Replies continued
jayehBritish Columbia, Canada · Mar 1, 2013#201 Originally Posted by
Killchain ↑ Got a notice too, next oil change in about 800 mi so I'll have the dealer take a look. If they report no problems, I'm going ask for that in writing for future issues. Yet here in New Mexico other than some spot precipitation last couple of years. We are in a drought.😢
You can have as much of the 1 foot of snow that fell yesterday as you want. You just have to come pick it up.
Anyone in Canada get one of these?
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Mar 1, 2013#202 Originally Posted by
jayeh ↑ You can have as much of the 1 foot of snow that fell yesterday as you want. You just have to come pick it up
Several times, both here in Texas and in Florida, I've heard natives debating cold climate natives who are complaining about the heat. Each time the discussion has ended with the FL or TX native saying 'You don't have to shovel humidity'. Each time the cold weather native has had no answer, because there isn't one 😁.
why?harnett county NC · Mar 1, 2013#203i'll take heat every time. I worked outdoors in florida. 110 degrees in the direct sunlight. I'll take that every time over snow. And I sunburn. My nick name when i played football was 'the red lobster." that was the color of my skin after the first day of doubles, and it didn't change until well after the season ended.
DevilGirlLehigh Valley, PA · Mar 6, 2013#204Ironically enough, I received my notice 2 days ago. Unfortunately for me, they sent it to me about 1000 miles too late. I had already turned over 100k on 2/22/13.
marcustoronto, canada · Mar 6, 2013#205cost me $12.92 cnd for a pair of these bolts..
Amdkt7Nashville, TN · Mar 12, 2013#206 Originally Posted by
nookandcrannycar ↑ Several times, both here in Texas and in Florida, I've heard natives debating cold climate natives who are complaining about the heat. Each time the discussion has ended with the FL or TX native saying 'You don't have to shovel humidity'. Each time the cold weather native has had no answer, because there isn't one 😁.
That's because they know when to stop blowing hot air! 😆
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Mar 12, 2013#207 Originally Posted by
Amdkt7 ↑ That's because they know when to stop blowing hot air! 😆
LOL 👍
KillchainAlbuquerque · Mar 16, 2013#208Just got blessed by Toyota, I got a oil change completed. Yet I requested a inspection of the Lower Arm # 2 bolt. No corrosion, bolt was intact. They put that in writing on service receipt 🎉. Like I said earlier here in New Mexico we are high and dry for moisture. Yet I will always ask for the inspection of that bolt.
matthvmDartmouth Nova Scotia · Mar 25, 2013#209I had my 2008 Yaris in for an oil change and door switch recall and they discovered the bolts on mine had broke . 104,000kms on the odometer - the dealer told me it was going to be paid by Toyota
Hersheynortheast · Mar 25, 2013#210We've had door switches replaced under warranty . The other rear door is sporadic with the dome light lighting . Had it in , but it worked while in the shop . Never fails . No recall here in the States . Not that I'm aware of .
CTScottUSA, CT · Mar 25, 2013#211 Originally Posted by
Hershey ↑ We've had door switches replaced under warranty . The other rear door is sporadic with the dome light lighting . Had it in , but it worked while in the shop . Never fails . No recall here in the States . Not that I'm aware of .
The power window switches are the recall item.
Hersheynortheast · Mar 25, 2013#212Oh , looked like the door switch for the dome light . 😳
RG01Huntington Beach, Ca · Apr 7, 2013#213Hey Guys, Yaris Gal owner here. I am having THE SAME issue with the clunking and control arm crap. I have a 2007 Yaris Sedan and this started happening to me as SOON as I drove it off the lot. I took it to the dealer and they said they could not hear anything! And now, wouldn't you guess it, over 100k on my odom and will the dealer cover this? Do you happen to have any suggestions for me on how I should proceed? Is there a DIY for the fix..one for replacing the control arm and maybe one for just replacing the bolt? I would so greatly appreciate this! Thanks and I hope it all works out well for you. I pray that this nightmare ends soon. :-(
bronsinnj · Apr 7, 2013#214 Originally Posted by
nookandcrannycar ↑ Several times, both here in Texas and in Florida, I've heard natives debating cold climate natives who are complaining about the heat. Each time the discussion has ended with the FL or TX native saying 'You don't have to shovel humidity'. Each time the cold weather native has had no answer, because there isn't one 😁.
