Replies continued
TamagoOff Grid · Aug 21, 2009#151 Originally Posted by
cali yaris ↑ pluses and minuses for both, but I always enjoy a good pissing contest, so carry on.
positives for top mount
1. less than half the piping
2. cleaner engine bay by simplifying piping and routing
3. puts that gnarly scooped hood to actual use
4. does not block radiator (engine runs cooler)
5. can be thicker than front mount because of Euro NCAP (more room under hood)
6. because of the shorter piping, you see less pressure drop and quicker throttle response
7. because it sits horizontally in the engine bay, it can be sprayed with water easily for quick cooling
8. not damaged by road debris
negatives for top mount
1. if improperly set up, will be less efficient at cooling than a front mount
2. it's not "cool" looking. many ricers equate turbos with front mounts, and if you don't have a front mount, you obviously aren't making any power (this really should be a POSITIVE THING not a negative thing lol)
Positives for front mount:
1. looks cool
2. can be generally longer than a top mount (however, short fat intercoolers are more efficient [less pressure drop] than long thin coolers
Negatives for front mount:
1. silly piping running all over the place (in the case of rear mounted turbos, which is what this is about.. in a longitudinal engine, i.e. supra, front mount is perfect because the exhaust is on the passsenger side and intake is on the driver.. obvious routing is obvious)
2. less efficient because of all the extra bends and charge piping bends. every time you go WOT the turbo has to fill the entire length of charge piping AND intercooler before you actually see boost. this can exascerbate turbo lag
3. attracts unwanted attention (law inforcement comes to mind)
4. susceptible to road debris
5. blocks radiator and AC condenser
6. safety may or may not be compromised (bumper beam hacked) to make the IC/piping fit
that's all i have folks.
TheRealEnthMiami, FL · Aug 21, 2009#152tell it to em =D
ParmasThread starterML · Aug 21, 2009#153The only thing for me that comes to a disadvantage is turbo lag.. When I commited myself in this project I was ready to make sacrifices such as no AC and some fitment issues to the front (nothing big though).
In my case a top mount is not suitable mainly because of heat since it would be about few cm infront of the turbo exhaust plus it will be covered with excess heat emitted by the engine. If the turbo was on the rear lower side or at the lower front that would be a different story.
As in terms of space and organization of the engine bay, I see it more nice nd clean at the front which btw that is my opinion on my ride.
cali yarisCanoga Park, CA · Aug 21, 2009#154^ "attracts unwanted attention" and "susceptible to road debris"? LOL
RacerFreakXXXSomers NY · Aug 21, 2009#155I prefer a V mount intercooler, best of both worlds, rofl. Everything has its positives and negatives, imo you just have to find what setup works best for what you are using the car for. I don't know if that is even possible to put a V mount intercooler on the yaris seeing how short and stubby the front end is.
TamagoOff Grid · Aug 21, 2009#156 Originally Posted by
cali yaris ↑ ^ "attracts unwanted attention" and "susceptible to road debris"? LOL
hit a nice chunk of retread on the freeway and you won't LOL
PETERPOOPOahu · Aug 21, 2009#157 Originally Posted by
Tamago ↑ positives for top mount
1. less than half the piping
2. cleaner engine bay by simplifying piping and routing
3. puts that gnarly scooped hood to actual use
4. does not block radiator (engine runs cooler)
5. can be thicker than front mount because of Euro NCAP (more room under hood)
6. because of the shorter piping, you see less pressure drop and quicker throttle response
7. because it sits horizontally in the engine bay, it can be sprayed with water easily for quick cooling
8. not damaged by road debris
negatives for top mount
1. if improperly set up, will be less efficient at cooling than a front mount
2. it's not "cool" looking. many ricers equate turbos with front mounts, and if you don't have a front mount, you obviously aren't making any power (this really should be a POSITIVE THING not a negative thing lol)
Positives for front mount:
1. looks cool
2. can be generally longer than a top mount (however, short fat intercoolers are more efficient [less pressure drop] than long thin coolers
Negatives for front mount:
1. silly piping running all over the place (in the case of rear mounted turbos, which is what this is about.. in a longitudinal engine, i.e. supra, front mount is perfect because the exhaust is on the passsenger side and intake is on the driver.. obvious routing is obvious)
2. less efficient because of all the extra bends and charge piping bends. every time you go WOT the turbo has to fill the entire length of charge piping AND intercooler before you actually see boost. this can exascerbate turbo lag
3. attracts unwanted attention (law inforcement comes to mind)
4. susceptible to road debris
5. blocks radiator and AC condenser
6. safety may or may not be compromised (bumper beam hacked) to make the IC/piping fit
that's all i have folks.
not bias at all, of course.
