Yarisworld Archive

Warning - Broken control arm bolt!

453 posts · 329,703 views · page 7 of 10

Replies continued

nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Nov 23, 2013#301
Originally Posted by CTScott ↑
The raised markings on the head actually indicate the grade (strength) of the bolt. The "No. 2" is just the name of the bolts relative to their position.
Oh 😳. Well, I assume all is correct re those bolts on my Yaris. When the manager saw the picture of the underside of your Yaris with the red circles you drew, he said something about that being it..that he could tell from the head of the bolt. I got the old bolts back (in my hands when I left), and driving = 👍.
CTScottUSA, CT · Dec 1, 2013#302
Originally Posted by TOLMACH ↑
Just got my bolts.. these are HUGE

Do you guys think I would be able to replace these using the ramps like below&?

http://www.canadiantire.ca/en/pdp/pr...l#.Upvx6sSxf1Y

Or shall I high jack each side separately so that there was no load on the wheel?

Thx
I think the ramps would be fine. As you start to loosen the bolt, if you notice that the A arm starts to move away from the chassis, then stop and jack it instead, but I don't think that will be the case.
CTScottUSA, CT · Dec 14, 2013#303
OK - This finally got me good. I decided to change the bolts on an 07 LB that I recently bought from someone in Ohio and I barley got the first one out without it snapping (and could not believe how bad it was). The second one snapped with barely any force applied, so I am now in the process of figuring out how to get it out.

In the meantime, here's a picture of the first one. The pile of stuff next to it came pouring out of its hole, once I removed the bolt.

Control Arm Bolt - Rusted.jpg
WeeYariGeorgetown, Ontario, Canada · Dec 14, 2013#304
OMG that is nasty. Now I'm truly scared shitless to see what they look like on my '06. She's now entering her 9th winter.
NEexpatS.E. New England · Dec 14, 2013#305
This is exactly why I haven't attempted to replace these myself ".....so I am now in the process of figuring out how to get it out."

I check mine periodically to see if the bolt heads are still there and whenever the yari is at the dealer I ask them to check them, they always say they are fine. Of course I don't know what their "inspection" involves.

Scott let us know what wizardary you employ to get that out. I would guess some drilling and a broken bolt extractor. Big extractor.

One day I may slide under there with a breaker bar and give them a crack, I won't be doing it in my garage or driveway, I'll be doing it in the big chain parking lot adjacent to the dealer so if I shear one off, I'll be about 200 yards away.
CTScottUSA, CT · Dec 14, 2013#306
Originally Posted by NEexpat ↑
This is exactly why I haven't attempted to replace these myself ".....so I am now in the process of figuring out how to get it out."

I check mine periodically to see if the bolt heads are still there and whenever the yari is at the dealer I ask them to check them, they always say they are fine. Of course I don't know what their "inspection" involves.

Scott let us know what wizardary you employ to get that out. I would guess some drilling and a broken bolt extractor. Big extractor.

One day I may slide under there with a breaker bar and give them a crack, I won't be doing it in my garage or driveway, I'll be doing it in the big chain parking lot adjacent to the dealer so if I shear one off, I'll be about 200 yards away.
Right now I am thinking that your course of action is the smart one. I sill do not have it out yet. The nut that it screws into is at the top, so drilling up from the bottom to use the bolt extractor will likely result in just snapping the bolt off half way up.

I tried dropping the subframe to give me access to the broken bolt, but that bolt jams the subframe into place, where I can not pry it off of the car. I am now working in the passenger foot well to gain access to the top of the bolt. I realized that the triangular plastic piece under the carpet is in about the correct place for the top of the bolt. Unfortunately the bolt is offset to the hole, where I can see it, but accessing it requires drilling a hole above it.

I drilled a 3/4" access hole directly above it, as I realized with another one of the bolts that a 12mm socket grips the taper of the top of the bolt. Unfortunately though the 12mm pops off when you apply serious torque, so I think my next attempt will be a bolt extractor from above.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Dec 14, 2013#307
Originally Posted by NEexpat ↑
This is exactly why I haven't attempted to replace these myself ".....so I am now in the process of figuring out how to get it out."

