Yarisworld Archive

Can we do this? (aka The DIY Cruise Control Thread)

498 posts · 380,332 views · page 4 of 10

Replies continued

CTScottUSA, CT · Apr 28, 2009#151
I received my switches and buttoned mine up today. I decided to stick with two switches (on/off and Set), as I never bother with resume or +/-. I mounted the switches where the engine start button would go.

kenkydUSA · Apr 28, 2009#152
Originally Posted by PK198105 ↑
1. take the steering column cover off and look for a connector called D3 , its the white one closest to you when you take off the cover. See if the connector has a blue wire coming out of it. if it does than all you need to do is connect the oem switch to the spiral cable and your are done.

2. if you dont have that blue wire you will need to take the dash apart to get to AD4 junction box, and that is another story. when i have some free time ill try to take some pics of the process.
can we figure out what year/options/model will determine these 2?
AlexNet0Rockland, ME · Apr 28, 2009#153
Originally Posted by PK198105 ↑
well i know for a fact the 2007 doesn't have the wires at D3 and you need to take the dash apart, same for the 08. 09s apperantly have them

Oh great lol
kenkydUSA · Apr 28, 2009#154
Originally Posted by AlexNet0 ↑
Oh great lol
x2
enobmort42Denver, CO · Apr 28, 2009#155
CTScott, that's awesome. I expect a full write-up with pictures on my desk by tomorrow morning. lol jk 😛

just a question, but must there be two buttons, or is it possible for there be a rocker switch, similar to the factory power window buttons?
CTScottUSA, CT · Apr 28, 2009#156
Originally Posted by enobmort42 ↑
CTScott, that's awesome. I expect a full write-up with pictures on my desk by tomorrow morning. lol jk 😛

just a question, but must there be two buttons, or is it possible for there be a rocker switch, similar to the factory power window buttons?
Hey, I'm just waiting for PK's writeup on running that dang wire on your antiques.

I actually bought four different types of switches, including two 4-way joystick type ones that turned out to be too small, as they are really intended to be used on mobile phones. one momentary-off-momentary rocker switch could be used in place of my two switches, or two could be used to provide all four functions.
AlexNet0Rockland, ME · Apr 28, 2009#157
Has everyone else already recieves their stalk switches?
mrbondThread starterIllinois · Apr 28, 2009#158
Nope. Still waiting impatiently.
MGarganoNJ · Apr 28, 2009#159
Originally Posted by mrbond ↑
Nope. Still waiting impatiently.
Ditto. Should be any day now I hope. I have an '09 so hopefully the install should be simple.
ShroomsterOrlando · Apr 29, 2009#160
CTSscott, is your setup able to be cancelled by pressing the brake? and can you over-ride the set speed with acceleration to a new speed and then pressing set again?
CTScottUSA, CT · Apr 29, 2009#161
Originally Posted by Shroomster ↑
CTSscott, is your setup able to be cancelled by pressing the brake? and can you over-ride the set speed with acceleration to a new speed and then pressing set again?
Yes - Brake (or on/off button) cancels it and I can accelerate and hit set again to lock in a new speed.
enobmort42Denver, CO · Apr 29, 2009#162
very nice! given my expertise with cars, this will be a fun summer project! lol
AlexNet0Rockland, ME · Apr 29, 2009#163
it wont be an issue as long as I can find the pin under the dash with help from PK's writeup or instructions/pics, whatever, lol
33OHDover, Ohio · Apr 30, 2009#165
Hurry up PK! 😁
Pitt YarisPittsburgh · Apr 30, 2009#166
Very cool, I'm thinking of mounting the switch where my auto mirror adjustment would be to the left of the steering wheel
CTScottUSA, CT · May 1, 2009#167
I just added a note on my DIY in regards to cars with MT. TDB-1 PM'd me tonight. He attempted the two button method on his 09, and the on/off worked, but not the set. He inquired if there was anything different about a MT, and it turns out that the MT requires a second switch on the clutch for cruise.

The "Cruise Control Clutch Switch" is needed as well. This is a second clutch switch (there's already one called the "Clutch Start Switch"). The "Cruise Control Clutch Switch" connects to connector A29. Its part number is: 88280-14030 and it lists for ~$18.
CTScottUSA, CT · May 1, 2009#168
Originally Posted by PK198105 ↑
ahhh so its not the same as the clutch switch for the ignition inhibit
Seems pretty silly, except the start one detects fully pressed and the cruise on detects the initial press of the pedal.
MGarganoNJ · May 2, 2009#169
Originally Posted by CTScott ↑
I just added a note on my DIY in regards to cars with MT. TDB-1 PM'd me tonight. He attempted the two button method on his 09, and the on/off worked, but not the set. He inquired if there was anything different about a MT, and it turns out that the MT requires a second switch on the clutch for cruise.

