Yarisworld Archive

NST (NonStopTuning) Pulleys. Info, Specs, User Data...

634 posts · 271,668 views · page 5 of 13

Replies continued

NonStopTuningThread starterUSA · Jul 28, 2007#201
Originally Posted by jdium ↑
That's what I want to see 1st. The Lotus graph looks terrible, what happened at 6k?
Why do the Lotus graphs look terrible? The Lotus Elise and Exige are basically track ready cars out of the box. The Elise has some of the lightest and most efficient OEM pulleys I have ever worked with, and NST pulleys still provided positive gains.

What happens around 6,000 RPM is the Toyota Variable Valve Timing (VVTi / VVTLi) that kicks in. The engine makes a lot more power from 6,000 to redline, as evident in the graphs there.

The same thing can be seen in the dyno chart above posted about the Civic Si and the Acura TSX. Vtec kicks in around 6,000 RPM and power increases significantly.

As you can see, NST pulleys continue to free up power even beyond this point.
Black YarisToledo, OH · Jul 30, 2007#202
well I jumped on the bandwagon and installed my crank pulley.... besides having the little bit of bling under the hood, there is a noticably better throttle responce, those extra 5HP to the wheels you can feel too, and for those of you that have tweeked on the exaust like I have it smooths out that rough idle a lot.... and this pulley combinded with the NST Short Shifter, it makes this car so much more fun to drive! never thought a pulley could do so much, but now that I have the crank pulley I can not wait for the final installment of pulleys

If you do not already own one of these you are missing out
DezodWestern NY · Jul 30, 2007#203
Mike & NST are a proven gain unit. Their units are reliable, excellent in construction and I personally use their products for my cars! They are an excellent company and we only deal companies that we know stand behind their products as much as we do.

On that note, we have crank pulleys in stock! Come and get em!
TheCutsmanElk Grove Village IL · Aug 1, 2007#204
One of my buddies said a harmonic balancer is needed to put this on. Is this true?? I saw a few posts about engine vibration and was wondering if maybe not using the balancer had anything to do with that.
Motorhead6T5NorCal · Aug 1, 2007#205
Originally Posted by TheCutsman ↑
One of my buddies said a harmonic balancer is needed to put this on. Is this true?? I saw a few posts about engine vibration and was wondering if maybe not using the balancer had anything to do with that.
These pulleys do not have a dampening ring,which will lead to more engine vibration down low. Will it have an effect on engine bearing life? Only time will tell I guess.🤷

Its my experience with toyota you can't kill these things if you wanted to,so I would not be surprized if the engine still went 200k miles + anyways.

I am not trying to dirt NST's product,as I have seen tons and tons of people very happy with their product and actualy not one complaint. I just think people should be informed on all aspects of the modifications they are doing to their cars.
NonStopTuningThread starterUSA · Aug 1, 2007#206
This is actually the fourth time we are covering this subject of vibrations, balancing, and dampers again. But I don't mind, I understand that your cars are a very large investment for all of you and I prefer that you be intelligent and informed about all your modifications. So here we go again... Please take a few minutes to read everything I have posted here, as I worked hard on trying to give you a good explanation on the topic...

In the past many engines were externally balanced. There was an external balancer attached to the outside of the engine, on the crank snout, used to balance the engine externally. The crank pulley in such engines would then be attached to this balancer. Removal of this balancer is a bad idea. These balancers were most often used on large (6 to 8) V shaped engines of the domestic muscle car era.

Take a look at any modern (1980s and beyond) Honda, Toyota, Nissan, or other japanese inline 4 and you will find no such balancer. These engines are all internally balanced, and this process has improved even further since the late 1990s. So the topic of a BALANCER does not apply here.

What you will find on ALL engines is a harmonic damper. This is a small rubber band, litterally less than 2mm, less than 1/8th of an inch, thick that is built into the crank pulley. OEM crank pulleys are often called DAMPERS. Try placing an order for a crank pulley at your Toyota dealer and your invoice will read damper. This rubber is used to absorb something called NVH, noise/vibration/harshness. Suffice it to say, this rubber is actually not very good at performing its intended purpose after as little as a few thousand miles. What happens to rubber after a couple years of humidity, weather, snow, rain, etc? It often becomes brittle, hard, and crunchy. Can something with these properties actually absorb vibrations very well?

Many many NST customers, including people on your own forums, have reported smoother running engines with NST pulleys. Especially at idle. How is this possible if the rubber is such a vital and super important piece??? Perhaps the rubber is not as important as it is cracked up to be???


Furthermore....