I check mine periodically to see if the bolt heads are still there and whenever the yari is at the dealer I ask them to check them, they always say they are fine. Of course I don't know what their "inspection" involves.

Scott let us know what wizardary you employ to get that out. I would guess some drilling and a broken bolt extractor. Big extractor.

One day I may slide under there with a breaker bar and give them a crack, I won't be doing it in my garage or driveway, I'll be doing it in the big chain parking lot adjacent to the dealer so if I shear one off, I'll be about 200 yards away.
I'm so glad I recently got new bolts and had them put in. The heads looked good, but there was rust on the threads of both of my original bolts (and my Yaris has only been exposed to fewer than 10 days of 'wimpy snow' here and not many more days re ice exposure.....and, IIRC, zero road salt exposure). We do, however, get a fair amount of rain from big storms that dump quite a bit of rain in a short period of time 😁.

The head of the bolt, at least in some cases, doesn't seem to tell the whole story. This leads me to think that the only way to thoroughly check them is to remove them.....and if you're going to do that, or have it done, they might as well be replaced with new ones.
CTScottUSA, CT · Dec 14, 2013#308
^Indeed. The heads on both of these looked fine, which is why I gave them a go.

I finally broken the sub frame free. The only thing holding it was the bond between the bolt and its metal sleeve on the A arm. A couple hours of PB Blaster, pounding, prying, torching, and bleeding and it suddenly popped free.

Tomorrow I will weld a nut onto the bolt and see if I can free it.


Control Arm Bolt - Broken.jpg
CB900F2Thread starterToronto · Dec 14, 2013#309
^^^^^^ dam!! I sure hope the tsb that what done my yaris a couple of years ago resolved this issue...
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Dec 14, 2013#310
^^^^^ Wow, that is quite a sight. Better if the break hadn't happened at all, but thank goodness it didn't happen while the 'Ohio owner' was driving the car (we all know it wouldn't happen if you decided to drive it for even a week before selling it.....would have to meet your standard first).
CTScottUSA, CT · Dec 15, 2013#311
Welding on a nut worked like a charm. The broken bolt is now out.

While searching for some info on how Toyota deals with the broken ones I ran into a case where someone had one replaced before the TSB, and they paid for 7 hours of labor (over $600) and $10 for the bolt. I can definitely understand they labor part after dealing with this myself.

Here's the big nut welded on:

Welded Nut.jpg

And, here's the broken bolt, finally freed:

Bolt Out.jpg
NEexpatS.E. New England · Dec 15, 2013#312
What a nightmare this entire issue is.

I realize the problem lies beneath the bolt head. Unfortunately I have neither the inclination nor expertise to jack or ramp up my car and take a swing at these things.

Look at what Scott just went through, I was sweating bullets when I was splicing into wires for my keyless entry for fear I would screw something up .

I just went through a front brake job where the inside of the rotors were awful. I have no doubt in my mind my bolts are corroding and for now I just have to rely on the dealership to tell me they are ok.

Months ago I thought of contacting Scott and suggesting, when he generously offered his garage and services for a get together, that I would order and buy pairs of bolts for those who would come and wanted that done, interest waned so I never did.

Imagine if it had worked out and what happened with Scott's recent bolt adventure had happened to another member. I am grateful none of it ever took place, I for one would have felt terrible about it.

I think once the originals are out and new ones are in, I would then replace them every year, fiquring the odds of them not shearing off were now in my favor, but the first ones, no thanks.
CTScottUSA, CT · Dec 15, 2013#313
^Exactly. I suspect that everyone who lives where salt is used on the roads is in exactly the same situation. Replacing them yearly truly makes sense.

