Yarisworld Archive

"Parmas" Motor

490 posts · 124,989 views · page 1 of 10

ParmasOriginal postML · Feb 13, 2009#1
Because of the previous hack the thread was lost and since the project is coming to a finish I am considering to update as far as I can on how a modified 1NZFE can perform.

The motor was bought from Jess (TurbineTech) which was owned by Bruce (TurboEcho2005). During the time discussing with Jess he pointed that a different transmission is needed to get the most out of it. I agreed to buy a C160 6spd close transmission with LSD used on stock Corrolla GTs (4AGE engine). When the motor arrived a full internal check was made and we think that more than 200Hp could be obtained.

Recently the setup was installed into the car. The transmission needed a spacer since it was hitting the chassis and the turbo exhaust mainfold custom made by Jess was only for left hand drive.

Now the car is prepared into the garage for a new stainless turbo mainfold and str8 exhaust to be completed for the next days.

Will update more as soon as I get some further news!

9 attachments not included in this copy

Replies 489

PETERPOOPOahu · Feb 13, 2009#2
beautiful!
ParmasThread starterML · Feb 13, 2009#3
Btw is there any Platinum spark plugs for the 1NZFE?
cali yarisCanoga Park, CA · Feb 13, 2009#4
I think you can now call it the Parmas motor project -- after this work, it is really yours. Awesome! 👏
CASTREXCosta Rica · Feb 13, 2009#5
Originally Posted by Parmas ↑
Btw is there any Platinum spark plugs for the 1NZFE?
I don't think Platinum is the best choice for boost applications.

You need either the cheaper copper ones or the expensive Iridiums.

Must people use the coppers for the tunning period and once the engine is all set go to the Iridiums for daily usage.

And yes, there are Denso's and NGK's for the 1NZFE in several heat ranges.
whooppee777Maryland · Feb 13, 2009#6
that engine would look soooooo sick with richard holdeners intake manifold.🤤
cali yarisCanoga Park, CA · Feb 13, 2009#7
^ so would mine 🙄
turboecho2005Ottawa, Ontario · Feb 13, 2009#8
Very nice

It looks great! And I think it's about time you called it your own project!

I also have no doubts that you will make 220-240whp. I was making around that before the 4age swap.

Good luck with the project. I look forward to following this thread.

Btw I think the mods should change the title!
ParmasThread starterML · Feb 13, 2009#9
Originally Posted by CASTREX ↑
I don't think Platinum is the best choice for boost applications.

You need either the cheaper copper ones or the expensive Iridiums.

Must people use the coppers for the tunning period and once the engine is all set go to the Iridiums for daily usage.

And yes, there are Denso's and NGK's for the 1NZFE in several heat ranges.
What do you think about these? http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=380100289012

Originally Posted by whooppee777 ↑
that engine would look soooooo sick with richard holdeners intake manifold.🤤
If all works fine and remain some free cash to spend then a custom intake mainfold will be taken into consideration beyond 15psi boost!

BTW I cannot forget about the gauges, exhaust tips and oil cooler ... here are some pics

5 attachments not included in this copy

CASTREXCosta Rica · Feb 13, 2009#10
Originally Posted by Parmas ↑
Yeap, those are the recomended iridiums for the normally aspirated Yaris BKR5EIX.

But for your engine you need to go 1 step colder. Perhaps even 2 steps colder if you are going with high boost (you shoud ask this to your tuner).

On NGK the next step colder would be BKR6EIX

On NGK, the higher the number , the colder the plug. Heat range 6 is one step colder than a heat range 5.

side note: On Denso is the other way around... The Higher the number, the colder the plug.

Those should be easy to find on your local auto parts shop. Just go and ask for Yaris Iridium plugs, and then go for one step colder.

Just stick with either NGK or Denso.
islagamegypt · Feb 13, 2009#11
beautiful work good information also about the plugs excellent
ParmasThread starterML · Feb 14, 2009#12
Originally Posted by CASTREX ↑
Yeap, those are the recomended iridiums for the normally aspirated Yaris BKR5EIX.

But for your engine you need to go 1 step colder. Perhaps even 2 steps colder if you are going with high boost (you shoud ask this to your tuner).

On NGK the next step colder would be BKR6EIX

On NGK, the higher the number , the colder the plug. Heat range 6 is one step colder than a heat range 5.

side note: On Denso is the other way around... The Higher the number, the colder the plug.

Those should be easy to find on your local auto parts shop. Just go and ask for Yaris Iridium plugs, and then go for one step colder.

Just stick with either NGK or Denso.

Thanks for the info mate!
ParmasThread starterML · Feb 15, 2009#13
I got some news and got some pics for you to check out!

The new exhaust mainfold is ready (the stainless one) now remains the intercooler piping which should be ready within the next days.