On the topic of the rubber damper, engine vibrations, or possible threats resulting from elimination of this rubber piece...

On a relatively understressed near stock motor with bolt ons or low amounts of boost like what most of the people on this forum probably run, a solid pulley will not have any life threatening consiquences. The factory pulley with a 2mm (less than a 1/8th inch) damper is primarily there for wide band NVH (noise vibration harshness) supression from the engine and driveline. Removing the damper and replacing it with a solid pulley may lead to minor addtional NVH but will not harm the engine. In fact, most people claim their engines seem to run smoother with NST pulleys.

The engineering reasons are that most modern engines have a short, strong crank with, a relatively high natural frequency. The dangerous second harmonic that can cause damage occurs at an rpm that this sort of engine will never see, in the area above 10,000 rpm. Even the stock damper is not tuned for attinuation at this sort of rpm so the argument is somewhat of a moot point.

Now small engines that are pushing the limit with lots of revs, wimpy cranks, super long strokes, lots of boost and dwelling in the upper rpm ranges for long periods of time can benefit from a damper designed to deal with this sort of operation but our engine is not like this, and probably very few people with this motor on this forum push the envelope that hard. How many 1.5Liter, 400HP, 11,000RPM Yaris motors do we have on these forums?

As far as I can tell, our engine has a strong and stiff bottom end that is well built for our intended use. It has an internaly balanced crankshaft which is less like to break due to torsional vibration.

There are a lot of Nissan guys who use underdrive crank pulleys in road racing series like NASA or SCCA. Road racing is much more punishing on an engine than other motorsports. The engine is subjected to run times lasting 23 to 45 minutes with the engine always in the upper ranges of its rpm limit. One race weekend is the equivlent of hundreds of 1/4 mile passes.

NST sponsors the first ever wheel to wheel Scion tC NASA Road Race car. This car has been using underdrive pulleys from NST with great results since day one.

NST also sponsors two drift cars participating in the professional US drift series, Fromula Drift. Both of these cars have been using NST pulleys with no issues of any kind for the past few seasons.

We could go on and on...

Is a solid crank pulley harmless to all engines? No it is not. Small, super high reving engines, when modified way past the simple bolt on stages may have problems. These engines reach critcal harmonics, past the 10,000 rpm range, an rpm often reached by certain race engines.

A mildly modded inline six will most likely be fine but one subjected to high rpm for long periods of time (90% of its life) with lots of boost will probably suffer. In this case , the stock balancer/damper is probably not adequate either.

Some of the older american V8 engines are externaly balanced and it is critical not to use a solid hub pulley not designed for these applications, or damage to the engine could result.

Our engines and most around here do not fall into the above catagories. Rest assured that your engines will not blow up and die or have a reduced life in street and even racing use with these parts.

I would bet that every "expert" that tells you otherwise has little personal, practical, real world experience with the subject.

Again, I understand that your cars are a very large investment and that you depend on them as your daily means of transportation, so I do not take your questions personally. However, this is the fourth time I have addresed this on YarisWorld. If I have to post this info once a month in this same thread, I will continue to do so. I do not take pride in building junk. No NST product is junk. No NST product is designed to cause you any harm or grief. I am not in business to sell junk. PERIOD.


Motorhead6T5NorCal · Aug 2, 2007#207
Well you got a good sales pitch and all,but unless you have measured bearing clearances on the crank on high mileage 1nz-fe's and then compared it to normal wear on a engine with the same amount of miles with the pulley,its all speculation and crossing fingers. Road race cars are not expected to live long lives and typicaly don't if they are taken far from stock. So saying the thing lives though road racing is not the type of thing I'm talking about. I'm Talking about spinning a bearing at 120k and being out a motor,loss of oil pressure etc. I'm not claiming to be an "expert",I do however work on engines and know their function.😉
ChinoCharlesOH · Aug 2, 2007#208
Originally Posted by Motorhead6T5 ↑
Well you got a good sales pitch and all,but unless you have measured bearing clearances on the crank on high mileage 1nz-fe's and then compared it to normal wear on a engine with the same amount of miles with the pulley,its all speculation and crossing fingers. Road race cars are not expected to live long lives and typicaly don't if they are taken far from stock. So saying the thing lives though road racing is not the type of thing I'm talking about. I'm Talking about spinning a bearing at 120k and being out a motor,loss of oil pressure etc. I'm not claiming to be an "expert",I do however work on engines and know their function.😉
Everyone appreciates your concern, but when the president of a company who has spent his entire life working on pulleys and only pulleys takes time out of his day to type a lengthy and thorough reply to your post and you come back to say your mind was made up before he said anything... I don't know man. There is a difference between an expert and a home garage gearhead, and Mike is the expert here.
NonStopTuningThread starterUSA · Aug 2, 2007#209
Originally Posted by Motorhead6T5 ↑
Well you got a good sales pitch and all,but unless you have measured bearing clearances on the crank on high mileage 1nz-fe's and then compared it to normal wear on a engine with the same amount of miles with the pulley,its all speculation and crossing fingers. Road race cars are not expected to live long lives and typicaly don't if they are taken far from stock. So saying the thing lives though road racing is not the type of thing I'm talking about. I'm Talking about spinning a bearing at 120k and being out a motor,loss of oil pressure etc. I'm not claiming to be an "expert",I do however work on engines and know their function.😉
You are absolutely correct. I know you are not an expert, nor have I ever claimed to be an expert of any type. I have only worked with pulleys in one way or another for almost a decade, and I have only about 100 different applications listed on my website.

