Yarisworld Archive

NST (NonStopTuning) Pulleys. Info, Specs, User Data...

634 posts · 271,668 views · page 12 of 13

Replies continued

d1nzfeasia · Jun 19, 2010#551
Great product, lasted me 50000km of use.😆
Picture not included in this copy
Picture not included in this copy
*MAD DOG*Victoria, Australia · Jun 19, 2010#552
Originally Posted by d1nzfe ↑
Great product, lasted me 50000km of use.😆
Picture not included in this copy
Picture not included in this copy
Did you install it yourself or get a mechanic to put it on?
sitoSingapore · Jun 20, 2010#553
Bro d1nzfe, any damage to your engine?
d1nzfeasia · Jun 20, 2010#554
Of cos i got mechanic to do it. Damaged to my pocket.
goliath1812Ocala Florida · Jun 20, 2010#555
geez... i have the crank lite pulley, the w/p and alt were going to be my next purchase. maybe not....
tk-421Dagobah · Jun 20, 2010#556
Originally Posted by d1nzfe ↑
Great product, lasted me 50000km of use.😆
Picture not included in this copy
For the record, I had never seen something like this happen to an NST pulley before. You should let Mike know about this.

Originally Posted by goliath1812 ↑
geez... i have the crank lite pulley, the w/p and alt were going to be my next purchase. maybe not....
WP and ALT pulleys are much smaller and sturdier. I'd be willing to bet they're impossible to break.
sitoSingapore · Jun 21, 2010#557
Originally Posted by tk-421 ↑
For the record, I had never seen something like this happen to an NST pulley before. You should let Mike know about this.



WP and ALT pulleys are much smaller and sturdier. I'd be willing to bet they're impossible to break.

But bro, the pulley shown is a water pump pulley, if i'm not wrong. 🙁
goliath1812Ocala Florida · Jun 21, 2010#558
Originally Posted by sito ↑
But bro, the pulley shown is a water pump pulley, if i'm not wrong. 🙁

+1
d1nzfeasia · Jun 21, 2010#559
Originally Posted by tk-421 ↑
For the record, I had never seen something like this happen to an NST pulley before. You should let Mike know about this.



WP and ALT pulleys are much smaller and sturdier. I'd be willing to bet they're impossible to break.
Yes, I trust them , hence this is my 2nd purchase, after my 1st got damaged in an accident. BUT no i'm not going to get another again. End of the road for me.
moh-6.304976,106.765952 · Jun 21, 2010#560
I just bought it last week ..
still in the delivery 😕
tk-421Dagobah · Jun 21, 2010#561
Originally Posted by sito ↑
But bro, the pulley shown is a water pump pulley, if i'm not wrong. 🙁
Damn you're right! Looked to me like the crank pulley the first time. 😳
Well I'll be...
d1nzfeasia · Jun 22, 2010#562
FYI its the water pump pulley.
*MAD DOG*Victoria, Australia · Jun 22, 2010#563
It's strange there has been no reply from Mike from NST. I've sent him a pm and a pm on facebook. Has anyone else tried to contact him about this?
ViozLong Island, NY · Jun 22, 2010#564
Damn that is crazy now I'm worried about my WP pulley because the belt is making a grove into it and I'm afraid its going to give in any day now, but my friend is a mechanic he said it's fine.
goliath1812Ocala Florida · Jun 22, 2010#565
Originally Posted by *MAD DOG* ↑
It's strange there has been no reply from Mike from NST. I've sent him a pm and a pm on facebook. Has anyone else tried to contact him about this?
This is something I can't stand. You would at least think he would reply in some way, even if it's a simple "We're looking into the problem.".
tk-421Dagobah · Jun 22, 2010#566
If you take the time to review this very thread, you can see how Mike always answers all posts. Just give it some time.
*MAD DOG*Victoria, Australia · Jun 22, 2010#567
Originally Posted by tk-421 ↑
If you take the time to review this very thread, you can see how Mike always answers all posts. Just give it some time.
I'm not slamming Mike. I know he answers questions about his products. Normally this is done promptly and within a day. This time no response as yet. Maybe he's on holiday or something. I'd just like too see what he says about this issue.

