Replies continued
NonStopTuningThread starterUSA · Jun 26, 2009#451 Originally Posted by
llimonce ↑ i installed my pullies last saturday and i feel the diferences at low rpm`s in any gear ..
ít´s more easy to recovery the car .. thanks nst
Thank you 👍👍
Good luck and have fun with all your projects!
NonStopTuningThread starterUSA · Jul 1, 2009#452Anyone else?!
lilredrocketDFW, Texas · Jul 1, 2009#453Maybe this weekend I'm still waiting on my pully from garm.
NonStopTuningThread starterUSA · Jul 1, 2009#454Rock on Rocket!!!
drrossmalaysia · Jul 7, 2009#455Hi all. My first post in this forum. Installed the underdrive pulley last saturday. The engine is definitely more rev happy. Great product. Thanks to NST and Garm.
lilredrocketDFW, Texas · Jul 7, 2009#456Mike I got mine in the mail yesterday I will be installing it this weekend. I just wish I could make it to the drift practice day to tell you what I think. Oh well I will just have to post about it!!!
90tsimissouri · Jul 7, 2009#457i dont know if anyone has asked this but will all the pullies fit on the 09s as well. i have the shifter adapter and had to file down a little on the inside to get it to fit all the way on. i would assume the pullies would mount the same and be the same diameter but i just gotta ask.
llimoncevenezuela · Jul 8, 2009#458 Originally Posted by
NonStopTuning ↑ Anyone else?!
the 3 pulleys will fit in 1.3 2nzfe motor ?? it`s a yaris 2008 with electronic steering ... what is the part number of these pulleys ?? are the same ?? thanks
NonStopTuningThread starterUSA · Jul 8, 2009#459 Originally Posted by
llimonce ↑ the 3 pulleys will fit in 1.3 2nzfe motor ?? it`s a yaris 2008 with electronic steering ... what is the part number of these pulleys ?? are the same ?? thanks
Yes, the NST pulleys will fit the 1.3 with electric power steering...
http://www.nonstoptuning.com/pKitToyYaris.htm International shipping is available via USPS Global Priority Mail and the exact shipping amount is calculated by our online shopping cart at the time of each order.
Good luck and have fun with all your projects 👍
NonStopTuningThread starterUSA · Jul 8, 2009#460 Originally Posted by
90tsi ↑ i dont know if anyone has asked this but will all the pullies fit on the 09s as well. i have the shifter adapter and had to file down a little on the inside to get it to fit all the way on. i would assume the pullies would mount the same and be the same diameter but i just gotta ask.
Yepp, NST Pulleys are compatible with the 2009 Yaris 👍👍
lilredrocketDFW, Texas · Jul 13, 2009#461I just got to install my first of many to come NST products! I just put on my U-Drive pully it's amazing!!! Car idles smoother and revs faster its great!!! I'll post more in a week when I get some more seat time with it! Thanks Mike for a great product.
SplitEdmonton · Jul 13, 2009#462i got a set of these for free from a friend. they have some minor nics and chips in them. going farther than just the paint, but no cracks. Is there any harm in installing them or do they have to be 100% perfectly balanced?
silver_echoSpokane, WA · Jul 13, 2009#463 Originally Posted by
Split ↑ i got a set of these for free from a friend. they have some minor nics and chips in them. going farther than just the paint, but no cracks. Is there any harm in installing them or do they have to be 100% perfectly balanced?
not trying to be mean, but there is probably a reason they were free...
SplitEdmonton · Jul 13, 2009#464 Originally Posted by
silver_echo ↑ not trying to be mean, but there is probably a reason they were free...
my friend is a toyota mechanic and he was replacing a blown motor on a toyota yaris and they sourced a motor from a salvage yard. the motor they brought into the shop had these pulleys on it and they installed the motor into the customers car without the pulleys.
my friend whom is a toyota mechanic didn't seem to think there would be any problem with the scrapes and scuffs, but i'm just getting a second opinion.
sorry for all the typos. i'm writing this from a terminal server session and all the stupid animated gifs on the side slow down my session to a crawl.
NonStopTuningThread starterUSA · Jul 13, 2009#465 Originally Posted by
Split ↑ i got a set of these for free from a friend. they have some minor nics and chips in them. going farther than just the paint, but no cracks. Is there any harm in installing them or do they have to be 100% perfectly balanced?
