The wiring from the inside of the steering wheel to the base of the steering column is there, so you can mount the stalk where it belongs. If you didn't get the wire to connect the stalk to the clockspring (AKA spiral cable), then you will need it. You will also need to add the wiring from the ECM to the steering column.Originally Posted by darkMINI ↑Using the toyota stalk I got from salvage yard on the column, in an '08 MT, is the wiring already in the column for the switch to connect to or would I have to mount this switch stalk elsewhere?
DIY Cruise Control on 07-08 Yaris (step by step)
415 posts · 355,617 views · page 6 of 9
Replies continued
Ok, thanks CTScott, is there a picture somewhere of this "spiral cable" you speak of? My stalk has a red and white wire coming out of it that end at a plastic connector that also has a short white wire with a female spade connector, but its not spiralled.
When I raped the poor Corolla of its cruise stalk I didn't see a spiral cable in the steering wheel.
When I raped the poor Corolla of its cruise stalk I didn't see a spiral cable in the steering wheel.
The "spiral cable" or clockspring is the round plastic assembly that allows the steering wheel to turn without ripping out the airbag, horn, and cruise wires. When you pull the airbag, the connector where the cruise stalk (and horn) connects to is at the top. Here's a picture of mine with my cruise stalk installed:Originally Posted by darkMINI ↑Ok, thanks CTScott, is there a picture somewhere of this "spiral cable" you speak of? My stalk has a red and white wire coming out of it that end at a plastic connector that also has a short white wire with a female spade connector, but its not spiralled.
When I raped the poor Corolla of its cruise stalk I didn't see a spiral cable in the steering wheel.

If your Corolla connector is different than the Yaris one, then you will need to move the pins from the Corolla on to the existing cruise/horn connector.
Ok, thanks for the great picture. So I may or may not have the correct connector for the clockspring. Guess I won't know until I open the steering wheel. Keeping my fingers crossed!
Look at the connector on your Corolla harness. If it is a 4 pin connector, like the white one in my photo, then you are OK. If it is larger than that, then you will have to move the pins over.Originally Posted by darkMINI ↑Ok, thanks for the great picture. So I may or may not have the correct connector for the clockspring. Guess I won't know until I open the steering wheel. Keeping my fingers crossed!
CScott and all 2008 CND Sedan owners.. I have read most of the threads on the CC and since most are about the US version of Yaris, I just want to confirm for the CND version.
I am wanting to install the OEM steering wheel CC control stalk, I do not need any additional running of wiring from the small 4 pin connector in the steering wheel other then from the CC stalk to the connector..
Sorry guys if this is a repeat question..
regards
I am wanting to install the OEM steering wheel CC control stalk, I do not need any additional running of wiring from the small 4 pin connector in the steering wheel other then from the CC stalk to the connector..
Sorry guys if this is a repeat question..
regards
On your 08 sedan, I am pretty sure that you will need to run the wire from the other end of the clockspring to the ECM, as all 08 liftbacks require that wire to be run.Originally Posted by CB900F2 ↑CScott and all 2008 CND Sedan owners.. I have read most of the threads on the CC and since most are about the US version of Yaris, I just want to confirm for the CND version.
I am wanting to install the OEM steering wheel CC control stalk, I do not need any additional running of wiring from the small 4 pin connector in the steering wheel other then from the CC stalk to the connector..
Sorry guys if this is a repeat question..
regards
Wired it up last Friday on my '07 liftback and I have been cruising ever since! Thank you SO MUCH!! I used the remote start pannel and placed 4 push buttons from fry's electronics. They look really sleek, the color matches perfectly. They are very stiff and springy (as opposed to clicky), so its very pleasant to use for speeding up and slowing down.
I suffer from some stupid leg problems and if I cannot bend my leg for long periods of time I get terrible shooting pains along the nerves. Now I can drive long distances without wanting to cry. Thank you thank you!
Jasper
I suffer from some stupid leg problems and if I cannot bend my leg for long periods of time I get terrible shooting pains along the nerves. Now I can drive long distances without wanting to cry. Thank you thank you!
