Yarisworld Archive

NST (NonStopTuning) Pulleys. Info, Specs, User Data...

634 posts · 271,668 views · page 11 of 13

Replies continued

NonStopTuningThread starterUSA · Oct 12, 2009#501
Any new user reviews, thoughts, or comments would be much appreciated!
AstromanWenatchee, WA · Oct 12, 2009#502
50k+ miles later, still doing this: 😁😁😁😁 🤘🤘🤘
NonStopTuningThread starterUSA · Oct 12, 2009#503
Originally Posted by Astroman ↑
50k+ miles later, still doing this: 😁😁😁😁 🤘🤘🤘
👍👍👍

😁 😁 😁

🙇 🙇 🙇
ozmddDFW, TX · Oct 12, 2009#504
Originally Posted by NonStopTuning ↑
Any new user reviews, thoughts, or comments would be much appreciated!
2008 Yaris LB 5-speed

I am running the NST 10% Underdrive CR-lite pulley. My only other HP-related mods are a Thunder axle-back and a TRD CAI w/WeaponR Secret Weapon dry filter. I just made 107 WHP and 106 TQ on a Mustang Dyno this saturday, in mid-70's (degrees F) weather.

I also am very pleased with the SSK.

(dyno charts posted in proper section)
NonStopTuningThread starterUSA · Oct 12, 2009#505
Originally Posted by ozmdd ↑
2008 Yaris LB 5-speed

I am running the NST 10% Underdrive CR-lite pulley. My only other HP-related mods are a Thunder axle-back and a TRD CAI w/WeaponR Secret Weapon dry filter. I just made 107 WHP and 106 TQ on a Mustang Dyno this saturday, in mid-70's (degrees F) weather.

I also am very pleased with the SSK.

(dyno charts posted in proper section)

Awesome!

Thank you for the review 👍👍
bwong2Champaign, IL · Oct 12, 2009#506
hi. i'm about to install an underdrive pulley tomorrow morning and was reading over the diy from the other site. there mentions a tic tac sized dowel that makes me slightly nervous. was wondering if i could get one ahead of time just in case i lose this from napa or the dealer and what it might be called there. thanks in advance!

Brian.
ozmddDFW, TX · Oct 12, 2009#507
It's not hard to keep track of, but you REALLY don't want to lose it.
NonStopTuningThread starterUSA · Oct 13, 2009#508
Originally Posted by bwong2 ↑
hi. i'm about to install an underdrive pulley tomorrow morning and was reading over the diy from the other site. there mentions a tic tac sized dowel that makes me slightly nervous. was wondering if i could get one ahead of time just in case i lose this from napa or the dealer and what it might be called there. thanks in advance!

Brian.
It's very easy to keep track of and is called the KEY 🙂
redglare45Pomona / Pasadena, California · Oct 14, 2009#509
I just got the CR-Lite Pulley Set installed. Great product. Butt dyno says there's some gains in HP. Also, seems to me that it revs quicker. Oh btw, they were the BLUE pulley's I bought from a board member.
NonStopTuningThread starterUSA · Oct 15, 2009#510
Originally Posted by redglare45 ↑
I just got the CR-Lite Pulley Set installed. Great product. Butt dyno says there's some gains in HP. Also, seems to me that it revs quicker. Oh btw, they were the BLUE pulley's I bought from a board member.

Wow! Blue ones were made for a very short time, they're pretty rare.
Thanks again for the review and the kind words, good luck with all your projects!

👍
andriesSpain · Oct 16, 2009#511
I have the 10% underdrive crankpulley on my 1.8 TS and it's a very,very great mod. Feels like a lot more horsepower.
NonStopTuningThread starterUSA · Oct 23, 2009#512
Originally Posted by andries ↑
I have the 10% underdrive crankpulley on my 1.8 TS and it's a very,very great mod. Feels like a lot more horsepower.
Thank you sir 😁
evo165*tIny dOts iN AsiA* · Nov 11, 2009#513
Hi guys, i just installed the underdrive pully on my auto yaris!

On first test drive right after installing, i felt the engine idling is smoother. As i slowly accelerate to move off, i can feel the engine is having less "load" than before!

Now when i tried to apply more harder throttle, immediately the engine downshift and rev to the near the redline easily and happily!!!!!

All in all, the underdrive pully is giving me better low-mid range power!🤘

P.S. I will like to take this chance to special thanks to Garm for his fast response on email, lighting fast shipping & nicely bubble wrap the pulley to ensure pulley is all round protected from any mis-handling by postman. Kudos to you, Garm!!
NonStopTuningThread starterUSA · Nov 11, 2009#514
Originally Posted by evo165 ↑
Hi guys, i just installed the underdrive pully on my auto yaris!