Please post a pic and I will be happy to give you my opinion 🙂
Anything else would be speculation and may or may not apply to your individual case.
NonStopTuningThread starterUSA · Jul 13, 2009#466 Originally Posted by
lilredrocket ↑ I just got to install my first of many to come NST products! I just put on my U-Drive pully it's amazing!!! Car idles smoother and revs faster its great!!! I'll post more in a week when I get some more seat time with it! Thanks Mike for a great product.
Thank you for supporting said great product 👍👍
chongopantsHouston · Jul 15, 2009#467Would this be worth is in a auto tranny? 07?
chongopantsHouston · Jul 15, 2009#468whats the diff between the stock diameter and the underdrive/overdriver (if there is one) I am about to get an entire pully set and wanna get the most HP gain for off the line.
NonStopTuningThread starterUSA · Jul 15, 2009#469 Originally Posted by
chongopants ↑ whats the diff between the stock diameter and the underdrive/overdriver (if there is one) I am about to get an entire pully set and wanna get the most HP gain for off the line.
The Underdrive Crank Pulley is our most popular. This pulley, combined with the Alt & WP kit, offers the BEST all around performance and fuel economy for any manual or auto Yaris... n/a or turbocharged.
The CR-Lite Crank Pulley is the way to go for supercharged owners.
Reading through the many pages of this thread will explain these concepts further.
Feel free to give us a call and stop by our Houston showroom to chat further, take a look at all our products firsthand, and pick up a set if you're interested.
👍👍
NonStopTuningThread starterUSA · Jul 16, 2009#470Anyone else?!
🙂
fmicleSan Jose, CA, USA · Jul 17, 2009#471I just ordered my pulleys this morning, the underdrive crank pulley and the other two. I read this entire thread over the last couple of evenings and the feedback cannot be ignored :-) I decided to go with the gray ones, so they aren't that obvious in case someone takes a peek at my engine. In California they are not legal unless they have a C.A.R.B. E.O., if I understand this correctly. But oh well, how can improved HP and gas mileage be bad for you or the environment? :-) Having said that, I can't wait!
The Short Shift Kit and the shifting bushings are also on the list :-)
Mike,
I got a question for you, how hard/tricky is to install the pulleys for a typical DIY enthusiast? What I am most concerned about is to get things like belt tension correctly after I'm done and not break anything in the process :-)
I've installed a Radio/CD/MP3 player, towing hitch, electrical towing harness on my Yaris so far and I'm installing a cold air intake this weekend. But the pulleys seem to be by far the most "advanced" project - kinda pushing the limit of my comfort level. But on the other hand I want to do it myself, so I can bragg about it later ;-) What are your thoughts? If I get stuck, the auto shop is right around the corner I can push the Yaris over there ;-)
Oh and I got the rear windows plus trunk window tinted today... sweet! The ICW Racing wheels have been ordered and expected to arrive some time next week, yeah baby! :-)
NonStopTuningThread starterUSA · Jul 17, 2009#472fmicle,
Thank you for your interest in our site and products, we certainly do appreciate it.
NST Pulleys DO NOT change the engine's breathing or exhaust system, and
therefore do not change the air fuel ratio, nor the ECU's engine control
characteristics/programs.
Due to these reasons, there are no CARB or "smog" issues to worry about. As a result, no CARB sticker is necessary. DO NOT let anyone tell you otherwise.
Installation is not very difficult, and there are a couple good DIY installation guides on YW. The most difficult part of the process is breaking loose the crank pulley bolt, the one bolt that holds this pulley in place. You should be able to break it loose with the proper tools and will need a torque wrench to reinstall your bolt back to roughly 120lb ft torque.
Your belt tensioner is an automatic piece, which will make belt installation a breeze. Just install the NST pulleys, install your OEM belt, and tighten everything up.
Having said all of this, we recommend that everyone seek the assistance of a trained professional if they are at all uneasy or concerned about proper installation. NST pulleys have been proven to work time and time again, and we can not be held responsible for any damage caused by improper installation or any accidental damage during the install process.
Thanks again, good luck and have fun with all your projects!
fmicleSan Jose, CA, USA · Jul 27, 2009#473Alright, I just finished installing the underdrive crank pulley and the water pump pulley. I must say, I was afraid I was going to have difficulties with the crank pulley bolt, but it came off easily for me. Tightening it back together was a whole different story though :-) I was lucky that my neighbor came home as I was struggling and trying to figure out a way to prevent the damn pulley from turning, so I improvised with a rope and he held onto it, so I could torque it up to spec.
