Yarisworld Archive

NST (NonStopTuning) Pulleys. Info, Specs, User Data...

634 posts · 271,668 views · page 13 of 13

Replies continued

fmicleSan Jose, CA, USA · Feb 22, 2011#601
If I remember correctly, NST is not an official vendor on YW anymore, so you'll have to try to go directly to their website and contact them through that...

Most people have had very positive experiences with NST, Mike has been very patient explaining things, emailing additional instructions, etc...
sitoSingapore · Feb 23, 2011#602
Originally Posted by fmicle ↑
If I remember correctly, NST is not an official vendor on YW anymore, so you'll have to try to go directly to their website and contact them through that...

Most people have had very positive experiences with NST, Mike has been very patient explaining things, emailing additional instructions, etc...
Hi fmicle,

The last email i received was 5 months ago. NST told me that my pulley was replaced and will deliver it back to me soon.

And during these 5 months, i keep on waiting. Nothing was delivered and I sent tons of emails to their official website asking them where is it and there's no reply from them... 😠
skootdogBaton Rouge,La · Apr 3, 2011#603
Does it affect the timing of the engine?
goliath1812Ocala Florida · Apr 3, 2011#604
Originally Posted by sito ↑
Hi fmicle,

The last email i received was 5 months ago. NST told me that my pulley was replaced and will deliver it back to me soon.

And during these 5 months, i keep on waiting. Nothing was delivered and I sent tons of emails to their official website asking them where is it and there's no reply from them... 😠

Have you tried contacting Mike through AIM? He used to be online all the time..
yaris2010RSAngus, Ontario · Apr 4, 2011#605
Originally Posted by skootdog ↑
Does it affect the timing of the engine?
no, its on the accessory belt not timing chain
sitoSingapore · Apr 5, 2011#606
Originally Posted by goliath1812 ↑
Have you tried contacting Mike through AIM? He used to be online all the time..
I don't know his AIM id. Anyone knows? I would appreciate if anyone in Yarisworld can contact him for me.. All i need is just an email from him.. I need to know what happen to my pulley.. There's no reply from him for 8 months....🙁
cali yarisCanoga Park, CA · Apr 5, 2011#607
And during these 5 months, i keep on waiting. Nothing was delivered and I sent tons of emails to their official website asking them where is it and there's no reply from them...
This is a great reason to buy through a reseller who will take care of you when problems arise. 🙂
sitoSingapore · Apr 6, 2011#608
Originally Posted by cali yaris ↑
This is a great reason to buy through a reseller who will take care of you when problems arise. 🙂
I thought since they are the official wholesaler, nothing will go wrong. But i was wrong. If this is their way of doing business, ignoring internet users like us, i guess there is nothing we can do. Perhaps i can lodge a complaint against them using legal means, since i got the full emails of our conversation and receipts of my local courier.
goliath1812Ocala Florida · Apr 6, 2011#609
Originally Posted by sito ↑
I don't know his AIM id. Anyone knows? I would appreciate if anyone in Yarisworld can contact him for me.. All i need is just an email from him.. I need to know what happen to my pulley.. There's no reply from him for 8 months....🙁
nstonaim is his AIM username. I haven't been on in quite a while, so I don't know if he's ever there anymore or not. You can give it a try though.
VanquisherSingapore · Apr 17, 2011#610
Originally Posted by cali yaris ↑
This is a great reason to buy through a reseller who will take care of you when problems arise. 🙂
Agreed!
tk-421Dagobah · Apr 17, 2011#611
Originally Posted by cali yaris ↑
This is a great reason to buy through a YarisWorld-verified reseller with the strength and awesomeness of a thousand men who will take care of you when problems arise. 🙂
FTFY 😁
NonStopTuningThread starterUSA · Dec 4, 2013#612
Picture not included in this copy

Long time no see YW!

As many of you know, and have on your cars, we set up design and development on Yaris pulleys back in 2007 and ran the original GB here:

NEW GROUP BUY: Yaris NST Crank Pulley (NonStopTuning)

Unfortunately, due to lack of demand and slow market conditions, we had to stop mass production on our Yaris pulleys and make them available only as special order items, a couple years ago.

We are considering a Dec/Jan group buy on a run of crank pulleys, at a discounted group buy price, if the community is interested.

All pulleys would be the same lightweight aluminum we've always used and a special run of colors would be made available: red, blue, black, gold, purple.

Would you guys and girls be interested in such an offer?
47_MasoN_47Northwest Alabama · Dec 4, 2013#613
You just missed me, I just bought a complete set a couple days ago from CTScott.
JerkrattFair Lawn, NJ · Dec 4, 2013#614
Mike I've been trying to get in touch with NST. I'll message you
cali yarisCanoga Park, CA · Dec 4, 2013#615
Mike, have you made any substantial changes to your designs? There are quite a few broken NST pulleys (crank and water pump) out there now with the old design.

