my 07 was automatic and i had the pulleys on it.. was pepier and a little quieter aswell didnt have to grrrrrrrrr uphill anymore lol
NST (NonStopTuning) Pulleys. Info, Specs, User Data...
634 posts · 271,668 views · page 7 of 13
Replies continued
my 07 was automatic and i had the pulleys on it.. was pepier and a little quieter aswell didnt have to grrrrrrrrr uphill anymore lolthanks
We actually have quite a few automatic owners out there...Originally Posted by TheRealEnth ↑I was looking over a lot of posts and still havent got an answer, Wondering if any1 with an automatic has purchased the NST Pulley's to tell me if it feels much nicer?
unfortunately about 30 pages of the testimonies and feedback was lost in the recent hack.
The principles of weight reduction and underdrive apply in both auto and manual cars.
Dropping weight from the rotating assembly = increase in response and power delivery.
👍
hello NST, i'm from indonesia, and want to buy ur product by help of my friend.
could you sell the product at ebay ?, because my friend has ebay account. but he live at US, michigan state exactly.
if u dont have ebay account/id. could u tell me the way to buy on delivery to michigan ?
my questions are which product i should buy , i saw at ur NST website, there are 3 types
1.CR - lite crank pulley,
2. 10% underdrive crank pulley ,
3.WP-Lite &
ALT-lite KIT
which one should i choose ? and what is the differences ? could u explain to me, because i really confused.
my car is AT 1.5 Gasoline 1NZFE yaris built from thailand.
could you sell the product at ebay ?, because my friend has ebay account. but he live at US, michigan state exactly.
if u dont have ebay account/id. could u tell me the way to buy on delivery to michigan ?
my questions are which product i should buy , i saw at ur NST website, there are 3 types
1.CR - lite crank pulley,
2. 10% underdrive crank pulley ,
3.WP-Lite &
ALT-lite KIT
which one should i choose ? and what is the differences ? could u explain to me, because i really confused.
my car is AT 1.5 Gasoline 1NZFE yaris built from thailand.
Originally Posted by Rihanna ↑hello NST, i'm from indonesia, and want to buy ur product by help of my friend.
could you sell the product at ebay ?, because my friend has ebay account. but he live at US, michigan state exactly.
if u dont have ebay account/id. could u tell me the way to buy on delivery to michigan ?
my questions are which product i should buy , i saw at ur NST website, there are 3 types
1.CR - lite crank pulley,
2. 10% underdrive crank pulley ,
3.WP-Lite &
ALT-lite KIT
which one should i choose ? and what is the differences ? could u explain to me, because i really confused.
my car is AT 1.5 Gasoline 1NZFE yaris built from thailand.
Thank you for your interest in our site and products, we appreciate it.
Our most popular items are the following...
NST09010 Underdrive Crank Pulley. This pulley is intended for naturally aspirated or turbo models and will provide the most gains.
NST09025K Alternator and Water Pump Pulley Kit. This kit includes two lightweight pulleys and can be used with NST09010.
You can select these items (or your friend in Michigan) and purchase them from our website at the following page...
http://www.nonstoptuning.com/pKitToyYaris.htm
Our website is programmed to accept payments via PayPal, Credit Card, or Debit Card. Shipping is automatically calculated at the time of your order and packages ship via USPS Priority Mail. Your friend can also call us Monday through Friday if he/she would like to place a phone order.
Furthermore, this thread is FULL of information regarding these pulleys, their benefits and characteristics, and frequently asked questions.
Hey Mike,
Just a little report for your records.
The NST SSK does NOT fit in the new (2009) 6 speed tranny.
The new Yaris TS comes equipped with a brand new 6speed MT and I verified last week that the SSK wont work on this new tranny.
I believe that Toyota will be using this same tranny also for the Euro 2009 Yaris 1.3L and other compact models.
👍
Just a little report for your records.
The NST SSK does NOT fit in the new (2009) 6 speed tranny.
The new Yaris TS comes equipped with a brand new 6speed MT and I verified last week that the SSK wont work on this new tranny.
