Replies continued
Focus_Sh1ftThread starterNew Jersey · Aug 28, 2010#151Alrighty, rough draft of my install guide is done. It's a LONG read, but should be an interesting one. 👍
Anybody that has some time available - read it and give me feedback please. 😉
I'm also working on a pre-install guide that includes hooking up some gauges, the AEM FIC, apexi turbo timer, and anything else that comes to mind.
Also - the install guide is a .docx. I changed the extension because YarisWorld wouldn't let me upload a .docx? So if it doesn't open, change the extension. Obviously, you need Word 2007 as well.
Videos and more pictures... Expect them tomorrow. 😁
2 attachments not included in this copy
Nexus1155Dorchester · Aug 28, 2010#152I skimmed it over, is this guide going to ZAGE? Looks pretty in depth though which is good. LOL I like the use of gaybolt.jpg.. I don't know if you were trying to, but you might want to try to embed the pics? I don't know if you did because Word did something funny with converting the file, but yeah I'll read it when i get back from the garage.
PETERPOOPOahu · Aug 28, 2010#153Congrats! You did what most people wouldn't and couldn't do (including me)! Dyno that puppy and upload some videos.:)
YodaFL · Aug 28, 2010#154woot happy for you man GOOD JOB!!!!
why?harnett county NC · Aug 28, 2010#155lol, welcome to the joys of a turbo car. Just make sure there is enough oil and coolant, and enjoy!
Focus_Sh1ftThread starterNew Jersey · Aug 28, 2010#156 Originally Posted by
Nexus1155 ↑ I skimmed it over, is this guide going to ZAGE? Looks pretty in depth though which is good. LOL I like the use of gaybolt.jpg.. I don't know if you were trying to, but you might want to try to embed the pics? I don't know if you did because Word did something funny with converting the file, but yeah I'll read it when i get back from the garage.
Yeah word really was a poor choice, I really wanted to embed the pictures but it was a nightmare... Probably gonna make a PDF or something. The guide will be going to zage, but I'm going to post it up here as well. I'm hoping with a guide that's super in depth, maybe it'll sway some people to take the plunge like I did. It's much more reassuring to do something you know that has been done successfully... and nerve-racking when you're the one entering the uncharted waters first. 😉
Really though, how many turbocharged Yaris' are there in the states currently with me included, five?
Also, thanks a lot for the cheers of joys guys, but apparently I'm not quite there yet...
Was driving to work today, oil idiot light started flashing and then stayed on, accompanied by a CEL. I'm still leaking oil BAD. Had to stop and buy 4 quarts of oil. Immediately threw 2 in. Had to throw the third in on the way home. Hopefully I was prompt enough in dealing with it. I was watching my oil pressure closely and was getting worried... sure enough.
So, it's time to stop beating around the bush and deal with this the right way. I have all day available to me tomorrow, so the turbo + downpipe will be coming out. 🙁
This time around, I'll seal the banjo bolt + washers, return flange, return gasket, return bolts, etc. with silicone sealant. I really should have done this the first time around, but I had no idea this was going to happen. Will also inject the turbo with the crappy oil I had to buy and look for leaks. If anyone else has any other ideas or thinks silicone is going to suck for this use, let me know immediately.
On the positive side, I was able to (hopefully) drive this thing without doing any damage, so it'll be a lot easier to be patient now. I still can't even begin to describe how much fun it is to drive this car. I swear, everytime I see the needle on my boost gauge pass the 0, I get such a huge smile lol. Between my exhaust and turbo, the noise and feeling when you hit the throttle.. is intoxicating
On a side note, I felt it was time to change my ride details. 👍
pimp my yarischicago · Aug 29, 2010#157Sounds awsome. Congrats Jerzy you got the jump on me. My pocket book is holding me back right know and Im currently looking for someone to weld up my stainless steel down pipe.
That banjo fitting shouldnt need any sealent. Their should be one copper washer on each side on the bajo. For a total of two. These washers get squeezed when tightening down the bolt and the washers get slightly deformed to make a perfect seal between the banjo bolt, banjo line and your turbo. This line is under 60 psi of oil pressure. Thats what most toyota's put out. Their is no silicone or jb weld in the world that will seal that.
Make sure their is one copper washer between the line and the top of the bolt and one between the line and the turbo. This line should be snug and not crazy tight! If the washers are to deformed or squeezed out of place they will not seal.