You should take everything I say and throw it into the trash, I am only here to sell you a product 🤷

You should not take my word for anything. Visit the following message boards and see if you can find any customers who have ever had any problems with any NST products. Find ONE person....

www.YarisWorld.com
www.8thCivic.com
www.ScionLife.com
www.houston240sx.com
www.ziptied.com
www.dailyDrifter.com

Search those forums or any other website where people have actually used NST pulleys over the past however many years. See if you can find anyone who has had any problems with any NST product.

It is your car and you should do with it as you see fit. You should never follow anyone blindly, nor should you base your beliefs or values based on what so called "expert" friends of friends tell you in local muffler shops!
Motorhead6T5NorCal · Aug 2, 2007#210
Fair enough,Like I said before I have only heard great things about your products,I only have great things to say about your product thats on my car.
NonStopTuningThread starterUSA · Aug 22, 2007#211
Do we have any new NST users with new reviews? Updates from current users? Any other questions/comments?
eTiMaGoBangkok, Thailand · Aug 22, 2007#212
small update, something people might find useful, my beslt used to squeak a lot after installing the pulley. But that was because I turned on the air conditioning soon after turning on the engine, and the extra drag would cause the belt to slip and squeak.

So the solution, wait till you're moving to turn on the air conditioner, it's probably better for the engine in the long run anyway 😉

You could also probably resolve this through tightening the belt by rotating the alternator slightly upward, but I have not been able to loosen the damn bolts 😆

Apart from that, I am more than happy with my crank pulley, and can't wait to be able to get the rest of the family 😉
Doc ZaiusOttawa, ON, Canada · Aug 23, 2007#213
I am fully enjoying my NST quickshifter. Tight and crisp! 👍
cstsMontreal · Sep 3, 2007#214
Hey everyone this is my first post here

I have two noob questions concerning the pulleys 😳

1st: I live in Montreal, Canada and our winters can get quite cold. Will it have any extreme effects on the pulley due to the aluminum construction?

2nd: will it mess in any way with the warranty?

Thanks :)
OgDoggPhoenix, AZ · Sep 3, 2007#215
Originally Posted by Sabretooth ↑
I want my A/C to blow a whole 2mph faster on max AC speeds!!!

I demand Lighweight A/C pully now!

Actually I dont see why not, it would just mean more $$ in the bank for NST!!
I would buy, but the point is not to use A/C while in High Performance use.
I live in the desert and my a/c is ALWAYS on. I think if this piece were to be built, it'd motivate me to do the entire pulley set. :)
ShijimaCanada · Sep 3, 2007#216
Originally Posted by csts ↑
Hey everyone this is my first post here

I have two noob questions concerning the pulleys 😳

1st: I live in Montreal, Canada and our winters can get quite cold. Will it have any extreme effects on the pulley due to the aluminum construction?

2nd: will it mess in any way with the warranty?

Thanks :)
I cant answer number one, But would definitly like to know the answer.

Two however, if your engine breaks down, I can guarantee if you have the pulleys on, and the dealership sees that, they will void your warranty and blame the pulleys.
NonStopTuningThread starterUSA · Sep 3, 2007#217
Originally Posted by csts ↑
Hey everyone this is my first post here

I have two noob questions concerning the pulleys 😳

1st: I live in Montreal, Canada and our winters can get quite cold. Will it have any extreme effects on the pulley due to the aluminum construction?

2nd: will it mess in any way with the warranty?

Thanks :)
Good questions.

1. We use a grade of aluminum which is what the aircraft industry and NASA (cold space adventures) use in building certain components. We then HARD anodize our pulleys for extra strength. No, the main purpose of anodizing is not to make your pulley look pretty. Companies that tell you bare aluminum pulleys are just as strong as anodized ones should not be dealt with.