I believe that Toyota will be using this same tranny also for the Euro 2009 Yaris 1.3L and other compact models.
👍
Do we have any new NST Pulley owners with user reviews or comments to share?
I was thinking of getting the NST pulleys, but didn't want the invest in the whole set yet. As it cost queit abit. I was just wondering from what i've read the Underdrive Crank Pulley would provide the most gains? Is there much of a difference in gained power from say Crank+Alt+Water Pulleys and just Crank Underdrive by itself?. Im thinking of just getting the Underdrive first and might skip the rest if they don't provide as much of an improvement.
Ruimond
I wish I could give you a solid answer on that, but it would be from the Butt dyno vs real world figures. I did mine with the regular crank pulley plus alt. and WP from NST until they came out with the underdrive. Then I went to that. NST should have some figures somewhere here on the breakdown in gains...where I don't know. Send them a msg. and ask. Or ask Calis Yaris at Micro Image he lists their products and I'm sure can give you an answer or steer you to what you want to know.
I wish I could give you a solid answer on that, but it would be from the Butt dyno vs real world figures. I did mine with the regular crank pulley plus alt. and WP from NST until they came out with the underdrive. Then I went to that. NST should have some figures somewhere here on the breakdown in gains...where I don't know. Send them a msg. and ask. Or ask Calis Yaris at Micro Image he lists their products and I'm sure can give you an answer or steer you to what you want to know.
The Underdrive Crank Pulley is definitely the way to go if you can only afford to pick up one pulley.
Let's put it this way...
Want the ABSOLUTE best gains from your n/a or turbo setup? Pick up the Underdrive Crank Pulley along with the Alternator and Water Pump Pulley Kit.
On a budget and want 65% to 70% of the performance you would get if you had the FULL setup? Then go with the Underdrive Crank Pulley alone and pick up the other pulleys in the future.
The majority of our customers pick up a crank pulley and then come back for the other two pulleys a few months later, once they experience the gains from the crank pulley.
Good luck and have fun with all your projects!
Let's put it this way...
Want the ABSOLUTE best gains from your n/a or turbo setup? Pick up the Underdrive Crank Pulley along with the Alternator and Water Pump Pulley Kit.
On a budget and want 65% to 70% of the performance you would get if you had the FULL setup? Then go with the Underdrive Crank Pulley alone and pick up the other pulleys in the future.
The majority of our customers pick up a crank pulley and then come back for the other two pulleys a few months later, once they experience the gains from the crank pulley.
Good luck and have fun with all your projects!
im not sure if i posted this or not but i picket up the complete set on ebay when you sold them there a few weeks ago. shipping was excellent and the items arrived in perfect shape! the install was easy (i have access to air tools though) and straightforward. the car revs a bit quicker and feels stronger through the whole powerband.
this is a perfect first mod!
this is a perfect first mod!
Thank you for posting sir! We appreciate it!!!Originally Posted by mikenacarato ↑im not sure if i posted this or not but i picket up the complete set on ebay when you sold them there a few weeks ago. shipping was excellent and the items arrived in perfect shape! the install was easy (i have access to air tools though) and straightforward. the car revs a bit quicker and feels stronger through the whole powerband.
this is a perfect first mod!
More user pics, thoughts, comments would be appreciated!
These photo's where taken a few day's ago , the pullies have been in the car for 18,000KM's and no sign of wear or anodiseing comeing off .
1 attachment not included in this copy
does the pulley kit works on the japanese corolla with 1.5liter engine?
It will work well if you have the 1.5liter 1NZ engine, with electric power steering!Originally Posted by nigel ↑does the pulley kit works on the japanese corolla with 1.5liter engine?
👍👍
What happened to the DIY guide for the water pump and alt. pullies?
Good question!Originally Posted by cm07yaris ↑What happened to the DIY guide for the water pump and alt. pullies?
Not yet man , Whats up with sponsorship???Originally Posted by NonStopTuning ↑Do we have any new NST Pulley owners with user reviews or comments to share?
blacksandiegovitz, you have a PM.
Just got my NST Underdrive Pulley and NST Shifter Cable Bushing in the mail! So excited, will be getting it installed this afternoon and post results.