From what I've been told we don't need a dampener on these pullys. But that pulley that's come apart looks like metal fatigue, maybe caused by no dampener.

A lot of us have this product or similar, so we all have a vested interest in Mike's response. I need my car to get to work, I know how much better it performs with the CR Lite Crank Pulley, but if it's going to shatter and smash into pieces in my engine bay doing damage, maybe I should go back to stock pulley.

I am aware that the failed pulley shown is the water pump pulley. I have not heard of a failed NST crank pulley.
tk-421Dagobah · Jun 22, 2010#568
Originally Posted by *MAD DOG* ↑
From what I've been told we don't need a dampener on these pullys. But that pulley that's come apart looks like metal fatigue, maybe caused by no dampener.
The dampener/no dampener subject has been discussed and rediscussed ad-nauseaum on this very thread.

Additionally, the dampener/no dampener subject only applies to crank pulleys. The broken pulley in question is not a crank pulley, hence there's no point in bringing it up. The stock WP pulley does not have a dampener.

I am aware that the failed pulley shown is the water pump pulley. I have not heard of a failed NST crank pulley.
Exactly. No need to worry over nothing. Every product out there is prone to damage due to various factors -- some could be attributed to the manufacturer, others to the consumers and the way they (mis)use them.
*MAD DOG*Victoria, Australia · Jun 22, 2010#569
Originally Posted by tk-421 ↑
....The broken pulley in question is not a crank pulley, hence there's no point in bringing it up. The stock WP pulley does not have a dampener.
Originally Posted by *MAD DOG*
I am aware that the failed pulley shown is the water pump pulley...
Ummm i've already stated it's the water pump pulley Bernie.

Originally Posted by tk-421
Exactly. No need to worry over nothing. Every product out there is prone to damage due to various factors -- some could be attributed to the manufacturer, others to the consumers and the way they (mis)use them.
Bernie,

I'll choose what, when, why and how I worry over things, I always have and will. Why are you making a mountain out of a mole hill? This is for Mike to answer, isn't it?
tk-421Dagobah · Jun 22, 2010#570
Originally Posted by *MAD DOG* ↑
Ummm i've already stated it's the water pump pulley Bernie.
I know that, buddy. Which is why there's no need to bring up the dampener subject, is there?

I'll choose what, when, why and how I worry over things, I always have and will.
That's fine and dandy. I'm just trying to avoid you a headache over imaginary problems. Worry away if you must. 🙂

Why are you making a mountain out of a mole hill?
As you can see, it is not me who is making said mountain (or interested in doing so). I am, however, trying to help protect a brand that I happen to be a supporter of.

Having one (allegedly) faulty pulley (out of hundreds if not thousands of pulleys made by NST) potentially damage the reputation of a company that is backed by the tuning/performance scene in general but also these forums in particular doesn't seem like fair treatment to me, especially since we don't have enough facts about this particular case to reach any kind of conclusion either way.