The "Cruise Control Clutch Switch" is needed as well. This is a second clutch switch (there's already one called the "Clutch Start Switch"). The "Cruise Control Clutch Switch" connects to connector A29. Its part number is: 88280-14030 and it lists for ~$18.
Is the 'Cruise Control Clutch Switch' only needed if using your two button method on a MT? Will I still need it if I'm using the OEM stalk?
CtrlAltDefeatIndianapolis IN · May 2, 2009#170
Damn damn damn! I have an 08 MT. That's 2 strikes. My dream of $20 OEM CC is fading fast... 🙁
CTScottUSA, CT · May 2, 2009#171
Originally Posted by MGargano ↑
Is the 'Cruise Control Clutch Switch' only needed if using your two button method on a MT? Will I still need it if I'm using the OEM stalk?

Yes, the clutch switch is just for MT, and it is still needed with the OEM stalk. It keeps the car from over revving if you press the clutch while in cruise mode.
nickhjortOneida, NY · May 2, 2009#172
There's no way of rigging your own MT Clutch Switch for doing this DIY? Not that 18 bucks is that bad, but if you didn't want to wait around for the thing to show and could possibly use some stuff you have laying around in your electronics drawer?
TDB-1pa · May 2, 2009#173
Ok I just finished up my 2 button cruise setup on my 09 3 door 5speed. I did everything as per the DIY and it works great!!!! I had to jump the clutch switch for the test until I get the correct switch. This works just don't step on the clutch while on cruise or the engine could over rev. I got my switches at Radio Shack for $2.69 each and they look identical to the ones in the DIY. I used 2- 330 ohm resisters also from Radio Shack that cost $.99 for a 5 pack. This is the best thing I did to the car since I got it. THANKS to all who figured this was possible
nickhjortOneida, NY · May 2, 2009#174
Also I searched quick and I couldn't find anything on removing the dash for the 07 liftback 3dr. Does anyone know where I might find a quick reference guide?
nickhjortOneida, NY · May 2, 2009#175
Found it...nevermind :) Also they got my Clutch switch at the nearby dealer for 19 bucks. So I'll just splurge and pick me up one of those later this week. But I'll jump it for now, just so I can test it :)
nickhjortOneida, NY · May 2, 2009#176
Yup that's where I found it. Thanks :)
nickhjortOneida, NY · May 2, 2009#177
PK198105 or CTScott, or anybody for that matter :)
PK198105 mentioned if you didn't have blue wires under the sterring wheel, then you'd have to find the AD4 junction box. Well my car is ripped apart (see picture) and I need help finding the right box and which wires to splice into for this cruise control. I set my switches up just like CTScott has them and now I just need to splice wires. Please help me when you guys get a chance. I wanna drive my car by, at least, tomorrow...By the way all these pics are of the top left section of where my dash used to be :) Is there where I should be looking for this "AD4 junction box"?
Also where might I splice the LED wires so that the LED comes on when the cruise is on? Any ideas?

Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
CTScottUSA, CT · May 2, 2009#178
Nice pictures! How hard was it to remove the top?

I am out right now for about two more hours. As soon as I am home, I'll look closer and get back to you.
nickhjortOneida, NY · May 2, 2009#179
Thank you so much, I have about 3 hours before the sun light is bye bye. It wasn't too hard to remove the top. Couple scratches and bruises on my hands, but now that I know how, of course, I can do it a lot quicker next time.
nickhjortOneida, NY · May 2, 2009#180
I'm not the best at reading wiring diagrams, but from what I can see my car doesn't even have this "ad4 plug" see picture...

Picture lost · i236.photobucket.com

And I can't find a plug hanging down that would plug into the Clutch Switch for Cruise Control. I can see where the switch mounts to the Clutch Pedal Mount...but no plug. Please help me :(
nickhjortOneida, NY · May 2, 2009#181
Also if this is the case, does that mean my ECU doesn't even have the Cruise control programmed into it, so I can't tap a wire right from the ECU itself? I hope I can do this...seeing as I already drilled my holes and put switches :) (kicks self for not getting priorities straightened out before starting project...1. Check to see if this will work...2. Then cut $hit up HAHAHA!! Not the other way around...)
Sir A.Y. AtoyotSurrey, BC Canada · May 2, 2009#182
Originally Posted by PK198105 ↑
ok it looks like its the grey connector right under the yellow one, although im not 100% sure.
I think you're right, especially since the factory diagram has a note saying "gray" on the picture of the AD4 plug.
CTScottUSA, CT · May 2, 2009#183
It is definitely the grey next to the yellow. Pin 1 is orange, 10 is yellow, and 5 in pink, and I see those clearly.