In NJ theres no earthquakes, tornadoes, tsunamies, landslides, floods, (theres plenty of water though) forest fires, and its not too hot in winter or cold in summer. 👍
I was going to say no hurricanes but after Sandy I guess I cant. 😁
Wait a minute we had no problem near Philly. No problem at all. If you live near the ocean yeah you might have had a problem. 🙁
My brother and Mom live in Houston and Moms in a nursing home. Twice they had to skeedaddle.
She said she wanted to retire someplace where its warm!
CTScottUSA, CT · Apr 7, 2013#215 Originally Posted by
RG01 ↑ Hey Guys, Yaris Gal owner here. I am having THE SAME issue with the clunking and control arm crap. I have a 2007 Yaris Sedan and this started happening to me as SOON as I drove it off the lot. I took it to the dealer and they said they could not hear anything! And now, wouldn't you guess it, over 100k on my odom and will the dealer cover this? Do you happen to have any suggestions for me on how I should proceed? Is there a DIY for the fix..one for replacing the control arm and maybe one for just replacing the bolt? I would so greatly appreciate this! Thanks and I hope it all works out well for you. I pray that this nightmare ends soon. :-(
Check out this post for info on the location of the bolts:
Warning - Broken control arm bolt! You will very easily be able to see if one is broken, as the head will be missing. If you do find that the bolt has sheared, go back to the dealer and point it out the them. DIYing repair of a sheared one would be a big job as you would have to drop the subframe to get at the broken bolt.
bronsinnj · Apr 7, 2013#216Question.
I live in NJ where we seldom have snow, and when we do, the ammount of salt they put on the road is minimal. (I grew up in upstate NY...can you say "lake effect snow"?)
Because of my physical condition Im unable to r and r these bolts. Its very inconvient to take the car to the dealer, but if necessary I will.
Has anyone had problems with these bolts who lives in an area where road salt is not an issue?
Thanks!
bronsinnj · Apr 7, 2013#217Ha just remembered I have an electric impact gun and a 19mm impact socket! 👏
With the car on ramps can you get the impact gun and socket on these bolts?
🤷
RG01Huntington Beach, Ca · Apr 7, 2013#218Yes, I live in SoCal and the bolts are a problem here, too! Let's start a petition and mail this to Toyota Corporate and tell them that we will go to the news corp. if we do not get a fix for their obvious crappy workmanship. I seriously was going to buy another yaris..then this. If they do not stand by their product, how can we?
CTScottUSA, CT · Apr 7, 2013#219 Originally Posted by
bronsin ↑ Ha just remembered I have an electric impact gun and a 19mm impact socket! 👏
With the car on ramps can you get the impact gun and socket on these bolts?
🤷
Yes
Hersheynortheast · Apr 7, 2013#220" if we do not get a fix for their obvious crappy workmanship. I seriously was going to buy another yaris..then this. If they do not stand by their product, how can we? "
+1 . 👏
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Apr 8, 2013#221 Originally Posted by
bronsin ↑ In NJ theres no earthquakes, tornadoes, tsunamies, landslides, floods, (theres plenty of water though) forest fires, and its not too hot in winter or cold in summer. 👍
I was going to say no hurricanes but after Sandy I guess I cant. 😁
Wait a minute we had no problem near Philly. No problem at all. If you live near the ocean yeah you might have had a problem. 🙁
My brother and Mom live in Houston and Moms in a nursing home. Twice they had to skeedaddle.
She said she wanted to retire someplace where its warm!
