Yarisworld Archive

Want to build costom turbo kit. Need advice from boosted guys!

610 posts · 163,166 views · page 9 of 13

Replies continued

pimp my yarisThread starterchicago · Jul 7, 2011#401
Originally Posted by aruester ↑
Great job pimp! It took a couple days but I read the whole thread lol. I will be starting my Turbo project one day soon and it will be my first so this was VERY enlightening!

Does ur glove box still open? That is a very clean install from the looks!! I like!
Yes the Glove box still opens, but there is a hole cut in the pocket behind both of the guages for clearance and wiring. I dont use it anymore.
pimp my yarisThread starterchicago · Jul 7, 2011#402
I installed a new spoiler that I ordered on E-bay from China. It was actual plastic [not fiberglass] and its working well. Not to big and not to small, I think. Also towed some friends to a track day with there bikes. With so much weight on the back of the weeee Yaris it sounds like a diesel truck with the turbo. Still had plenty of pull though. One tough car! 👍

3 attachments not included in this copy

pimp my yarisThread starterchicago · Sep 18, 2011#403
Going on a ride today with some friends from Supra forums. Going to some twisty roads to a state park for a little picnic and bullshiting. My friends Supra is pushing 932 ponies to the rear wheels. His turbo is the size of a large dinner plate. His girl friends supra is pushing 420 to the rear wheels with a single turbo conversion. Must be nice to have money. Im sure I will be the only turbo Yaris there, but Im gonna represent! 😁
YodaFL · Sep 18, 2011#404
Do it n take pics
pimp my yarisThread starterchicago · Sep 18, 2011#405
Well our Picnic got rained out and postponed to next sunday. I still took pics of some sweet rides.

4 attachments not included in this copy

PETERPOOPOahu · Sep 19, 2011#406
MKIVs :)
pimp my yarisThread starterchicago · Oct 5, 2011#407
Removed my exhaust manafold today and repaird a exhaust leak caused by a stripped manafold bolt. I stripped the bolt hole when the first turbo manafold I had installed cracked. Becaused of the hard to see location of the manafold, I originally thought it loosened up causing the gasket to leak. I overtightened the bolts. I later found the manafold had cracked causing the leak. Garm at Micro Image warrantied the cracked manafold and sent a new one. The new one is working well. I have put off this repair all summer because of the heat and I was not looking forward to installing a helicoil in such a tight location behind the engine.
Well its done and I think it worked out ok. I even installed a new oem manafold gasket. While I was in there I also cranked up the boost a little. Its about 9.5 psi now. I will post later how this all works out. 🤷
cali yarisCanoga Park, CA · Oct 6, 2011#408
Excellent, can't wait to hear more.
pimp my yarisThread starterchicago · Oct 16, 2011#409
I was planing on getting some dyno testing this week but my stock clutch is starting to slip. Not horrible yet. But it is definitely slipping. I may need to swap it out before it gets to cold out. Going to do some internet shopping.
YodaFL · Oct 16, 2011#410
Mine has already started to slip. Think I gonna put up back my exhuast casue I am having some boost creep. Sigh should have went external wastegate lol.
pimp my yarisThread starterchicago · Oct 17, 2011#411
Sigh should have went external wastegate lol.[/QUOTE]

Me to
pimp my yarisThread starterchicago · Oct 21, 2011#412
Well my clutch can no longer hold up at all. My car has gotten more power then ever now that temps. have got colder. If I nail it in 3-5 gears my clutch will break loose and freewheel, and it will bounce off the rev limiter.

So today I took my trans. out and inspected my flywheel. It still looks ok and hasent turned blue yet. I have heavy duty F1 stage 3 clutch I ordered last week. Tomarrow I will install. Today my back is killing me!😢
Stay tuned.

4 attachments not included in this copy

pimp my yarisThread starterchicago · Oct 21, 2011#413
pics

4 attachments not included in this copy

ParmasML · Oct 22, 2011#414
Oh my... its seems you have some work to do to clear up the mess...

Hope all goes fine.... btw whats about the internal wastegate? I am running with it with no problems at all at least on 10psi
pimp my yarisThread starterchicago · Oct 29, 2011#415
New clutch is in and I have been driving for about 100 mi now. My pedal pressure is good only slightly harder to push then stock. It is a little grabby and takes some getting use to. It does not slip at all now on the highway. I am still working on smooth starts. The friction disk is very sticky, but I think its still breaking in. I am going for a Dyno run on Tuesday. I am hoping for 200whp.

2 attachments not included in this copy

pimp my yarisThread starterchicago · Oct 29, 2011#416
Originally Posted by Parmas ↑
Oh my... its seems you have some work to do to clear up the mess...