In the pics I don't see the right angle to tell if the Pin 6 blue wire (CCS) is there. It should go 5-pink, 6-blue, and 7-brown.
CTScottUSA, CT · May 2, 2009#184
As for the clutch switch wiring. At the ECM it is pin 56 of Connector C20. From there is connects through pin 14 of CA1 (the right rear connector in the under hood fuse box). It is a blue wire - shown below (For AT, two wires come into the one pin). For your test, you can jumper it to the white wire, two pins to the right of it.


Clutch Switch Wire.jpg
nickhjortOneida, NY · May 2, 2009#185
How you guys can read that diagram...I don't know, but thank god you can :) Thanks so much! You guys are awesome! I lost the last of my light though, so tomorrow I'm gunna finish this up and we'll see how it works. I'll take some more pictures as I splice and dice, just to kinda help with someone's DIY (I'm not gunna write one up...not a very good public speaker).
nickhjortOneida, NY · May 2, 2009#186
Well I just checked and I have no blue wire in slot 6...I have a blue wire in slot 15 though. That's on the top part, and on the bottom, I can't see under it right now to look for a wire, but when I unplug it and look in at the metal pins, there isn't one where that blue wire in slot 15 should be and there isn't one in slot 6. I hope I'm explaining this ok for now, until I can take more pics tomorrow. Is it possible there is a wire going into the harness, but there's no metal pin for the plug part? I dunno I'll check tomorrow when I don't have to use a flashlight :)
CTScottUSA, CT · May 2, 2009#187
Originally Posted by nickhjort ↑
Well I just checked and I have no blue wire in slot 6...I have a blue wire in slot 15 though. That's on the top part, and on the bottom, I can't see under it right now to look for a wire, but when I unplug it and look in at the metal pins, there isn't one where that blue wire in slot 15 should be and there isn't one in slot 6. I hope I'm explaining this ok for now, until I can take more pics tomorrow. Is it possible there is a wire going into the harness, but there's no metal pin for the plug part? I dunno I'll check tomorrow when I don't have to use a flashlight :)
The blue one in 15 is a CAN bus wire (CANH to the combination meter). So, it looks like your next stop is the ECM Connector A21, Pin 40. I would think that the absence of a wire in AD4-6 means that A21-40 will be empty as well.

nickhjortOneida, NY · May 2, 2009#188
So that means I can't do this huh?
nickhjortOneida, NY · May 2, 2009#189
I'm guessing there's a pin in the ECM at slot 40 for the cruise, but no wire on the plastic connector part. I wonder how hard it would be to just insert a wire on the connector. I'll have to see how the wires are in there and if you can get one of those little metal pins and attatch a wire to it.
CTScottUSA, CT · May 2, 2009#190
Originally Posted by nickhjort ↑
So that means I can't do this huh?
I'm starting to understand why the Rostra CC kit for 06-08's consists of more than a couple of switches and resistors...
nickhjortOneida, NY · May 2, 2009#191
Is your 07 the same PK198105? I wonder if you have the wiring under the dash unlike mine. If not, what would you do? Say oh well, hang up the towel? I really want this cruise cause I drive to work back and forth about 45 mins each way. It would be really helpful. I mean I'm pretty confident in my wiring abilities. Solder, heat shrink, etc. But of course I don't wanna fuck anything up so bad my dash is gunna end up like that guys in Australia I saw on here today.
nickhjortOneida, NY · May 3, 2009#192
Cool. Well we'll see tomorrow then.
nickhjortOneida, NY · May 3, 2009#193
Originally Posted by CTScott ↑
As for the clutch switch wiring. At the ECM it is pin 56 of Connector C20. From there is connects through pin 14 of CA1 (the right rear connector in the under hood fuse box). It is a blue wire - shown below (For AT, two wires come into the one pin). For your test, you can jumper it to the white wire, two pins to the right of it.