Also make sure the threads in the turbo and the bolt are not cross threaded or stripped. If the washers do not look like washers anymore because they have been overly squeezed, replace them. Make sure you buy copper washers from a decent auto parts store. Steel washers will not work. These copper washers also seal the brakes lines on your car. They hold over 1000 psi. So if its done right they will hold that 60 psi of oil with no problems and no sealent. Not to sound like a ass, but i have been a mechanic for a long time at several different dealer ships. Please throw out that JB weld. Its whats called a temperary fix to a permanent problem. Its time consuming and a pain in the ass to remove the turbo and check all this shit but you will be so happy when you can cruise all over and not worry about oil leaks.
Best of luck Jerzy. I also want to see a video of this thing trowing down some rubber for insperation.👍
stevethegimpTucson, AZ · Aug 29, 2010#158Very great thread and it has really pushed me into pulling the trigger on installing a turbo into my hatch in the next 1.5 months. I'm really hoping microimage comes out with a kit soon but if not i'll probably be shooting for a zage kit as well!
Focus_Sh1ftThread starterNew Jersey · Aug 29, 2010#159 Originally Posted by
stevethegimp ↑ Very great thread and it has really pushed me into pulling the trigger on installing a turbo into my hatch in the next 1.5 months. I'm really hoping microimage comes out with a kit soon but if not i'll probably be shooting for a zage kit as well!
Thank you for continuing to fuel my ego boost, give my rough draft a read and see if there's anything that seems unclear 😁😁
pimp_my_yaris, you don't sound like an ass at all lol. There's a reason I post here, and it's to tap into the knowledge of actual mechanics and people with this kind of experience. With that said, I want to point out the banjo bolt is, in fact, leaking. With what you said about the copper washers though, I'm inclined to think it's leaking from where the bolt threads into the turbo. Hopefully it'll become more apparent when I take it off. The return leak is still a total mystery as well.
This merits the following though - should I not even bother with silicone on the bolts then? I won't put them on the washers because that would probably mess the pressure seal up. I probably can still use it to seal the return gasket and flange though, right? It is depressurized afterall.
pimp my yarischicago · Aug 29, 2010#160 Originally Posted by
Focus_Sh1ft ↑ Thank you for continuing to fuel my ego boost, give my rough draft a read and see if there's anything that seems unclear 😁😁
pimp_my_yaris, you don't sound like an ass at all lol. There's a reason I post here, and it's to tap into the knowledge of actual mechanics and people with this kind of experience. With that said, I want to point out the banjo bolt is, in fact, leaking. With what you said about the copper washers though, I'm inclined to think it's leaking from where the bolt threads into the turbo. Hopefully it'll become more apparent when I take it off. The return leak is still a total mystery as well.
This merits the following though - should I not even bother with silicone on the bolts then? I won't put them on the washers because that would probably mess the pressure seal up. I probably can still use it to seal the return gasket and flange though, right? It is depressurized afterall.
Yes some silicone rtv sealent is a good idea on the return line gasket. And check to see if that bajo bolt cracked as well. It is not as stong as a regular bolt because it has been holowed out to allow oil to flow through it.
Nexus1155Dorchester · Aug 29, 2010#161I don't know if theres any silicone that will handle the heat back on the turbo.
Focus_Sh1ftThread starterNew Jersey · Aug 29, 2010#162I just got the banjo bolt off and have no idea why it was leaking. Crush washers aren't deformed, banjo bolt isn't cracked... Could it be I just didn't have it tight enough? It seems so unlikely, because before taking it off I tried tightening it first and it just wasn't happening.
I'll update when I get the return flange off. Chiseling off JB Weld takes a good deal of time. 😛
pimp my yarischicago · Aug 29, 2010#163That realy sucks, I thought U would have found something obvious. If it were me I would try switching the copper washers and retry it. Watch that thing like a hawk with plenty of light and see exactly where the oil starts to leak. When you thread the bolt into the turbo without the line and washers, does it go easily? Or does it bind up? Mabe the thread pitch is wrong on the bolt. Thread pitch is the number of threads per. mm or inch. Mabe the bolt is stoping before the washers get tight. I allready ran into this problem with a oil line kit for my turbo. Report back
Focus_Sh1ftThread starterNew Jersey · Aug 29, 2010#164Yeah the washers are only very slightly chipped on the outer edge from where I was using a chisel, so no big deal. I honestly think they needed to be tighter. The way I had it earlier was such that the banjo fitting was still able to rotate with some force applied. I took the turbocharger apart so I could more readily get a wrench around the banjo bolt and tightened it a turn or two more.
