Replies continued
tooterThread starterLos Angeles · May 10, 2013#1201 Originally Posted by
cali yaris ↑ 1. We only kept one dyno chart
That's odd. All of my pulls are stored at the dyno shop. I picked the best ones just like you did and posted the results down to the hundredth of a hp. There is no need for me to claim anything as I'd never impose upon others to give me their trust.
the best one in my judgement. I stand by it
There is no need to stand by what everyone sees for themselves because what is self evident stands on its own merit.
and the customer feedback has been excellent in terms of noticeable power gains...
Of course. You posted a good chart of a good product.🙂
If you don't believe that we got 7hp on one pull, that is significant, tooter; most people that know or buy from me by now trust me to tell the truth. Do you?
I honestly haven't had enough personal interactions with you to know one way or the other. So it's understandable why you're offended at even being questioned. I am hoping that you won't go down that well trodden road of "How dare you accuse me of not being honest." just because of an open question.
My point is that no one ever needs to trust anything I say. Because I believe that no one is entitled to the trust of others, I never expect anyone to trust me. So instead of becoming offended I welcome the opportunity to earn the trust of others.
Golden Eagle is a fabricator. They didn't design, nor do they "market" the product.
Origin Design is my fabricator and I'm the designer, so my name is on my product.
They had nothing to do with our design or testing, nor do they have a copy of the dyno results. We do that. I am the co-designer, and my company markets the product.
Their name is on the product.
If the folks here believe that I'm being unreasonable, this will offer you the opportunity to look good in comparison because I don't mind appearing to be the "bad guy". 👍
cali yarisCanoga Park, CA · May 10, 2013#1202 I honestly haven't had enough personal interactions with you to know one way or the other.
Thank you for confirming that I have not yet earned your trust, tooter. I hope to change that. You've earned mine.
Golden Eagle gave us the choice of what name to put on the product. It was my decision to put their name on it, as their name is more recognizable. It doesn't mean they designed or tested the product -- which they didn't.
Seems to me it's time to get back to YOUR project in this thread so we can follow along.
GolddeenohColumbia, SC · May 10, 2013#1203here Garm now play nice.
Picture not included in this copy
cali yarisCanoga Park, CA · May 10, 2013#1204^ Sweet. tooter, you can even have this one...
Picture not included in this copy
tooterThread starterLos Angeles · May 10, 2013#1205Thanks, Garm... I use this. 😉
Picture not included in this copy
cali yarisCanoga Park, CA · May 11, 2013#1206And then this...?
Picture not included in this copy
tooterThread starterLos Angeles · May 11, 2013#1207More like this... 😉
Picture not included in this copy
I've always loved trains so I built my own little backyard riding railroad. It took a year and a half to lay 200 feet of rail. I designed and built this pull cart.
Picture not included in this copy
It's a blast to ride because the grades are as steep as 7% making it as much of a rollercoaster as a train.
The neighborhood kids love it too. 😉
tooterThread starterLos Angeles · May 11, 2013#1208cali yarisCanoga Park, CA · May 11, 2013#1209yeah, that's pretty cool. You've made a lot of progress since the earlier videos.
What controls the speed besides the track itself? Brakes?
tooterThread starterLos Angeles · May 11, 2013#1210Gotta have brakes on this railroad or you die! 😆
Picture not included in this copy Both geared axles are chained together so when the brake pads press against the front wheels, and rears also slow down.
jetblastNor Cal · May 12, 2013#1211How about Fred Flintstone Feet!!!! Yabba Dabba Dooo! C'mon ride the train, choo, choo, rowdy.....boomsha, boomsha the song is now stuck in my brain.
And now I'm tryin' to remember who sang it! ADD can really be a pain. Squirrel!!!!!
tooterThread starterLos Angeles · May 13, 2013#1212 Originally Posted by
jetblast ↑ How about Fred Flintstone Feet!!!! Yabba Dabba Dooo!
I tried a few wild rides on the flat car using "foot brakes". Too much velocity and I just get thrown off when the flat car hits the curves at the bottom of the hill. 😉
The entire line of tooter products is now back in stock. 🙂
Picture not included in this copy tooter manifold:
$450 + free shipping
tooter build your own manifold kit
$265 + free shipping
tooter supercharger 1zz throttle body base adaptor
$185 + free shipping
Ryze268Antigua & Barbuda · May 13, 2013#1213How much does the mani weigh ?
tooterThread starterLos Angeles · May 13, 2013#1214It weighs 7 3/4 pounds...
Picture not included in this copy I'm pretty sure I had done a comparison with the weight of the stock manifold. It's likely buried somewhere in this thread but I couldn't find it.