2. There is a US act called the Moss Act. Basically it states that ANY aftermarket component can be used, and can not void warranty, unless said component can be proven beyond doubt to have caused specific failure related to that area of the car.

2b. I have found through personal experience that dealer service managers will take very good care of their customers when the customers are professional and mature with their attitudes and behavior. Individuals who go to dealerships and act like the dealer owes them the world will be refused for the smallest of issues, others will not.
NonStopTuningThread starterUSA · Sep 3, 2007#218
Originally Posted by OgDogg ↑
I live in the desert and my a/c is ALWAYS on. I think if this piece were to be built, it'd motivate me to do the entire pulley set. :)
Such a pulley would cost more than three times that of the crank pulley. The OEM a/c pulley has a clutch mechanism built into the pulley and unfortunately this design is very costly.

1. I would not feel comfortable asking you to fork over $350 for one single pulley which will not improve your performance.

2. I would not feel comfortable building 100 pieces when 97 of them would sit on the shelves for the next 3 years 😲

I suggest spending your $350 on the pulleys we currently offer, and saving the other $350 for other goodies which will make your car much more enjoyable. Better yet, save it in your "what will NST build next" savings account. 😉
Motorhead6T5NorCal · Sep 3, 2007#219
As far as the warranty is concerned,they will typicaly restrict your warranty if they see parts. The whole warranty won't be voided but the pwertrain might be. And like NST said there is the act that puts the burden of proof on the dealer. Yet your warranty will be restricted before you ever get any of it sorted out. Then I assume you would have to go to court and get a court order making them reverse the restriction. Which is more than a pain for most people with daily lifes with jobs. The car companys have great lawyers too. So their are law on the books to defend us,its no cake walk though. If you modify your car,its better off to assume that your warrany will be voided. Chances are,I don't think they would notice the pulley,if you are concerned get the grey one,so it won't stand out like a a sore thumb.

Edit: If for instense you had an engine problem,I would put the stock pulley back on then they wouldn't ever know. Thats what the mustang crowd does,they get new motors and transmissions all the time by putting their car back to stock before taking it in. Even if you have to pay to have it put back to stock by a shop, its worth it to not eat the cost of a motor or trans.
cstsMontreal · Sep 4, 2007#220
Thanks for the answers!
aucoriumSouth Africa · Sep 13, 2007#221
wasup guys, i have just asked my buddy in the USA to order me a Crank pulley , he is comming to South Africa in October and bringing it with for me, i cant wait to feel the improvement!!
aucoriumSouth Africa · Sep 16, 2007#222
Hi NST! i would like to know , i have the 1300cc yaris , it has the aircon unit running on the same belt as the crank pulley and obviously the alternator , thie crank pulley will still work and wont cause any adverse effects??I ask cause i have already ordered mine and only noticed that now , stupid me i know , but i dont see that it cant work , experts, what you recon???
eTiMaGoBangkok, Thailand · Sep 16, 2007#223
The aircond also works on this pulley with the 1.5L engine, as long as the actual crank pullley is the same, there should be no problem
aucoriumSouth Africa · Sep 17, 2007#224
Originally Posted by eTiMaGo ↑
The aircond also works on this pulley with the 1.5L engine, as long as the actual crank pullley is the same, there should be no problem

shot buddy , how u doing? how was the holidays?u must post pics if you got👍
NonStopTuningThread starterUSA · Sep 18, 2007#225
Originally Posted by aucorium ↑
Hi NST! i would like to know , i have the 1300cc yaris , it has the aircon unit running on the same belt as the crank pulley and obviously the alternator , thie crank pulley will still work and wont cause any adverse effects??I ask cause i have already ordered mine and only noticed that now , stupid me i know , but i dont see that it cant work , experts, what you recon???

Unfortunately we have not been able to test the CR-Lite with the 1300cc Yaris, as we do not have any here in the USA. We have however, sold several of these pulleys to 1300 owners internationally and these customers have never reported any problems. My understanding is that the 1500 and 1300 both share the same crank pulley. You should have no problems.

👍
JerkrattFair Lawn, NJ · Sep 18, 2007#226
here is a picture of mine the Crank pulley is blue.. ill get an uploase picture in a sec after i pick up my brother in law from school
Picture not included in this copy

this is what the stock looked like... if u can see it i circled it in red
Picture not included in this copy
NonStopTuningThread starterUSA · Sep 18, 2007#227
From the ChinoCharles CR-Lite DIY guide...

