Yarisworld Archive

Want to build costom turbo kit. Need advice from boosted guys!

610 posts · 163,166 views · page 7 of 13

Replies continued

Focus_Sh1ftNew Jersey · Nov 30, 2010#301
Thanks for the pics 👍

Yeah I really can't explain what's happening. Suddenly my tune was a whole point richer than what I had tuned for. Today I reset codes, plugged in the O2 sensor briefly, then unplugged it. Now I'm back at my expected AFRs. My O2 sensor might be shot as well because I got P2237 after it was in for awhile (open circuit). I've got another 2 years until emissions so no biggie 🙂

And Carlos, if both you AND Garrett end up being wrong about the return... I don't even know WHAT to think. 😛
Focus_Sh1ftNew Jersey · Nov 30, 2010#302
Originally Posted by cdydjded ↑
Cmon! Its not just me & Garrett, its 99.9999% of the boosted world out there that have their returns above the oil line. Why must we piss against the wind?
So I'm the .0001%? I need to get with the times. 😎

I was worried about the whole froth thing, because it did make sense, but after seeing this it's clearly a non issue.
pimp my yarisThread starterchicago · Nov 30, 2010#303
Originally Posted by cdydjded ↑
PIMP: Im glad you changed you set up. Noticed you are coming out of the turbo with a 90 deg, why dont you clock the cartridge so you could come straight out? It would be alot better.
If you check that artical from Garrett's web sight, at the bottom it says turbo oil inlet-outlet should be within 15 degrees perpendicular to the ground. I have my turbo clocked so its exactly perpendicular. Thats so oil does not pool in the cartrige. Could cause more smoke
PETERPOOPOahu · Nov 30, 2010#304
let's hope in the car.
fnkngrvIn The Hotbox · Nov 30, 2010#305
I was thinking of mounting mine in the front license plate area...that would be cool.....














if you believe this I have some awesome Ocean Front property in Oklahoma.
pimp my yarisThread starterchicago · Nov 30, 2010#306
Mine is behind glove box door under dash. Their is a factory hole with a rubber plug just above factory ECM. This is where I ran my wiring. I drilled a second hole next to it for vaccume line to FIC.
pimp my yarisThread starterchicago · Nov 30, 2010#307
What spark plugs are U guys running? And what gap?
Focus_Sh1ftNew Jersey · Dec 1, 2010#308
Mine's also under the glove compartment.

Originally Posted by pimp my yaris ↑
What spark plugs are U guys running? And what gap?
I've been wondering this too... How important is it that I change to spark plugs more ideal for a FI application? I was under the impression it really didn't matter.
PETERPOOPOahu · Dec 1, 2010#309
copper plugs or Iridium plugs
pimp my yarisThread starterchicago · Dec 1, 2010#310
I just installed some NGK BKR7E plugs. They did not have the iridium BKR7EIX in stock and they were 10$ each. I will see how these work.😁
PETERPOOPOahu · Dec 1, 2010#311
What gap did you set?
pimp my yarisThread starterchicago · Dec 2, 2010#312
Unfortunatly I could not find my plug gapper, so I installed strait out of package after looking them over.
pimp my yarisThread starterchicago · Dec 24, 2010#313
For a long time I have had a occasional missfire under heavy load or full accel. I removed the spark plugs I installed previously and closed the gap to about half. I wanted to see if the smaller gap would lessen the load on the ignition coils, and it worked. No more missfire. It would cause a big jerk when it happened. Im sure the correct fix would be a stronger ignition system, but no flow for that now. Its nice when the car feels reliable like oem just with more power.
cali yarisCanoga Park, CA · Dec 24, 2010#314
I removed the spark plugs I installed previously and closed the gap to about half
I'm glad it worked, but I suggest you gap those with a tool when you have a chance.
ilikericesavannah, ga · Dec 25, 2010#315
yeppers, i gapped my ngk vpower plugs at .22, i had that same problem. boost was blowing out my spark at full boost. was getting a jerk and misfire under hard acceleration. FYI, this was on my crx with 10psi, not my yaris
Focus_Sh1ftNew Jersey · Dec 25, 2010#316
AWESOME. This is just the information I was looking for. Recently I've been having the same problem but it has become more noticable. I always thought it was the transmission jerking because it always happens shortly after a shift into 3rd(?), but this sounds more likely. The sudden loss in power is a huge buzz kill.

