Yarisworld Archive

NST (NonStopTuning) Pulleys. Info, Specs, User Data...

634 posts · 271,668 views · page 4 of 13

Replies continued

AstromanWenatchee, WA · Jun 22, 2007#151
You're not wrong, but NST has already said they are not making a A/C pulley. The pulley set will be for the alternator & water pump. Their post is on here somewhere about it. 🙄
OxyG3nEMontreal , Quebec , Canada · Jun 22, 2007#152
ive not seen a lot of performance car with A/C ... lol
YarisGuyUSA · Jun 24, 2007#153
Track only race cars do not have a/c systems at all. And like others have said, if you want to build yourself a hardcore street car you will eventually end up taking your a/c out to save a few pounds of dead weight.

I have the NST crank pulley now and I'm anxiously waiting to get the alternator and water pump pulleys later this summer. I don't think I could ever go without my a/c during the summer heat!
curikIndonesia · Jun 24, 2007#154
We are going off topic slightly here, I was wondering if there are issues for making a lightweight A/C pulley that make it not possible to do. It looks like the 2nd heaviest pulley in the whole system and why doesn't NST consider making it at all?
SabretoothSt Cloud FL · Jun 24, 2007#155
I want my A/C to blow a whole 2mph faster on max AC speeds!!!

I demand Lighweight A/C pully now!

Actually I dont see why not, it would just mean more $$ in the bank for NST!!
I would buy, but the point is not to use A/C while in High Performance use.
curikIndonesia · Jun 24, 2007#156
I agree with you Sabretooth, but sometimes we want to maximize performance with the least sacrifice in comfort. So if NST makes the A/C pulley, putting a whole pulley kit on a completely stock yaris will be a significant addition in performance and fuel economy. However there will always be trade off like increase in vibration, but this is minor and I am sure it is worth the trade off.
OxyG3nEMontreal , Quebec , Canada · Jun 24, 2007#157
do a search. they allready told us why they have not planned to built a/c pulley
curikIndonesia · Jun 25, 2007#158
I must be a noob at searching. Mind to provide a link oxyg3ne?
kurokoma-kunmy own little world · Jun 25, 2007#159
Originally Posted by curik ↑
I must be a noob at searching. Mind to provide a link oxyg3ne?
See post #34--took a few minutes to find I admit, the search function returns SO many results sometimes 😛
NST (NonStopTuning) Pulleys. Info, Specs, User Data...
fu_im_from_texasTexas · Jun 25, 2007#160
Originally Posted by ChinoCharles ↑
The best bit of advertising a company can do is to ship durable, high-quality products on time produced exactly to customer spec. NST does it and has been doing it for years... unlike the other guys, who can't even weld a proper exhaust. 🙄

You people defending you-know-who all over these forums spit in the face of two of our members who received shit products and shit service. ...
Chino...
how can you comment on a vender's performance? you are forgetting a few simple facts:

1) you made an attempt to manufacture an intake...
2) you made time-lines (promises?) your time-line was continually "adjusted"
3) you made promises of a dyno sheet...

instead of slamming zpi, focus your energy fulfilling your promises...

btw... your attempt at making an intake was an honorable one... and no one made the claim that you "spit in the face" of YW members...if they did, they were wrong...

dispite failures, zpi has not spit in anyone's face ... get off your high horse...


🤮
kurokoma-kunmy own little world · Jun 25, 2007#161
Originally Posted by fu_im_from_texas ↑
get off your high horse...
...and onto your LONG horse!

Sorry for jacking the thread, everyone just seems so angry today, maybe it's just me... 🙁
tk-421Dagobah · Jun 25, 2007#162
Originally Posted by kurokoma-kun ↑
...and onto your LONG horse!

Sorry for jacking the thread, everyone just seems so angry today, maybe it's just me... 🙁
Well, it is a monday, after all... 🙄
cali yarisCanoga Park, CA · Jun 25, 2007#163
ZPI spit in my face, so there. neener, neener.