AWESOME! 👍Originally Posted by ruimond ↑Just got my NST Underdrive Pulley and NST Shifter Cable Bushing in the mail! So excited, will be getting it installed this afternoon and post results.
Went to my mechanic today to get the underdrive pulley and shifter cable bushings installed.
First impressions of the underdrive pulley, it felt alot lighter then the stock crank pulley. Which was good. Installation was fairly quick about 30-40mins tops.
One problem my mechanic mentioned that he had the push the tension to the max setting which could require a shorter belt in the future if it started making start up noises/squeeks. But none the less he said it was good for now anyway.
Started the car up. No sound issues. Driving impressions were good, it felt abit smoother to get up to speed. The throttle response was abit more revvy, but i did not get to fully test it. So it did not seem like it was a huge difference, but there is definately abit more punch.
Onto the shifter cable bushings, my mechanic installed the fairly easy. Moving it around for the first time after the bushings were installed it felt very stiff, i almost could not move it. Haha, but after a few shifts while the car was sitting, the movement came back. I have the NST Engine Short Shifter and i must say that they work well together. It feels alot more firmer then it was, which makes it alot better to drive now.
Overall i'm pretty satisfied with these products, but i'll have to give the pulley abit more testing 😆
First impressions of the underdrive pulley, it felt alot lighter then the stock crank pulley. Which was good. Installation was fairly quick about 30-40mins tops.
One problem my mechanic mentioned that he had the push the tension to the max setting which could require a shorter belt in the future if it started making start up noises/squeeks. But none the less he said it was good for now anyway.
Started the car up. No sound issues. Driving impressions were good, it felt abit smoother to get up to speed. The throttle response was abit more revvy, but i did not get to fully test it. So it did not seem like it was a huge difference, but there is definately abit more punch.
Onto the shifter cable bushings, my mechanic installed the fairly easy. Moving it around for the first time after the bushings were installed it felt very stiff, i almost could not move it. Haha, but after a few shifts while the car was sitting, the movement came back. I have the NST Engine Short Shifter and i must say that they work well together. It feels alot more firmer then it was, which makes it alot better to drive now.
Overall i'm pretty satisfied with these products, but i'll have to give the pulley abit more testing 😆
Thanks for the full review sir! Your NST mods will be more enjoyable as time passes, I promise.
Good luck and have fun with all your future projects!
👍
Good luck and have fun with all your future projects!
👍
with the underdrive..stock equipment is just retensioned correct?
Yes, I just installed the CR lite pulley on my Xb today. I have some positives and negatives.Originally Posted by NonStopTuning ↑Do we have any new NST Pulley owners with user reviews or comments to share?
Positives- I emailed NST to ask about a pulley for the Xb because it was listed as "special order". The good news was they has 2 in stock, a grey one and a red one, so no 5 week wait. I ordered the grey one and received it on monday (1/19).
The materials and workmanship are superb. It spins so smoothly I just had to watch it idle for like a minute.
Negatives- I see NST has listed the other red pulley they had in stock on ebay for $25 less than what I paid just days earlier. 👎
I installed it today, everything went great, but the power steeering belt is a bitch to both loosen and tighten.
Now for the wierd stuff. I left my brothers shop following installation of the pulley and drove about six miles on the interstate and began to hear a sort of rhythmic vibration most notable around 3000-3200 RPM's. The noise got quite loud and freaked me out so I took an exit and pulled into a parking lot to inspect. The noise was now audible at all engine speeds and (having opened the hood) was clearly coming from the pulley area. I was now pissed and jumped back in the Xb to go to my brothers shop to swap it back to stock. By the time I got back the noise was almost gone. I even took my brother for a ride so he could hear it, and by the end of that short ride it was completley gone. 🤷 I decided to keep it installed and see what happens. 14 miles home, no noise. Then I just drove to work (where I am now) and it was buttery smooth, no noise, and I could definitley feel the extra Zippiness in the lower gears. Anyone experience this following installation of their pulley?