The return flange is.. eh. I couldn't tell if there was a problem, mainly because I don't know what to look for. I'll be replacing the paper gasket, and using silicone on the bolts. I'll also start off by tightening it a little less...
The nice thing is, since everything is now installed, I can just put the turbo assembly on the engine block and attach the feed and return lines, then crank the engine. This will make it MUCH easier to spot any and all leaks.
Oh yeah, forgot to mention. The return line runs very close to the axle. I was looking at it earlier and it sheared some of the steel braided line. The inner liner is untouched and appears to not be leaking. Since it's the return line, I'll be leaving it for now and designing a bracket to keep it AWAY from the axle.
pimp my yarischicago · Aug 29, 2010#165Sounds like your getting it under control. I would put some silicone on that return line gasket too. As long as their is coolant going through the turbo it should staw cool enough to work. Make sure the gasket surfaces are clean and smooth. Free of jb weld and chisel marks. Good luck and lets see a video!🙇
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#166Update: Turbocharger is back in and I just started the car. I'm not really sure what to think now.
There appears to be a small amount of oil coming from the return elbow on the pan - that's an easy fix. However, I noticed there was a drop of oil on the downpipe flange and where the downpipe connects to the exhaust... How could that have got there? My huge concern now is that for some reason, oil is finding it's way into the exhaust... Because upon starting the engine, I had a ton of white smoke that has yet to dissipate. It's in the engine bay AND coming out of the exhaust. Granted, I did just wrap the downpipe and turbo with exhaust wrap, but why would it be coming out the exhaust as well? Thoughts please 🤷
Edit: Just read this usually means the seals are shot... Please tell me this isn't true... HOW could it be true?
Nexus1155Dorchester · Aug 30, 2010#167Did you end up repriming the turbo? how long were you running it for.
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#168Yeah I reprimed it the same amount as before. I let the engine run for about 5-10 minutes. I also want to point out there is no obvious oil burning smell, and the smoke DOES NOT have a bluish tint to it.
Nexus1155Dorchester · Aug 30, 2010#169Hmmmm, if the seals are blown they're blown. its only about a $30 fix but still shitty to do. Otherwise try to run it some more to see if it still smokes alot. If it isn't grinding or making wooo wooo noises, the turbo should still be good just the seals may be bad if the problem persists.
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#170Yeah no noises or anything... I guess I have no choice but to take it out... AGAIN. 🙄
I've read white is usually coolant though. I don't know what to think 🙁
Ah something else I just remembered - the radiator fan kicked on to full speed within 5 minutes of idle. I think this may be coolant and oil related. GREAT.
pimp my yarischicago · Aug 30, 2010#171Engine burning coolant will be white smoke and smell like rotten eggs at the tail pipe. Realy foul. Hope your head gasket is ok. A bad head gasket or cracked head could be another cause for oil or coolant in the exhaust. Did you hear any engine pinging "detonation"? This thread is starting to make me nervious about my own project. Say it aint so Jerzy.
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#172Haha you're nervous? Imagine how I feel. 😛
I highly doubt there are any issues with the head gasket. I know when I pulled the coolant lines to get the turbo out, I leaked ALOT of coolant because I didn't even realize it was slowly leaking for a few hours. Maybe some found its way into the charge piping? There's also a crap ton of oil residue left from when I was driving around with an oil leak.
I don't really know how to go about this. I think I'll check all my coolant lines, make sure the oil return isn't plugged at all, then off comes the turbo again. This kinda sucks 🙄
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#173Ok figured it out most likely. The paper gasket I used had flaps around the hole that actually blocked the oil's return for the most part. Currently trying to figure out how to cut those out, but I'm still worried the pressure build up may have blown the seal in the turbo? Guess I won't know until I lessen the restriction on the return.
