mines going in soon im pumped!
NST (NonStopTuning) Pulleys. Info, Specs, User Data...
634 posts · 271,668 views · page 9 of 13
Replies continued
Installed mine a few weeks ago, certainly can feel a bit more response on the lower end (went with the underdrive pulley). Noticed a bit better fuel mileage than before, not a drastic change or anything of the like, but anything is appreciated!
Got my set installed Friday...Definetly a nice improvement...Iam also seeing better gas mileage. Engine is just as smooth as before if not better....
As far as the performance. Well my heavy ass 17" wheels are kind of killing that..LMAO..
As far as the performance. Well my heavy ass 17" wheels are kind of killing that..LMAO..
i was just hoping it could be noted somewhere that a new belt is req'd if you don't have a/cI'll note this for my store - Do you know the part number of the shorter belt that worked?
i just finished putting mine in its sweet thanks micro image again for being great
I ordered one from garm last week, its coming in a couple of hours. I killed some time by getting off the stock crank pulley manually with no impact wrench and well....I must be the strongest guy on YW cause that has got to be the easiest thing I've done on my car. I literally did it while lying on my back...ha! All the bolts were super easy for me to get off, that or my car didnt come out of the factory with the bolts torqued properly, lol. First time I've really been excited to see the weird UPS delivery guy. I'll post pix soon!
EDIT:
4 hours later ups arrives...then install! I havent gone to bed yet so I was too tire for pix, sorry. Anyways heres what happened when I first got in the car...
First thing I noticed was the idle was almost unoticeable. It felt as if my car wasnt even running. Definitely a lot quieter too, it was scary at first haha. Throttle is more responsive, the shifts are so clean and smooth in my auto. Power increase within the mid range, hrm...need to drive more tomorrow to see more...hehe.
Thanks NST, garm, and chinocharles' diy.
EDIT:
4 hours later ups arrives...then install! I havent gone to bed yet so I was too tire for pix, sorry. Anyways heres what happened when I first got in the car...
First thing I noticed was the idle was almost unoticeable. It felt as if my car wasnt even running. Definitely a lot quieter too, it was scary at first haha. Throttle is more responsive, the shifts are so clean and smooth in my auto. Power increase within the mid range, hrm...need to drive more tomorrow to see more...hehe.
Thanks NST, garm, and chinocharles' diy.
Originally Posted by NonStopTuning ↑I'm not quite sure what type of comment would be warranted here.
Unfortunately we have never tested with any Yaris that did not have a/c. And as far as I can tell, you are our first ever customer to use one of these pulleys on a Yaris that has no a/c.
Based on past experiences with other cars I can see how you may need a slightly shorter belt with your setup and it sounds like you have found your solution.
Buying a new belt is a small price to pay in exchange for picking up a few extra ponies 👍
Any other owners out there running around with no a/c, please feel free to comment.
👍
Please check your PM.
So did anyone see any HP gains with just the light crank pulley (not underdriven), and the OEM WP and Alt pulleys?
Thanks!
Thanks!
sorry to bore here again... but I've not understood if this pulley will fit on new 09 yaris too (model 2009, 1.33 dual VVTi)
someone is able to give me a definitive response?? thx
regards,
davide
someone is able to give me a definitive response?? thx
regards,
davide
Originally Posted by schleppy ↑So did anyone see any HP gains with just the light crank pulley (not underdriven), and the OEM WP and Alt pulleys?
Thanks!
Really, the lite pulley frees up HP from the crank that would otherwise be wasted moving a considerably heavier pulley. Seriously, you could use the stock pulley as a boat anchor (albeit on a very small personal boat, but still you get the idea.) Also a plus on the automatic is it helps resolve "gear hunting" up hills. 👍
I have JUST the light crank pulley and it made a world of a difference. I had the battery disconnected while I was working on the pulley and some electrical stuff so I guess it took the ECU a couple of day to 'learn' the new revs. Theres a definite increase in power all throughout the power range. I could only imagine the addition of the WP and ALT will increase power even more. Honestly just the difference you feel at idle and shifting is worth it, I just consider the HP a cool bonus. 👍Originally Posted by schleppy ↑So did anyone see any HP gains with just the light crank pulley (not underdriven), and the OEM WP and Alt pulleys?
