Replies continued
GolddeenohColumbia, SC · Aug 18, 2012#651!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DYNO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!
tooterThread starterLos Angeles · Aug 18, 2012#652Just got back from test running the final air filter setup and the car runs great! 🙂
I was concerned that the MAF signalling might be impaired from cutting and trimming everything on the intake so dang short, but no CEL was triggered so it's good. There is absolutely no wiggle room for that giant air filter, and I'm sure glad that those silicone couplings are flexible because it wouldn't be there if they weren't. 😉
tooterThread starterLos Angeles · Aug 18, 2012#653Just called Harry at HK Motorsports Dyno Shop in Van Nuys...
...and we're all set for dyno runs this coming Thursday morning the 23rd. 👍
cali yarisCanoga Park, CA · Aug 18, 2012#654Yay
fase4Venezuela · Aug 18, 2012#655excellent!
ViperoniBrampton, ON · Aug 19, 2012#656Time Machine - fast forward till Thursday morning :D
tooterThread starterLos Angeles · Aug 19, 2012#657 Originally Posted by
Viperoni ↑ Time Machine - fast forward till Thursday morning :D
We'll be there before you know it... 👍
I picked Thursday because it will be the coolest day of the coming week with morning clouds and a high of 87.
The peak temprature doesn't hit until about 2 to 3 in the afternoon. I'm the first run scheduled at 11:00 in the morning when it should still be slightly overcast with temps in the high 70's...
...which is similar to the conditions of the baseline dyno runs which were 78 degrees and 45% humidity. 🙂
tooterThread starterLos Angeles · Aug 19, 2012#658 Originally Posted by ryanww ↑
Very clean engine bay...Nice!👍
Thanks... 🙂 It's a little more messy right now until I get some permanent locations for the hoses all worked out...
Picture not included in this copy Picture not included in this copy tooterThread starterLos Angeles · Aug 19, 2012#659Fabricated a simple permanent mount for the radiator vent cap assembly and rerouted some of the hoses to better locations...
Picture not included in this copy
...so the area around the throttle body looks a little less cluttered.
4 days to dyno. 🙂
suckerfaceMilwaukee, WI · Aug 20, 2012#660Dude, that looks gorgeous! Great work, this has been one of the most informative/entertaining threads on this board in a while!
anomoly40Central Arkansas · Aug 20, 2012#661Picture not included in this copy
Jeff@MicroImageSFV, CA · Aug 20, 2012#662Tooter, I would recommend buying or borrowing a Scanguage before the dyno so you can monitor peak MAF readings as well as fuel trims (both long term and short term).
Bluevitz-rsOshawa, Ontario, Canada · Aug 20, 2012#663^ that's probably the best way to determine flow with either manifold on.
tooterThread starterLos Angeles · Aug 20, 2012#664 Originally Posted by
Jeff@MicroImage ↑ Tooter, I would recommend buying or borrowing a Scanguage before the dyno so you can monitor peak MAF readings as well as fuel trims (both long term and short term).
Hey Jeff, 🙂
What's a peak MAF reading, and why do I need it? And what are long term and short term fuel trims, and why do I need them? 😕
Remember, you're talking to a dummy here. 😆
Jeff@MicroImageSFV, CA · Aug 20, 2012#665tooterThread starterLos Angeles · Aug 20, 2012#666There won't be any turbulence issues with such a smooth oversized parabolic profiled entrance. Half of the Weapon R intake curve is actually inside the 90 degree fitting to smooth the transition, and the relationship of the throttle body to the MAF sensor remains unaltered.
Picture not included in this copy
That's the main reason I like the BLOX velocity stack/filter so much. None of the other intakes are quite like it. 👍
cali yarisCanoga Park, CA · Aug 20, 2012#667^ That air is passing through a sharp 90 degree bend RIGHT before the MAF. Your smooth air argument is a little weak because of that.
tooterThread starterLos Angeles · Aug 21, 2012#668 Originally Posted by
cali yaris ↑ ^ That air is passing through a sharp 90 degree bend RIGHT before the MAF. Your smooth air argument is a little weak because of that.
