Yarisworld Archive

NST (NonStopTuning) Pulleys. Info, Specs, User Data...

634 posts · 271,668 views · page 3 of 13

Replies continued

NonStopTuningThread starterUSA · May 21, 2007#101
Originally Posted by curik ↑
when is the pulley set coming out????????????
We need to do a bit of testing with these pieces before releasing them to the public. You guys can expect new NST pulleys sometime in July 😁

http://www.nonstoptuning.com/pKitToyYaris.htm

Picture not included in this copy

👍
Black YarisToledo, OH · May 21, 2007#102
what pulley are planned for the set?
ChinoCharlesOH · May 21, 2007#103
Water pump and alternator to go with the crank pulley they already sell.
Black YarisToledo, OH · May 21, 2007#104
sorry... i need to learned how to read
ShijimaCanada · May 21, 2007#105
Sweet, I should be getting my yaris around july/august. Just in time for the pulleys.
AstromanWenatchee, WA · May 21, 2007#106
Woo-hoo! Now I know how much to save up 👍
YarisGuyUSA · May 22, 2007#107
Originally Posted by YarisGuy ↑
ZPI CRACKED PULLEY FTL
Picture not included in this copy

NST ANODIZED PULLEY FTW
Picture not included in this copy

😎

And I found another one! This is a cheap ass OBX pulley for the 1NZ Scion xB.
Cheap junk pulleys FTL
Picture not included in this copy


I have never seen anything like this ever happening to any NST product. This stuff only further explains the old saying, "you get what you pay for."

NST FTW 🤘
GalavoxxSan Francisco · May 22, 2007#108
I'm an NST man all the way but you also have to wonder how much of that is installer error. Maybe the belts were way too tight or the pulley bolt was over torqued. That just looks nasty.
ChinoCharlesOH · May 22, 2007#109
You have to remember, it is a part that may be spinning at thousands of RPM's when it fails, turning it into a bonafide Dreidel of ultimate despair! I'll bet the side of his block is all jacked up too!

Not a part to skimp on if you ask me.
tk-421Dagobah · May 22, 2007#110
OK... I guess I'm convinced. Now all I need to know is wether I should wait for the pulley set to come out or not. Sure, I understand that it's better to support our vendors ASAP so they can come out with products sooner and allathat, but I'm kinda wary about messing with the motor too many times.
I would much rather install the whole set once and be done with it.
kurokoma-kunmy own little world · May 22, 2007#111
Originally Posted by ChinoCharles ↑
...bonafide Dreidel of ultimate despair!
AHAAHAHAHAHAHAAAAHAA you are funny mofo chino
MudBugAZ, USA · May 22, 2007#112
Installed mine today and the first thing I noticed was that it idles at higher RPMs than it did.

I didn't notice the idle being rough.

It does seem like the shift is smoother now (AT).
ChinoCharlesOH · May 31, 2007#113
NST @ SCION EXPO 2007

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

8 attachments not included in this copy

cali yarisCanoga Park, CA · Jun 2, 2007#114
ok, I'm in!
Just ordered from Dezod.... hope you have red, 'cause the website didn't say "no"....
SabretoothSt Cloud FL · Jun 3, 2007#115
I will be definatly ordering the full set, (Crank/WP/Alt.) pulleys when they come out, Red all the way.

Do we estimate how much HP we will get with the full set?
NigalPiqua, Ohio · Jun 3, 2007#116
I was looking at the pullies in my car the other day while changing oil. How hard is a pully set to install? It looked reeeeeal tight in there. I don't think I could fit my big dickbeaters in there to do it.
tk-421Dagobah · Jun 3, 2007#117
Originally Posted by Nigal ↑
I was looking at the pullies in my car the other day while changing oil. How hard is a pully set to install? It looked reeeeeal tight in there. I don't think I could fit my big dickbeaters in there to do it.
A simple search in the DIY forum will turn up this:
DIY: Nonstop Tuning CR-Lite Pulley

Good luck!
OxyG3nEMontreal , Quebec , Canada · Jun 4, 2007#118
is it going to be less expensive to buy it in a set or its the same to buy it appart;..
nigelHK · Jun 5, 2007#119
does the pulley work on other car with 1nz FE engine?
my dad also want to get one for his corolla with 1nz fe engine
sdmfchicago · Jun 5, 2007#120
Originally Posted by nigel ↑
does the pulley work on other car with 1nz FE engine?
my dad also want to get one for his corolla with 1nz fe engine
arent the corolla's powered by 1zz fe's? but the asian corolla is 1.6L
sdmfchicago · Jun 6, 2007#121
bump, i want my alt. and water pump pulley already
with nst quickshifter
cali yarisCanoga Park, CA · Jun 6, 2007#123
I am told these are back ordered until July 1.... boo!