Final negative is the NST pulley weighs 1lb 9.2oz while the stock weighs 3lb 11.3oz, so just a 57% reduction in weight. Not bad, just not as much as many other pulleys they have listed.
Overall I am very happy, just concerned what the noise was and wondering if it will return.
Edit- See post #331 for an explanation of what caused the noise.
Hmmm... very strange. I can honestly say that I have never heard of this (noise) issue. That having been said, I can only speculate as to what the noise may have been...Originally Posted by PetersRedYaris ↑Yes, I just installed the CR lite pulley on my Xb today. I have some positives and negatives.
Positives- I emailed NST to ask about a pulley for the Xb because it was listed as "special order". The good news was they has 2 in stock, a grey one and a red one, so no 5 week wait. I ordered the grey one and received it on monday (1/19).
The materials and workmanship are superb. It spins so smoothly I just had to watch it idle for like a minute.
Negatives- I see NST has listed the other red pulley they had in stock on ebay for $25 less than what I paid just days earlier. 👎
I installed it today, everything went great, but the power steeering belt is a bitch to both loosen and tighten.
Now for the wierd stuff. I left my brothers shop following installation of the pulley and drove about six miles on the interstate and began to hear a sort of rhythmic vibration most notable around 3000-3200 RPM's. The noise got quite loud and freaked me out so I took an exit and pulled into a parking lot to inspect. The noise was now audible at all engine speeds and (having opened the hood) was clearly coming from the pulley area. I was now pissed and jumped back in the Xb to go to my brothers shop to swap it back to stock. By the time I got back the noise was almost gone. I even took my brother for a ride so he could hear it, and by the end of that short ride it was completley gone. 🤷 I decided to keep it installed and see what happens. 14 miles home, no noise. Then I just drove to work (where I am now) and it was buttery smooth, no noise, and I could definitley feel the extra Zippiness in the lower gears. Anyone experience this following installation of their pulley?
Final negative is the NST pulley weighs 1lb 9.2oz while the stock weighs 3lb 11.3oz, so just a 57% reduction in weight. Not bad, just not as much as many other pulleys they have listed.
Overall I am very happy, just concerned what the noise was and wondering if it will return.
I would suggest double checking your belts, making sure that they are both routed propely, and that neither was pinched during installation. Also, how many miles do you have on these belts? Belts are wear and tear items, and do need to be replaced from time to time. Again, these are just some things to check... I am not saying this was the cause of the noise.
Otherwise, I would keep an eye on your engine bay to make sure everything is in the right place and working as it should be.
You are more than welcome to take off the pulley and return it to us for inspection, should the noise return.
I am always available via PM, Email, AIM, and of course PHONE.
Thank you again for your interest in our site and products, we certainly do appreciate it. Good luck and have fun with all your future projects!
👍👍
Yeah, it definitely was a noise, I shouldn't have said vibration as I couldn't feel anything or see anything while it was idleing with the hood up. I guess it was more of a rhythmic ringing. Very wierd...🤷
The belts are origional and have 59,000 miles on them, they looked fine so I reused them. I'm sure the routing is correct and belt tension is on the low side as I would rather have a belt slip than over tighten it.
I can't explain it. It drove home from work perfect as can be. And might I add I got to really feel the difference in acceleration.
My garage is too full to pull my car in (hence the reason for going to the shop to install it), but if we have a warm day I'm going to pull off the passenger wheel and inspect everything just for peace of mind. And of course should it do it again I'll remove it and send it in for inspection. I just fear it's not the pulley (i don't see how it could be).
Oh and one last negative, it has no NST logo etched on it. I was a bit dissapointed by this. 😢 Just the smooth anodized grey finish...
The belts are origional and have 59,000 miles on them, they looked fine so I reused them. I'm sure the routing is correct and belt tension is on the low side as I would rather have a belt slip than over tighten it.
I can't explain it. It drove home from work perfect as can be. And might I add I got to really feel the difference in acceleration.
My garage is too full to pull my car in (hence the reason for going to the shop to install it), but if we have a warm day I'm going to pull off the passenger wheel and inspect everything just for peace of mind. And of course should it do it again I'll remove it and send it in for inspection. I just fear it's not the pulley (i don't see how it could be).