TamagoOff Grid · Aug 21, 2009#158 Originally Posted by
PETERPOOP ↑ not bias at all, of course.
not at all..
let's see an intelligent bias in the other direction ;)
rob323Joyner, Brisbane · Aug 23, 2009#159Don't you guys have access to barrel type water to air intercoolers over there? Best of both worlds.
TamagoOff Grid · Aug 24, 2009#160 Originally Posted by
rob323 ↑ Don't you guys have access to barrel type water to air intercoolers over there? Best of both worlds.
only if you have a cold water supply (ice chest) in your car.....
rob323Joyner, Brisbane · Aug 24, 2009#161PHXDEMONPhoenix, AZ · Aug 24, 2009#162 Originally Posted by
rob323 ↑
only 1600 dollars. fuuuuuuck that 😆
rob323Joyner, Brisbane · Aug 24, 2009#163Yes it's a lot of money but it is all relative (especially if you already have tens of thousands invested in your car).
But I suggested it for the concept, not that product specifically.
cali yarisCanoga Park, CA · Aug 25, 2009#164^
= $1,384 USD
You can now say f*ck that to THAT, but at least you'll be saying it to the right amount.
ParmasThread starterML · Aug 25, 2009#165 Originally Posted by
rob323 ↑
The product looks effective but for our engines is purely a waste of money.
rob323Joyner, Brisbane · Aug 25, 2009#166It's the thought that counts.
Make up your own using bits from an old GT4 celica or a Subaru RS Liberty/ legacy. More than adequate for 300 hp and at a fraction of the cost and you still get all the benefits.
ParmasThread starterML · Aug 26, 2009#167+1 to ^^^^
ParmasThread starterML · Sep 18, 2009#168Been about a month since my last post.... within this time these are the updates:
- Installed JDM (carbon fibre) adjustable fuel regulator ..
http://ajpdistributors.com/unjdmfuprrec.html - Upgraded custom fuel rail with return line
- Custom fitting with 3 barbs on the intake for independent mainfold pressure / BOV and Boost controller
Still having trouble with initial tuning between 1200 - 3500 rpm ranges.... will update with pics and videos next time
botchilahPhilippines · Sep 22, 2009#169Synpase Engineering / Synchronic BOV for the win!
I have had a SARD, Blitz, Apexi and HKS in my other car. Nothing great. The Synapse one really helped improve spool, response and eliminate compressor surge
cali yarisCanoga Park, CA · Sep 22, 2009#170ParmasThread starterML · Sep 22, 2009#171 Originally Posted by
cali yaris ↑
The regulator is branded JDM, a high quality japanese brand. The AEM regulator is sure one of the best and one of the pricest aswell. The AEM regulator is specifically designed for higher power engines than the 1NZ can handle and it's just too over spec.
Will post some pics later this week as we are limited in time and very occupied making it stable on Full Sequential Mode Operation
cali yarisCanoga Park, CA · Sep 22, 2009#172You are incorrect about the AEM regulator being "too over spec". There is no lower power limit for its use. I used it at 180 whp. And, like me, since you'd like to make over 300whp, it's an appropriate, proven and reliable part.
As for JDM Sport and product quality, maybe we should take a look at their turbo kit for $1399. Would you also put that on your car?
http://www.advancedjdmparts.com/prod...at=1164&page=1 ParmasThread starterML · Sep 23, 2009#173 Originally Posted by
cali yaris ↑ You are incorrect about the AEM regulator being "too over spec". There is no lower power limit for its use. I used it at 180 whp. And, like me, since you'd like to make over 300whp, it's an appropriate, proven and reliable part.
As for JDM Sport and product quality, maybe we should take a look at their turbo kit for $1399. Would you also put that on your car?
http://www.advancedjdmparts.com/prod...at=1164&page=1
You didn't understood right my previous post... I didn't say the AEM reg would not work with "low" power engines, I only mean that when one buy an AEM regulator he has in mind to go over 500bhp or else have some money to waste for the excess price compared to others.
My first preference was the RS5 Ford cosworth regulator use universally on tuned engines but it was out of stock here so we got the JDM one.
As for the link, if I would choose betwen the JDM kit and custom, I will go custom as I did of course :)
cali yarisCanoga Park, CA · Sep 24, 2009#174Well, we are all watching and waiting and cheering you on for a great tune and lots of power. Keep us all posted! Once a month is not enough!
ParmasThread starterML · Sep 25, 2009#175Today we had some time to continue tuning the engine although remain some minor things to correct and the tune will finally come to an end...
One of the problems we are getting is that the engine freak in between 1.5K - 2.5k rpm range during throttle. Beyond 2.5K till 6,2k the engine shows us some real power :)
Still on baby!....