On first test drive right after installing, i felt the engine idling is smoother. As i slowly accelerate to move off, i can feel the engine is having less "load" than before!

Now when i tried to apply more harder throttle, immediately the engine downshift and rev to the near the redline easily and happily!!!!!

All in all, the underdrive pully is giving me better low-mid range power!🤘

P.S. I will like to take this chance to special thanks to Garm for his fast response on email, lighting fast shipping & nicely bubble wrap the pulley to ensure pulley is all round protected from any mis-handling by postman. Kudos to you, Garm!!

Glad to hear your happy review 👍

NST & MI FTW 👏
SLIK4Clearwater, Kansas · Nov 14, 2009#515
i do not have any NST products but have read alot about them and respect them a great deal for making unbelievable products. i am really wanting the crank pulley a great and will hopefully get one in the future most likely from micro image 👍. just wanted to say thanks again to NST for being such a great source of info. i have learned a alot from reading on this thread.v👍

NST FTW!!!
NonStopTuningThread starterUSA · Dec 9, 2009#516
Originally Posted by SLIK4 ↑
i do not have any NST products but have read alot about them and respect them a great deal for making unbelievable products. i am really wanting the crank pulley a great and will hopefully get one in the future most likely from micro image 👍. just wanted to say thanks again to NST for being such a great source of info. i have learned a alot from reading on this thread.v👍

NST FTW!!!

Thank you SLIK! And if you like NST this much now, wait till you have some of our products on your car!!!

👍👍
jonismynameadirondacks, ny · Dec 20, 2009#517
time to say my part. installed my 10% UD pulley in about 15-20 minutes in a garage with air tools. if you're a little person you'll prob have troubles getting the alternator loose... and i found removing just the two upper screws on the plastic fender thing was enough to get to the pulley...

immediate boost in throttle response, and acceleration. car feels lighter and more lively. i've done a number of mod's on the cheap to my car, including modified intake and axle back, and nothing has done more for my performance than my pulley i installed last night, regardless of cost. very happy with product and will recommend at every opportunity.
NonStopTuningThread starterUSA · Dec 20, 2009#518
Originally Posted by jonismyname ↑
time to say my part. installed my 10% UD pulley in about 15-20 minutes in a garage with air tools. if you're a little person you'll prob have troubles getting the alternator loose... and i found removing just the two upper screws on the plastic fender thing was enough to get to the pulley...

immediate boost in throttle response, and acceleration. car feels lighter and more lively. i've done a number of mod's on the cheap to my car, including modified intake and axle back, and nothing has done more for my performance than my pulley i installed last night, regardless of cost. very happy with product and will recommend at every opportunity.

Thank you Jon. Glad to read your review and very happy that you are satisfied with your purchase.

Good luck and have fun with all your future projects!


👍
yaris2010RSAngus, Ontario · Dec 21, 2009#519
is this tested on the 2010 1.5l yaris yet?
NonStopTuningThread starterUSA · Dec 21, 2009#520
Originally Posted by yaris2010RS ↑
is this tested on the 2010 1.5l yaris yet?
NST pulleys and kits are compatible with the 2010 Yaris 👍👍
danielmidGilbert, AZ · Dec 26, 2009#521
Installed the NST underdrive pulley today, took about 30 minutes. Awesome.
NonStopTuningThread starterUSA · Jan 3, 2010#522
Glad you like your new pulley!!!

👍👍
NonStopTuningThread starterUSA · Feb 7, 2010#523
Anyone else have any real world reviews to share? Those of you who have owned NST pulleys for several thousand miles... it would be much appreciated if you would chime in with your updates.

Thank you.
*MAD DOG*Victoria, Australia · Feb 8, 2010#524
Just had the NST CR Lite Crank pulley installed at a mechanic. They quoted me $90 labour an hour. They did the job in just under 30 minutes and charged me $45 woot. 👍

First thing I noticed was when I put my foot on the gas pedal the car responded quicker and appeared to take off from a stop start faster and easier.

Then I drove around for a while with a big grin on my face and was very happy when a set of lights turned red (another chance for a take off test). I'm very happy with the NST product and would recommend it to anyone and everyone with a Yaris.