Thanks!
The stock pulley is way heavier than the NST one. I was playing with the stock one earlier today and dropped it on my foot...OW..😠.Originally Posted by Astroman ↑Really, the lite pulley frees up HP from the crank that would otherwise be wasted moving a considerably heavier pulley. Seriously, you could use the stock pulley as a boat anchor (albeit on a very small personal boat, but still you get the idea.) Also a plus on the automatic is it helps resolve "gear hunting" up hills. 👍
I did notice on my auto sedan when going up a hill it didnt do that stupid gear hunting 👍.
hey, i was thinkin about underdriving but it's seriously not suggested for my camaro as a daily driver. i was wondering what you would say as a economical standpoint on the underdrive. i'm worried about longevity over power...i have a 500hp camaro for power...
any way, i'm going with the alt and wp pullies as well, but dont know about underdriving.
any way, PM or reply here pls.
any way, i'm going with the alt and wp pullies as well, but dont know about underdriving.
any way, PM or reply here pls.
i'm confused here, some are stating smoother idling, and someone in a thread even reported it being dead-quiet..but others are stating rough idles...my guess is the belt tension, but I'm just curious what's up
Well after putting them on a chain and wearing them like "bling" for a few weeks, my complete underdrive pulley set was installed today !! Now when I take off from a dead stop I have "Zing" !! There is definitely a difference with initial "launching" and in throttle response when I shift between gears.
Second, I can't believe the difference in pulley weights. When I put a factory pulley in one hand, and a NST "RED" in the other, the weight difference was so significant that you could "guess" that the NST pulley "felt" 40-50 percent lighter. Don't know exact specs, but I do know it's amazing how much lighter they are !!
SHOUT OUT TO MIKE NACARATO 👏
Went to his house this morning and he had my complete set installed in 90 minutes. He's got all the tools, know how, and passion for what he's doin'. I got to ask questions and torque the water pump pulley while he loosened it! This is what Yarisworld should be about. Fellow members helping each other out for the common coolness of cars!! This just got me more excited for the Import Alliance gathering in July.
ONCE AGAIN, THANKS MIKE !! 🙇
Second, I can't believe the difference in pulley weights. When I put a factory pulley in one hand, and a NST "RED" in the other, the weight difference was so significant that you could "guess" that the NST pulley "felt" 40-50 percent lighter. Don't know exact specs, but I do know it's amazing how much lighter they are !!
SHOUT OUT TO MIKE NACARATO 👏
Went to his house this morning and he had my complete set installed in 90 minutes. He's got all the tools, know how, and passion for what he's doin'. I got to ask questions and torque the water pump pulley while he loosened it! This is what Yarisworld should be about. Fellow members helping each other out for the common coolness of cars!! This just got me more excited for the Import Alliance gathering in July.
ONCE AGAIN, THANKS MIKE !! 🙇
glad you like it randy and im happy to help. just hope nothing falls apart ;) jk lol
does the lite set work for the 1.3 2SZ-FE?
Nice! I'm glad to hear this also helped resolve your "gear hunting". 🎉Originally Posted by eii ↑I did notice on my auto sedan when going up a hill it didnt do that stupid gear hunting 👍.
Hi NST pulley users, I would like to know if you guys have this sign of wear and tear on your WP-lite pulley?
Picture not included in this copy
Picture not included in this copy
Sorry to have to be the first with a negative comment, but the I got the underdrive pulley and seriously.....it's not really like everyone says. It's not what it's all hyped up to be. It does however help when I'm on the freeway doing a downhill pull but the the pulley doesn't do much until 4-5k when your almost out of run to do it.