I'll wait tho....would never ever order "that other company's" pulley 😉
NonStopTuningThread starterUSA · Jun 6, 2007#125
Hi again everyone,

Wow, it looks like there has been a lot of good discussion here lately. This is turning into a very productive thread with some great information.

Here is a little info regarding fitment on the 1.5, 1.3, Yaris, Corolla, etc. There are two versions of the 1NZ crank pulley...

One version, on cars with NO power steering pulley, is a SINGLE-ROW Crank Pulley.
Example: USDM Toyota Yaris 1NZFE... Just one row there...
Picture not included in this copy

Another version, on cars equipped with a power steering pulley, is a TWO-ROW Crank Pulley.
Example: Scion xA and xB 1NZFE... See the two rows there?
Picture not included in this copy


Those of you with a USDM Yaris, and those internationally who have SINGLE-ROW Crank Pulleys can order pulleys from our Yaris page on our site...
http://www.nonstoptuning.com/pKitToyYarisPics.htm

Those of you internationally, and those with TWO-ROW Crank Pulleys can order pulleys from our Scion xA page on our site...
http://www.nonstoptuning.com/pKitToySciXAXB.htm

As always, thank you for all your support and enthusiasm. I don't post on any other forums, but I really do enjoy visiting your forums from time to time 👍
cali yarisCanoga Park, CA · Jun 6, 2007#126
can you confirm that they are back ordered until July 1?
OxyG3nEMontreal , Quebec , Canada · Jun 6, 2007#127
i have power steering so i need the second pulley
NonStopTuningThread starterUSA · Jun 6, 2007#128
Originally Posted by cali yaris ↑
can you confirm that they are back ordered until July 1?
Our website has been designed and is constantly updated, with you the customer, in mind. Our pages include product info, pics, availability, etc...

http://www.nonstoptuning.com/pKitToyYaris.htm

We are currently working on several new things for the Yaris, you may want to take a look around 👍
Doc ZaiusOttawa, ON, Canada · Jun 6, 2007#129
Originally Posted by OxyG3nE ↑
i have power steering so i need the second pulley
Hey man... our power steering is electric... it's not driven by the pulley, so you need the first one, the one that we all got during the group buy! 👍

Mike: is there any chance of making custom 5 or 6 groove pulleys for the 1NZ-FE for anybody who would be interested in the Jackson Racing Rotrex supercharger? Thanks!!
OxyG3nEMontreal , Quebec , Canada · Jun 6, 2007#130
this is what i was asking myshelf :p
NonStopTuningThread starterUSA · Jun 6, 2007#131
Originally Posted by Doc Zaius ↑
Mike: is there any chance of making custom 5 or 6 groove pulleys for the 1NZ-FE for anybody who would be interested in the Jackson Racing Rotrex supercharger? Thanks!!
Excellent question Doc!

NST is one of the very few companies who has the ability and experience to build custom one-off pulleys. We do custom work for race cars from time to time and would be more than happy to build those customers who need them, special order pulleys.

👍
sdmfchicago · Jun 7, 2007#132
my dreams are coming true!!!! now to hunt down a rotrex supercharger
kurokoma-kunmy own little world · Jun 7, 2007#133
Installed mine last weekend, got a little over 200 miles on it now. Like others have said, faster, smoother acceleration, a good bit more bite in the bottom of 2nd gear, also much smaller "hole" in the top of 2nd/3rd. GREAT $100 mod--looking forward to NST releasing the rest of the set.

About the torque thing though--earlier post said less rotating mass means less torque, but it feels like more... How does less force to get the thing spinning affect torque? Or am I just confused about how torque works? Only explanations I can find online have too many mathematical equations... 😕🤷😕
NonStopTuningThread starterUSA · Jun 7, 2007#134
Originally Posted by kurokoma-kun ↑
Installed mine last weekend, got a little over 200 miles on it now. Like others have said, faster, smoother acceleration, a good bit more bite in the bottom of 2nd gear, also much smaller "hole" in the top of 2nd/3rd. GREAT $100 mod--looking forward to NST releasing the rest of the set.

About the torque thing though--earlier post said less rotating mass means less torque, but it feels like more... How does less force to get the thing spinning affect torque? Or am I just confused about how torque works? Only explanations I can find online have too many mathematical equations... 😕🤷😕
Thanks for the kind words! Your experience only adds to what others have been saying up to this point, and we are happy to hear more positive feedback.

And regarding your torque question, take a look at some of our dyno testing we have done on different applications. You can see that the entire power band has been shifted up at every point in the RPM band. NST kits provide more HP and more TQ at every point you look at. Less rotating mass on the engine itself will always lead to such results...