Oh and one last negative, it has no NST logo etched on it. I was a bit dissapointed by this. 😢 Just the smooth anodized grey finish...
could be the belt on the new pully........I had a pontiac that i put pullys on and it made a nasty noise the first 5 miles which took me an hour to drive as i pulled over to look for issues every 1000 feet too.......check the alignment of the pully and make sure it is not on to deep or shallow....that was what my first thought was on mine,but ended up being old belt no like the new pully.
Originally Posted by PetersRedYaris ↑
The belts are origional and have 59,000 miles on them, they looked fine so I reused them. I'm sure the routing is correct and belt tension is on the low side as I would rather have a belt slip than over tighten it...
I would suggest using a new set of Gates belts. 59K is a lot of miles for one set of belts, and the belts have surely stretched and aged a bit by now.
Even if they aren't noisy anymore, it would probably be a good idea to replace them. After all, belts are wear and tear items and should be replaced from time to time.
Well, I'm quite certain I've found the problem, which brings both good and bad news. The good, the NST pulley in no way has caused the problem. The bad, the water pump has some dried antifreeze "crust" below it, indicating a failing water pump. I did some searching on Scionlife and found this.
http://www.scionlife.com/forums/view...ght=water+pump
Watch the video... Wow, a similar noise. Why mine decided to make the noise when it did and then go away is beyond me. Coincidence I guess. And according to the scionlife thread, it seems earily common to have a WP go out at about my mileage.
So, long story short, I'm not replacing it tomorrow as I have found zero fluid under the car after it has been parked and the noise has not returned. I'll get a genuine pump (and some belts I suppose) from Sparks Toyota and keep it ready for when the noise returns or a faster leak developes.
Oh and here are a couple pictures.
Heres the Pink "crust" under the WP-
Picture not included in this copy
And an installed pic of the NST pulley-
Picture not included in this copy
No NST etched logo. 😢
http://www.scionlife.com/forums/view...ght=water+pump
Watch the video... Wow, a similar noise. Why mine decided to make the noise when it did and then go away is beyond me. Coincidence I guess. And according to the scionlife thread, it seems earily common to have a WP go out at about my mileage.
So, long story short, I'm not replacing it tomorrow as I have found zero fluid under the car after it has been parked and the noise has not returned. I'll get a genuine pump (and some belts I suppose) from Sparks Toyota and keep it ready for when the noise returns or a faster leak developes.
Oh and here are a couple pictures.
Heres the Pink "crust" under the WP-
Picture not included in this copy
And an installed pic of the NST pulley-
Picture not included in this copy
No NST etched logo. 😢
Correct!Originally Posted by at3GG ↑with the underdrive..stock equipment is just retensioned correct?
👍
Anyone want to save about $30 on a set of ALT & WP Pulleys?!
Link to a thread or page that is not in the archive
Have a great week everyone!!!
Link to a thread or page that is not in the archive
Have a great week everyone!!!
I am just so amazed at how fast your customer service guys at NST responded to my email, or it might have been you mike? :)
Thanks, just waiting to get my Yaris now. And a boatload of parts too!!!
Thanks, just waiting to get my Yaris now. And a boatload of parts too!!!
Yes sir, I was the one who answered your Email. You're very welcome.Originally Posted by botchilah ↑I am just so amazed at how fast your customer service guys at NST responded to my email, or it might have been you mike? :)
Thanks, just waiting to get my Yaris now. And a boatload of parts too!!!
And if you enjoyed our customer service, just wait until you have our pulley kit installed and go for a test drive!!!
Please help spread the good word about NST in your area, we would appreciate it.
👍👍
Those who have purchased pulleys recently need to post pics, impressions, reviews ASAP 😁
🙁😠🤷😕😳
Crank Pulley
stock 50 oz --- nst 13oz
-Alternator Pulley
stock 10 oz --- nst 2 oz
-Water Pump Pulley
stock 14 oz --- nst 6 oz
What about the 10% underdrive crank pulley?