Underdrive pulley does have negative effect on AC. it's the only thing I noticed after installing it. Ac isn't as cold as it used to be but it's something I figured would happen. I'm pretty sure though this lightened pulley will open up horse power for later boost applications though.
Not trying to bash NST or anything btw. I have their SSK and it's frikken sweet! but I just don't think the pulleys are what everyone on the forums hype it up to be.
Underdrive pulley does have negative effect on AC. it's the only thing I noticed after installing it. Ac isn't as cold as it used to be but it's something I figured would happen. I'm pretty sure though this lightened pulley will open up horse power for later boost applications though.
Not trying to bash NST or anything btw. I have their SSK and it's frikken sweet! but I just don't think the pulleys are what everyone on the forums hype it up to be.
Originally Posted by d1nzfe ↑Hi NST pulley users, I would like to know if you guys have this sign of wear and tear on your WP-lite pulley?
Picture not included in this copy
This is typical and happens with all pulleys over time. Nothing to be concerned with, or worry about.
Good luck and have fun with all your projects!
does this mean we have to change it just like the stock one?]Originally Posted by NonStopTuning ↑This is typical and happens with all pulleys over time. Nothing to be concerned with, or worry about.
Good luck and have fun with all your projects!
anyone have issue with a worn one??
Nothing to be concerned with, or worry about.Originally Posted by d1nzfe ↑does this mean we have to change it just like the stock one?]
anyone have issue with a worn one??
👍
I just have something to ask all the guys that have installed the NST pulleys. I am currently driving a sedan auto. Will installing either underdrive pulley or the lite pulley effect the top speed of my car? I know that it will help in the early pick up but what about the top speed?
Good question.Originally Posted by jmunchar ↑I just have something to ask all the guys that have installed the NST pulleys. I am currently driving a sedan auto. Will installing either underdrive pulley or the lite pulley effect the top speed of my car? I know that it will help in the early pick up but what about the top speed?
NST Pulleys do not change the top speed of your Yaris, but they will allow your engine to rev up to speed more quickly, thus reaching your top speed more quickly and with less effort.
NST Pulleys lead to better throttle response, better hp and tq delivery, quicker acceleration, and better fuel economy.
NST PULLEY OWNERS, please feel free to chime in. We would greatly appreciate it!
ok, i'll ask again since noone wants to answer in a week or two...and a PM box is still full.
hey, i was thinkin about underdriving but it's seriously not suggested for my camaro as a daily driver. i was wondering what you would say as a economical standpoint on the underdrive. i'm worried about longevity over power...i have a 500hp camaro for power...i'd rather keep my alt n wp in tact as well as AC. plus i dont want any flickering lights.
any way, i'm going with the alt and wp pullies as well, but dont know about underdriving.
any way, PM or reply here pls.
so anyone with any long-life problems underdriving other than a weak AC? like, lights flickering or low charge on battery...overheating engine or higher temps???
hey, i was thinkin about underdriving but it's seriously not suggested for my camaro as a daily driver. i was wondering what you would say as a economical standpoint on the underdrive. i'm worried about longevity over power...i have a 500hp camaro for power...i'd rather keep my alt n wp in tact as well as AC. plus i dont want any flickering lights.
any way, i'm going with the alt and wp pullies as well, but dont know about underdriving.
any way, PM or reply here pls.
so anyone with any long-life problems underdriving other than a weak AC? like, lights flickering or low charge on battery...overheating engine or higher temps???
First, thank you for your interest in our site and products, we appreciate it.Originally Posted by severous01 ↑ok, i'll ask again since noone wants to answer in a week or two...and a PM box is still full.
hey, i was thinkin about underdriving but it's seriously not suggested for my camaro as a daily driver. i was wondering what you would say as a economical standpoint on the underdrive. i'm worried about longevity over power...i have a 500hp camaro for power...i'd rather keep my alt n wp in tact as well as AC. plus i dont want any flickering lights.
any way, i'm going with the alt and wp pullies as well, but dont know about underdriving.
any way, PM or reply here pls.
so anyone with any long-life problems underdriving other than a weak AC? like, lights flickering or low charge on battery...overheating engine or higher temps???