Hope all goes fine.... btw whats about the internal wastegate? I am running with it with no problems at all at least on 10psi
My internal wastegate wont open till about 12 psi and I had to add a extra spring to pull the wastegate open sooner. I wish I would have got an external wastegate with a 7PSI spring and a dump tube to vent it.😁
cali yarisCanoga Park, CA · Oct 29, 2011#417
Nice. Can't wait to see some dyno pulls. Great work so far. 🙇
pimp my yarisThread starterchicago · Nov 1, 2011#418
Went for a dyno run today. One run was 183whp and one run was 181whp. My spark seemed to cut out before the rev limiter and it was running a little rich. Still not bad. I was hoping for 200 though. Of coarse he printed me the lower hp run. So here it is. Time for a junk yard motor buid up with pistons and rods and mabe some porting for the head.🤷

video:http://www.youtube.com/watch?v=V-Y028Aw4HA

1 attachment not included in this copy

YodaFL · Nov 1, 2011#419
finally Nice job! what psi was this at?
pimp my yarisThread starterchicago · Nov 2, 2011#420
Originally Posted by Yoda ↑
finally Nice job! what psi was this at?
About 9.5psi. I am making some tuning changes and I am going to buy some new spark plugs. I just payed mycar off on monday. More money to toy with.😁
ParmasML · Nov 3, 2011#421
That is a nice result out there.... remind me... is the engine still stock internally?

Mine is running 211bhp on 10psi .... stock head and no porting. Also mine is at 184 torque.

If it's still stock I would not rev it hard with that power
ShinareOklahoma City, OK · Nov 3, 2011#422
is it cheaper to buy a new lump than beef up a stock one? I mean, if you blow up your engine, whats the loss? A few hundred dollars? hehe
cali yarisCanoga Park, CA · Nov 3, 2011#423
^ If you throw too much boost at it, it could blow up VERY fast -- it's a hassle to swap engines often, unless you have a crew. 😉

Further, you can build a motor to handle boost better than stock e.g., lower compression pistons.
pimp my yarisThread starterchicago · Nov 3, 2011#424
Completely stock, I have been driving it hard. I dont think I will raise the boost without a rebuild.
ShinareOklahoma City, OK · Nov 3, 2011#425
What I've gatherd among boosted guys around here that 6-8 psi is a good range for stock daily drivers. Enough "oompf" for fun yet not too hard on the engine. Is that a good conclusion?


http://shop.microimageonline.com/ZAG...S-Zage-tky.htm
somday it will be mine... oh yes... it will be mine.
cali yarisCanoga Park, CA · Nov 3, 2011#426
^ Yes.
pimp my yarisThread starterchicago · Dec 14, 2011#427
Took the weeeee Yari down to Miami for a week. Pulled my trailer with my motorcycle and did some riding around south beach and keys. I am glad to say I did not have any problems. The car ran great. I brought many tools and my lap top for emergency retuning if needed. I did not touch any of that. The turbo got a hell of a work out over the mountains. I did need to have a much quiter muffler welded on in Florida before the ride home. My cherry bomb style muffler just about drove me insane on the drive down. I was wearing ear plugs and still got a massive headache. I think I will pull the intake tube off and check those bearings soon. I was never able to drive with the trailer over mountains with the cruise control on before. It maintained 75mph or more all day. Sounded like diesel truck too. Awsome 😁

2 attachments not included in this copy

TURBO YARISUSA · Dec 14, 2011#428
Im in Miami if you want to meet up. Also I can take you to the best muffler shop in town. They have a mandrel bend machine & can make anything you need.
fnkngrvIn The Hotbox · Dec 14, 2011#429
Originally Posted by TURBO YARIS ↑
Im in Miami if you want to meet up. Also I can take you to the best muffler shop in town. They have a mandrel bend machine & can make anything you need.

I love the work the shop did that Carlos sent me to and they were great for customer service.
pimp my yarisThread starterchicago · Dec 16, 2011#430
Thanks for the offer. I already had a 2.25" Trush turbo muffler welded on. It was some discount muffler place. They charged me 90$ and did a great job. I was able to drive home without loosing my mind.
wildcardMissouri · Dec 16, 2011#431
Please for the love of god get that poor bike some better tires than those shinko's.
pimp my yarisThread starterchicago · Feb 2, 2012#432
10 psi still going. Just wanted to post some pice of my blow off recirc. setup. Not the best looking but it works great. Also in the turbo pics. U can see the brace I put on to support the weight of the turbo. It drops down from the bottom of the down pipe.

3 attachments not included in this copy

yaris2010RSAngus, Ontario · Feb 4, 2012#433
it took me about 3.5 hours but i finally read and completly understood just about everything. lol