I'm gonna swap my plugs. Recommendations? Thinking I'm going to get the same plugs if those are the one's that are a step colder than stock.
ilikericesavannah, ga · Dec 26, 2010#317
i used vpower ngk for all my honda engines. personal preference, but hope one of these other toyota boosted guys will share thier thoughts on plug preferences.
pimp my yarisThread starterchicago · Dec 30, 2010#318
NGK's should be used on any asian brand car. Nippon Denso's can be used if NGK is not available. And no matter what dont ever use Bosch. You will have nothing but headaches and missfire problems. And Champions are only for lawn mowers and chryslers.
Bluevitz-rsOshawa, Ontario, Canada · Dec 30, 2010#320
Originally Posted by pimp my yaris ↑
NGK's should be used on any asian brand car. Nippon Denso's can be used if NGK is not available. And no matter what dont ever use Bosch. You will have nothing but headaches and missfire problems. And Champions are only for lawn mowers and chryslers.
I've had bosch platinum 4's in my car for 30 000 km now with no problems. But on the other hand I'll be going back to NGK or Denso when these are done. the price isn't worth it.
victorddrToRonTo · Jan 9, 2011#321
This is a very interesting post, I spent almost 3.5hrs to finish the whole thread.

What the total you spent so far?

I wish I can build a nice and budget turbo like you did. Too bad it can't be happen until I buy-back my leasing Yaris (1 more Year from now)

Hopefully you guys will have a perfect tuning with FIC by that time.....
pimp my yarisThread starterchicago · Jan 10, 2011#322
With piggy back and exhaust I would say about 2000 to 2200 bones
TRD_Turbo_YazzaUK · Jan 11, 2011#323
get the scion turbo upgrade thats for the same engine in the yaris and then put a bigger turbo n intercooler on yu get the whole kit then
victorddrToRonTo · Jan 14, 2011#324
Originally Posted by TRD_Turbo_Yazza ↑
get the scion turbo upgrade thats for the same engine in the yaris and then put a bigger turbo n intercooler on yu get the whole kit then
Do you have some spec and pricing for that turbo kit? Very interested.
victorddrToRonTo · Jan 14, 2011#325
Originally Posted by pimp my yaris ↑
With piggy back and exhaust I would say about 2000 to 2200 bones
Can you post a summarized list for the parts that you purchased for this project since it hard to flip through the whole thread again!!🙇

I think I will start gathering the parts through out this year, so by next year I can start mine once I the car off... (Limited Cash FLow🤷)
pimp my yarisThread starterchicago · Jan 18, 2011#326
[QUOTE=victorddr;547664]Can you post a summarized list for the parts that you purchased for this project since it hard to flip through the whole thread again!!🙇

Exhaust manafold
Turbo
Oil feed and drain line for turbo
Assorted fittings to attach oil and coolant lines to turbo
Coolant lines for turbo
Intake piping turbo to intercooler
Intake piping intercooler to throttle body
Intercooler
Turbo exhaust flange
Custom downpipe with flex fitting
Custom exhaust
Blow off valve or recirc valve
Piggy back computer IE: Greddy E-manage, AEM FIC
Bigger injectors if running more then 6 PSI
pimp my yarisThread starterchicago · Jan 18, 2011#327
My exhaust manafold CRACKED! Now I have a exhaust leak under the hood and I am being gassed when stopped at idle. It is worst when the engine is cold, and gets a little more quite when the exhaust is hot and expanded. I took pics after removing my 35$ turbo heat sheild. Heat sheild is now shredded, its only good for one use. Forgot cable to attach camera to puter. Garm I hope your listening, this is from your store. I will send a message to you soon. 😢
pimp my yarisThread starterchicago · Jan 18, 2011#328
Ok I just got a call back from Garm (Cali Yaris) at Micro Image. And he said he will warranty my manafold and cover shipping to return the cracked manafold. Thats A-one service in my book. I understand shit happens and parts break, but its much less of a hassel when the seller stands behind there product. 👍
YodaFL · Jan 18, 2011#329
good hear man!
Bluevitz-rsOshawa, Ontario, Canada · Jan 18, 2011#330
👍 for Micro Image
👎 for "shit happens"
PETERPOOPOahu · Jan 18, 2011#331
TOO MUCH POWER!
YodaFL · Jan 18, 2011#332
Originally Posted by PETERPOOP ↑
TOO MUCH POWER!
What?NEVA!!!!!!!!!!!!!!! MORE POWAAAAAAAAAA😳
Focus_Sh1ftNew Jersey · Jan 19, 2011#333
Here's your problem:

I drive it like I stole it. Floored several times a day.