Second, then answers to all your questions are here in this thread.
So I will try to give you the short version here...
1. Underdriving on certain applications is not recommended. Furthermore, the older, more traditional pulley kits out there used to underdrive the accessories by a very large amount... ie. 40%-50%. Especially on muscle cars, where the majority of owners were thought to be purchasing such kits for RACE applications, not street. Even the majority of the older kits that were made to cater to Japanese imports were built this way.
2. NST stepped into the picture in 2005 with the understanding that the majority of our customers who are modifying small imports these days, are doing so with their daily driven cars. Our Underdrive Crank Pulley for the Yaris underdrives the accessories by only 10%. NOT enough to cause any premature problems with any of the accessories, but enough to provide a few extra ponies to drive the wheels.
Again, MUCH of this info, and a whole lot more, is provided throughout this thread.
Furthermore, we have THOUSANDS of happy customers on the following forums...
www.YarisWorld.com
www.ScionLife.com
www.8thCivic.com
www.Club4AG.com
www.MicroImageOnline.com
www.86Garage.com
etc etc etc
THOUSANDS of user reviews when it comes to NST Pulleys, 99.99999% of them positive.
The horror stories that applied to our grandfathers' pulley kits do not apply to NST pulleys.
Not all pulleys are created equal, and NO OTHER pulley is an NST pulley.
Good luck and have fun with all your projects!
I read on this thread that installing the pulleys your a\c will not work as good. How much of a difference will i notice.
i didnt notice any difference. pulleys have been on for a few months now with nothing but good results. i also have the underdrive set and a system installed in the car and have never once had any slight electrical issue with it being underdriven.
dont think....just do....do nst pulleys today!
dont think....just do....do nst pulleys today!
Just wondering; If these parts provide so many benefits, why does'nt Toyota install them in the factory from the get go??
ask them
There are SEVERAL reasons, with one major reason being cost.Originally Posted by auxmike ↑Just wondering; If these parts provide so many benefits, why does'nt Toyota install them in the factory from the get go??
Toyota also does not offer high performance camshafts, exhaust systems, suspensions, turbo or supercharger kits, etc.
Just because Toyota does not offer these pulleys does not mean that you should shy away from them.
25+ pages of positive results here on your forums alone, hundreds more pages, with thousands more positive reviews on other forums.
Good luck and have fun with all your projects 👍
Thank you sir.Originally Posted by mikenacarato ↑i didnt notice any difference. pulleys have been on for a few months now with nothing but good results. i also have the underdrive set and a system installed in the car and have never once had any slight electrical issue with it being underdriven.
dont think....just do....do nst pulleys today!
Thanks MIKE@NST!👍
Hey Mike I finally got to order one of the underdrive pullies! I can't wait for it to come in! Sorry I didn't order from you 🙁 your site said that you were out of stock. So im getting it through Garm but oh well I'm still getting one!!! 😁😁 Can't wait to seeyou guys on the 15th. 😳
McDonalds has thousands of happy customers too, but does it mean your eating healthy LOL. 😁
I believe the reason why they are not fitted at the OEM level has to do with harmonic vibration control, something a solid pully does not do as well. The Society of Automotive engineers has some good papers on this subject. Correct me if I'm wrong but I'm not aware of one O.E.M manufacturer using a solid aluminium crank pully. With car companies under pressure to meet Corporate average fuel economy requirements, if all the benefits out weighed the negatives you would see them on all cars.
Now if your willing to accept some negatives like the ones mentioned by others, the car will pull noticably harder with a underdrive pulley, It feels rev happy. On other applications I have used underdrive pulleys for over 50,000 miles with no engine failures. Just like any performance mod, there is always some offs.