As for race cars/street cars and A/C, my 443 whp track-prepared Scion tC still has the A/C. I'll remove it if (1) I stop driving on the street or (2) Global warming reverses and Southern California never tops 80 degrees. 😉
YarisGuyUSA · Jun 25, 2007#164
Originally Posted by fu_im_from_texas ↑
Chino...
how can you comment on a vender's performance? you are forgetting a few simple facts:

1) you made an attempt to manufacture an intake...
2) you made time-lines (promises?) your time-line was continually "adjusted"
3) you made promises of a dyno sheet...

instead of slamming zpi, focus your energy fulfilling your promises...

btw... your attempt at making an intake was an honorable one... and no one made the claim that you "spit in the face" of YW members...if they did, they were wrong...

dispite failures, zpi has not spit in anyone's face ... get off your high horse...


🤮
I don't think comparing any board member to a company that has been around for several years is correct. But since you did it, be it directly or indirectly, I will do a comparison of my own.

1) Last time I checked Charles did not take any member's money to build this intake. He tried it on his own dime.

2) ZPI is a company that "builds" products and was paid by members here who ordered a product that should have been tested extensively prior to being released. What did these members get? Products that did not fit, despite returns and adjustments.

3) ZPI does not have any dynos for their products either. And they have no solid record of doing anything productive for YW. Last we heard was that they were ignoring customer e-mails.

ChinoCharles has many posts and threads in which he has done 100X more for this community by spreading knowlege, giving others ideas and assistance. More than almost any company that has come to these forums.

CC has put up a DIY for the crank pulley, he has had at least some sort of hand in getting NST to build new pulleys. He even helped get the ball rolling on a new SSK.

Meanwhile, ZPI has been hiding away because of their bad reputation.

Picture not included in this copy
ZPI CRACKS FTL

No thanks, I won't be coming down my horse anytime soon.

😈
Black YarisToledo, OH · Jun 25, 2007#165
Originally Posted by Sabretooth ↑
I want my A/C to blow a whole 2mph faster on max AC speeds!!!

I demand Lighweight A/C pully now!

Actually I dont see why not, it would just mean more $$ in the bank for NST!!
I would buy, but the point is not to use A/C while in High Performance use.
Originally Posted by curik ↑
We are going off topic slightly here, I was wondering if there are issues for making a lightweight A/C pulley that make it not possible to do. It looks like the 2nd heaviest pulley in the whole system and why doesn't NST consider making it at all?
Originally Posted by curik ↑
I agree with you Sabretooth, but sometimes we want to maximize performance with the least sacrifice in comfort. So if NST makes the A/C pulley, putting a whole pulley kit on a completely stock yaris will be a significant addition in performance and fuel economy. However there will always be trade off like increase in vibration, but this is minor and I am sure it is worth the trade off.
If one is so concerned about shaving weight the A/C compressor would be gone, the A/C pulley it's self does not weigh much it is the cluch that has all the weight. Even if there was a lightened AC pulley you would be adding the weight right back on by reinstalling the clutch so the AC will function properly, and has anyone else here changed a compressor clutch with out breakin open the system? it does not look fun on our car... A lightened AC pulley would be a useless mod, like color matched piston rods
YarisGuyUSA · Jul 2, 2007#166
Does anyone know how much the complete A/C system might weigh?

.
curikIndonesia · Jul 2, 2007#167
It's July! How's the news on the ALT and WP pulleys?
cali yarisCanoga Park, CA · Jul 2, 2007#168
color matched piston rods
LOL, good one
WRBluenorcal · Jul 2, 2007#169
Originally Posted by YarisGuy ↑
Does anyone know how much the complete A/C system might weigh?
Generally, an A/C system weighs about 40-50lbs for EVERYTHING. The compressor itself is usually about 30lbs. Then you have the condensor, all the lines, coils, heat exchanger, dryer, etc.
reznuntSocal · Jul 2, 2007#170
Originally Posted by curik ↑
It's July! How's the news on the ALT and WP pulleys?
X2!
YarisGuyUSA · Jul 5, 2007#171
My guess is they'll release specs on the ALT and WP pulleys after they ship the new SSKs. Maybe we should start a YW betting pool?! 😁
NonStopTuningThread starterUSA · Jul 23, 2007#172
Picture not included in this copy