After spending many hours under there I also now understand where the seam sealant needs to be applied to reduce the water entry and will post a DIY on that as well. Seam sealing will not completely eliminate the issue, but it will definitely help, as there is a pocket above the subframe that can collect water and then drip it into the bolt's sleeve.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Dec 15, 2013#314
Originally Posted by CTScott ↑
there is a pocket above the subframe that can collect water and then drip it into the bolt's sleeve.
A-ha...I imagine this might be a contributing factor as to why I had rust (given my very low exposure to snow/ice/road salt and large exposure to a lot of rain per storm).
Hersheynortheast · Dec 15, 2013#315
Toyota needs to make it mandatory . They won't because a T.S.B. saves them money . The past 5 years has diminished our faith in Toyota . Before that we were avid fans .
CTScottUSA, CT · Dec 15, 2013#316
Originally Posted by Hershey ↑
Toyota needs to make it mandatory . They won't because a T.S.B. saves them money . The past 5 years has diminished our faith in Toyota . Before that we were avid fans .
Even after going through the nightmare of replacing the broken one, I really don't blame this on Toyota as much as I do on the people who choose the Winter chemicals to use on our roads.

The difference in corrosion between the 2007 100K+ mile California Yaris that I recently parted out and this 2007 70K mile Ohio Yaris is incredible.

Recently I was chatting with a guy who works for the CT highway department and he was telling me about how bad the trucks that spray the road chemicals disintegrate in a single season, and it is just plain scary.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Dec 16, 2013#317
Originally Posted by CTScott ↑
Even after going through the nightmare of replacing the broken one, I really don't blame this on Toyota as much as I do on the people who choose the Winter chemicals to use on our roads.

The difference in corrosion between the 2007 100K+ mile California Yaris that I recently parted out and this 2007 70K mile Ohio Yaris is incredible.

Recently I was chatting with a guy who works for the CT highway department and he was telling me about how bad the trucks that spray the road chemicals disintegrate in a single season, and it is just plain scary.
Wow. I wonder what the California Department of Transportation uses for 'winter road treatment' ? Unlike CT, OH, etc., relatively few well traveled roads in densely populated areas that would need any Winter treatment. I would think the main concern would be the Interstate Highways (plus U.S. 50) where traffic has to go over a good size mountain range/pass to get to another state.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Dec 16, 2013#318
Currently on the 'story wheel' on the Yahoo home page ----- 2014 Audi R8 Convertible and a fleet of 1984 Audi 4000 Quatros having fun on 600 acres --- in the snow. I wonder what the fleet of '84s look like underneath?????


http://autos.yahoo.com/blogs/motoram...173509726.html
ViperoniBrampton, ON · Dec 16, 2013#319
I posted in one of these control arm bolt threads, soon after I got my Echo, and called out an OP on them. Now I've got my tail inbetween my legs. I've had a few bolts snap on me that should not have ever snapped - the worst two being the thermostat housing *studs*.
Basically it's horrendously cheap quality metal.

Anyone else have trouble with bolts snapping due to poor quality metal on their Yaris?

Given my experience with my Echo, and then reading this thread and the TSB's out there for the issue... is coming close to ticking the Yaris off my "next car" list...
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Dec 17, 2013#320
Originally Posted by Viperoni ↑
I posted in one of these control arm bolt threads, soon after I got my Echo, and called out an OP on them. Now I've got my tail inbetween my legs. I've had a few bolts snap on me that should not have ever snapped - the worst two being the thermostat housing *studs*.
Basically it's horrendously cheap quality metal.

Anyone else have trouble with bolts snapping due to poor quality metal on their Yaris?

Given my experience with my Echo, and then reading this thread and the TSB's out there for the issue... is coming close to ticking the Yaris off my "next car" list...
I would probably feel differently if I lived in a Winter climate like yours, but I'll probably be willing to give the Prius C a shot after (hopefully) many more miles have elapsed on my Yaris.
ViperoniBrampton, ON · Dec 17, 2013#321
Originally Posted by nookandcrannycar ↑
I would probably feel differently if I lived in a Winter climate like yours, but I'll probably be willing to give the Prius C a shot after (hopefully) many more miles have elapsed on my Yaris.
Everybody's said that, but this is the only car I've had this "weak bolts" problem with, and I've been through a few cars... and have done a ton of work on them too.