Jasper
Glad it worked for you Jasper.Originally Posted by Nebarnix ↑Wired it up last Friday on my '07 liftback and I have been cruising ever since! Thank you SO MUCH!! I used the remote start pannel and placed 4 push buttons from fry's electronics. They look really sleek, the color matches perfectly. They are very stiff and springy (as opposed to clicky), so its very pleasant to use for speeding up and slowing down.
I suffer from some stupid leg problems and if I cannot bend my leg for long periods of time I get terrible shooting pains along the nerves. Now I can drive long distances without wanting to cry. Thank you thank you!
Jasper
How about sending a pic or two of your switches? And a part number from Fry's?
Hi Scott and all.. For the lift of me, I can not identify the D3 connector as in the DIY document to confirm if I have CC pre wired for the sedan.. Should it be visiable from under the dash area with out having to remove any covers?
thanks all!
thanks all!
Originally Posted by CTScott ↑On your 08 sedan, I am pretty sure that you will need to run the wire from the other end of the clockspring to the ECM, as all 08 liftbacks require that wire to be run.
It's on the steering column, and requires removing the lower column cover to see it. Just remove the screw by the steering wheel tilt lever and the two that become visible when you turn the steering wheel.Originally Posted by CB900F2 ↑Hi Scott and all.. For the lift of me, I can not identify the D3 connector as in the DIY document to confirm if I have CC pre wired for the sedan.. Should it be visiable from under the dash area with out having to remove any covers?
thanks all!
The UPS man has left me a notice of delivery, but I wasn't home Friday. 🙁
Tuesday can't come quick enough! 😁
Tuesday can't come quick enough! 😁
Good news for CND 2008 Sedan owners.. The wiring is there to the ECN. 👍 I will assume all the wiring in the steering wheel is also present..
Not sure about the US version of 2008 Sedan and if the wiring to the ECN is there..
Here is a photo I took of the ECN connector..

Not sure about the US version of 2008 Sedan and if the wiring to the ECN is there..
Here is a photo I took of the ECN connector..
Originally Posted by CTScott ↑On your 08 sedan, I am pretty sure that you will need to run the wire from the other end of the clockspring to the ECM, as all 08 liftbacks require that wire to be run.

I have that blue wire but the one connecting that blue wire to D3 is absent. So you should take off the three screws holding the bottom of the column cover on to check. It doesn't even take 5 minutes.
Hi Yarisduder.. Well... you are right!... pulled off the cover and the CC wires are not there!.. GOD DAM!!!.. 😢
Originally Posted by Yarisduder ↑I have that blue wire but the one connecting that blue wire to D3 is absent. So you should take off the three screws holding the bottom of the column cover on to check. It doesn't even take 5 minutes.
Before I make any modifications, can anyone confirm if I in fact have the CC wires. I've been looking at my wires for a while and the DYI guide, and it's hard for me to tell if I do or don't.
Picture lost · www.thecnz.com
Picture lost · www.thecnz.com
You do not. See the white connector with the one black wire - That would have a brown and blue as well if you did.Originally Posted by Bluffnaked ↑Before I make any modifications, can anyone confirm if I in fact have the CC wires. I've been looking at my wires for a while and the DYI guide, and it's hard for me to tell if I do or don't.
Picture lost · www.thecnz.com
Thank you CT, I didn't even notice that one until you pointed it out lol.
And success, installed and working like a charm. Thx to CT for the indication box, and the PDF. Although I think the DIY PDF reads wrong about the location of A21.
"4. Run the positive wire (red wire on last page pictures) to pin 40 of ECM connector A21. This connector is the one on the right plugged into the ECM (left side of the engine bay if you are standing in front of the car). You must first cut the ziptie, push the clips (I used a small screwdriver) and undo the hooks to remove the cover as shown by nickhjort in the following picture. Then you push the little rubber that is in the pin40 out with a pin and get your wire through. I suggest that you skin the wire on 1-2 cm, twist it and then cut it as close as possible to the connector after you pulled
it from the other side."