Maybe start here: Very unhappy customer (NST pulleys).

with some customer service. 🙄
LarsGermany · Dec 5, 2013#616
Originally Posted by NonStopTuning ↑
Would you guys and girls be interested in such an offer?
Any chance I can get'em in Germany without crazy shipping prices? 😛
ilikericesavannah, ga · Dec 5, 2013#617
my water pump pully has a really DEEP groove worn into the pulley from the belt. Is there maybe a exchange that could be done with broken or worn pulleys?
NonStopTuningThread starterUSA · Dec 5, 2013#618
Every NST pulley has always come with a one year warranty. Out of thousands of pulleys we've sold, a few have had issues and those few have been replaced. We have tried to work with those outside the warranty periods as well. No one has ever been told, "sorry, you're out of luck" when the proper steps have been taken. Warranty claims and questions are best handled, and a mutual solution for both parties is always best reached, via one-on-one communication through email, not through internet forum posts.

I encourage customers with issues to please email us. Trying to hurt our reputation/sales on the forums only makes matters worse and makes it more difficult for us to try to assist you.

Our design on our crank pulleys and water pump pulleys has changed slightly. Our new pulleys have holes in them, rather than slots. Holes seem to hold up slightly better in the long run, though there is not a huge amount of difference. There are thousands of NST customers running pulleys with slots in them since 2005. Are there a few cases where pulleys have cracked? Yes. Are there thousands of other very happy customers? Absolutely.

If we move forward and the community wants to support our products, we would be happy to offer a group buy discount and move forward with this idea. If not, we will continue to offer pulleys on a special order basis, as we have over the past few years.

Many thanks, best of luck with all your projects everyone!


MIKE @ NST
fnkngrvIn The Hotbox · Dec 5, 2013#619
My 10% underdrive crank pulley came to me in 2008 and has been great for me however the one question I do have is whether or not you have a pulley that can handle 7-8k rpm operation without coming apart? Right now my research and past experience by another member is that once you really get into the more extreme rpm range you are pretty much going to have to use a stock pulley because these "upgraded" pulleys cannot handle the stresses at that level. Thoughts?
ChuckieManila, Philippines · Dec 6, 2013#620
Just received my CR Lite Crank Pulley on special order. Took awhile but really hoping it was worth the wait. Thank you NST...
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Dec 6, 2013#621
Originally Posted by cali yaris ↑
Mike, have you made any substantial changes to your designs? There are quite a few broken NST pulleys (crank and water pump) out there now with the old design.

Maybe start here: Very unhappy customer (NST pulleys).

with some customer service. 🙄
😆 👍 This is one of the best posts ever.....at least since 2009
NonStopTuningThread starterUSA · Dec 9, 2013#622
Originally Posted by fnkngrv ↑
My 10% underdrive crank pulley came to me in 2008 and has been great for me however the one question I do have is whether or not you have a pulley that can handle 7-8k rpm operation without coming apart? Right now my research and past experience by another member is that once you really get into the more extreme rpm range you are pretty much going to have to use a stock pulley because these "upgraded" pulleys cannot handle the stresses at that level. Thoughts?
Thanks bud, I appreciate the kind words.

Your NST crank pulley should be able to withstand RPMs higher than the OEM range. I realize there was a case where one of these pulleys cracked on a higher RPM engine, but I also know based on my personal experiences with our pulleys on several high revving race engines of our own, our pulleys have stood the test of time on several race engines constantly banging limiter, at 8,000 rpm and above.

The NST AE86 ran a Toyota 4AG turbo setup (OEM 4AG 100hp 7500rpm) making over 350hp and going past 8,000rpm from 2007-2012. Same setup, same NST crank pulley, no pulley failure. Our current Formula Drift AE86 runs a Honda F20 turbo setup (OEM F20 200hp 8500rpm) and makes over 500hp going past 9,000rpm.

This has also been the case with other NST race cars, 4cyl, V8, n/a, turbo, supercharged, Toyota, Honda, Nissan, etc.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Side Note: IF in theory, the NST crank pulley is not able to withstand higher than OEM RPMs, then neither should the OEM pulley be able to withstand such RPMs, being that the prevailing thought pattern has always gone down the road that, "the Toyota pulley is designed for this engine, the displacement, and the RPM range." Real world data and theoretical discussions are not always the same.

Best of luck with all your projects!
NonStopTuningThread starterUSA · Dec 9, 2013#623
Originally Posted by Chuckie ↑
Just received my CR Lite Crank Pulley on special order. Took awhile but really hoping it was worth the wait. Thank you NST...
Awesome! I certainly hope you are happy with your new pulley.
👍👍


Best of luck with all your projects!
Jason@SportsCarDebary, FL · Dec 9, 2013#624
Originally Posted by NonStopTuning ↑
Thanks bud, I appreciate the kind words.

Your NST crank pulley should be able to withstand RPMs higher than the OEM range. I realize there was a case where one of these pulleys cracked on a higher RPM engine, but I also know based on my personal experiences with our pulleys on several high revving race engines of our own, our pulleys have stood the test of time on several race engines constantly banging limiter, at 8,000 rpm and above.