Probably the best example was with my old 92 Nissan NX2000 that I had before my Echo (which I bought in 2010), meaning the NX was 18 years old at the time, I was able to get control arms bolts, header bolts (at the motor and collector), and some others out reasonably well. No snapping, just breaker barring it out. The car had around 180k at the time and was winter driven by the previous owner.
CTScottUSA, CT · Dec 17, 2013#322
Originally Posted by Viperoni ↑
Everybody's said that, but this is the only car I've had this "weak bolts" problem with, and I've been through a few cars... and have done a ton of work on them too.

Probably the best example was with my old 92 Nissan NX2000 that I had before my Echo (which I bought in 2010), meaning the NX was 18 years old at the time, I was able to get control arms bolts, header bolts (at the motor and collector), and some others out reasonably well. No snapping, just breaker barring it out. The car had around 180k at the time and was winter driven by the previous owner.
I have seen far more bolt issues as of late as well, but not just with the Yaris. I was helping a buddy of mine change his rear shocks on his relatively new Jeep and we sheared two bolts in the process. I swear that it has nothing to do with the manufacturers cheaping out on bolts, but rather on these new road salts that are being used.
LarsGermany · Dec 17, 2013#323
Originally Posted by CTScott ↑
After spending many hours under there I also now understand where the seam sealant needs to be applied to reduce the water entry and will post a DIY on that as well.
Please do... you guys are scaring me sh*tless...

I have no idea what they put on the roads here in Germany but I sure hope it's not as aggressive as what they put on yours!!
Hersheynortheast · Dec 17, 2013#324
Never had this issue with cars of the past . Would go 250,000+ miles and no bolts for suspension would fail . Struts and other related parts , yes , that's expected . Poor design of the control arm . Who supplies those to Toyota ? Subarus and other manufacturers have the same problem .
ViperoniBrampton, ON · Jan 2, 2014#325
Originally Posted by CTScott ↑
I have seen far more bolt issues as of late as well, but not just with the Yaris. I was helping a buddy of mine change his rear shocks on his relatively new Jeep and we sheared two bolts in the process. I swear that it has nothing to do with the manufacturers cheaping out on bolts, but rather on these new road salts that are being used.
Possible... I don't have it anymore, but just before I got my Echo in 2010, my 1992 Nissan NX2000 that was winter driven in Canada, didn't have any issues removing bolts.
One bolt that was memorable was the bolt that bolted the two rear lateral links (control arms) onto the spindle. I needed to use a 2 foot breaker bar and a 4 foot pipe on an impact socket and *REALLY* needed to put my weight into it.. and I'm over 200lbs. There was at least 500ft lbs of torque going into that 1/2" bolt and it survived fine.

Referencing this thread in particular, even though these front LCA bolts aren't even getting much shear load, mainly tension they're still snapping... which really makes me think it's a metal quality issue.
And my thermostat housing stud snapping issue I just had is another example...
andulongSan Diego, CA · Jan 10, 2014#326
Finally got around to replacing my bolts today. Old ones came right out (with a long cheater bar) and still looked very good. Appeared to have only minor surface rust. I am in Southern CA and am sure that has a lot to do with the condition of the bolts. I will most likely not need to worry about this again. If I didn't have the new bolts ready to go, I would have most likely re installed the old ones. Thanks for everyone's input on this issue.
NEexpatS.E. New England · Feb 10, 2014#327
Back to this again,

Let's say, hypothetically, that there was a Yaris owner out there who was relatively certain that his/her lower control arm bolts were corroding. Based mostly on the four season climate this person lived in complete with salted winter roads.

And that this person is not at all happy with the the "reactive" attitude Toyota and subsequently their dealers are taking with this issue. Not replacing the bolts forthwith rather waiting till the customer complains of a "thunk" noise when going over a bump.