On my car A21 is the right side of the ecm when I'm standing in front of the car, it's the smaller one of the two. When you read the above paragraph from the DYI PDF, it starts to say right side, then goes to say "left side of engine bay if you are standing in front of the car". This threw me off, so I wrestled with the other connection which is a lot harder to get off for a while, till I realized I had the wrong one. LOL anyway just wanted to point that out. And of course I do appreciate the DYI, because I was close to having the dealer install it for me for the tune of $500 big ones.
And success, installed and working like a charm. Thx to CT for the indication box, and the PDF. Although I think the DIY PDF reads wrong about the location of A21.
"4. Run the positive wire (red wire on last page pictures) to pin 40 of ECM connector A21. This connector is the one on the right plugged into the ECM (left side of the engine bay if you are standing in front of the car). You must first cut the ziptie, push the clips (I used a small screwdriver) and undo the hooks to remove the cover as shown by nickhjort in the following picture. Then you push the little rubber that is in the pin40 out with a pin and get your wire through. I suggest that you skin the wire on 1-2 cm, twist it and then cut it as close as possible to the connector after you pulled
it from the other side."
On my car A21 is the right side of the ecm when I'm standing in front of the car, it's the smaller one of the two. When you read the above paragraph from the DYI PDF, it starts to say right side, then goes to say "left side of engine bay if you are standing in front of the car". This threw me off, so I wrestled with the other connection which is a lot harder to get off for a while, till I realized I had the wrong one. LOL anyway just wanted to point that out. And of course I do appreciate the DYI, because I was close to having the dealer install it for me for the tune of $500 big ones.
I just finished a 1000 mile trip with the 2 button cruise control and I liked it so much that I upgraded to a variation on the 4 button version. While on the road I picked up a MOMENTARY-OFF-MOMENTARY toggle switch (at HSC Electronics in California, $1.49). I now have Up=RES/+ and Down=SET/- on the switch, a low profile Microswitch push button for On/Off and a C&K white pushbutton for Cancel.
By using 3 differently shaped controls, I can feel the difference, so I don't need to be able to see them. I had the push buttons in my stash.
The toggle switch is similar to this: http://search.digikey.com/scripts/Dk...name=EG2388-ND
Note also this is a 2010 Yaris automatic, stripped down (no power package), and it had the cruise control wiring in place.
By using 3 differently shaped controls, I can feel the difference, so I don't need to be able to see them. I had the push buttons in my stash.
The toggle switch is similar to this: http://search.digikey.com/scripts/Dk...name=EG2388-ND
Note also this is a 2010 Yaris automatic, stripped down (no power package), and it had the cruise control wiring in place.

i have one question here.
My yaris D3 connector has one cable (black). When i remove this connector, the horn stops working. is it the horn connector ? what kind of power does this cable provide. Negative or positive ? also the pin 40 on the ECM doesnt contain any sort of power when i check it with a power meter. Is it supposed to have any pulse or something? i am just a little worried to not damage the ECM by doing this sort of a setup. Is it safe ?? 100% ?? :p
My yaris D3 connector has one cable (black). When i remove this connector, the horn stops working. is it the horn connector ? what kind of power does this cable provide. Negative or positive ? also the pin 40 on the ECM doesnt contain any sort of power when i check it with a power meter. Is it supposed to have any pulse or something? i am just a little worried to not damage the ECM by doing this sort of a setup. Is it safe ?? 100% ?? :p
Scott... It appears for my 08 CND Sedan, the wire run from the ECU to AD4 is there, and what is missing is the wire run from AD4 to D3..
Since AD4 is tucked way in the top left side of the inner dash, not sure if you have ever taken apart your Yaris's top dash, and if you have noticed if both ends of AD4 have the light blue wire.. I am really hoping Toyota has the wire run from AD4 to D3, but only decided to tuck away the run from AD4 to D3 some where.
I would find it odd that all of the other wiring is there as even the clutch switch is there, but they manufactured the wire harness with only missing the run from AD4 to D3
What do you think?