DIY: Nonstop Tuning CR-Lite Pulley

Picture not included in this copy

Picture not included in this copy
Black YarisToledo, OH · Sep 18, 2007#228
That stock crank pulley is one heavy unit... NST FTW!
AstromanWenatchee, WA · Sep 18, 2007#229
You could use the stock pulley as ballast on a hot air balloon 😆
intakeitaly · Sep 19, 2007#230
how much gain is expected on a new yaris 1300?
AstromanWenatchee, WA · Sep 19, 2007#231
Come on october Picture not included in this copy
NonStopTuningThread starterUSA · Sep 27, 2007#232
Come on October. Can't get here fast enough.
NonStopTuningThread starterUSA · Sep 27, 2007#233
Originally Posted by intake ↑
how much gain is expected on a new yaris 1300?

Roughly 3-5 HP and 3-5 TQ throughout the entire rpm band 😁
NonStopTuningThread starterUSA · Oct 19, 2008#234
WOW! something like 20 pages of user reviews and comments are gone!!!
AstromanWenatchee, WA · Oct 19, 2008#235
Yeah, not cool. Maybe some can be rescued from google??
YodaFL · Oct 19, 2008#236
pff my whole post count is gone now... o by the way i will be ordering my pulley within the week 🙂
largeorangefontSo Cal, OC · Oct 19, 2008#237
Originally Posted by NonStopTuning ↑
WOW! something like 20 pages of user reviews and comments are gone!!!
You don't need 20 pages to tell people this is a quality product, and adds a bit more power. 🙂
NonStopTuningThread starterUSA · Oct 19, 2008#238
Originally Posted by largeorangefont ↑
You don't need 20 pages to tell people this is a quality product, and adds a bit more power. 🙂
You're absolutely correct. And thank you!!!
But it is still disappointing none the less.
NonStopTuningThread starterUSA · Oct 19, 2008#239
Originally Posted by Yoda ↑
... o by the way i will be ordering my pulley within the week 🙂
AWESOME!!!

jronaldSoutheast Asia · Oct 20, 2008#240
INFO for Thailand Yaris:

The alternator pulley is different than US version.

The rest is sooooo goooood!
So much better for throttle response and engine REV up.
(I've post it before and I don't mind posting it again now)..

NST FTW!
NonStopTuningThread starterUSA · Oct 20, 2008#241
Originally Posted by jronald ↑
INFO for Thailand Yaris:

The alternator pulley is different than US version.

The rest is sooooo goooood!
So much better for throttle response and engine REV up.
(I've post it before and I don't mind posting it again now)..

NST FTW!

Thank you, I appreciate it.

I don't remember the exact number, but I believe this thread used to be just over 40 pages long.

I have personally spent hours and hours in this thread to converse with all of you, answer your questions, build a reputation for our products and services, etc etc, using this thread.

It is very sad to see all of this work go to waste, and I know many of the other supporting vendors agree with this point of view.

In any case, we will move on and try to rebuild with your help.

NST FTW 👍👍
battleversiontc808 · Oct 20, 2008#242
i cant wait to get mine just ordered them then i gotta find a header still undecided on that one
1NZYaris1New Zealand · Oct 20, 2008#243
Thank you NST
I am now the proud owner of your 10% under drive pollie + waterpump & alternator pullies.
They make a real differance to the response of the throtle,and fuel economy.

By the way my Yaris is a 1300 👍
lamdogPerth Australia · Oct 20, 2008#244
ordered a 10% underdrive pulley from garm last week...
looking forward for it :D
NonStopTuningThread starterUSA · Oct 20, 2008#245
Thank you guys, please keep the reviews coming.

Those of you who posted in the past and had your feedback erased in the recent hacking, please feel free to post here again. In fact, I encourage it!
YodaFL · Oct 23, 2008#246
Hey i got the money dont kno which pulley to get :( i plan to maybe sc later(2 years from now) on so do i get the cr-lite or underdrive? and wats the differnce between them...
tk-421Dagobah · Oct 23, 2008#247
Originally Posted by Yoda ↑
Hey i got the money dont kno which pulley to get :( i plan to maybe sc later(2 years from now) on so do i get the cr-lite or underdrive? and wats the differnce between them...
You should get the underdrive IMO. It works on both NA and FI setups.
battleversiontc808 · Oct 23, 2008#248
i ordered mine through cali yaris cant wait for this weekend to get them and install them
YodaFL · Oct 24, 2008#249
how much?
battleversiontc808 · Oct 24, 2008#250
$250 shipped his website is microimageonline.com check it out