Lets say for instance that this Yaris owner wanted to be a little more "proactive" and he or she wanted to see if they could remove these bolts themselves, and if successful replace them with new bolts. Is there anything these bolts should be "dressed" with? As well as any additional sealing around the bolt hole above on the inside of the control arm.

Asking for a friend.

Cheers
CTScottUSA, CT · Feb 10, 2014#328
Originally Posted by NEexpat ↑
Back to this again,

Let's say, hypothetically, that there was a Yaris owner out there who was relatively certain that his/her lower control arm bolts were corroding. Based mostly on the four season climate this person lived in complete with salted winter roads.

And that this person is not at all happy with the the "reactive" attitude Toyota and subsequently their dealers are taking with this issue. Not replacing the bolts forthwith rather waiting till the customer complains of a "thunk" noise when going over a bump.

Lets say for instance that this Yaris owner wanted to be a little more "proactive" and he or she wanted to see if they could remove these bolts themselves, and if successful replace them with new bolts. Is there anything these bolts should be "dressed" with? As well as any additional sealing around the bolt hole above on the inside of the control arm.

Asking for a friend.

Cheers
The good thing is that if they snap while "your friend" is trying to remove them "your friend" can simply (and carefully) drive to the nearest dealership and let them perform the warranty extension service.

If "your friend" gets them out successfully "your friend" will want to seal the seams per the TSB (see the images below). I also recommend coating the bolts with something (either a heavy grease or anti-seize compound).

You can pick up caulk gun tubes of seam sealant at most auto parts stores.


Here is where the TSB shows to seal the seams
Seam Seal 3.jpg

And, here is a picture of the chassis. The red lines show the three seams to seal on each side. With the subframe in place it is very difficult to see these areas, so this picture is of a stripped chassis.
Seam Seal 4.jpg
NEexpatS.E. New England · Feb 10, 2014#329
Thanks Scott,

I be sure to ummm pass this information along.
Hersheynortheast · Mar 31, 2014#330
CT, if one or both of the bushings around the horizontal bolt (s) are bad, could it be a safety concern and still be the source of the crunch/creak with all the new parts ? Parts listed here, Suspension Cradle Maybe we should change our user name to Captain Crunch. 😁 .
CTScottUSA, CT · Mar 31, 2014#331
Originally Posted by Hershey ↑
CT, if one or both of the bushings around the horizontal bolt (s) are bad, could it be a safety concern and still be the source of the crunch/creak with all the new parts ? Parts listed here, Suspension Cradle Maybe we should change our user name to Captain Crunch. 😁 .
The horizontal ones have a simple steel tube bushing around the bolt. That tube is then surrounded with the compliant material (rubber, urethane, or whatever it is). I can't imagine them being bad on a new arm.
Hersheynortheast · Mar 31, 2014#332
No new arm(s) were installed . Still the original with 72,000+ miles . Could the surrounding material inside the steel bushing deteriorate from salt , road conditions ( pot holes , etc. ) and other reasons ?
CTScottUSA, CT · Mar 31, 2014#333
Originally Posted by Hershey ↑
No new arm(s) were installed . Still the original with 72,000+ miles . Could the surrounding material inside the steel bushing deteriorate from salt , road conditions ( pot holes , etc. ) and other reasons ?
They could potentially, but on the one where I had disintegrated vertical bolts, the horizontal ones were fine. When they dropped your subframe they would have had to remove the control arms to do so, so if they were in bad shape they should have noticed.
Hersheynortheast · Mar 31, 2014#334
Or maybe not . Never was mentioned . 🤷
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Apr 1, 2014#335
Originally Posted by Hershey ↑
Maybe we should change our user name to Captain Crunch. 😁 .
🤣 At least you are able to have a sense of humor about this. What is that old saying....If we didn't laugh, we'd cry?
brice1971Toledo Ohio · Apr 7, 2014#336
Recently had this happen as well. Battled with Toyota to cover this and lost. decided to tackle it myself.
The bolt head had completely broken off. Got it up on a lift and tried to loosen on side of the cross member enough to be able to grab it with some vise grips. This did not work.
Grabbed a punch and stuck it in the hole. Couple of smacks with the hammer and it shot up into the inside and separated the tacked on nut from the floor board.
As you might be able to see from the pictures there would've been no way to grab this and try to turn it out.
Rebolted this with nut and lock washer and on my way. Saved myself about 2 hundred bucks (this is what the local shop wanted to drop the cross member).
Had about an hour in the job and that included re-tightening everything I loosened on the first attempt.