My wife has a 1.3 litre Yaris, I think the biggest gain would be on her engine. Maybe I’ll talk her into one of these and then get the 10% underdrive for myself. 😁

NST FTW!
AstromanWenatchee, WA · Feb 8, 2010#525
The bodyshop at the dealership noticed my NST pulleys and asked me all sorts of questions about them and were quite impressed. I think my Yaris is the only one they've seen that has just more than aftermarket wheels on it. Over 50k miles so far on my pulleys and I couldn't be happier. 😁
ozmddDFW, TX · Feb 8, 2010#526
11K miles on my NST Underdrive pulley. 15 autocross events, 3 time trials. Zero problems, dyno-proven HP gains (see dyno thread), completely satisfied with the quality, aesthetics and performance of the product.
AothachosLong Island, NY · Feb 8, 2010#527
I'm not sure if this is normal, but I was checking the pulleys I installed, well the waterpump nst pulley is starting to get engraved into. Meaning the belt is digging into the pulley so that theres an engravment from the belt in it is this normal if anyone knows what i am talking about?
fmicleSan Jose, CA, USA · Feb 8, 2010#528
Originally Posted by Aothachos ↑
I'm not sure if this is normal, but I was checking the pulleys I installed, well the waterpump nst pulley is starting to get engraved into. Meaning the belt is digging into the pulley so that theres an engravment from the belt in it is this normal if anyone knows what i am talking about?
Yes, that is normal, everything will wear off eventually, even the strongest materials, just give it enough time and friction. The OEM water pulley is painted black, but when I took mine off it had a shiny strip where the belt makes contact.

Think of it almost as an infinite polishing machine 😉
AothachosLong Island, NY · Feb 8, 2010#529
Originally Posted by fmicle ↑
Yes, that is normal, everything will wear off eventually, even the strongest materials, just give it enough time and friction. The OEM water pulley is painted black, but when I took mine off it had a shiny strip where the belt makes contact.

Think of it almost as an infinite polishing machine 😉
so eventually overtime I will have to replace the pulley? Is there a set certain amount of miles that NST recommends to replace it if so? It has been about 25-30 thousand miles since I installed these. I think it is also why my belt is squeaking everytime i start up because it is loose due to friction engraving its place in it lol
fmicleSan Jose, CA, USA · Feb 8, 2010#530
Originally Posted by Aothachos ↑
so eventually overtime I will have to replace the pulley? Is there a set certain amount of miles that NST recommends to replace it if so? It has been about 25-30 thousand miles since I installed these. I think it is also why my belt is squeaking everytime i start up because it is loose due to friction engraving its place in it lol
Hmm, honestly, I don't know, but then aluminum is lighter and softer than steel, so I wouldn't be surprised at all if it wears off much quicker. Can you really see/feel a groove where the belt sits? If it's just polished shiny I wouldn't worry too much. It would be interested to compare with an older OEM water pulley, see if you get the same wear after a while.

My belt is squeaking too, 1 in 10 starts I'd say, because I couldn't get it as tight as it should be. But I'm working on adapting the Scion xD belt tensioner to the Yaris and if I can make it work, I'll post the DIY 🙂
AothachosLong Island, NY · Feb 8, 2010#531
Originally Posted by fmicle ↑
Hmm, honestly, I don't know, but then aluminum is lighter and softer than steel, so I wouldn't be surprised at all if it wears off much quicker. Can you really see/feel a groove where the belt sits? If it's just polished shiny I wouldn't worry too much. It would be interested to compare with an older OEM water pulley, see if you get the same wear after a while.

My belt is squeaking too, 1 in 10 starts I'd say, because I couldn't get it as tight as it should be. But I'm working on adapting the Scion xD belt tensioner to the Yaris and if I can make it work, I'll post the DIY 🙂
no the groove is pretty deep i say about 1-2mm, u can feel the edges perfectly where the belt sits on the pulley
jounabayamon puerto rico · Feb 9, 2010#532
is there a big difference installing the power pulley set versus the underdrive pulley alone? i mean is it worth it?
NonStopTuningThread starterUSA · Feb 15, 2010#533
Yes, there is a difference and it is worth it.
NonStopTuningThread starterUSA · Feb 25, 2010#534
We just shipped out a few packages to the members on the MI GB. I hope to see a few new reviews in this thread soon.

Pics, reviews, thoughts, and comments are always much appreciated!
lammy29Nottingham, UK · Feb 28, 2010#535
how much to uk for the 1.8 version?
NonStopTuningThread starterUSA · Feb 28, 2010#536
Originally Posted by lammy29 ↑
how much to uk for the 1.8 version?
http://www.nonstoptuning.com/pKitToyYaris.htm

Shipping fees, as always, are calculated by our online shopping cart at time of each order.