The power gains from the back to back comparative dyno run charts are:
tooter manifold + stock 1NZ throttle body: +
3.4hp +
1.3tq
tooter manifold + 1ZZ throttle body: +
6.6hp +
2.8tq
All the figures are rounded down to the nearest tenth so as not to falsely enhance them.
Ryze268Antigua & Barbuda · May 13, 2013#1215Depending on how the 'ole pay check looks, I might be placing an order at the end of this month
You should start a fresh thread =P
tooterThread starterLos Angeles · May 13, 2013#1216No problem, there's no time limit. I'll always be keeping a small inventory of all the parts whatever you decide. 👍
thefallsSunny place · May 14, 2013#1217Has anyone tested this manifold "Tooter" on a boosted motor ?
Thanks.
3cyltrboOttawa · May 14, 2013#1218Sorry I don't want to read back through the entire thread:
-What about finishing / can you offer powdercoating or polishing?
-remind me again, will I have problems installing this in a 2010 5spd hatchback with an AEM CAI? (including a 1zz TB that I have already)
-you've been showing one with a new design (the alien looking end thing) - its pictured below and you mentioned it in post #1191................................... when will this version be coming out? (you called it the ET)
Picture not included in this copy Cheers
Will
ntr1_1@hotmail.com tooterThread starterLos Angeles · May 14, 2013#1219 Originally Posted by
3cyltrbo ↑ Sorry I don't want to read back through the entire thread:
I totally understand... it's kinda huge. 😉
-What about finishing / can you offer powdercoating or polishing?
No, however the manifold comes stainless steel bead blasted and ready to accept any finish you'd like to apply.
Picture not included in this copy -remind me again, will I have problems installing this in a 2010 5spd hatchback with an AEM CAI? (including a 1zz TB that I have already)
The tooter manifold relocates the throttle body about 2 inches to the right from the stock location. So if your intake has enough room to move about 2 inches, you'll be fine. This is how the throttle body looks with the stock air box.
Picture not included in this copy Here you can see the difference in the throttle body's orientation from stock by its relation to the stock air box. 2 inches were trimmed off of the stock rubber intake tube to make it fit the stock air box. Your CAI's mounting point locations would be different as well as the location of the filter in your fender well so it would definitely need to be modified. Shortening it a couple of inches and adding a silicone coupling would likely work.
-you've been showing one with a new design (the alien looking end thing) - its pictured below and you mentioned it in post #1191................................... when will this version be coming out? (you called it the ET)
Picture not included in this copy
Cheers
Will
ntr1_1@hotmail.com
Right now the tooter et is just a crazy experiment. 😆
I'm going to build it, dyno it, and drive around with it on my Yaris just to see how it works.
tooterThread starterLos Angeles · May 14, 2013#1220 Originally Posted by
thefalls ↑ Has anyone tested this manifold "Tooter" on a boosted motor ?
Thanks.
No. The only boosted ones I've ever seen were guys in Puerto Rico who had the original idea.
Picture not included in this copy There's one pic of another one, but I haven't been able to find it yet. I think it would shine in a forced induction setup because it can handle pressure and has a higher flow capacity. That would shift the power limiting factor to how much flow the head could handle.
tooterThread starterLos Angeles · May 14, 2013#1221Found an example of the next idea I'd like to try...
Picture not included in this copy
...a manifold with no plenum. 🙂
JustDidItUnited States · May 14, 2013#1222 Originally Posted by
tooter ↑ Found an example of the next idea I'd like to try...
Picture not included in this copy
...a manifold with no plenum. 🙂
Will you use individual velocity stacks for each runner?
kounj · May 14, 2013#1223If you need someone to test it in a forced induction setup send one my way for a couple of weeks.
tooterThread starterLos Angeles · May 14, 2013#1224 Originally Posted by
kou ↑ If you need someone to test it in a forced induction setup send one my way for a couple of weeks.
Thanks for the offer, kou... 🙂 but I only have one left and its already up for sale.
By the way, I found pics of the only others I know of.
normally aspirated...
Picture not included in this copy ...and forced induction.
Picture not included in this copy I bet that turbo setup is a real screamer. 🙂
tooterThread starterLos Angeles · May 14, 2013#1225 Originally Posted by
JustDidIt ↑ Will you use individual velocity stacks for each runner?
I'm just rounding and smoothing the openings that are already on the manifold like the one on the upper right.
Picture not included in this copy The exit of the main intake tube that feeds the four runners is a bellmouth profile rounded to 180 degrees. I'll be cutting a hole in the hemisphere when I determine the right angle for the throttle body to set. The round base of the plenum has an advantage in that it can be rotated to generate just the right attitude for the throttle body to set. Then when that has been determined, the position can be indexed and the sphere can be welded into place.