FYI if you have had this repair done at an independent shop (non-Toyota Dealer) they will not reimburse you.
0407140939 (640x584).jpg
marcustoronto, canada · Apr 8, 2014#337
Unfortunately this is not a recall here in canada...why is that.


Sent from my iPhone using Tapatalk
CB900F2Thread starterToronto · Apr 20, 2014#338
Hi WildChild..

It’s been a while, but did your invoice note the TSB # you indicted in the previous reply was issued in 2012?



Originally Posted by WildChild ↑
The repair was done this morning, free of charge.
NEexpatS.E. New England · May 9, 2014#339
My friend decided to take a crack at changing his bolts a few days ago. He lives in the Northeast and has less than 60k on his car.

Once he got past the trepidation of ever so slowly loosening one then the other, that was it, completely uneventful.

Both expelled a couple of tablespoons of black liquid, I mean black. INK BLACK.

Once removed he was amazed..................................at the LACK of corrosion! Some rust on the threads, but nothing, zero, zippo, nada corrosion of any sort around the shaft or washer or the bolt head. No kidding. Nothing. He thought maybe just clean these up, dress them with anti seize and put them back. Went ahead with the new ones.

Someone mentioned here the hardest part of this was getting the wrench to click at 118 while lying on your back/side, no kidding! That and attempting it in the first place.

I believe he is now going to change them every 2 years, max.

Thankful that there were no issues, he understands how fortunate he was given some of the stories and experiences shared here.

Cheers.
bolts 001a.jpgbolts 005a.jpg
CTScottUSA, CT · May 9, 2014#340
Interesting. The black deposits almost look like some form of an oily residue.
NEexpatS.E. New England · May 9, 2014#341
Was odd, thought perhaps it was some kind of remnants of grease. My friend told me he had brought this whole issue up at the dealership several oil changes ago. Wonder if they maybe they took them out, greased them and put them back in?

As for the seam sealing, that is going to have to wait till he has access to a lift.
CTScottUSA, CT · May 9, 2014#342
Originally Posted by NEexpat ↑
Was odd, thought perhaps it was some kind of remnants of grease. My friend told me he had brought this whole issue up at the dealership several oil changes ago. Wonder if they maybe they took them out, greased them and put them back in?

As for the seam sealing, that is going to have to wait till he has access to a lift.
That is very possible, that they greased them.

We had enviri's Yaris up on my lift this week and I contemplated checking/changing his bolts, but he has one of the front under braces on his car and it is basically fused to its mounting bolts thanks to his car being so low. So, if one snapped we would have had a bear of a time dropping the subframe to get it out.
NEexpatS.E. New England · May 9, 2014#343
Well that's it isn't it. In a nutshell, do you risk it, or continue on with your fingers crossed.
SilverkarnUnited States · May 10, 2014#344
How do i tell if my car is included in the problem cars?

VIN #JTDJT923085205355
NEexpatS.E. New England · May 10, 2014#345
^Silver I think it is safe to say that this whole issue is a product of poor design and not poor bolts.

The shape and design of the lower control arm holds water around the bolt. Those who endure winters seem to be more susceptible to corrosion due to the caustic nature of chemicals and road salts etc. Hence the extended warranty, TSB's, including the additional seam sealing to prevent/lessen more water/moisture into that area.

I would love to say it doesn't hurt to check but this thread and others have documented quite the opposite.
SilverkarnUnited States · May 10, 2014#346
Originally Posted by NEexpat ↑
^Silver I think it is safe to say that this whole issue is a product of poor design and not poor bolts.