I found leaving (with a hurricane of significant strength approaching) best. I closed on my house a few weeks before Ike hit in 2008. I left Texas on Thursday just to be safe. I later looked at a pic that someone posted from a point on U.S. 59 south of Lufkin on Friday that showed bumper to bumper traffic out there in the boonies re people trying to flee the hurricane ---- 24 hours earlier I had experienced no traffic at all at the spot where that pic was taken. I awakened in my hotel room in suburban Memphis, TN the morning after Ike and the wind (hundreds of miles away from the hurricane) had lifted up all of the outdoor furniture and carried it into the pool.
bronsinnj · Apr 8, 2013#222 Originally Posted by
nookandcrannycar ↑ I found leaving (with a hurricane of significant strength approaching) best. I closed on my house a few weeks before Ike hit in 2008. I left Texas on Thursday just to be safe. I later looked at a pic that someone posted from a point on U.S. 59 south of Lufkin on Friday that showed bumper to bumper traffic out there in the boonies re people trying to flee the hurricane ---- 24 hours earlier I had experienced no traffic at all at the spot where that pic was taken. I awakened in my hotel room in suburban Memphis, TN the morning after Ike and the wind (hundreds of miles away from the hurricane) had lifted up all of the outdoor furniture and carried it into the pool.
Yes I told bro "Put Mom on a plane to NJ" if any hurricanes threaten. He didnt do that but at least got Mom in a car a few days before everyone else scrammed. They went to a friends house in Dallas for the duration.
Its a good thing because had they left when everyone else did they would have gotten on the freeway and been stuck in traffic for hours if not days. Even idleing the engine the car woould have run out of gas and there is no way to get gas stuck in miles of traffic. No gas no AC = no Mom.
That was twice and it happened a few years ago. Now she is in a nurseing home and beyond the capability of my brother to do anything for her. If there another hurricane she will have to be evaced by the staff.
If that happens....
YarisSedanCalifornia - Bay Area · Apr 8, 2013#223So i havent gone through all the posts But i am going to be taking my control arms off to change the bushings soon. Is this something I would need to worry about being i live in california so rust really isnt a issue. Might as well replace it with the updated bolt while I have it off.
StarrbriHouston · Apr 8, 2013#224Some people have mentioned water running out after removing the bolts and the rust appears to be on the threads. It seems water is entering and not draining. Is there way to seal or prevent the water for entering? If the threads on the bolt are rusted, can we also assume the control arm threads are also corroded? Will it eventually need to be replaced? I just purchased a 2007 yaris and am planning on inspecting this weekend.
CTScottUSA, CT · Apr 8, 2013#225 Originally Posted by
Starrbri ↑ Some people have mentioned water running out after removing the bolts and the rust appears to be on the threads. It seems water is entering and not draining. Is there way to seal or prevent the water for entering? If the threads on the bolt are rusted, can we also assume the control arm threads are also corroded? Will it eventually need to be replaced? I just purchased a 2007 yaris and am planning on inspecting this weekend.
If you look at the TSB, which is either posted in this thread or in the other one on this issue, Toyota does some seam sealing when performing the TSB. Theoretically that would reduce the amount of water that can enter the sleeve. Someone on this thread mentioned drilling a small hole in the sleeve near the bolt head, and that would probably help quite a bit as well.
The control arm is not threaded. The bolt passes through it up to the body. The rusting seems to be further down the bolt than the threaded area, so presumably the body threads are fine.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Apr 8, 2013#226 Originally Posted by
bronsin ↑ Yes I told bro "Put Mom on a plane to NJ" if any hurricanes threaten. He didnt do that but at least got Mom in a car a few days before everyone else scrammed. They went to a friends house in Dallas for the duration.
Its a good thing because had they left when everyone else did they would have gotten on the freeway and been stuck in traffic for hours if not days. Even idleing the engine the car woould have run out of gas and there is no way to get gas stuck in miles of traffic. No gas no AC = no Mom.
That was twice and it happened a few years ago. Now she is in a nurseing home and beyond the capability of my brother to do anything for her. If there another hurricane she will have to be evaced by the staff.
If that happens....