Since AD4 is tucked way in the top left side of the inner dash, not sure if you have ever taken apart your Yaris's top dash, and if you have noticed if both ends of AD4 have the light blue wire.. I am really hoping Toyota has the wire run from AD4 to D3, but only decided to tuck away the run from AD4 to D3 some where.
I would find it odd that all of the other wiring is there as even the clutch switch is there, but they manufactured the wire harness with only missing the run from AD4 to D3
What do you think?
I don't believe that Yaris for your area have the cruise functionality. Besides that, the black wire is the horn. There are two additional wires that get added to D3 for cruise control.Originally Posted by sheraz2000 ↑i have one question here.
My yaris D3 connector has one cable (black). When i remove this connector, the horn stops working. is it the horn connector ? what kind of power does this cable provide. Negative or positive ? also the pin 40 on the ECM doesnt contain any sort of power when i check it with a power meter. Is it supposed to have any pulse or something? i am just a little worried to not damage the ECM by doing this sort of a setup. Is it safe ?? 100% ?? :p
Check out this thread for more info:
DIY Cruise Control FAQ (2006-2010 Yaris)
Originally Posted by CB900F2 ↑Scott... It appears for my 08 CND Sedan, the wire run from the ECU to AD4 is there, and what is missing is the wire run from AD4 to D3..
Since AD4 is tucked way in the top left side of the inner dash, not sure if you have ever taken apart your Yaris's top dash, and if you have noticed if both ends of AD4 have the light blue wire.. I am really hoping Toyota has the wire run from AD4 to D3, but only decided to tuck away the run from AD4 to D3 some where.
I would find it odd that all of the other wiring is there as even the clutch switch is there, but they manufactured the wire harness with only missing the run from AD4 to D3
What do you think?
Getting to AD4 requires removing the top of the dash. The wire from AD4 to D3 is definitely not tucked, as it would be part of the harness that also contains the horn wire.
In my area YARIS is not available, so i had to buy it from JAPAN. Does it work with JAPANESE models ??Originally Posted by CTScott ↑I don't believe that Yaris for your area have the cruise functionality. Besides that, the black wire is the horn. There are two additional wires that get added to D3 for cruise control.
Check out this thread for more info:
DIY Cruise Control FAQ (2006-2010 Yaris)
also i have got a Yaris sedan (BELTA in japan) . got 3 wires in D3 connector. Got it also from JAPAN. can i do the CC with both these cars ??
If the Belta has blue and brown as the other two wires in D3, then it should work. If it has the cruise control indicator in the cluster, then to test it just jump the blue to the brown with the ignition on and the CC indicator should light.Originally Posted by sheraz2000 ↑also i have got a Yaris sedan (BELTA in japan) . got 3 wires in D3 connector. Got it also from JAPAN. can i do the CC with both these cars ??
For the other, which just has the black wire, the best quick test is to measure the voltage on the ECM pin (A21-Pin 40) with the ignition on. If CC is active on the ECM, then that pin will have 12V on it.
Hello!
I have a question, I hope you all don't mind....
I have an 08 liftback, MT, without wiring. I've installed the buttons and the wiring to ground and ECM. I don't have a harness for the clutch switch, so I need to rig the switch to go into the fuse box in the engine bay. (If this is wrong please correct me)
The clutch switch has two contacts, so I assume I run two wires off of those contacts into the fuse box. My question is which wire goes where? Looking at the picture on the top of the 4th page of the pdf, I'm not entirely sure.
I have a question, I hope you all don't mind....
I have an 08 liftback, MT, without wiring. I've installed the buttons and the wiring to ground and ECM. I don't have a harness for the clutch switch, so I need to rig the switch to go into the fuse box in the engine bay. (If this is wrong please correct me)
The clutch switch has two contacts, so I assume I run two wires off of those contacts into the fuse box. My question is which wire goes where? Looking at the picture on the top of the 4th page of the pdf, I'm not entirely sure.
Would this work on a 2009 Sedan?
Got my cruise stuff, now I'm just waiting for a day off to go get it installed. 🙁
Yes:Originally Posted by r0chin ↑Would this work on a 2009 Sedan?