Picture lost · i236.photobucket.com
I know you said this is the wire for the clutch switch, and this is really more than a question than me trying to correct you, but this diagram makes it look like the black wire in box a25 is the clutch switch wire, and it looks like it's outside of that fuse box in the engine bay? Or is this some other totally different thing and I'm just getting myself more confused? Again I have a very vague understanding of these schematics and I'm just trying to learn some more about them 🤷

Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
goku87AK · May 3, 2009#194
Originally Posted by devinlamothe ↑
Anyone have trouble getting the steering wheel bolts off (the hex screws on the side)? I was going to try and just check the mounting spot today but couldn't even get the screws to budge.

I'm thinking I need a torque wrench?
a torque wrench would not help losening it. those are for tightening to a specific torque, ie ft-lb or in-lb, hence the name.

get a hammer. that might help. 👍 j/k j/k. dont really do that.
CTScottUSA, CT · May 3, 2009#195
Originally Posted by nickhjort ↑
I know you said this is the wire for the clutch switch, and this is really more than a question than me trying to correct you, but this diagram makes it look like the black wire in box a25 is the clutch switch wire, and it looks like it's outside of that fuse box in the engine bay? Or is this some other totally different thing and I'm just getting myself more confused? Again I have a very vague understanding of these schematics and I'm just trying to learn some more about them 🤷


The black wire is just a +12V source that flows through the clutch switch to the ECM input. The A25 connector is a nighmare to get at, so the white wire, I said to jump the blue to, is a much easier to get at alternative to the black wire in A25.
devinlamotheSudbury, Canada · May 3, 2009#196
Originally Posted by goku87 ↑
a torque wrench would not help losening it. those are for tightening to a specific torque, ie ft-lb or in-lb, hence the name.

get a hammer. that might help. 👍 j/k j/k. dont really do that.
I ended up getting it off ... I meant using the torque wrench as a breaker bar of sorts to give me leverage... and it worked. 😛
nickhjortOneida, NY · May 3, 2009#197
I see, I see. One other quick question. If I don't have all the wiring for this from the ECM, do you think I will have to do anything to get the brake switch to work, or will it already be programmed to turn off the cruise control when I hit the break? And I didn't see the plug for the clutch switch near where the switch goes...will I have to wire that once I buy the actual switch and take the jumper out?
CTScottUSA, CT · May 3, 2009#198
Originally Posted by nickhjort ↑
I see, I see. One other quick question. If I don't have all the wiring for this from the ECM, do you think I will have to do anything to get the brake switch to work, or will it already be programmed to turn off the cruise control when I hit the break? And I didn't see the plug for the clutch switch near where the switch goes...will I have to wire that once I buy the actual switch and take the jumper out?
If your Yaris has the brake switch, then your OK, as there is only one.

For the clutch switch, if this works, then you'll have to snake a wire from the under hood fuse box to the clutch switch and wire it yourself.
Sir A.Y. AtoyotSurrey, BC Canada · May 3, 2009#199
Originally Posted by devinlamothe ↑
I ended up getting it off ... I meant using the torque wrench as a breaker bar of sorts to give me leverage... and it worked. 😛
If you were really using a torque wrench as a breaker bar, you should know that this is a bad practice - it could make the torque wrench inaccurate (at least), or even destroy it. It's a much better idea to get an actual breaker bar. The one shown is likely bigger than you need, but they are available in a variety of sizes.
nickhjortOneida, NY · May 3, 2009#200
Ok...so the first test didn't go so hot. I have some pics...

Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com




So I started the car and the airbag light was on...duh...I don't have the passenger side plugged in. I pulled out the driveway nice and easy so as not to tip over my speedometer. I hit 40mph and press that "on" button...pop! There goes a fuse and all my dash lights start coming on and the "cool" light is blinking, and the car is boggin down. It didn't stall, but it wouldn't go faster. SO I pulled over and started checking fuses. My 7.5A Ignition fuse blew. Now I'm not sure if something crossed or what. I checked and double checked all my connections. Not bare wires, nothin'. I changed the fuse and everything was fine...safe to say I didn't try testing it again on the way home :)

Here's what I did:
I tapped the #40 pin on the ECM connector "A21" and ran the wire through the firewall and spliced it with the red wire from the switch setup.
Then I took a jumper...with a fuse... and jumped from the blue wire CTScott showed me in the engine compartment fuse box, but the white wire wasn't where it should be, but it was just to ground it. So I jumped it to another white wire that grounded (according to my multimeter touching the white wire and the frame...0 resistance) Anyway, I have no idea why it tripped the ingnition fuse. Please help me with any ideas. I hope i didn't fcuk up the ECM by blowing the fuse. Everything seemed perfectly fine when I replaced it. HELP! :(