The NST CR-Lite is now back in stock and ready to replace your crappy OEM pulley! Anyone else in the mood to try one out? 😁
Black YarisToledo, OH · Jul 23, 2007#173
can we still get one shipped with our SSK if we get payment to ya on monday?
NonStopTuningThread starterUSA · Jul 23, 2007#174
Originally Posted by Black Yaris ↑
can we still get one shipped with our SSK if we get payment to ya on monday?
Absolutely! A few of your fellow board members have already done this 🙂
ChinoCharlesOH · Jul 23, 2007#175
Just swinging in to say NST FTW! If you don't have this pulley yet, what are you waiting for?
Black YarisToledo, OH · Jul 23, 2007#176
no more waiting.... :)
JerkrattFair Lawn, NJ · Jul 23, 2007#177
when the water pump and alt pulleys??
NigalPiqua, Ohio · Jul 23, 2007#178
Originally Posted by ChinoCharles ↑
Just swinging in to say NST FTW! If you don't have this pulley yet, what are you waiting for?
They make that much difference, do they?
AlphaFoxSpringfield, Mass · Jul 23, 2007#179
Originally Posted by Nigal ↑
They make that much difference, do they?
the crank pully has been the most noticeable mod, in terms of power gained. so, yes, it does make quite a difference! 👍
eTiMaGoBangkok, Thailand · Jul 23, 2007#180
It's hard to quantify the power gained if any, but the engine did increase in responsiveness, it revs up and down noticeably faster, my whole shift timing was too slow after changing it.
whooppee777Maryland · Jul 23, 2007#181
i'd like to do this mod, but i'd like to know if there are any cons to this type of mod. does anything get worn out from changing pulleys? changing pulleys changes the cam timing right? how hard is the install? i know theres a diy guide for iton here somewhere i jus want a straight answer from someone who has done it.
whooppee777Maryland · Jul 23, 2007#182
so i read every lil facet about pulleys on nst's website and these lite pulleys are the same diameter as the oem pulleys so they dont change timing in any way, right? its because they dont weigh as much as the oem pulley that makes better use of the engines output. am i right?
Black YarisToledo, OH · Jul 23, 2007#183
Originally Posted by whooppee777 ↑
so i read every lil facet about pulleys on nst's website and these lite pulleys are the same diameter as the oem pulleys so they dont change timing in any way, right? its because they dont weigh as much as the oem pulley that makes better use of the engines output. am i right?
size size just lighter, so less rotational mass = better MPG and more HP transfered to the ground because less is being waisted trying to sping the hevier pulley
NonStopTuningThread starterUSA · Jul 23, 2007#184
Crank Pulleys and accessory pulleys have nothing to do with cam timing, whether they be underdrive, overdrive, or simply light weight variants. The concept is in regards to the rotating assembly and the transfer of horsepower between the crank shaft and the accessories which translate this horsepower into the services they provide. ie the alternator, a/c, etc.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Adjustable Cam Gears, also called cam pulleys by some, are directly attached to the camshafts and allow the individual tuner to change the timing of the camshafts, thereby changing the powerband of the engine. Adjustable cam gears are usually used in conjunction with aggressive aftermarket camshafts and wouldn't do much for mildly modified engines.

Picture not included in this copy


Feel free to look for me on AOL Instant Messenger at the screen name NSTonAIM should you wish to chat about any of our products in further detail. I would be happy to be at your service.

NST FTW FE&EMFs 🤘
whooppee777Maryland · Jul 23, 2007#185
my problem is i have a dumb ass friend who works on cars, who has an accord with a turbo h22 engine, that thinks he knows everything about cars. and my dumb ass listens to what he says sometime and he told me it will change the timing. this coming from some one who works at a local monroe shop, and works on peoples cars while stoned.
DezodWestern NY · Jul 26, 2007#186
NST rocks!

We are a proud NST distributor and have MORE stock coming in!
cali yarisCanoga Park, CA · Jul 26, 2007#187
I got my pulley on today, and there is a nice bump in low-to-midrange. Can't feel much when winding it up, but that's fine.