Side Note: IF in theory, the NST crank pulley is not able to withstand higher than OEM RPMs, then neither should the OEM pulley be able to withstand such RPMs, being that the prevailing thought pattern has always gone down the road that, "the Toyota pulley is designed for this engine, the displacement, and the RPM range." Real world data and theoretical discussions are not always the same.

Best of luck with all your projects!
There is something odd going on with the 1NZFE at high RPM that causes it to reject aftermarket crank pulleys. Lost one of yours at 7300rpm on one motor, had an issue with a Beatrush pulley on another.

The OE pulley has been running solid at 7500rpm.
NonStopTuningThread starterUSA · Dec 10, 2013#625
Originally Posted by Jason@SportsCar ↑
There is something odd going on with the 1NZFE at high RPM that causes it to reject aftermarket crank pulleys. Lost one of yours at 7300rpm on one motor, had an issue with a Beatrush pulley on another.

The OE pulley has been running solid at 7500rpm.
Perhaps a solid (no holes, no slots) lightweight crank pulley is worth a try, something that we have the ability to produce for race use - going past 7500rpm.

Picture not included in this copy

For street cars, our regular Underdrive Crank Pulley and NST CR-Lite Crank Pulley should be, and have proven over the years to be, sufficient.

Picture not included in this copy

Best of luck with all your projects!
Jason@SportsCarDebary, FL · Dec 10, 2013#626
Originally Posted by NonStopTuning ↑
Perhaps a solid (no holes, no slots) lightweight crank pulley is worth a try, something that we have the ability to produce for race use - going past 7500rpm.

For street cars, our regular Underdrive Crank Pulley and NST CR-Lite Crank Pulley should be, and have proven over the years to be, sufficient.

Best of luck with all your projects!
The slots/holes were not the point of failure for us, it was the mounting point. There is very little cross section around the mounting hole, once the unit failed we could see that. The front and back cuts in that area left very little material in the corner, it was not as thick as the face of the pulley, and this is where it cracked.

After the NST failure I went back to the OE piece. Some time later we found the Beatrush unit, tried it on another motor and the Micro Image piece on our 2012. The Beatrush unit was much beefier, but ultimately still had an issue - I was very disappointed when we got it because we were given the impression it had an elastomer damper, but it did not, and it was nearly as heavy as the OE piece. Once we noticed a problem with the Beatrush (took almost a year) we went back to stock on both cars. It just wasn't worth the risk for us.

I believe the issue may be accessory related. Not having a self tension belt system on the 1NZFE means there is nothing to help absorb the vibration once you eliminate the dampened crank pulley.

I sure would like to see ATI or Fluidampr build one.

Our NST (the exterior damage is road rash from when it popped off and passed me on the track):
Picture not included in this copy

Beatrush, has a more material around the bolt area, but still has issues beyond 7300rpm:
Picture not included in this copy

When Micro Image designed its pulley they addressed the cross section/mounting point concern, and still managed to build a very light pulley, but we never ran one long enough to see if it would let us down:
Picture not included in this copy
JerkrattFair Lawn, NJ · Dec 11, 2013#627
Not to hijack but I've been wanting to inquire about a fixed pulley for my blitz kit. I know one was made. And have had no luck trying to reach over the phone and haven't had a chance to email. Think you can help?
cali yarisCanoga Park, CA · Dec 11, 2013#628
.
And have had no luck trying to reach over the phone
ChuckieManila, Philippines · Dec 12, 2013#629
This is probably a dumb question but would like to ask anyway: What happens when a crank pulley, wp or alternator pulley fails on the road at speed..?
Jason@SportsCarDebary, FL · Dec 12, 2013#630
Originally Posted by Chuckie ↑
This is probably a dumb question but would like to ask anyway: What happens when a crank pulley, wp or alternator pulley fails on the road at speed..?
When the crank pulley goes your engine will overheat, necessitating a head gasket replacement - really if any of them goes you are screwed because the belt is no longer spinning the others.
AstromanWenatchee, WA · Dec 12, 2013#631
My NST lite crank pulley has been working great for years however I'm not racing and have the stock rev limiter. My NST waterpump pulley though had a crack and a very very deep grove wore in from the belt and I replaced it with another NST pulley that was used.
cali yarisCanoga Park, CA · Dec 12, 2013#632
What happens when a crank pulley, wp or alternator pulley fails on the road at speed..?
What Jason said, plus the fact that pieces of metal could be flying around either in your engine bay, under your car, or on the road. In Jason's case, they were also winning.
1.5Tampa · Dec 13, 2013#633
hahahaha ^^ he got beat by his own pulley lol
ChuckieManila, Philippines · Dec 13, 2013#634
The NST pulley I bought. Sorry about the unglorified pictures. It is..solid... and beautifully made...

2 attachments not included in this copy