ParmasThread starterML · Sep 28, 2009#176Here are some pics of the latest revision of the engine bay ....
4 attachments not included in this copy
ParmasThread starterML · Oct 3, 2009#177cali yarisCanoga Park, CA · Oct 3, 2009#178What size injectors and what octane fuel?
CONGRATS MAN, enjoy it!!
no you can fix the left brake light 😉
lilredrocketDFW, Texas · Oct 3, 2009#179Sweet!!!! Having fun crusing around town?
ParmasThread starterML · Oct 3, 2009#180 Originally Posted by
cali yaris ↑ What size injectors and what octane fuel?
CONGRATS MAN, enjoy it!!
no you can fix the left brake light 😉
340cc injectors probably used on stock celicas.... fuel octane bad as below 90... Although with every full tank I fill up 1 litre octane booster.
I will fix for sure the brake light... Within these months I was too busy looking at the engine bay instead :)
Next mods DEI silicone spray on the exhaust mainfold/downpipe/turbo ceramic + DEI Titanium best wrapping out there.
In need of upgraded front suspension + semi-slics tires...
Just booked some drag races for next weekend :)
cali yarisCanoga Park, CA · Oct 3, 2009#181^ nice, can't wait to see your times! going to be QUICK!!
changchewsoonMalaysia · Oct 4, 2009#182your car looks and sounds great my friend!
now, may i suggest a set of water/methanol injection kit? :)
ParmasThread starterML · Oct 4, 2009#183Thanks changchewsoon that will be an option for the coming future but still not in need since my intercooler hold intake temps below 25c @ 9psi.
First option will be upgrading to larger injectors maybe 632cc ones then upping the boost to finally another good tuneup session
changchewsoonMalaysia · Oct 5, 2009#184is your current injector size insufficient? i bought FIC 445cc injectors but have not used them yet.
ParmasThread starterML · Oct 5, 2009#185 Originally Posted by
changchewsoon ↑ is your current injector size insufficient? i bought FIC 445cc injectors but have not used them yet.
Correct... the injectors are about 86% duty @ 6000rpm @ 9psi. We were surprised since they are rated above 300bhp. That depends your octane mixture you are giving to the engine so if we manage to use higher grade fuel we will manage higher power with same duty cycle on the injectors.
Update : Toyo Semi-slics 195x50 888 tires were installed on all 4 wheels. Gained more handling stability and traction :)
CASTREXCosta Rica · Oct 5, 2009#186
Update : Toyo Semi-slics 195x50 888 tires were installed on all 4 wheels. Gained more handling stability and traction :)
Nice 👏
ParmasThread starterML · Oct 30, 2009#187Well got my hands dirty again removing downpipe and several connections to prepare them for thermal wrapping etc... and I began wondering about the braking system.
During the last runs I noticed that the braking of the car takes too much to come to a stop also when not driving that fast. I am suspecting that the heat generated by the turbo exhaust chamber is causing the "compensator" situated just few cm behind to overheat o-rings inside. I am thinking of moving the hole part to the right (front view) but that makes some more work and more expenses... I also thought of coating it with silicone spray which is designed for extreme temperatures like turbos.
What do you suggest me to do?
2 attachments not included in this copy
cali yarisCanoga Park, CA · Oct 30, 2009#188make a little insulated "heat box"
ParmasThread starterML · Oct 30, 2009#189 Originally Posted by
cali yaris ↑ make a little insulated "heat box"
What do you mean by a heat box?
You have to note that it is really tight in there!
cali yarisCanoga Park, CA · Oct 30, 2009#190I'll try and take a pic from mine
ParmasThread starterML · Oct 30, 2009#191 Originally Posted by
cali yaris ↑ I'll try and take a pic from mine
That would be appreciated!
By the way what oil do you use for your motor Garm?
I use Sunoco racing oil full synthetic 10/60
ParmasThread starterML · Nov 4, 2009#192Hard time to remove exhaust but finally coming to an end!
Turbo exhaust chamber, downpipe and exhaust manifold coated with DEI silicone high temp resistance paint. After paint dry wrapped turbo and downpipe with DEI titanium wrapping. Hopefully to get better engine bay temps.
Next......
- Finishing some wiring organization
- Red paint to engine cover and turbo/intercooler tubing
- Adding sandwich adapter for oil temp and pressure
5 attachments not included in this copy
cali yarisCanoga Park, CA · Nov 4, 2009#193Parmas, here is the insulation box I made for the fuel system. Just a thought. You could do the same thing for your brake cylinder in the engine bay -- or anything else. This is pretty stiff aluminum with insulation on one side:
Picture not included in this copy
ParmasThread starterML · Nov 5, 2009#194Thanks for the idea garm will check on it surely...