DIY Cruise Control FAQ (2006-2010 Yaris)
Originally Posted by Daren ↑Hello!
I have a question, I hope you all don't mind....
I have an 08 liftback, MT, without wiring. I've installed the buttons and the wiring to ground and ECM. I don't have a harness for the clutch switch, so I need to rig the switch to go into the fuse box in the engine bay. (If this is wrong please correct me)
The clutch switch has two contacts, so I assume I run two wires off of those contacts into the fuse box. My question is which wire goes where? Looking at the picture on the top of the 4th page of the pdf, I'm not entirely sure.
Correct on the clutch switch wiring. The clutch switch goes to the blue wire indicated below and the white wire, to pins to the right of the blue.
Attached picture not available
Thanks for the response! Checking to make sure I understand:Originally Posted by CTScott ↑The clutch switch goes to the blue wire indicated below and the white wire, to pins to the right of the blue.
So both wires from the clutch switch splice into the blue wire and the white wire is moved to the right of the blue?
No, one wire from the clutch switch connects to the blue and the other connects to the white.Originally Posted by Daren ↑Thanks for the response! Checking to make sure I understand:
So both wires from the clutch switch splice into the blue wire and the white wire is moved to the right of the blue?
Thank you so much.
Cruise control works great! A big thanks to everyone who contributed!
Originally Posted by geniusmiki ↑Hi, i'm writing from italy.
I'm happy to found a forum like this, nothing of similar in my nation.
I really need a Cruis Control on my Yaris 1.4 D4D 2007
i have made some photos of my cables situation.
can someone help me to understand what i have to do now?
Picture lost · img825.imageshack.us
and i have alredy the clutch switch:
Picture lost · img836.imageshack.us
Uploaded with ImageShack.us
thanks for reply.
For the European Yaris, you need to use an aftermarket cruise control, since the European ECM doesn't seem to have the function built in.
Check out the link below. This Belgium based company makes an aftermarket CC for European Toyotas:
http://www.el-pas.com/products.htm
I don't know why they have different programs for the ECMs for the different markets. I would think that people all over the world would appreciate cruise control.Originally Posted by geniusmiki ↑thanks for quick reply, if you are right, toyota has made 2 differenct ECM only for Cruise function?? very strange. i'm studing toyota thought, and in my car i have all predisposition for all optionals. This thing means that toyota don't make too many productive lines for different cables, why they should do this for ECM?
well, when i opened up the D3 connector on my belta, i got these wires. Tell me what to do from here forward. SORRY about the blurry pic, was taken from my mobile cam. But the wire colors r pink, orange, grey and black. there is no blue and brown cable. How to check if my car has CC in ECM.Originally Posted by CTScott ↑If the Belta has blue and brown as the other two wires in D3, then it should work. If it has the cruise control indicator in the cluster, then to test it just jump the blue to the brown with the ignition on and the CC indicator should light.
For the other, which just has the black wire, the best quick test is to measure the voltage on the ECM pin (A21-Pin 40) with the ignition on. If CC is active on the ECM, then that pin will have 12V on it.

Those three wires are for the steering wheel audio controls. If a Yaris is wired for them, then it definitely does not have Cruise Control. Based on the wiring diagrams, areas that have steering wheel radio controls do not have cruise control and areas that have cruise control do not have steering wheel radio controls.Originally Posted by sheraz2000 ↑well, when i opened up the D3 connector on my belta, i got these wires. Tell me what to do from here forward. SORRY about the blurry pic, was taken from my mobile cam. But the wire colors r pink, orange, grey and black. there is no blue and brown cable. How to check if my car has CC in ECM.
but, my steering wheel doesnt have any radio controls. can i do the CC still, using the pin 40 method and using the black wire ?? (while ignoring the rest of the cables) ???Originally Posted by CTScott ↑Those three wires are for the steering wheel audio controls. If a Yaris is wired for them, then it definitely does not have Cruise Control. Based on the wiring diagrams, areas that have steering wheel radio controls do not have cruise control and areas that have cruise control do not have steering wheel radio controls.