The shape and design of the lower control arm holds water around the bolt. Those who endure winters seem to be more susceptible to corrosion due to the caustic nature of chemicals and road salts etc. Hence the extended warranty, TSB's, including the additional seam sealing to prevent/lessen more water/moisture into that area.

I would love to say it doesn't hurt to check but this thread and others have documented quite the opposite.
Well, in that case. what luck do you suppose i would have trying to remove the bolts in my car of 54k miles and rarely driven in the winter?

The bolts APPEAR to be fine from just a cursory look, so i assume that's all that the toyota dealership would do, and with my luck i doubt that they would break before next year when the extended warranty ran out on my 08 yaris.

Maybe i could try, then if they snapped off i could just claim that the car was making the odd sound?
NEexpatS.E. New England · May 10, 2014#347
If I had to guess, and it would only be a guess, I am not a tech or mechanic. My guess would be that your bolts are probably fine, of course who knows.

A lot of people's bolt heads looked fine, the problem is hidden. If I were approaching the end of the extended warranty for the bolts and my bolts had never been replaced, I personally, not a suggestion or recommendation to anyone, I'd take a crack at them.

There are plenty of folks here who can speak to this far better than I can. I'm sure some will chime in.
jack blacksoutheast USA · May 11, 2014#348
Thanks for this useful thread. What no one mentioned in this thread, the bolts are very easy to remove for inspection if one has semi-decent tools. I did it in my driveway without lifting the car and I used a cheap breaker bar like this, without any struggle:
Picture lost · www.ultimategarage.com

My kid's Yaris was made in 2006, but spent all its life in deep south and mostly in south Florida. I didn't expect the bolts to be in bad condition, but there was some rust in the neck of the head, just next to the washer. Either water pooling there and/or galvanic corrosion due to different metal in the washer? Even though it rained a lot a week ago and before, the bolts were dry.

I packed the bolt area under the washer in grease and screwed it back. The 118 lbs/ft torque made me sweat a bit.

IMHO, since this is a simple job, everyone should at least remove the bolts for inspection/lubrication and/or replace if needed.

Yaris experts, anything else that needs to be torqued down there?
CTScottUSA, CT · May 11, 2014#349
Originally Posted by jack black ↑
Thanks for this useful thread. What no one mentioned in this thread, the bolts are very easy to remove for inspection if one has semi-decent tools. I did it in my driveway without lifting the car and I used a cheap breaker bar like this, without any struggle:
Picture lost · www.ultimategarage.com

My kid's Yaris was made in 2006, but spent all its life in deep south and mostly in south Florida. I didn't expect the bolts to be in bad condition, but there was some rust in the neck of the head, just next to the washer. Either water pooling there and/or galvanic corrosion due to different metal in the washer? Even though it rained a lot a week ago and before, the bolts were dry.

I packed the bolt area under the washer in grease and screwed it back. The 118 lbs/ft torque made me sweat a bit.

IMHO, since this is a simple job, everyone should at least remove the bolts for inspection/lubrication and/or replace if needed.

Yaris experts, anything else that needs to be torqued down there?

It is a very easy job provided they aren't rusted enough to snap. At that point in goes from a simple job with a breaker bar to an absolute nightmare. The problem is that you can't necessarily tell which way it is going to go until you give it a shot, so it is a bit of Russian roulette if you live North of the Mason-Dixon line.
jack blacksoutheast USA · May 11, 2014#350
Originally Posted by CTScott ↑
It is a very easy job provided they aren't rusted enough to snap. At that point in goes from a simple job with a breaker bar to an absolute nightmare. The problem is that you can't necessarily tell which way it is going to go until you give it a shot, so it is a bit of Russian roulette if you live North of the Mason-Dixon line.
Yes, I didn't mean to minimize the issue when the bolts break. This is why I'm trying to say one should not wait, but check the bolts as soon as possible before they break.