Btw the last picture shows that due to the engine not levelled the bellow of the shaft seem stressed and not in order. We will try to make it levelled as soon as all the stainless work is ready

7 attachments not included in this copy

cali yarisCanoga Park, CA · Feb 15, 2009#15
Those are both good -- I like TIAL products myself. What wastegate are you going to use? Don't forget I'm a Blitz dealer so if you choose that let me ship you one!
CASTREXCosta Rica · Feb 15, 2009#16
I would go for the HKS Super sequential... but that is just for personal preference.

Both are quality units and will get the job done!


And agree with Cali, for the wastegate look for Tiaal, that is good stuff. That is if you are not using and internally wastegated turbo...

BTW, what turbo will you be using?

And what kind of driving would you be doing with your car once done?

Are you using the Yaris drive shafts on the c160 tranny or something else?
If you are planning to do some drag racing, or hard launches and still have the yaris shafts you should be looking for upgraded units.
ParmasThread starterML · Feb 15, 2009#17
Originally Posted by cali yaris ↑
Those are both good -- I like TIAL products myself. What wastegate are you going to use? Don't forget I'm a Blitz dealer so if you choose that let me ship you one!
I will be interested to get some parts from you if I will not pay duty imports. So my first preference are from ppl inside European Union.

Originally Posted by CASTREX ↑
I would go for the HKS Super sequential... but that is just for personal preference.

Both are quality units and will get the job done!


And agree with Cali, for the wastegate look for Tiaal, that is good stuff. That is if you are not using and internally wastegated turbo...

BTW, what turbo will you be using?

And what kind of driving would you be doing with your car once done?

Are you using the Yaris drive shafts on the c160 tranny or something else?
If you are planning to do some drag racing, or hard launches and still have the yaris shafts you should be looking for upgraded units.
The turbo is a Garrett GT2860R ball bearing turbo with .64 turbine and I intend to use internal wastegate for now.

The intensions are mainly low class drag racing / car shows and sunday cruises. The shafts will probably need to be upgraded until then I prevent hard launches from stop signs :)

Regarding the BOV each Blitz & HKS are a quality brands. The difference is that of the price difference though
PHXDEMONPhoenix, AZ · Feb 15, 2009#18
Nice progress
turboecho2005Ottawa, Ontario · Feb 16, 2009#19
I am not sure why everyone recommends axles... i have yet to break the stock echo axles. Both with my old motor that params has and my new blacktop setup. Plus i've been to the track with it a few times too...
CASTREXCosta Rica · Feb 16, 2009#20
Did you ever launched the car with drag tires on it?

^^^

That's the kind of abuse I was talking about.
But for street use and even road track use as long as you are gentle, stock axles should be fine. I guess it all depends on the way you apply the power.
ParmasThread starterML · Feb 19, 2009#21
Well I decided to stick with Castrex recomandation so an HKS SSQV will be!

The intercooler piping is expected to finish on the next 3 days....
ParmasThread starterML · Feb 21, 2009#22
UPDATE:

Today I got a call that the intecooler tubing is finally finished..... Although there is more things to settle and organize!

5 attachments not included in this copy

kounj · Feb 21, 2009#23
👏
PHXDEMONPhoenix, AZ · Feb 21, 2009#24
Nice 🤤 More pics of custom work to front bumper?
ParmasThread starterML · Feb 22, 2009#25
Now I am trying to figure out how to make arrangments since from the pics above one can notice that the turbo is too close to braking divider and some fuel and oil lines. Also there is still a problem how I can manage to fit an air filter back there..... any suggestions appreciated!
ParmasThread starterML · Feb 25, 2009#26
Originally Posted by whooppee777 ↑
that engine would look soooooo sick with richard holdeners intake manifold.🤤
Hey man I checked out a thread on scionlife about the intake mainfold made by user castrex (not sure if is the same person in this forum) and it seems interesting. Do you know if it is for international sale and if it fits the first gen yaris?
CASTREXCosta Rica · Feb 25, 2009#27
Yeah it was me... but If I were you I would not wait for that manifold.

This is been going on for months and months and months...

The company that was supposed to manufacture the intake, scrapped the project early this year.

And the guy doing the design has not posted a thing for several weeks now.😠
cali yarisCanoga Park, CA · Feb 25, 2009#28
^ exactly, quite frustrating really
ztrack157Biggs, CA · Feb 25, 2009#29
I think holdner's intake was a pipe dream. It was supposed to be done last year and multiple people committed to buy it. Nothing will ever come of it.
eTiMaGoBangkok, Thailand · Feb 26, 2009#30
Originally Posted by ztrack157 ↑
I think holdner's intake was a pipe dream.
Intentional pun? 😆

But yeah, it's really too bad, real simple, one-piece bolt-on horsepower, what's not to like about that? 🤷
ParmasThread starterML · Feb 26, 2009#31
Originally Posted by CASTREX ↑
Yeah it was me... but If I were you I would not wait for that manifold.

This is been going on for months and months and months...

The company that was supposed to manufacture the intake, scrapped the project early this year.