I (at some point before my house was finished) saw the pictures that PREVIOUSLY were attached to the Wikipedia entry for Hurricane Rita (which occurred in 2005). One of the pictures showed Interstate 45 in Southern Montgomery County with the Contraflow configuration (All lanes on both sides set to head North (away from the Gulf)). In that picture I-45 was a parking lot and cars were pulled over with hoods up. I vowed that If I was around and a storm like that was headed for Houston, that I would get a jump on getting away (and I did). I don't know why that picture was taken off the Wikipedia entry. It was up there for a couple of years at least after the storm. Perhaps someone had copyrighted the picture, became aware that it was being used, and denied use to Wikipedia.
websurferdudeWinchester, VA · Apr 8, 2013#227Can someone tell me if my VIN# JTDBT92387112623#
StarrbriHouston · Apr 9, 2013#228 Originally Posted by
websurferdude ↑ Can someone tell me if my VIN# JTDBT92387112623#
I do not believe it applies to yours as you VIN is subsequent to JTDBT923194055672
MtlmomCanada · Apr 21, 2013#229Just found your forum and a great big thanks goes out to you! My bolt has broken off and I found your forum. Thank you so much for the TSB. Though my warranty is over, I do have a service call done at 53 000 km where I was complaining about the suspension making a noise and they verified and redid the brakes (in 2011)????? Wish me luck! Couldn't have done anything without you! :o)
ittechnicianPittsburgh, PA · Apr 25, 2013#230Found this forum and its been helpful. Going to dealer Wednesday. My warranty may be over since its a 2007 Yaris close to 100,000 miles (but not over yet). The bolt on the driver side broke off.
Found a way of getting to the nut of that bolt. If you remove all the carpeting below the driver (and below the pedals) and remove the foam inserts, and remove the plastic tab (the one closer to the pedals).... you get access to that nut.
UberSilverAlameda,Ca. · Apr 25, 2013#231Good first post, Thanks!
marcustoronto, canada · Apr 25, 2013#232 Originally Posted by
ittechnician ↑ Found this forum and its been helpful. Going to dealer Wednesday. My warranty may be over since its a 2007 Yaris close to 100,000 miles (but not over yet). The bolt on the driver side broke off.
Found a way of getting to the nut of that bolt. If you remove all the carpeting below the driver (and below the pedals) and remove the foam inserts, and remove the plastic tab (the one closer to the pedals).... you get access to that nut.
screenshot would have been nice..lol
jason214Halifax NS · May 5, 2013#233I changed mine today even though the TSB is not applicable to my car.
2007 Hatchback 59000 km.
A table spoon of rust came out of each bolt hole. Both looked pretty much the same and I sandblasted the driver side bolt. Some surface corrosion and pitting corrosion. I sprayed rust inhibitor to the new bolts before I installed. The 22.5" long torque wrench was long enough so I didn't have to get under the car.
bronsinnj · May 6, 2013#234Sounds like r and r ing these bolts should be part of the 30k service procedure.
screenprintrNew Jersey · May 6, 2013#235That is some serious pitting.
MtlmomCanada · May 12, 2013#236Here is the news. After 15 loooonnnggg days of my car being off the road, they finally fixed it. I contacted the dealer on April 22nd who told me they weren't even aware of the TSB 😠. I sent it to them and after giving me the runaround all day they told me to contact Toyota Canada. I was told by TC that my file would be transferred to the review office and would take 7 to 10 business days. On the 10th day (May 6th) I sent them an email informing them that I was expecting an answer that afternoon. I received a general email telling me due to a high volume it may take longer. The following day I sent a demand letter and received a response an hour later, telling me that I needed to bring the car to the dealer for inspection. I did and they fixed it with no charge. It was a lllloooonnnngggg and hard process but I finally got what I wanted. I was told that the TSB3271 has been replaced by another TSB (which is probably to replace only the bolts rather than the whole control arm.) I will be filing a report with Transport Canada since this issue should be a recall and not only a bulletin. I would like to thank this forum, without you guys this would've never happened!!!!!
jayehBritish Columbia, Canada · May 13, 2013#237So I'm going to take my car in to my mechanic and get them to swap out the bolts.
Should anything else be done at the same time? What about the body sealer application in the TSB? If the bolt hasn't broken and the control arms don't need to be removed is it still worth it to have them apply it?
jayehBritish Columbia, Canada · May 17, 2013#238I had my bolts swapped out today. I'm glad it took it to the mechanic since one of them snapped off. They had to weld another bolt on to extract the old one.
Holy crap are they ever rusty!
auxmikeLI, New Yawk · May 17, 2013#239Holy crap! How many miles on the car then? Mine looked nowhere near that bad...
jayehBritish Columbia, Canada · May 17, 2013#240 Originally Posted by
auxmike ↑ Holy crap! How many miles on the car then? Mine looked nowhere near that bad...