There's nothing to argue, Garm... 🙂
...as this is only an experiment to see what happens when I continue to follow my genuine interest while trusting my own common sense in exactly the same way it got me started in this venture. So it's totally understandable that this isn't necessarily going to make any sense going "outside the box" of conventional methods...
...but the
real fun is finding out what happens when I do.😉
This is why I'm interested in flow dynamics...
http://www.youtube.com/watch?v=Sgx4G4uli_w http://www.youtube.com/watch?v=wE34Ho2jzrM ljming99Singapore · Aug 21, 2012#669Yeah, its a tad sad that the stock air box cannot be reused exactly to make it as close as possible to a plug and play kit. That also made the air intake a custom kit.
I suggest you bundle the entire kit as the final product =)
tooterThread starterLos Angeles · Aug 21, 2012#670 Originally Posted by
ljming99 ↑ Yeah, its a tad sad that the stock air box cannot be reused exactly to make it as close as possible to a plug and play kit. That also made the air intake a custom kit.
Yeah, it's because the manifold is a completely different design from the stock one. To tell you the truth, I never even tried the stock air box because the throttle body is moved so far to the right. I'll take a closer look just to see if there is a way to mod the box to fit.
I suggest you bundle the entire kit as the final product =)
You have a good idea there... 🙂
It might be nice to at least offer that option. Malibuguy had expressed some interest in fabricating a matching intake. If he decides he doesn't want to, I'll see if I can come up with something a little easier than fitting that big BLOX air filter into such a small space. 👍
xnamerxxso cal · Aug 21, 2012#671 Originally Posted by
tooter ↑
You also have to realize that engine flow isn't static ie its not a constant suck its more of a pulse so the short inlet is likely going to introduce turbulent air into the maf and since the maf reads air moving in any direction whats going to happen is the motor "might" develop weird lean spots in certain areas of the curve. A number of aftermarket companies have run into those issues because their inlet is to close to the maf.
If you have a copy of solidworks I suggest you play around with the flow simulation tools. Here is a video of it, its a cool tool.
http://www.youtube.com/watch?v=X3ecq...eature=related cali yarisCanoga Park, CA · Aug 21, 2012#6721. Jeff provides helpful references, including information about turbulence.
2. You "argue" (what other word would you use?) that there won't be any turbulence issues.
3. I point out the 90-degree bend right before the MAF as a cause for turbulence. (Which I have some experience with).
You're right, it's not an argument -- it's a difference of opinion. 👍
tooterThread starterLos Angeles · Aug 21, 2012#673 Originally Posted by
cali yaris ↑ You're right, it's not an argument -- it's a difference of opinion. 👍
And that's what life's
all about... finding out. 😉
packetraceQuebec · Aug 21, 2012#674while finding out your learn much more then when someone tell you not to do this or that :) thats my 02 cent
cali yarisCanoga Park, CA · Aug 21, 2012#675^ Of course. It's an experiment, we're all clear about this. Not knowing what affect turbulence might have is one thing, and it's the truth -- none of of us know for sure, including me.
But stating as a fact before it's known that there won't be a problem will elicit a comment from me -- every time. Just as I'd hope you would do if I were to make such a claim.
There won't be any turbulence issues
packetraceQuebec · Aug 21, 2012#676 Originally Posted by
cali yaris ↑ ^ Of course. It's an experiment, we're all clear about this. Not knowing what affect turbulence might have is one thing, and it's the truth -- none of of us know for sure, including me.
But stating as a fact before it's known that there won't be a problem will elicit a comment from me -- every time. Just as I'd hope you would do if I were to make such a claim.
You are right...😉
anomoly40Central Arkansas · Aug 21, 2012#677Im just here for the ladies. I dont care if it makes power or not.
Bluevitz-rsOshawa, Ontario, Canada · Aug 21, 2012#678We'll all find out, win lose or draw, on Thursday.