And the guy doing the design has not posted a thing for several weeks now.😠
Ok just a thought, so it has to be custom made aswell 😲 although still not considering higher boost than the plastic mani can hold, at least for now!
ParmasThread starterML · Feb 28, 2009#32
The HKS SSQV BOV is here! Since now I am glad to choose this nice looking BOV. During the time reading the manual, there is an option to install the Recirculation fitting (http://www.hksusa.com/products/?id=798) . Does anyone consider this? What are the prons & cons when using this option?
cali yarisCanoga Park, CA · Feb 28, 2009#33
recirc = quieter and cleaner (since it's not blowing off into your engine bay).

I have recirc on my tC, an open air on the Yaris. I like both ways.
ParmasThread starterML · Feb 28, 2009#34
Originally Posted by cali yaris ↑
recirc = quieter and cleaner (since it's not blowing off into your engine bay).

I have recirc on my tC, an open air on the Yaris. I like both ways.
Thanks for the info garm will do without recirc so 😁
CASTREXCosta Rica · Feb 28, 2009#35
You can always leave the recirculation port ready in case you want to use it in the future.

That way, changing from one set up to the other it would be a matter of a few minutes. Just install the fitting and conect the return hose...

The HKS unit makes an amazing sound... so it's nice to have it open vented...

But if you want to go into "sleeper" mode... you can recirculate it 😈
CASTREXCosta Rica · Feb 28, 2009#36
But the again.... after looking at your front bumper modification and that FMIC you will have a hard time going into "sleeper" mode.😲

Looking forward to see some videos of your car running! it will be amazing
ParmasThread starterML · Mar 12, 2009#37
Anyone could suggest me a quality oil pressure sensor to be used on the 1NZFE?

The sensor must be compatable with the G-TECH PRO EGS gauge http://www.gtechpro.com/egs.html
ParmasThread starterML · Mar 16, 2009#38
Since no suggestions were posted I decided to go with the R-spec High precision pressure sensor http://www.rspec.co.uk/index.php?mai...roducts_id=487

During a discussion with my electrical manager on the car engine management he said that the stock ecu is needed for basic activity like radiator fan power on, dashboard tach and fuel pump power on. So my question is, could the stock ecu interfere with the upgraded ecu in any means?

Wiring is expected to be ready by tommorrow
cali yarisCanoga Park, CA · Mar 16, 2009#39
As for the sensor, did you email G Tech Pro for what sensor would be compatible?

he said that the stock ecu is needed for basic activity like radiator fan power on, dashboard tach and fuel pump power on.
This depends on what management you are using. I'm having my standalone control fans and pumps but not the dashboard stock gauges (which are all CAN). I'll probably need an aftermarket fuel gauge.
ParmasThread starterML · Mar 31, 2009#40
UPDATE:

Wiring about to finish. It only remains the high tension and then we go!

BOV and coil pack installed! A turbo shield was installed aswell to prevent brake lines and other main wiring overheating

BTW I am told that the 1NZFE internal springs are compatable with the celica ones? Anyone knows something about?

3 attachments not included in this copy

cali yarisCanoga Park, CA · Mar 31, 2009#41
nice progress! ^ You have some wiring to clean up!
ParmasThread starterML · Apr 1, 2009#42
Originally Posted by cali yaris ↑
nice progress! ^ You have some wiring to clean up!
Thanks garm will organize the wiring neatly this week!
cali yarisCanoga Park, CA · Apr 1, 2009#43
Looks like the fuel gauge works ok without the ECU in the car in mine. Don't know about the speedometer yet, will hope for the best.
ParmasThread starterML · Apr 2, 2009#44
Originally Posted by cali yaris ↑
Looks like the fuel gauge works ok without the ECU in the car in mine. Don't know about the speedometer yet, will hope for the best.
In my case the stock ecu controls basically the dash electronics. The only thing will not work is the tach in that case I have an aftermarket one.
ParmasThread starterML · Apr 4, 2009#45
Finally today we managed to start engine. We tuned the idling and worked stable. One thing that impressed me is that although the exhuast is cut out from the middle straight tru, the engine was really smooth, at least I expected to be many more louder than that.

Tomorrow will get some pics for the complete setup.
changchewsoonMalaysia · Apr 5, 2009#46
your ride is off the chart man, can't wait to see the final result. please keep us posted!
AlexNet0Rockland, ME · Apr 5, 2009#47
Originally Posted by Parmas ↑
Finally today we managed to start engine. We tuned the idling and worked stable.

mm, yummy...turbo 1nz
ParmasThread starterML · Apr 8, 2009#48
Here are some recent pics of the complete setup.

The fuel pressure regulator was not installed because the stock one can hold about 17psi of boost. When I have some more cash ready I will upgrade the intake mainfold and the regulator at once.

Because of cash tune up is moved to 2 or more weeks ahead which in the meantime I will install all the gauges necassary and a dedicated computer system into the car to monitor and control the ecu in realtime.

3 attachments not included in this copy

eTiMaGoBangkok, Thailand · Apr 8, 2009#49
Parmas, I see your engine has a separate distributor for the spark plugs, was this stock on your car?
ChinoCharlesOH · Apr 8, 2009#50
Vroom vroom!