The water pump pulley was a bitch... Much more difficult to install than the crank pulley in my opinion, because it's much harder to get to. Anyway the 3 screws don't need that much torque though, so I managed again with the rope setup by myself.
Since I got the underdrive pulley, the mark I had made on the alternator support groove was useless, and I had to pull the alternator farther toward the front of the car to take the slack from the belt. After I tightened the bolt I felt it with my hand and it didn't feel as tight as before... But I took a test drive and everything seems good. I will admit that I didn't feel much of a difference, maybe because it's late and I'm tired or because I had my expectations a little too high... nevertheless I am happy, I thought it felt a little zippier on the freeway though... but it could all be in my head :-)
Unfortunately, I didn't get to install the alternator pulley, since I don't have the right tools. That seems to be a little tricky, it looks like I need 2 wrenches at the same time, one to hold onto the axle and the other to unscrew the nut.
Anyway, if anyone has a few words of wisdom regarding the driving belt, it will surely be appreciated.
I even turned on the AC on my test drive and everything was fine, no squeaking or funny noises. I remember my previous car (1998 Jeep Cherokee) used to squeak like hell when the engine was cold if I had the AC on (and I always thought the driving belt was a little loose, but was too lazy to get it fixed).
lilredrocketDFW, Texas · Jul 27, 2009#474Hey I just did my first auto-x with my u-drive pully yesterday and leaving it in second gear was great the car actually responded when I punched it in the lower RPM range. Thank you for the great product Mike!!! NST FTW!!!
lunjiaowPerth, Australia. · Jul 28, 2009#475Got a pulley set from Garm the other day. Great quality. Very light. Put them in today. Couldnt feel a difference. Must be better for manual transmissions. Will have to drive the car a bit harder.
AznGoukiCalgary · Jul 30, 2009#476Can you explain why the CR Lite pulley is better suited for supercharged cars? Like will there be a issue if I use that pulley? I plan on getting a supercharger down the road and I don't want 2 pullies. If you could explain the difference between the CR Lite and the Underdrive, I think I can finally make a decision haha. Also I believe I read that the underdrive pulley is smaller than stock and since I have no A/C I will have to get a shorter belt. Is the CR Lite pulley the same diameter as stock?
fmicleSan Jose, CA, USA · Jul 30, 2009#477 Originally Posted by
AznGouki ↑ Can you explain why the CR Lite pulley is better suited for supercharged cars? Like will there be a issue if I use that pulley? I plan on getting a supercharger down the road and I don't want 2 pullies. If you could explain the difference between the CR Lite and the Underdrive, I think I can finally make a decision haha. Also I believe I read that the underdrive pulley is smaller than stock and since I have no A/C I will have to get a shorter belt. Is the CR Lite pulley the same diameter as stock?
The underdrive pulley is a little smaller, so it ends up spinning the water pump, alternator, A/C compressor, etc a bit slower (10% in the case of NST underdrive crank pulley). This is enough to free up a little bit of power and at the same time not affect the other functions. Unless your stereo or some other electrical app requires a lot of power, you won't feel the difference just because the pulleys are spinning a little slower. It's like changing your driving style to 10% less rpm...
The basic idea is that smaller and lighter needs less energy to spin (accelerating and decelerating), so your engine will feel more responsive.
You don't need a shorter belt, you just need to adjust the alternator on the groove, pull it a little to take the slack out of the belt after you install the pulley. At least that's what I did on mine and so far it's been working fine.
AznGoukiCalgary · Jul 30, 2009#478Fmicle do you have A/C? I think it's Barber that has the underdrive installed and had to change his belt. Would there be a draw back if I use the CR Lite w/o a supercharger? I would imagine not since I'm thinking all it is, is a pulley that is significantly lighter.
NonStopTuningThread starterUSA · Jul 30, 2009#479The NST Underdrive Crank Pulley is intended for n/a or turbo applications. This pulley should not be used with a supercharger because it would lower PSI on such an application.
You can use the NST CR-Lite on n/a, turbo, or SC applications.
You can use the CR-Lite now and keep it installed once you install your supercharger.