ACURA TSX
Picture not included in this copy

Picture not included in this copy

INFINITI G35
Picture not included in this copy

LOTUS ELISE (has some of the lightest OEM pulleys I have ever seen!)
Picture not included in this copy

Picture not included in this copy


Don't forget, NST is the only company building pulleys that is actively involved in testing products in RACE CARS. We have several NST sponsored cars in pro road racing and drift series accross the USA.

Our products are built and tested on race cars as well as street cars. We do not build products unless they provide real world gains that we can clearly observe in our testing.

3 attachments not included in this copy

tk-421Dagobah · Jun 7, 2007#135
Originally Posted by NonStopTuning ↑
Thanks for the kind words sir.
Actually, I believe this sir is a ma'am.

Excellent info on the dyno runs.
Just had a good chat with Mike@NSTonAIM. Excellent costumer service!
NST FTW!
kurokoma-kunmy own little world · Jun 7, 2007#136
Originally Posted by tk-421 ↑
Actually, I believe this sir is a ma'am.
It's ok, politeness is always welcome! 🙂

Thanks NST for posting the dyno sheets! I do understand what these mean--I was just getting confused about how torque numbers are derived, could not read rotational mass/acceleration equations; guh, all those greek symbols! 😛
tk-421Dagobah · Jun 7, 2007#137
Originally Posted by kurokoma-kun ↑
It's ok, politeness is always welcome! 🙂
Well, at least he didn't call you a dude... 😆
gaffonorman · Jun 8, 2007#138
Originally Posted by ChinoCharles ↑
The best bit of advertising a company can do is to ship durable, high-quality products on time produced exactly to customer spec. NST does it and has been doing it for years... unlike the other guys, who can't even weld a proper exhaust. 🙄

You people defending you-know-who all over these forums spit in the face of two of our members who received shit products and shit service. I for one have more respect for our membership than to lend my support to an undeserving company.

They bought their way onto Scionlife and I'll be damned if they do the same here! If they want my respect, they can earn it. NST already has. Have yet to see one person buy an NST product and not be satisfied.


I have a Yaris on order - can you elaborate or point me to a relivant thread about "you-know-who" so I can understand what company and products you are refering too??

thanks!
curikIndonesia · Jun 11, 2007#139
I am confused now, don't all new yaris have the same crank pulley regardless of it is USDM or AUDM or JDM model? I can't check what the Thai built yaris has single or double row crank pulley yet as I am still in Australia. Anyone can clear it out? Thanks
ChinoCharlesOH · Jun 11, 2007#140
gaffo, research ZPI thoroughly.

curik, the reason for the confusion is that we are referring to different engines in different countries. In Europe, for example, there are 1.0L, 1.3L, and 1.5L Yarii. The NST crank pulley only works for the 1.3 and 1.5.
nigelHK · Jun 11, 2007#141
Originally Posted by ChinoCharles ↑
gaffo, research ZPI thoroughly.

curik, the reason for the confusion is that we are referring to different engines in different countries. In Europe, for example, there are 1.0L, 1.3L, and 1.5L Yarii. The NST crank pulley only works for the 1.3 and 1.5.
it works on all 1nz fe engines, right?
ChinoCharlesOH · Jun 11, 2007#142
All 1NZ engines with electronic power steering. That is all Yarii with 1.5L's AKAIK.
curikIndonesia · Jun 14, 2007#143
waiting for the pulley set .................................................. ............. !!
AstromanWenatchee, WA · Jun 14, 2007#144
NST, are there any plans for a group buy on the next pulley set? If there is, count me in! 🤤
curikIndonesia · Jun 14, 2007#145
Yep count me in too! By the way since all the pulleys are Lite pulleys, that means everything is the same as stock size pulleys but much lighter?
curikIndonesia · Jun 22, 2007#147
Sorry if this is a basic knowledge. Is that the Water pump pulley? If it is then it must weighs a lot, and upgrading it to NST means a significant reduction?

Picture not included in this copy
ChinoCharlesOH · Jun 22, 2007#148
curik,

That is the a/c compressor pulley. The water and alternator pulleys are located just above it. It certainly does weigh a lot. Other than the crank pulley that is the largest pulley on the 1NZ. If you are planning on tracking the car, the solution that would bring the highest power gain would be to outfit your engine with NST pulleys, find the proper size belt and bypass the a/c compressor altogether. For track purposes it is only leeching your power. Swapping the belt out would only take a matter of minutes, and the benefits of not running your a/c compressor when racing are very tangible. You will feel a difference.
curikIndonesia · Jun 22, 2007#149
Thanks for the excellent explanations Chino! Since the A/C pulley looks massive, why doesn't NST make a replacement for it as well? I mean, it looks more parasitic than the WP or ALT pulleys together.
cali yarisCanoga Park, CA · Jun 22, 2007#150
correct me if I'm wrong, but the A/C pulley is on a clutch that is directed by the ECU when to turn "on" and "off"? I think this makes it problematic to re-engineer for aftermarket use.