Great write up and great help/advice from others. i will hopefully be starting my install in about 2 weeks and this thread made things alot clearer.
pimp my yarisThread starterchicago · Feb 5, 2012#434
Its all worth it. It will make your car a blast to drive. I always get a thumbs up from the turbo neon guys and Subie wrx owners. Its so much fun smoking those turbo coopers.
yaris2010RSAngus, Ontario · Feb 5, 2012#435
where did u hook up your bov vacume line to?
pimp my yarisThread starterchicago · Feb 10, 2012#436
I put a vaccume T off the evap. purge solinoid. The line attaches on the intake near the throttle body.
cali yarisCanoga Park, CA · Feb 10, 2012#437
t took me about 3.5 hours but i finally read and completly understood just about everything. lol
You are ready, young padawan....
pimp my yarisThread starterchicago · Mar 22, 2012#438
Made A big move yesterday and cranked up the turbo to 12psi. Hade to make a competely new map for my FIC. Old map was only good to 10psi. Its was running VERY STRONG for about an hour of very hard driving. Then I noticed the AFR's were getting a little lean. I will do some retuning if possible. I may need more fuel system upgrades at this power level. Possibly new rail with a return line or even lager injectors? The good news is I am no longer using that jimmy rigged pull spring on my wastegate as my boost controller.
Bluevitz-rsOshawa, Ontario, Canada · Mar 22, 2012#439
Boy you're getting brave. Do you have a spare motor just in case?
YodaFL · Mar 22, 2012#440
Originally Posted by pimp my yaris ↑
Made A big move yesterday and cranked up the turbo to 12psi. Hade to make a competely new map for my FIC. Old map was only good to 10psi. Its was running VERY STRONG for about an hour of very hard driving. Then I noticed the AFR's were getting a little lean. I will do some retuning if possible. I may need more fuel system upgrades at this power level. Possibly new rail with a return line or even lager injectors? The good news is I am no longer using that jimmy rigged pull spring on my wastegate as my boost controller.
Before you continue do a compression test so we can see what it is before 12. Your rods are goona be the first thing to go. Careful you don't burn up the exhaust valves that can make it show lean sometimes. And Dyno that thing so you can brag about it🎉
pimp my yarisThread starterchicago · Apr 16, 2012#442
Did another dyno run at Sound Performance in Bensenville Il. They squezzed me in on a Buick dyno shootout on saturday. I pulled 197whp on a mustang dyno. They typically read 5% lower then Dynapac dynos.
cali yarisCanoga Park, CA · Apr 16, 2012#443
OH yeah, nice!
why?harnett county NC · Apr 17, 2012#444
that is awesome.
Focus_Sh1ftNew Jersey · Apr 17, 2012#445
So ridiculous... I would have never thought our engines could put down so much power stock.
SchizopreniaSurabaya, Indonesia · Apr 19, 2012#446
Originally Posted by pimp my yaris ↑
OK I finally did some work to eliminate my smoke problem on cold engine starts. The problem has been getting progressivly worse as the weather gets colder. Their has been a lot of talk about where the oil return enters the pan. I dont believe that is the problem. But I admit its a possibility. My oil return was submerged in oil in the lower part of the pan. So this weekend I removed the right side axel and relocated the return to the top of the pan above the oil level. I also switched from a 1/4npt fitting and a 3/8in hose to a more free flowing 3/8npt fitting and a 1/2in hose. The thing is huge. For sure if I continue to have a cold start smoke problem, I know it will not be the return. I have finished the work and just need to fill with fluids tomarrow after my silicone drys on my oil pan. I will also take a pic. tomarrow.
how hard is it to remove the axel?
pimp my yarisThread starterchicago · Apr 21, 2012#447
Originally Posted by Schizoprenia ↑
how hard is it to remove the axel?
Not to hard. You must remove right front wheel. Then remove the bolt on the spindle that clamps the lower ball joint to the spindle. Then you must remove the nut that holds the axel in the center of the front hub. I believe its 30mm and must be a twelve point socket. Then slide the axel out of the front hub and slide the ball joint out of the spindle. Then you can pull the rotor hub and caliper can be pulled out of the way and tied up. Then using a pry bar you can pop the axel out of the transmission. Drain transmission fluid out first or it will be messy. Muake sure if the axel needs to be hammered out of the front hub the threads are not damaged. Air tools and a compressor make this job much easier.
pimp my yarisThread starterchicago · Apr 21, 2012#448
Well a couple of days ago I was driving to the grocery store and when I was leaving my neighborhood I nailed the gas in second gear. The tires broke loose and kept spinning until about 50mph. When I let of the gas and shifted into third gear I heard a loud knocking noise tied with rpm. I pulled over and saw no oil leaking. I drove home with the noise as the damage had already been done. I thought for sure I spun a rod bearing. I drained the oil and saw no metal chips in my oil.👍 So then I did a compression test, 3cyl. at 155 to 160psi and 1cyl. at 95psi. Mystery solved. I slapped a valve at high rpm. Now I have a bent valve.😢

I am now working on removing my cyl. head. I also bought a used 80k mile motor from a local junk yard for 350$. I am going to put the head on my car, so I can get back on the road for now.

Then I am going to order pistons and rods for the short block soon so I can start on a higher boost motor. Goal 275-300hp
fnkngrvIn The Hotbox · Apr 21, 2012#449
for some reason they don't like 25+ psi either.
pimp my yarisThread starterchicago · Apr 21, 2012#450
? Who is making performance valve springs besides Ferrea. 1000$ for valves and spring is a little stiff. And stock seem a little weak for my extended high RPM abuse.