👍👍
fmicleSan Jose, CA, USA · Aug 3, 2009#480 Originally Posted by
AznGouki ↑ Fmicle do you have A/C? I think it's Barber that has the underdrive installed and had to change his belt. Would there be a draw back if I use the CR Lite w/o a supercharger? I would imagine not since I'm thinking all it is, is a pulley that is significantly lighter.
Yes, I do have A/C and just got back from a trip to L.A. (from San Jose), and I had the A/C on 90% of the time. I must add that the car performed excellently, exceeding my expectations in terms of acceleration and speed. And the gas mileage I got on the way there blew me away. I will refuel on Tuesday and post my results to this thread.
I wouldn't call it a "drawback", it's an improvement either way, it's just a slightly better improvement with the underdrive than with the "lite", if my understanding is correct.
AznGoukiCalgary · Aug 3, 2009#481 Originally Posted by
NonStopTuning ↑ The NST Underdrive Crank Pulley is intended for n/a or turbo applications. This pulley should not be used with a supercharger because it would lower PSI on such an application.
You can use the NST CR-Lite on n/a, turbo, or SC applications.
You can use the CR-Lite now and keep it installed once you install your supercharger.
👍👍
Perfect. Just the answer I was looking for. Looking to purchase real soon.
NonStopTuningThread starterUSA · Aug 20, 2009#482 Originally Posted by
AznGouki ↑ Perfect. Just the answer I was looking for. Looking to purchase real soon.
We'll be here when you're ready 🙂
NonStopTuningThread starterUSA · Aug 30, 2009#483
All I can say is WOW...NST CR Lite Pulley
So I incorrectly thought my car was quite quick with the mods that I had installed, but after taking it out today for the first time with the NST CR-Lite pulley, I have to say I was sorely mistaken...
Now it's FAST... (O.K. excluding Garm...)
The crank pulley absolutely has changed everything...
The feeling that revving up first gear is going to blow up my engine is gone...It revs up nicely, and allows more time to prepare for second gear, which I felt was a trouble spot off the line before the pulley install...
Above 4000 RPM up to redline is just so much stronger, and more importantly smooth and effortless...The car is just nuts (my face literally switches between this and this ) now at 5-6000 RPM...
I'm actually glad I did this after all of my other mods; I didn't think there would be as much noticeable difference as compared to the postive feedback given by relatively stock guys doing this swap...
Cheers
Originally posted by echo_hrs
Link to a thread or page that is not in the archive 👍👍
jt258HOUSTON · Aug 31, 2009#484LOVE THE PULLEYS LOW TO MID RANGE IS EXCELLENT. GREEEEAT PRODUCT MIKE AND THANKS AGAIN.
ozmddDFW, TX · Sep 1, 2009#485Well, this is a lot to try and sort through. Guess I'll just ask anyway: what is the potential downside (if any) to using the underdrive version rather than the CR Lite?
rhino5Troy, PA · Sep 8, 2009#486Just ordered, updates when received and installed.
rhino5Troy, PA · Sep 13, 2009#487Took almost exactly 45 minutes with electric impact ratchet. Had a friend throw it in 5th and hold the brakes while I torqued her down (actually had to jack the car up higher just to get the clearance and a proper angle for the torque wrench).
Noticed a slight difference in revs and a very noticeable difference while passing in 3rd. Made the investment for fuel economy more than anything (my daily commute is 35 miles of mixed driving with a heavy foot, getting 35 +/-2 mpg now. If the results impress me at the pump, I might consider the Alt and WP pulley.
Anyone have anything to comment on upgrading from solely crank pulley to the combined 3?
ozmddDFW, TX · Sep 13, 2009#488Yup. Got my u-drive pulley installed on Friday, and I think it was closer to 30 mins, but maybe 45. I was excited! Same thing; had to jack the car up a bit more to get really good torque leverage. Its about as easy as anything you do on a car. The impact wrench makes it easy. Hardest thing is loosening the alternator lower-bolt.
Love the improved response and definitely better power in mid-gears. Not a huge increase, nut definitely noticeable from the get-go. I think driving on the regular commute route will reveal more as I approach the same roads I drive every day. No argument about the bang-for-the-buck argument; it is worth it.
lilredrocketDFW, Texas · Sep 13, 2009#489Told you these pulleys rock!!!
chongopantsHouston · Sep 13, 2009#490 Originally Posted by
lilredrocket ↑ Told you these pulleys rock!!!