Also, having someone post a potentially damaging post without consulting with the fabricator first doesn't seem fair to me either. But I guess that's just me.
*MAD DOG*Victoria, Australia · Jun 22, 2010#571
Originally Posted by *MAD DOG* ↑
This is for Mike to answer, isn't it?
Yes, yes it is.
goliath1812Ocala Florida · Jun 23, 2010#572
Originally Posted by tk-421 ↑
Also, having someone post a potentially damaging post without consulting with the fabricator first doesn't seem fair to me either. But I guess that's just me.
Seems perfectly fair to me. He's just trying to show everyone what happened in his case. Is it only fair for people to rant and rave about products, but when one fails, you're not allowed to tell anyone about it?? This is a simple "be aware of" thread, and sure, it would be nice to have contacted Mike first and he would be getting a replacement right now, but it still deserves to be info that is available for everyone to see what happened in this case.
It doesn't seem to be ruining Mike's reputation, we have pages and pages of nothing but praise for his pulleys, this it just another view on the subject of what can possibly go wrong.
d1nzfeasia · Jun 23, 2010#573
If u can still see my past posts, i did post on this thread before asking about this pulley. I have post some doubts on the wear and even post a pic on it long ago.I have great confidence in the product. But it fail me after 50000km++ so its the end of NST road for me. This is a fact.
shinleeaustin tx · Jun 23, 2010#574
I think he's being perfectly fair about his statements over the pulley breaking on him. If I bought something somewhere, and it broke on me, I'd be damned sure to tell EVERYONE that I knew who might buy something there as well. That being said, I still fully endorse NST pulleys, as I've had mine for almost 2 years now, and I still love them. Just nobody can make something 100% perfect, there will be some problems somewhere, sometime.
AstromanWenatchee, WA · Jun 23, 2010#575
60+ thousand miles on my full set and no problems. Perhaps the bolts were improperly torqued? Not bad seeing 1 problem out of thousands of users.
suillerTurin - Piedmont - italy · Jun 29, 2010#576
and for my "poor" 1NR-FE also known as 1.33 (101hp)... which pulley should I look for ??
evo165*tIny dOts iN AsiA* · Jun 29, 2010#577
Hi to all, can anyone Thai made Yaris mount on the water pump & alternator pulley without any problem. All Thai Yaris with this mod, PLEASE advise & confirm... 😳
NonStopTuningThread starterUSA · Nov 7, 2010#578
Picture not included in this copy

👍👍
ja-corderoguayaquil, ecuador · Nov 11, 2010#579
About NST (NonStopTuning) Pulleys, does anybody know if they work in a yaris sedan 1.5 a/t? I also ordered but not intalled OBX headers, K&N Typhon intake, Magnaflow muffler and the sprintbooster (electronic throtle accelerator).

I'll apreciate all your comments.

Thanks
ja-corderoguayaquil, ecuador · Nov 11, 2010#580
Does it fit in yaris sedan 2007 1.5 a/t??
N3misiSSouth Africa · Nov 15, 2010#581
Where can I find one for a 1krfe?

In SA
modelistaAurora · Dec 11, 2010#582
For those who have the full lite pulley set, would anyone care to give their impressions? I'm interested in these.
yaris2010RSAngus, Ontario · Dec 11, 2010#583
^ hey aurora, i have a cottage there (ninth line area)

as for the pulley set its really amazing. there is such a huge difference with them on. only issue is getting them on :p crank pully wasnt too bad to put on but holding it while tightning the blot was a challange. i also have lite water pump pully which took some time too get on but was very happy with the results none the less.
WeeYariGeorgetown, Ontario, Canada · Dec 11, 2010#584
Originally Posted by modelista ↑
For those who have the full lite pulley set, would anyone care to give their impressions? I'm interested in these.
The biggest bang comes from the crank pulley. The others in the set are mostly cosmetic.
modelistaAurora · Dec 11, 2010#585
^ why are the others in the set cosmetic? Is there anyone that started with just a crank pulley and added the other two pulleys later? I'm definitely going to get at least the crank pulley, but I'm on the fence on the other two.
yaris2010RSAngus, Ontario · Dec 12, 2010#586
i put just my crank on first and tested it out and i noticed a massive difference. put the water pump pully on and noticed nothing. the water pump pully i got was also grey so its not cosmetic at all..... i recommend only getting the crank and if i could do it all over again thats all i would get. the stock water pump pully is maybe only 1lbs difference then the lite one but the crank is almost a 20 lbs difference
Klink10910 · Dec 12, 2010#587
Originally Posted by modelista ↑
^ why are the others in the set cosmetic? Is there anyone that started with just a crank pulley and added the other two pulleys later? I'm definitely going to get at least the crank pulley, but I'm on the fence on the other two.
Yes....however it was when they introduced the crank first. Then the others came out. I believe cheaper prices were in back then also.
why?harnett county NC · Dec 12, 2010#588
hey, when you are talking about things that rotate every ounce counts. It might not be a ton, but the lighter those pulleys are, the less effort it takes to spin them, meaning more power for what really counts.
sitoSingapore · Jan 10, 2011#589
MR/MRS NST,

Please reply to me back in email if you see this.