Picture not included in this copy JustDidItUnited States · May 14, 2013#1226👍 Cool Stuff!
Flipper_1938Kentucky · May 16, 2013#1227How are you going to put the square peg in the round hole?
3cyltrboOttawa · May 16, 2013#1228Tooter
Thanks for your replies
Just so I understand (I'm slow)
You have a tooter instock that is made to accept the 1zz and its $450 shipped?
Thanks
Will
JustDidItUnited States · May 16, 2013#1229tooterThread starterLos Angeles · May 16, 2013#1230 Originally Posted by
3cyltrbo ↑ Tooter
Thanks for your replies
Just so I understand (I'm slow)
You have a tooter instock that is made to accept the 1zz and its $450 shipped?
Thanks
Will
Yes I do, Will. 🙂
This is the picture of the actual 1ZZ ready tooter manifold that's in stock for sale.
Picture not included in this copy It's $495 on ebay only because of the added fees. From me directly, it's $450 including shipping.
Greg
greggabi@verizon.net 310-455-3340
tooterThread starterLos Angeles · May 16, 2013#1231 Originally Posted by
Flipper_1938 ↑ How are you going to put the square peg in the round hole?
Only the round half goes into the round hole and is inside the plenum...
Picture not included in this copy The square half sits on top of the hole on the outside of the plenum like the head of a rivet so as to hold the 1ZZ throttle body. The corners overhang on purpose so that it doesn't just fall through all the way. This will make welding really easy as it will rest exactly where it's supposed to be. 👍
Flipper_1938Kentucky · May 17, 2013#1232 Originally Posted by
tooter ↑ Only the round half goes into the round hole and is inside the plenum...
Picture not included in this copy
The square half sits on top of the hole on the outside of the plenum like the head of a rivet so as to hold the 1ZZ throttle body. The corners overhang on purpose so that it doesn't just fall through all the way. This will make welding really easy as it will rest exactly where it's supposed to be. 👍
Actually I was wondering about the "boob" to factory square intake flange.
tooterThread starterLos Angeles · May 17, 2013#1233 Originally Posted by
Flipper_1938 ↑ Actually I was wondering about the "boob" to factory square intake flange.
I'm getting a round piece of aluminum plate and cutting a rounded square hole in it. The diameter of the plate will be slightly larger than the hemisphere so that it can sit on top of it, while the square hole will be slightly smaller than the factory runner retention flange to allow the plate to set on top of it.
Picture not included in this copy After the welding, everything gets stainless steel bead blasted for a clean consistent uniform finish. 👍
47_MasoN_47Northwest Alabama · May 17, 2013#1234Wow, I hadn't checked on this thread in a while so I missed about 50 pages.
So, with this I could snag a 1zz tb and one of your adapters and be able to rock the 1zz on my Blitz setup?
How far do you think this would offset the intake? I've got an AFe and there's not a lot of extra room there.
3cyltrboOttawa · May 17, 2013#1235 Originally Posted by
tooter ↑ Yes I do, Will. 🙂
This is the picture of the actual 1ZZ ready tooter manifold that's in stock for sale.
It's $495 on ebay only because of the added fees. From me directly, it's $450 including shipping.
Greg
greggabi@verizon.net 310-455-3340
Other than a 1ZZ TB which I have already, what else would I need that might not be included?
tooterThread starterLos Angeles · May 17, 2013#1236 Originally Posted by
47_MasoN_47 ↑ Wow, I hadn't checked on this thread in a while so I missed about 50 pages.
So, with this I could snag a 1zz tb and one of your adapters and be able to rock the 1zz on my Blitz setup?
How far do you think this would offset the intake? I've got an AFe and there's not a lot of extra room there.
It wouldn't offset it at all if the thickness of the adaptor matches what you cut off of the Blitz.
Picture not included in this copy There's plenty of material to work with on the bottom round section. In fact if thickness became an issue, you could simply cut off the whole round section with a hack saw, and just use the square throttle body base part. You would want to flare out the smaller runner opening with a grinder for a smooth transition to the larger 55mm adaptor bore.
47_MasoN_47Northwest Alabama · May 17, 2013#1237Oh I didn't realise that stuff had to be chopped off the Blitz part. Blarg, probably beyond what I'm willing to try haha.
tooterThread starterLos Angeles · May 17, 2013#1238 Originally Posted by
3cyltrbo ↑ Other than a 1ZZ TB which I have already, what else would I need that might not be included?
Nothing. 🙂
The tooter uses all of your stock manifold bolts and throttle body studs. It comes with a OEM Yaris O ring manifold-to-head gasket, a OEM Corolla flat gasket between the throttle body and the tooter, and an OEM Corolla O ring gasket between the throttle body and the adaptor. All of the hoses will need some rerouting because everything is shifted to different locations. I ran some of the tubes under the throttle body for a cleaner appearance.