Maybe try with the filter as is and with just the velocity stack straight on like you had it before and see if there's any difference. That should only take 30 seconds to change over.
cali yarisCanoga Park, CA · Aug 21, 2012#679@ anomoly40: 🙇
tooterThread starterLos Angeles · Aug 22, 2012#680 Originally Posted by
packetrace ↑ while finding out your learn much more then when someone tell you not to do this or that :) thats my 02 cent
You got that right, pack... I'm a find out for myself kind of guy.🙂
With little education, I rely instead on my common sense to teach me what I need to know by actual experience, and learn as I go.
I was told that I couldn't build a home on the land I bought, so I built a home on it without a mortgage.
I was told that it was impossible to get a job, so I started a business at the worst possible time, right in the middle of a bad recession over 30 years ago, and have made a decent living for decades and continue to prosper even in the midst of this recession.
I was told that the Corolla manifold would not be driveable on the Yaris at low rpms because it was too large, so I found out for myself that the engine starts right up, idles like butter, drives great at low rpms, averages 38 mpg, and has never triggered a CEL light.
People mean well when they say you can't do this, or you can't do that, because in their own experience they couldn't do it themselves. But I have found that
not everyone's experiences are the same. That's
why I'm a find out for myself kind of guy...
...because the
fun is in finding out. 🙂
tooterThread starterLos Angeles · Aug 22, 2012#681 Originally Posted by
Bluevitz-rs ↑ We'll all find out, win lose or draw, on Thursday.
It will very likely be a combination of all three...
Some winning points,
some losing points,
and some same points.
Just changing a manifold isn't magic. 😉
cali yarisCanoga Park, CA · Aug 22, 2012#682^ no, but your ability to create a 40 page thread for one is. 😆 👍 🙇
justjesusOrange County · Aug 22, 2012#683Good luck tomorrow, Tooter!
packetraceQuebec · Aug 23, 2012#684today is the day :D
eTiMaGoBangkok, Thailand · Aug 23, 2012#685*drumroll*
CrankyOldManWest Michigan · Aug 23, 2012#686Picture not included in this copy
malibuguyWestminster, MD · Aug 23, 2012#687My week has gone by much slower in anticipation for this
tk-421Dagobah · Aug 23, 2012#688Picture not included in this copy
ViperoniBrampton, ON · Aug 23, 2012#689*Twiddles Thumbs*
WeeYariGeorgetown, Ontario, Canada · Aug 23, 2012#690 Originally Posted by
Viperoni ↑ *Twiddles Thumbs*
Thumbs are gonna get tired. Sadly for us, toot lives on the west coast 🙁
mazillaSan Jacinto California · Aug 23, 2012#691...the west coast is waking up, and now we are twiddling our thumbs as well.
BEEFnorth carolina · Aug 23, 2012#692I think his dyno run is at 11 so that would be like 3 or so for us east coasters before we get results.
tooterThread starterLos Angeles · Aug 23, 2012#693Alright Kiddies... today's the day... 😉
Picture not included in this copy
cali yarisCanoga Park, CA · Aug 23, 2012#694Nice and cold this morning. 😉
Captain SlowScott, LA · Aug 23, 2012#695there aren't any available aftermarket intake manifolds for the Yaris are there?
cali yarisCanoga Park, CA · Aug 23, 2012#696^ I'd say you have about 39 pages worth of thread to read. 😉
malibuguyWestminster, MD · Aug 23, 2012#697 Originally Posted by
BEEF ↑ I think his dyno run is at 11 so that would be like 3 or so for us east coasters before we get results.
damnit...i forgot about that!!! my lunch break is now ruined
you are now on my S**T list, lol
tooterThread starterLos Angeles · Aug 23, 2012#698 Originally Posted by
cali yaris ↑ Nice and cold this morning. 😉
It's why I picked Thursday... 🙂
So that the conditions today will be as close as possible to the baseline dyno runs of 78 degrees and 45% humidity.
Captain SlowScott, LA · Aug 23, 2012#699nah I've read most of this thread. wasn't there one aftermarket manifold that was available for a short while or something like that?
BEEFnorth carolina · Aug 23, 2012#700it won't be the first s**t list I have been on. lol
I'm anxiously waiting for this one. hoping the low end and mid power band doesn't suffer.