How much does it weight ?
stock 50 oz --- nst 13oz
-Alternator Pulley
stock 10 oz --- nst 2 oz
-Water Pump Pulley
stock 14 oz --- nst 6 oz
What about the 10% underdrive crank pulley?
How much does it weight ?
I see installing the underdrive pulley means you need to re-tension the belt... how do I do that? and how do I know what the tension is supposed to be?
The alternator is used as the main source of tension for the belt.Originally Posted by CtrlAltDefeat ↑I see installing the underdrive pulley means you need to re-tension the belt... how do I do that? and how do I know what the tension is supposed to be?
When in doubt... more tension is better than more slop.
Carefull!!! Too much tension will damage the waterpump!
There was a DIY posted that included a method which I also used. Prior to loosening the alt., mark it with a line using a felt tip at the point where the bolt goes thru the bracket. This way you have a line on the alt. and the bracket. Without smearing the marks in the process, do your replacement and then realign the marks and secure. If you are also putting on the 10% underdrive crank your bolt position will move approx. 1/2 to 3/4 in. As far as tool used to achieve the tension, I used a wrapped prybar placed carefully.Originally Posted by CtrlAltDefeat ↑I see installing the underdrive pulley means you need to re-tension the belt... how do I do that? and how do I know what the tension is supposed to be?
Don't forget to allow for stretch if you are doing a belt change. Your marks will not align and to much tension to get them too will or may cause damage to other parts.
Hope that helps.
Glad you are enjoying your pulley!!!Originally Posted by CtrlAltDefeat ↑... and now I've had a few days with a properly working car and I really only have one word for the underdrive pulley...
😳 WOW! 😳
It's hard to believe one little upgrade could make such a difference... It revs better, accelerates faster, even sounds nicer, I think. One thing I know, the shift points have moved. With the stock pulley, shifting into 2nd happened at 30mph and shifting into 3rd at 60mph. It's changed to 33-34mph and 63-64mph respectively. And getting to those shift points is much quicker. In stock form hitting 85mph was like an event. (that's my video btw) Now I find myself pulling it back from 80 all the time... I down shift to pass someone, and suddenly I'm on my way towards 90... To tell the truth, with stock suspension I think it's almost a little scary! 😲 I took my coworkers to lunch yesterday, and thought it was kinda funny to watch their heads snap backwards. 😁 I think I'm going to take another 0-85 video when I get a chance and post it here...(maybe after my springs are installed) In closing I must say
NST FTW! 😁
Yes, these same pulleys fit the 1.3L. Many international Yaris owners are using these pulleys.Originally Posted by Rudysin507 ↑Now this is my question.... is there any of those pulleys available for the 1st generation Yaris or Echo (whatever makes you happy)? we have a small crew down in Panama city, Panama very interested on that but we are not sure if we get them, are they going to fit or to work in our engines? 1.3L 2nz-fe
Good luck and have fun with all your projects down there 👍
Originally Posted by Rudysin507 ↑Now this is my question.... is there any of those pulleys available for the 1st generation Yaris or Echo (whatever makes you happy)? we have a small crew down in Panama city, Panama very interested on that but we are not sure if we get them, are they going to fit or to work in our engines? 1.3L 2nz-fe
My 3rd gen yaris is running a 2nz-fe and i an running all the NST pullies
and they are great.
Whats is the diffrence in performance between the light CR and the 10% under light CR pulley.
CR-Lite can be used in n/a, turbo, and supercharged applications.Originally Posted by kimo ↑Whats is the diffrence in performance between the light CR and the 10% under light CR pulley.
Underdrive Crank Pulley is designed for n/a, and turbo, and will free more power for these applications.
👍👍
Can these things endure years of roadsalt from nasty NE winters?
I'd think anodized aluminum would handle it better.Originally Posted by auxmike ↑Can these things endure years of roadsalt from nasty NE winters?
You might wanna check on something else if you are getting salt that far up into your engine compartment though :D
You should not have a problem at all ,
as i have use anodized pullies for years on boat -anchor whinches 👍
as i have use anodized pullies for years on boat -anchor whinches 👍