
Picture not included in this copy tooterThread starterLos Angeles · Aug 11, 2012#547Picture not included in this copy
YodaFL · Aug 11, 2012#548 Originally Posted by
Billiam ↑ And boobs!
Picture not included in this copy
BOOBS!
ViperoniBrampton, ON · Aug 11, 2012#549You know what I love most about boobs?
Boob.
Bluevitz-rsOshawa, Ontario, Canada · Aug 11, 2012#550Mmmmm, Booooobies