I'm very impressed you were able to get the rack bolts out and replaced without dropping the subframe. Or did I miss that step?Originally Posted by kenora ↑well it looks like I did some house cleaning and got rid of the steering rack bolt pics but here are the LCA bolts... the passenger side shaft has eroded (rusted away) more that the other but I'm glad I'm changing them..
If some needs to see the steering rack bolts I can take another pic ... I saved the bolts to show friends the crap Toyota put in these cars..
Warning - Broken control arm bolt!
453 posts · 329,703 views · page 10 of 10
Replies continued
that is correct... the sub frame doesn't need to come out..
I needed to removed the drivers side inner tie rod and boot and then wiggle the rack out the passenger side.. it takes a bit of twist and turn and about 5 minutes but out she came...
on reinstall it goes in the same way... the inner tie rod is installed after the rack is back on..
I needed to removed the drivers side inner tie rod and boot and then wiggle the rack out the passenger side.. it takes a bit of twist and turn and about 5 minutes but out she came...
on reinstall it goes in the same way... the inner tie rod is installed after the rack is back on..
I was checking the LCA bolts on a new to me 09, I got the bolts out ok, not to rusty but rusty dust fell out. The metal sleeve of the bushing seemed way over sized for the bolt. Anyone remember this being the case?