Picture not included in this copy tooterThread starterLos Angeles · May 17, 2013#1239 Originally Posted by
47_MasoN_47 ↑ Oh I didn't realise that stuff had to be chopped off the Blitz part. Blarg, probably beyond what I'm willing to try haha.
Yeah... you'd need to want a 1ZZ on your Blitz really badly! 😆
There's no other way to retain the same location of your intake without cutting and welding. And it would be a pain, because you'd need to remove the unit to cut it and take to to a welder. It would definitely an advanced project, but not a difficult one as aluminum is really soft and cuts and welds easily. One day someone with the mechanical skills will try a SC 1ZZ. I bet it would be an effing screamer because even running normally aspirated, the throttle response is truly amazing.
3cyltrboOttawa · May 22, 2013#1240PM'd
Cheers
Will
CrankyOldManWest Michigan · May 22, 2013#1241 Originally Posted by
tooter ↑ Yeah... you'd need to want a 1ZZ on your Blitz really badly! 😆
There's no other way to retain the same location of your intake without cutting and welding. And it would be a pain, because you'd need to remove the unit to cut it and take to to a welder. It would definitely an advanced project, but not a difficult one as aluminum is really soft and cuts and welds easily. One day someone with the mechanical skills will try a SC 1ZZ. I bet it would be an effing screamer because even running normally aspirated, the throttle response is truly amazing.
This is on my to-do list once I get my A/F monitoring under control. I just got a set of 255 cc injectors and a scangauge II this morning and an injen CAI last week.
tooterThread starterLos Angeles · May 22, 2013#1242 Originally Posted by
3cyltrbo ↑ PM'd
Cheers
Will
Enjoy your tooter, Will.
Arrives on the 30th. 🙂
Greg
tooterThread starterLos Angeles · May 22, 2013#1243 Originally Posted by
CrankyOldMan ↑ This is on my to-do list once I get my A/F monitoring under control. I just got a set of 255 cc injectors and a scangauge II this morning and an injen CAI last week.
I
really like those big shiny aluminum tube Injen intakes. 👍
I've been looking at this one for the truck as it's the only 4 cylinder one available. I think cold air is an overblown issue. My short ram intake has the same underhood engine/filter relationship and it runs great. When a vehicle is moving, ambient temperature air is blasting through the engine compartment.
Picture not included in this copy This intake enjoys an advantage... if I start messing with the manifold, it's free to move around. 😉
tooterThread starterLos Angeles · May 22, 2013#1244Still watching TBR's auction of a Golden Eagle manifold on ebay. Curious to see if there will be any bids.
Picture not included in this copy
It's up for a $399 reserve auction with a $699 buy it now.
The reserve is probably $698! 😆
cali yarisCanoga Park, CA · May 22, 2013#1245^ Probably! Ooh... plus $35 shipping.
Injen intake for your truck would be $219.95 through us, by the way.
Part # INJ-PF2011
cali yarisCanoga Park, CA · May 22, 2013#1246LOL. Let's take a badly designed WeaponR product and put more holes in it. Yeah, ok.
CrankyOldManWest Michigan · May 22, 2013#1247 Originally Posted by
tooter ↑ I really like those big shiny aluminum tube Injen intakes.
Sadly, this one is black. There's some dimples in it from rubbing against the bodywork, so I may just lop off the end and make it an SRI a la Tooter.
I still feel compelled to buy one of these things, but the wife isn't really interested in performance mods. Convincing her to put a $450 part under the hood where "nobody" would ever see it would be a really hard sell. Perhaps I could bill it as a cosmetic upgrade? It would have to be purple though...
bladesmith6PA · May 22, 2013#1248I am tempted to bid for that price just to see what happens.. I'd rather buy from Garm but just can't pull the trigger for full price, I'm stuck in the 80's when manifolds were cheap.....
tooterThread starterLos Angeles · May 22, 2013#1249 Originally Posted by TOLMACH ↑
Wow... that one's only $199 and no reserve. 😲
Picture not included in this copy It looks similar to this design except that throttle body tips down and this one tips up.
Picture not included in this copy back side view...
Picture not included in this copy Mine had welding blobs in the runners like those except less of them because I found a really good old school welder who really knows his stuff. I use a Dremel to grind off the weld intrusions and to smooth out the runner transitions.
Ask for Bill... 👍
Ajax Welding and Sandblasting
7933 Gloria Avenue
Van Nuys, CA 91406
818-781-5667
ViperoniBrampton, ON · May 22, 2013#1250