41,000 miles (67,000km).
auxmikeLI, New Yawk · May 17, 2013#241That's very frightening. Imagine a person who knows nothing about this issue sees a nice lowmilage car on the used lot....RUN!
jayehBritish Columbia, Canada · May 17, 2013#242 Originally Posted by
auxmike ↑ That's very frightening. Imagine a person who knows nothing about this issue sees a nice lowmilage car on the used lot....RUN!
LIKE ME?
👎
Hersheynortheast · May 17, 2013#243😲 , those are nasty . Toyota should make it mandatory to have the bolts replaced . There's 60,000+ miles on the sedan and we have plenty of road salt and moisture . Shouldn't leave it up to the mechanic at Toyota . The sedan makes creaking and thunking noises on occasion under certain road conditions . This has been going on nearly 3 years . Been in twice , denied both times . Said no noise at time of test drive and bolts look fine . Got the T.S.B. in mail as well . 👎
jayehBritish Columbia, Canada · May 18, 2013#244 Originally Posted by
Hershey ↑ 😲 , those are nasty . Toyota should make it mandatory to have the bolts replaced . There's 60,000+ miles on the sedan and we have plenty of road salt and moisture . Shouldn't leave it up to the mechanic at Toyota . The sedan makes creaking and thunking noises on occasion under certain road conditions . This has been going on nearly 3 years . Been in twice , denied both times . Said no noise at time of test drive and bolts look fine . Got the T.S.B. in mail as well . 👎
Well, I'm offering to drop off my bolts at Transport Canada so they can analyze them!
craigqOttawa · May 18, 2013#245 Originally Posted by
jayeh ↑ I had my bolts swapped out today. I'm glad it took it to the mechanic since one of them snapped off. They had to weld another bolt on to extract the old one.
Holy crap are they ever rusty!
Our sedan is making occasional creaking noise over bumps, I visually checked and the heads of the bolts are still intact but after seeing this picture I believe I'll pick up a set and check/replace them.
EvergladeWhite Rock · May 30, 2013#246Just changed control arm bolts on my 07 hatch yesterday.
Old ones still were in pretty good condition.
Covered new ones in thick layer of
Permatex Copper Anti-Seize.
Especially between bolt head and flat washer.
Will last forever.
PS
Part number for this bolt is a bit different in Canada.
CTScottUSA, CT · May 30, 2013#247 Originally Posted by
Everglade ↑ Just changed control arm bolts on my 07 hatch yesterday.
Old ones still were in pretty good condition.
Covered new ones in thick layer of
Permatex Copper Anti-Seize.
Especially between bolt head and flat washer.
Will last forever.
PS
Part number for this bolt is a bit different in Canada.
There does not appear to be an actual difference, but Toyota lists the part numbers as:
2006-2009: 90119-14126
2010-2013: 90119-14144
suprasbMurphys CA · Jun 27, 2013#248My fiance's 07' sedan has been making this clunk for a few months now, I ordered the new bolts just in case I need them. I'll crawl under there and check them out tomorrow before work and let you know how they look! Has anyone had success drilling a small drain hole in the sub-frame? Seems like a logical fix to me.
7:34pmBritish Columbia · Jun 27, 2013#249 Originally Posted by
Everglade ↑ Just changed control arm bolts on my 07 hatch yesterday.
Old ones still were in pretty good condition.
Covered new ones in thick layer of
Permatex Copper Anti-Seize.
Especially between bolt head and flat washer.
Will last forever.
PS
Part number for this bolt is a bit different in Canada.
How much were the bolts from the dealership? I should probably do this maintenance pretty soon.
Did any of you guys check any of the other bolts?
bronsinnj · Jun 27, 2013#250 Originally Posted by
suprasb ↑ My fiance's 07' sedan has been making this clunk for a few months now, I ordered the new bolts just in case I need them. I'll crawl under there and check them out tomorrow before work and let you know how they look! Has anyone had success drilling a small drain hole in the sub-frame? Seems like a logical fix to me.
Yes Ive heard of doing that. Toyota has a proceedure to seal up the area with some goo or other.