Yeah I thought that would be a good idea, so that in combo with a cai, and good exauhst it should make a reasonable bit of difference.🎉
My next purchase is the larger sway bar from micro or NST if I can get a hold of them.
NonStopTuningThread starterUSA · Sep 28, 2009#491Any new NST Pulley owners out there?!
👍👍
bwong2Champaign, IL · Sep 29, 2009#492just got mine a couple days ago. have yet to put it on. can't wait!
*MAD DOG*Victoria, Australia · Oct 6, 2009#493Just got my Used Grey NST CR Lite Crank Pulley from tk-421. Thanks Bernie. It's in as new condition. I've done a bit of a search but I can't find a DIY for install. Is there one? I'm not even going to try to install this myself as i'm not mechanically minded, but i'd like to see how it's done and I have friends who are mechanically minded who could do it with instructions.
If there is no DIY how long would it take a mechanic to intall one?
I've been quoted $90 an hour labour and been told it may take an hour-an hour and a half!
1NZYaris1New Zealand · Oct 6, 2009#494 Originally Posted by
*MAD DOG* ↑ Just got my Used Grey NST CR Lite Crank Pulley from tk-421. Thanks Bernie. It's in as new condition. I've done a bit of a search but I can't find a DIY for install. Is there one? I'm not even going to try to install this myself as i'm not mechanically minded, but i'd like to see how it's done and I have friends who are mechanically minded who could do it with instructions.
If there is no DIY how long would it take a mechanic to intall one?
I've been quoted $90 an hour labour and been told it may take an hour-an hour and a half!
Honestly , if it takes them an hour , find a new Mechanic.
put up on hoist (5 min)
take drives side front wheel of (5 min)
use air impact gun to remove pullie nut (5 min)
remove old pullie ,and put new one on . (5 min)
put nut back on and tighten (5 min )
(replace if need) and tighten alt belt (10min)
put wheel back on (5 min )
test belt tightnes (5min)
total 45min's
and thats taking it real easy. 😁
oh and there was a DIY , but it was removed last month by it's creator.
Hmmmm
*MAD DOG*Victoria, Australia · Oct 6, 2009#495 Originally Posted by
1NZYaris1 ↑ Honestly , if it takes them an hour , find a new Mechanic.
put up on hoist (5 min)
take drives side front wheel of (5 min)
use air impact gun to remove pullie nut (5 min)
remove old pullie ,and put new one on . (5 min)
put nut back on and tighten (5 min )
(replace if need) and tighten alt belt (10min)
put wheel back on (5 min )
test belt tightnes (5min)
total 45min's
and thats taking it real easy. 😁
oh and there was a DIY , but it was removed last month by it's creator.
Hmmmm
Thanks for the info. Why would the DIY op delete his thread?
NonStopTuningThread starterUSA · Oct 6, 2009#496 Originally Posted by
*MAD DOG* ↑ Thanks for the info. Why would the DIY op delete his thread?
Because he decided that he no longer wishes to be part of YW.
But you can find the same DIY installation guide at the following link...
http://www.microimageonline.com/foru...nk-pulley.html Excellent DIY guide!
👍👍
*MAD DOG*Victoria, Australia · Oct 6, 2009#497 Originally Posted by
NonStopTuning ↑
Thanks Mike.
chesspirateSan Diego · Oct 9, 2009#498I purchased my underdrive crank pulley a couple of months ago, and have driven approx 10,000 miles since so this review is not "I just got it and it revs better".
I've thought about what to say, how to describe it, what the benefits are and all the blah blah blah. But if someone wants to know if they should purchase the product or not they need something a little more like...
There is no reason not to buy this product.
redglare45Pomona / Pasadena, California · Oct 9, 2009#499👍Hoping to have mine installed CR-Lite Pulley Set on Monday!
NonStopTuningThread starterUSA · Oct 9, 2009#500 Originally Posted by
chesspirate ↑ I purchased my underdrive crank pulley a couple of months ago, and have driven approx 10,000 miles since so this review is not "I just got it and it revs better".
I've thought about what to say, how to describe it, what the benefits are and all the blah blah blah. But if someone wants to know if they should purchase the product or not they need something a little more like...
There is no reason not to buy this product.
There is NO reason NOT to buy this product!!!
🙇 thank you thank you thank you 🙇