I believe the reason why they are not fitted at the OEM level has to do with harmonic vibration control, something a solid pully does not do as well. The Society of Automotive engineers has some good papers on this subject. Correct me if I'm wrong but I'm not aware of one O.E.M manufacturer using a solid aluminium crank pully. With car companies under pressure to meet Corporate average fuel economy requirements, if all the benefits out weighed the negatives you would see them on all cars.
Now if your willing to accept some negatives like the ones mentioned by others, the car will pull noticably harder with a underdrive pulley, It feels rev happy. On other applications I have used underdrive pulleys for over 50,000 miles with no engine failures. Just like any performance mod, there is always some offs.
Originally Posted by NonStopTuning ↑First, thank you for your interest in our site and products, we appreciate it.
Second, then answers to all your questions are here in this thread.
So I will try to give you the short version here...
1. Underdriving on certain applications is not recommended. Furthermore, the older, more traditional pulley kits out there used to underdrive the accessories by a very large amount... ie. 40%-50%. Especially on muscle cars, where the majority of owners were thought to be purchasing such kits for RACE applications, not street. Even the majority of the older kits that were made to cater to Japanese imports were built this way.
2. NST stepped into the picture in 2005 with the understanding that the majority of our customers who are modifying small imports these days, are doing so with their daily driven cars. Our Underdrive Crank Pulley for the Yaris underdrives the accessories by only 10%. NOT enough to cause any premature problems with any of the accessories, but enough to provide a few extra ponies to drive the wheels.
Again, MUCH of this info, and a whole lot more, is provided throughout this thread.
Furthermore, we have THOUSANDS of happy customers on the following forums...
www.YarisWorld.com
www.ScionLife.com
www.8thCivic.com
www.Club4AG.com
www.MicroImageOnline.com
www.86Garage.com
etc etc etc
THOUSANDS of user reviews when it comes to NST Pulleys, 99.99999% of them positive.
The horror stories that applied to our grandfathers' pulley kits do not apply to NST pulleys.
Not all pulleys are created equal, and NO OTHER pulley is an NST pulley.
Good luck and have fun with all your projects!
Glad you got one. And MicroImage is an excellent place to order any NST products.Originally Posted by lilredrocket ↑Hey Mike I finally got to order one of the underdrive pullies! I can't wait for it to come in! Sorry I didn't order from you 🙁 your site said that you were out of stock. So im getting it through Garm but oh well I'm still getting one!!! 😁😁 Can't wait to seeyou guys on the 15th. 😳
I look forward to reading your review after your install 😁
To dallas - you can decide to get it or not, its up to you, but when Mike says we have positive feedback on the pulleys (all 3), he means it. There is a member on here w/ NST pulleys on his Yaris sedan, and he has over 330k miles on his car...Has he reported a problem on his Yaris in terms of the pulleys failing on him after all those miles? NO
Here is the thread of the member, plus his video w/ exhaust, header, intake, AND under-drive pulleys..Alternator intermittently charging after 323,000 miles.
So please take it into consideration what Mike has to say about his products. He isnt sounding conceited either~
I'm one of the few worried members putting on aftermarket parts on the car, as I pay for everything myself, and i dont need any additional expenses coming my way in this horrific economy....
In todays times, the only real statistics that hold up are those of actual peoples w/ the product....not paper printing out data~
Here is the thread of the member, plus his video w/ exhaust, header, intake, AND under-drive pulleys..Alternator intermittently charging after 323,000 miles.
So please take it into consideration what Mike has to say about his products. He isnt sounding conceited either~
I'm one of the few worried members putting on aftermarket parts on the car, as I pay for everything myself, and i dont need any additional expenses coming my way in this horrific economy....