... Or is it the solution? 😁
cali yarisCanoga Park, CA · Jan 19, 2011#334
going out today, but you didn't answer my email yet: "Do you have the mani with the external wastegate flange?"

And an important question: Are you using anything to limit engine movement?
pimp my yarisThread starterchicago · Jan 19, 2011#335
Originally Posted by cali yaris ↑
going out today, but you didn't answer my email yet: "Do you have the mani with the external wastegate flange?"

And an important question: Are you using anything to limit engine movement?
E mail answered. I do not have anything to control engine movement but I do have a mesh flex fitting on my downpipe to allow engine twist. I have been looking for somekind of brace or arm for the top of the motor to control twist but I haven't found anything. What are U using Garm? And lets see it on your web store soon.
pimp my yarisThread starterchicago · Jan 19, 2011#336
Pics of cracked manafold. Garm is sending new mani. made by someone named Dezod. Hopefully it wont require to much modification. Its going to be 9 degrees here on friday. 😲

3 attachments not included in this copy

Bluevitz-rsOshawa, Ontario, Canada · Jan 19, 2011#337
Do you know anyone with a welder that could run a quick beed along some of the crack to seal it up for now?

I did that for a friend and got him through for a few months before he got a new manifold. Did it right on the car.
pimp my yarisThread starterchicago · Jan 20, 2011#338
Ya I might have to do that. I dont know if the new manafold will mount the turbo in the same place and same position. I dont want to deal with fabricating a new down pipe in the middle of winter.
YodaFL · Jan 21, 2011#339
Yo pimp how where your afrs with the exhaust leak? Where you lean at idle and cruise?
pimp my yarisThread starterchicago · Jan 23, 2011#340
Originally Posted by Yoda ↑
Yo pimp how where your afrs with the exhaust leak? Where you lean at idle and cruise?
Very lean at idle and not much change at cruise. When the manafold gets hot it expands and the leak gets smaller and is not so loud. When cold, U can hear it poping under the hood. Its been sub zero here at night and very cold. I hope I can change to new manafold sent from Garm on thur. and fri. it should get up to 33 degrees. Heat wave!!🤣
fnkngrvIn The Hotbox · Jan 23, 2011#341
Originally Posted by pimp my yaris ↑
it should get up to 33 degrees. Heat wave!!🤣
that is balmy for this time of year in Chi Town
pimp my yarisThread starterchicago · Jan 24, 2011#342
Here are some pics of the new manafold. Im not sure if it will work without a new down pipe. The flange where the turbo mounts up has been welded a little crooked, as seen by the ruler in the picture. It doesn't look like much but the angle will be very exaggerated by the length of the downpipe. It may not meet up with the exhaust center pipe. If that is the case I will need to have the old manafold welded as a temporary fix until the weather warms up and I can have a new 2.5" downpipe fabricated. My current downpipe is 2.0".🙁

4 attachments not included in this copy

cali yarisCanoga Park, CA · Jan 24, 2011#343
^ have to ask Dezod, they made this batch.
ShinareOklahoma City, OK · Jan 26, 2011#345
sux dude. I can hear your frustration/disappointment in your voice. Can you get a better bearing and fix what you got or is it just garbage now?
Focus_Sh1ftNew Jersey · Jan 26, 2011#346
Shit man, I feel for ya. Hopefully your engine is going to be alright 🙁

If you got the cash, now would be a better time than ever to get a 2554r.
YodaFL · Jan 26, 2011#347
Ahhh shit that means mine is next to go FFS. Time to start saving. Would atleast thought I could get a year out of it first... Dang!
pimp my yarisThread starterchicago · Feb 1, 2011#348
Well my car is back to stock now. Today it turned into a snow plow on my way back home from work in this BLIZZARD. Now its thunder lightning and snowing outside. Really fucked up. I dont think the Yaris will make it to work tomarrow. Its just to low!
cali yarisCanoga Park, CA · Feb 2, 2011#349
well crap, sorry about that. Can you publish the eBay link or seller's name or whatever to others know which turbo this was?

Hope you can get boosted again when your weather gets better!
Nexus1155Dorchester · Feb 2, 2011#350
Please do post a link, it would be much appreciated. China turbos are hit or miss unless its from a reputable place.