No. Even though your car doesn't have the controls, ones for your area are wired for it, which means that the ECM does not support cruise control.Originally Posted by sheraz2000 ↑but, my steering wheel doesnt have any radio controls. can i do the CC still, using the pin 40 method and using the black wire ?? (while ignoring the rest of the cables) ???
so, the final and the last test would be to check pin 40 for 12V current. if on ignition it gives out a current, then do i have CC? ??Originally Posted by CTScott ↑No. Even though your car doesn't have the controls, ones for your area are wired for it, which means that the ECM does not support cruise control.
I wouldn't put the effort into checking, as based on how your Yaris is wired, I am 90% certain that your ECM doesn't have cruise control.Originally Posted by sheraz2000 ↑so, the final and the last test would be to check pin 40 for 12V current. if on ignition it gives out a current, then do i have CC? ??
so if I understand this correctly I cannot do this cheap cruise control on european yaris ?
I have also the clutch switch installed from the factory since I have the start&stop system which uses that switch
have actually somebody from europe installed this cruise control ? what do you need to know to say that it cannot be done ?
thanks
I have also the clutch switch installed from the factory since I have the start&stop system which uses that switch
have actually somebody from europe installed this cruise control ? what do you need to know to say that it cannot be done ?
thanks
That is correct - It will not work on a European one. The European service manual and EWDs have no documentation on cruise control. Your only option is an aftermarket cruise control system.Originally Posted by henry33 ↑so if I understand this correctly I cannot do this cheap cruise control on european yaris ?
I have also the clutch switch installed from the factory since I have the start&stop system which uses that switch
have actually somebody from europe installed this cruise control ? what do you need to know to say that it cannot be done ?
thanks
yes but it won't cost 10$ and now it will look too general :( this was more like you actually understand the electronics etc so you can show it to the friends and be proud on what you have done (with help of YW ) 👍Originally Posted by CTScott ↑That is correct - It will not work on a European one. The European service manual and EWDs have no documentation on cruise control. Your only option is an aftermarket cruise control system.
Picture lost · img33.imageshack.us
Uploaded with ImageShack.us
this is mine !! Thanks a lot !!! I really enjoy this !!! I don't regret to have bought a base yaris since i have Cruise controll 🎉😁
Uploaded with ImageShack.us
this is mine !! Thanks a lot !!! I really enjoy this !!! I don't regret to have bought a base yaris since i have Cruise controll 🎉😁
Hey all I haven't been keeping up on this post, or others for that matter :) I was without a computer for a while and am just now getting set back up. Anyway I'm glad to see that so many people are interested, or have already done their own Cruise Control. I am just here to say that I am one of the first to set mine up in this manner and it's been a little over a year. My cruise has been a life saver (foot saver rather) and i barely spent over 15 dollars (that's on the first setup with all parts sitting in my junk part piles) and now have updated it with a few OEM parts (clutch switch, ECU pin insert, etc) Also for those of you that want to have an even closer OEM look, I strongly recommend CTScott's LED module (if he's still selling them) for making your CC light an LED when it's switched on. I mounted my LED inside the gauge cluster and it looks bad ass :) Anyway I just wanted to let everyone know all is well with this setup and keep sticking it to the man HAHA!!






Hi everyone,
I'm so interested in this topic. But my car is Yaris Hatchback 1.3l AT 2008 (Middle East version) so Can I install CC on my Yaris???
Thank you in advance!l
P/s: Sorry, my english is not so good.
I'm so interested in this topic. But my car is Yaris Hatchback 1.3l AT 2008 (Middle East version) so Can I install CC on my Yaris???
Thank you in advance!l
P/s: Sorry, my english is not so good.
No - Only the US version has cruise control.Originally Posted by slazenger ↑Hi everyone,
I'm so interested in this topic. But my car is Yaris Hatchback 1.3l AT 2008 (Middle East version) so Can I install CC on my Yaris???
Thank you in advance!l
P/s: Sorry, my english is not so good.