ParmasThread starterML · Dec 2, 2009#195Some enhanced new looks.... All paint is designed to work above 500DegreesF.
Next completition of new coolant piping which will be come blue...
Also done lots of shielding at the back panel area to protect brake lines from overheating.
4 attachments not included in this copy
cali yarisCanoga Park, CA · Dec 2, 2009#196Looks good man!!
advocatelocation · Dec 2, 2009#197God this thread rocks.
Blown_xaVirginia · Dec 2, 2009#198 Originally Posted by
Tamago ↑ positives for top mount
1. less than half the piping
2. cleaner engine bay by simplifying piping and routing
3. puts that gnarly scooped hood to actual use
4. does not block radiator (engine runs cooler)
5. can be thicker than front mount because of Euro NCAP (more room under hood)
6. because of the shorter piping, you see less pressure drop and quicker throttle response
7. because it sits horizontally in the engine bay, it can be sprayed with water easily for quick cooling
8. not damaged by road debris
negatives for top mount
1. if improperly set up, will be less efficient at cooling than a front mount
2. it's not "cool" looking. many ricers equate turbos with front mounts, and if you don't have a front mount, you obviously aren't making any power (this really should be a POSITIVE THING not a negative thing lol)
Positives for front mount:
1. looks cool
2. can be generally longer than a top mount (however, short fat intercoolers are more efficient [less pressure drop] than long thin coolers
Negatives for front mount:
1. silly piping running all over the place (in the case of rear mounted turbos, which is what this is about.. in a longitudinal engine, i.e. supra, front mount is perfect because the exhaust is on the passsenger side and intake is on the driver.. obvious routing is obvious)
2. less efficient because of all the extra bends and charge piping bends. every time you go WOT the turbo has to fill the entire length of charge piping AND intercooler before you actually see boost. this can exascerbate turbo lag
3. attracts unwanted attention (law inforcement comes to mind)
4. susceptible to road debris
5. blocks radiator and AC condenser
6. safety may or may not be compromised (bumper beam hacked) to make the IC/piping fit
that's all i have folks.
good points. A top mount will never provide the efficiency of a front mount though. The main reason WRC Subarus use a top mount is so the intercooler doesnt get ripped off landing crazy jumps. And WRC cars im pretty certain don't run on pump gas, so they don't need the cooling efficiency to supress detonation.
There is a forumula to calculate temperature drop vs. pressure drop. The benefits of temperature drop far outweigh pressure drop. And also the general formula to see the benifits of temperature drop in the charge stream. For every 10 degree drop is a 1% gain in hp. That may not sound like much, but a good example is my car... I ran no intercooler but with WMI. My MAF sensor temp probe was reading up to 280 degrees @17psi (Blow through set-up, before meth).
I just dropped in a Evo intercooler, The charge temps are now the same as ambient, in fact on a few dyno pulls during my last tune the temperature DROPPED a few degrees when boost hit. That's over a 200 degree drop...
At the same boost with the same timing I gained 25whp and 32ft.lbs. of torque. Also my spool up is within 200rpm as before, that isnt even noticable.
I have installed many front mount kits on STI's and Mazda speed 6/3's. Tuning past 250whp (with top mount) on our dyno is like pulling teeth for gains because of the heatsoak. To prevent risk of detonation more timing needs to be pulled. Any good tuner would agree to that. Even the Cobb base maps for the MS3 are specified for either a top or front mount(more conservative timing for top mount).
One thing I constuctively dissagree with is that the engine bay is cleaner with a top mount... I don't think so. Especially with the yaris and Ms3. Just about the only place for the top mount would be on top of the engine cover. I always found it to be a pain to have to remove pipes to service the car. They are routed to where you have to remove them to check spark plugs( which is something to be checked often on a aftermarket boosted car). And on the Subie you have to remove the intercooler to service the transmission /turbo/downpipe. The newer Subies have a smaller sized top mount with composite casing which makes life easier for working on the car, composite casing is for less heatsoak.
I say front mount.
good build, and whp numbers yet?
advocatelocation · Dec 3, 2009#199So if front mount creates huge turbo lag and top mount spools faster but hotter (and thus less boost), how the hell do you pick which one you want? Sounds like very big drawbacks on both parts.
I would think a larger engine, which creates more overall exhaust, wouldn't suffer as much from excess lag from a front mount versus a Yaris which burns much less overall fuel. Correct?
ParmasThread starterML · Dec 3, 2009#200Job finally finished although it came dark for a good photo... Will get some good photos with all completed...
Next -> lots of tuning and increasing gradually some boost :)
Still not dynod car so I don't want to throw numbers until finished
1 attachment not included in this copy