My only tiny gripe about this pulley is the timing notch is too small, barely there really. Won't matter much until smog time, though, since the car tunes itself. Overall, VERY nice product.
cali yarisCanoga Park, CA · Jul 26, 2007#188
are the other two pulleys available yet?
ChinoCharlesOH · Jul 26, 2007#189
They are being researched as we speak. Look for the GB coming soon!
RUBBERDIPSTICKCincinnati, OH · Jul 27, 2007#190
I'm onboard with the other pullys...lets do this
JerkrattFair Lawn, NJ · Jul 27, 2007#191
im on ti waiting for the GB lol
NonStopTuningThread starterUSA · Jul 27, 2007#192
Start looking under your couch cushions, in your ashtrays, and old jean pockets boys and girls. New pulleys are a comin! 😁
ShijimaCanada · Jul 27, 2007#193
I found $135.00 in Change in my room today, its going to be the start of my pulley fund.
cali yarisCanoga Park, CA · Jul 28, 2007#194
I've been stealing from my son every time I do the laundry.... that's my pulley money.
jdiumHillsboro · Jul 28, 2007#195
I understand that it might not be a good thing for vendors or NST to post a dyno chart of before/after, unless the results are premium, but I'd love to see what the real world results of this are...hopefully somebody has access to a dyno for after the GB...gotta see if this is just doing a mod to do a mod...
ChinoCharlesOH · Jul 28, 2007#196
Originally Posted by jdium ↑
I understand that it might not be a good thing for vendors or NST to post a dyno chart of before/after, unless the results are premium, but I'd love to see what the real world results of this are...hopefully somebody has access to a dyno for after the GB...gotta see if this is just doing a mod to do a mod...
NEW GROUP BUY: Yaris NST Crank Pulley (NonStopTuning)

Scroll down on the first page and you'll see dyno sheets from an Acura TSX and Lotus Elise. If NST can make power on a Lotus, you think they can handle your Yaris?
jdiumHillsboro · Jul 28, 2007#197
Originally Posted by ChinoCharles ↑
NEW GROUP BUY: Yaris NST Crank Pulley (NonStopTuning)

Scroll down on the first page and you'll see dyno sheets from an Acura TSX and Lotus Elise. If NST can make power on a Lotus, you think they can handle your Yaris?
That's what I want to see 1st. The Lotus graph looks terrible, what happened at 6k? As for handling my Yaris, I'm sure it's worth a little hp, but I wanna see the curve. I'm also sure that Toyota wouldn't leave more than a couple hp on the table in a market that is so closely matched.
whooppee777Maryland · Jul 28, 2007#198
Originally Posted by cali yaris ↑
I've been stealing from my son every time I do the laundry.... that's my pulley money.
😆 is he serious?
ShijimaCanada · Jul 28, 2007#199
Why wouldent he be, obviously his son doesnt want it!
NonStopTuningThread starterUSA · Jul 28, 2007#200
Gains and dyno results can vary on different cars based on several factors. Supporting mods, weather, humidity, sea level, etc. But most sport compacts that have been tested show gains of about 6-10hp and torque increases with an NST pulley kit. Based on those experiences we can probably expect gains of about 5 HP and TQ on the 1NZ.

NST Pulley Kits provide very good throttle response, and they provide good power gains accross the entire RPM band. Usually an intake, exhaust, or header will only provide gains in one area, maybe the lower, or the higher power band, or maybe just at peak power points. Pulleys shift the entire power curve UP. Meaning the gains are always there. This is in part due to the great weight reduction in the rotating assembly.

Please take a look at the following... These are the results we've seen in some of our testing. ALL cars were 100% bone stock. Before and after runs were done on the same day, same dyno, within a few hours of one another. Some of these cars were even Auto Transmission cars. As you can see, the NST curves are higher than the OEM curves at every single point on the power band...


Automatic 2004 Infiniti G35. Bone stock...

Picture not included in this copy


Automatic 2006 Acura TSX. Bone stock...

Picture not included in this copy

Picture not included in this copy


Manual 2005 Lotus Elise. Some of the lightest OEM pulleys ever produced...

Picture not included in this copy

Picture not included in this copy


This one is a 2006 Manual Civic Si. This one was sent to us by one of our customers in South America...

Picture not included in this copy


We have absolutely nothing to hide, nor are we in the business of producing and shoving junk down anyone's throat! I have been working with pulleys in one way or another for the past 10 years and pulleys are what I do 24/7. I take A LOT of pride in what I do, and would not take pride in building junk!

We do not post garbage information, nor do we try to make claims of 11hp and 18tq like some of our competition 🤮
We give you real world estimates seen from real world testing that we have done on real world cars. R&D, test, R&D, test some more, enjoy.


Thanks to all of you who have supported NST thus far. I certainly do appreciate it very much. Good luck and have fun with all your projects!