Thank you!
lammy29Nottingham, UK · Mar 1, 2010#537
Originally Posted by NonStopTuning ↑
http://www.nonstoptuning.com/pKitToyYaris.htm

Shipping fees, as always, are calculated by our online shopping cart at time of each order.

Thank you!
thanks... i think i might order it off garm as i am interested in buyiny aFe intake and perhaps little cheaper for shipping..... btw does garm get his orders from you?
NonStopTuningThread starterUSA · Mar 1, 2010#538
Originally Posted by lammy29 ↑
thanks... i think i might order it off garm as i am interested in buyiny aFe intake and perhaps little cheaper for shipping..... btw does garm get his orders from you?
Yes, Garm (MicroImage) is the largest Authorized NST Retailer of products for the Toyota Yaris. He places orders with us frequently.
yarstarGeorgia · Mar 2, 2010#539
40K/2 years now on my Underdrive Pulley Set. Still Lovin' every take off! Really, really helps. Great, high quality upgrade. Thanks again, NST.
🤘
NonStopTuningThread starterUSA · Mar 4, 2010#540
Originally Posted by yarstar ↑
40K/2 years now on my Underdrive Pulley Set. Still Lovin' every take off! Really, really helps. Great, high quality upgrade. Thanks again, NST.
🤘
👍👍
SchizopreniaSurabaya, Indonesia · Mar 18, 2010#541
Hi NST,
i just want to enquire something. ur parts here in this side of the world isn't so common(Indonesia) i needed more information, if i have the Thai's built yaris, would i need a different set that is intended for the asian built ones? i know that waterpump doesn't fit right away but requires some sort of spacer if im not wrong, correct? can you please elaborate and maybe provide more information on the other crank underdrive as well as the alternator. thanks.
YarizSE Texas · Apr 6, 2010#542
can someone point me to the new DIY for this, I keep getting the one that has moved.
NonStopTuningThread starterUSA · Apr 6, 2010#543
Originally Posted by Schizoprenia ↑
Hi NST,
i just want to enquire something. ur parts here in this side of the world isn't so common(Indonesia) i needed more information, if i have the Thai's built yaris, would i need a different set that is intended for the asian built ones? i know that waterpump doesn't fit right away but requires some sort of spacer if im not wrong, correct? can you please elaborate and maybe provide more information on the other crank underdrive as well as the alternator. thanks.
Thank you for your interest in our site and products, we appreciate it.

I have posted this info several times in this thread, but will post for you again...


IFFF your 1.3 or 1.5 Yaris has a single-row (one belt) crank pulley, then you can order pulleys from our Yaris page on our website.

IFFF your Yaris has a two-row (two belt) crank pulley, then you will need to order pulleys from our Scion xA/xB page on our website.

Yaris 1.8L pulleys are also listed on our website on the Yaris and Scion xD page.


Thanks again, good luck and have fun with all your projects!

👍👍
YarizSE Texas · Apr 9, 2010#544
Thanks guys, I got it...
NonStopTuningThread starterUSA · Apr 14, 2010#545
No problem.

Good luck and have fun with all your projects!
NetsPortugal · May 13, 2010#546
I have a question, if the crank pulley has the same diameter as the one that comes origin OEM, whats the thing about changing the belt in the case of the ones that do not have AC? it does not make any sense
AstromanWenatchee, WA · May 18, 2010#547
I agree. If the belt is still in good condition you can keep using the same belt. I have AC and used my belt for another 60+ thousand miles after my crank pulley install. I just replaced it last week because it was finally starting to crack and wear after 80k miles. It was the original belt that came on the car.
WeeYariGeorgetown, Ontario, Canada · May 18, 2010#548
Originally Posted by Nets ↑
I have a question, if the crank pulley has the same diameter as the one that comes origin OEM, whats the thing about changing the belt in the case of the ones that do not have AC? it does not make any sense
Comments about changing the belt are specific to the installation of the 10% UD pulley, not the CR Lite. In cars without A/C there is not enough swing on the alt bracket to achieve proper belt tension with the 10% UDP installed. Therefor a smaller belt is required.
NetsPortugal · May 19, 2010#549
but my car has te same crank pulley as scion xA xB and it does not have AC so the diameter being the same it does not make any sence to change the belt
The SpectacleTampa, FL · May 20, 2010#550
Sent email, don't feel like sifting through 31 pages to find the answers to my questions.