I sent dozens of emails to you, asking when will i get back my replaced water pump pulley. It's been 3 months and i'm still waiting for my PULLEY.

THANKS!
ilikericesavannah, ga · Jan 10, 2011#590
even though its not really a huge wieght difference.. i compare it to running wide open with the A/C turned on and then doing it again with it turned off.. i got all 3 and i like it alot.. i really wanna do the lightwight flywheel and clutch set when i do the LSD also.. i hear that is a HUGE difference, 3x then the crank pulley
sitoSingapore · Jan 11, 2011#591
Originally Posted by sito ↑
MR/MRS NST,

Please reply to me back in email if you see this.

I sent dozens of emails to you, asking when will i get back my replaced water pump pulley. It's been 3 months and i'm still waiting for my PULLEY.

THANKS!
Anyone able to contact Mike from NST? I sent emails to NST and they didn't reply me anything till now. Can anyone help? Thanks.
TrubinBrooklyn, NY · Feb 6, 2011#592
Looking at the http://www.nonstoptuning.com/NSTPULL...tToyYaris.html
website and i am not sure which to put into my 1.5L 3 hatchback Yaris.
I believe the 10% under drive pulley would make most sense but I'd like to hear someone's thought about this decision.
what is the WP-Lite & ALT-lite KIT for?
car_buffvirginia, for now · Feb 15, 2011#593
Water pump and alternator. They are not underdrives, just awesome looking lighter version of own equip. Lighter means faster response from your engine.
ilikericesavannah, ga · Feb 15, 2011#594
water pump and alt pulleys are more cosmetic.. they are lighter, yes. but not enough to make a difference.. i got the 10% crank pulley and the waterpump/alt pulleys as well. i barely can tell the difference from the oem.. but they look cool!
TrubinBrooklyn, NY · Feb 19, 2011#595
Originally Posted by ilikerice ↑
water pump and alt pulleys are more cosmetic.. they are lighter, yes. but not enough to make a difference.. i got the 10% crank pulley and the waterpump/alt pulleys as well. i barely can tell the difference from the oem.. but they look cool!
I am a bit on a budget, would it be worth just getting the "NST 10% Underdrive Crank Pulley 1.5L" only?
cali yarisCanoga Park, CA · Feb 19, 2011#596
^ Yes. if you're on a budget, get the crank pulley. There is no downside to the underdrive version (you'll even use your stock belt with it), unless you are (1) supercharging or (2) bumping a huge, demanding sound system.

We are a preferred dealer for NST products:
http://shop.microimageonline.com/NST...L-NST09010.htm
JerkrattFair Lawn, NJ · Feb 20, 2011#597
Originally Posted by sito ↑
Anyone able to contact Mike from NST? I sent emails to NST and they didn't reply me anything till now. Can anyone help? Thanks.
ever get in touch with them?
sitoSingapore · Feb 20, 2011#598
Originally Posted by Jerkratt ↑
ever get in touch with them?
I sent tons of emails to them and they didn't reply me anything yet till now. There goes my water pump..🙁
PumpkinSteveTyne and Wear, UK · Feb 20, 2011#599
Originally Posted by sito ↑
I sent tons of emails to them and they didn't reply me anything yet till now. There goes my water pump..🙁
What terrible customer service. I emailed them last week and they didn't reply either.
TrubinBrooklyn, NY · Feb 21, 2011#600
Originally Posted by cali yaris ↑
^ Yes. if you're on a budget, get the crank pulley. There is no downside to the underdrive version (you'll even use your stock belt with it), unless you are (1) supercharging or (2) bumping a huge, demanding sound system.

We are a preferred dealer for NST products:
http://shop.microimageonline.com/NST...L-NST09010.htm
kool, thanks