In todays times, the only real statistics that hold up are those of actual peoples w/ the product....not paper printing out data~
Thank you 👍Originally Posted by Kioshi ↑To dallas - you can decide to get it or not, its up to you, but when Mike says we have positive feedback on the pulleys (all 3), he means it. There is a member on here w/ NST pulleys on his Yaris sedan, and he has over 330k miles on his car...Has he reported a problem on his Yaris in terms of the pulleys failing on him after all those miles? NO
Here is the thread of the member, plus his video w/ exhaust, header, intake, AND under-drive pulleys..Alternator intermittently charging after 323,000 miles.
So please take it into consideration what Mike has to say about his products. He isnt sounding conceited either~
I'm one of the few worried members putting on aftermarket parts on the car, as I pay for everything myself, and i dont need any additional expenses coming my way in this horrific economy....
In todays times, the only real statistics that hold up are those of actual peoples w/ the product....not paper printing out data~
Looks like Garm was out of the underdrive too! So I'm going to have to wait a week to get it. Oh well. I'm still really excited to be getting one FINALLY!!!
All NST Pulleys are now back in stock and ready for shipping.
Excellent sources from which to order...
www.NonStopTuning.com
www.MicroImageOnline.com
Come and get 'em folks!!!
Excellent sources from which to order...
www.NonStopTuning.com
www.MicroImageOnline.com
Come and get 'em folks!!!
Anyone else?!
I have over 40k miles on my lite crank pulley, and 30k miles on the WP and ALT pulleys. STILL working as advertised! 👍
do they void the warranty?
No, unless toyota can prove that the part has caused the malfunction, or you damage something when you do the install (had a professional mechanic friend do my install.) I'm well past the factory warranty, but when I was I had warranty and non-warranty work done and they never said anything. To date there hasn't been a single malfunction in any yaris with NST pulleys.
You will get increased engine response, weight reduction, mpg increase of about 1-3mpg, insane decrease in the auto with "gear hunting", awesome customer service, and better 1/4 mile times.
This has been my experience anyway.
You will get increased engine response, weight reduction, mpg increase of about 1-3mpg, insane decrease in the auto with "gear hunting", awesome customer service, and better 1/4 mile times.
This has been my experience anyway.
thanks.. maybe i'll put this on my to-buy list :)Originally Posted by Astroman ↑No, unless toyota can prove that the part has caused the malfunction, or you damage something when you do the install (had a professional mechanic friend do my install.) I'm well past the factory warranty, but when I was I had warranty and non-warranty work done and they never said anything. To date there hasn't been a single malfunction in any yaris with NST pulleys.
You will get increased engine response, weight reduction, mpg increase of about 1-3mpg, insane decrease in the auto with "gear hunting", awesome customer service, and better 1/4 mile times.
This has been my experience anyway.
i dont race my yaris.. but it would be nice to have a little more throttle response coming through tolls and on to the hwy at times.
i'll give it some thought :)
ya but it's a toyota what do u need the warranty for?Originally Posted by TinyGiant ↑do they void the warranty?
just playing devils advocate for a sec here.
i'm not getting any power mods to my yaris. i won't even add an intake or a muffler... I'm happy with stock. 😛
so far the tanabe axel back is the only engine-ish mod i've doneOriginally Posted by wholenizz ↑ya but it's a toyota what do u need the warranty for?
just playing devils advocate for a sec here.
i'm not getting any power mods to my yaris. i won't even add an intake or a muffler... I'm happy with stock. 😛
i saw it :)Originally Posted by camelll ↑tiny I am selling a brand new red anodized crank pulley. It is the lite series not the under drive pulley. $85 dollars shipped. CLICK ME FOR THREAD.
lol there isnt much that goes on here that i dont see.. im a "new posts" obsessive checker :)
right now i'm low on funds but in the future i might pick the set up :)
We'll be here when you're ready!
i installed my pullies last saturday and i feel the diferences at low rpm`s in any gear ..
ít´s more easy to recovery the car .. thanks nst
ít´s more easy to recovery the car .. thanks nst