Uh, on the positive side, the previous leaks I had are definitely dealt with at this point. I'll be more happy about that when I know for a fact that I don't have to rip the turbo out, pull it apart, and replace the seal.
pimp my yarischicago · Aug 30, 2010#174Just wondering, have U installed the 1zz injectors yet. Also have U made any adjustments with the FIC
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#175 Originally Posted by
pimp my yaris ↑ Just wondering, have U installed the 1zz injectors yet. Also have U made any adjustments with the FIC
1ZZ injectors (and tb) are in. No adjustments to the FIC yet.
Here's where I stand now:
I unplugged the return, primed the turbo, fired up the car. Within a minute it stopped the white smoke, so that appears to be solved.
However, I was about to take the car out and now have a new problem. I tore out of my neighborhood and blew a ton of white smoke out the exhaust. It appeared to stop about a minute later, but then the oil idiot light came on? Came home, popped the hood, and nearly passed out by how much white smoke came out from under the hood. I'm 100% sure the smell is coolant burning... so... interesting... lol. I definitely hear some sort of bubbling noise happening around the engine block as well. Bubbling + burning = boiling? But why coolant, WHY?
I'll be checking all the coolant lines and blah blah blah. Anyone feel free to throw me some ideas. I also have a CEL again, and was about to go to advance auto to check it out but... not now. 🙄
pimp my yarischicago · Aug 30, 2010#176Well I would say you need to start thinking about the head gasket or cracked cyl. head or possibly a massive coolant leak under the hood. The bubling sound was the engine overheating. I use a funel that attaches and seals directly to the radiator neck. After I have filled the coolant and blead all air out of the cooling system, I check for air bubles coming up from the radiator. If the bubles never stop. Their is a good chance of a blown head gasket or cracked head.
Clean the engine compartment with a hose and fill the engine back up with a 50/50 coolant, water mix. And first check for under hood leaks. It sounds like it overheated bad and possibly blew the coolant out of the resivoir bottle.
pimp my yarischicago · Aug 30, 2010#177Its also possible that when U installed the turbo coolant lines, U may have created a large air pocket in the cyl. head. This would cause some bad over heating as well. When filling coolant U must keep engine runing long enogh for thermostat to open so coolant will flow through the cyl. head and push air pockets to the radiator filler neck. This will take about a half hour. During this time U must monitor engine temp. and make sure U dont over heat. If your fan has turned on and off a couple off times this will be long enough. Dont rev. your engine during this time. And make sure You keep the radiator full.
Sorry for long explanation. Hope this is helpfull.
Good luck in this mission as U have allready accepted it.😢
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#178Haha you're making me nervous man. But...
I checked the coolant lines on the turbo and (thankfully) they're leaking. They only seem to leak while the car is in drive though, because during idle there is no smoke. If the engine was overheating, wouldn't it throw the engine hot light? I wish I knew what this CEL was...
I'm still worried about what you're saying though. The smoke does seem to be isolated to behind the engine block, and the exhaust. I'll work on the turbo coolant leak and hopefully all will be resolved.
cdydjded, are you saying it HAS to be this toyota brand coolant? I was using something else, and at this point most of the OEM coolant has leaked out or evaporated.
I'm also still confused about the oil idiot light. What would cause it to come on if the oil level is adequate?
Also if it's of any importance... The car drives absolutely fine currently.
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#179 Originally Posted by cdydjded ↑
It does not have to be Toyota brand but it is not ordinary coolant. I have some in my garage I get you more info on what it is & a pic.....
As for the coolant lines, if you can stop the leak, dont use them until all other issues are resolve. It will be 1 less problem you have for now....
Honestly, I believe this is what I'm down to regarding issues. Oil is finally resolved, and after fooling around with the t-clamps on my coolant lines it appeared that there was definitely less smoke. I'm thinking the bubbling is simply the coolant burning on the turbo. However, the fact that the radiator fan jumps to full power within a couple minutes during idle (I don't think this ever happened before I put this thing in) makes me nervous. cdydjded, I'd greatly appreciate it if you could get me the specs on the coolant. I think I'd prefer to swap it with the definite proper stuff so I know it's not an issue.
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#180What's the brand name, can't tell. Think I could find it at walmart?
I have no idea what the hell I'm using lol. It's like lemon-lime yellow and I found it in an Arizona tea bottle. Probably wasn't the best idea in retrospect 😁
coheedMaiden, NC · Aug 30, 2010#181Cant find it at walmart. From what Ive heard its cheaper to buy the red coolant at Mercedes dealers then Toyota. Not to sure on that one bc I havent had to buy any yet.
Focus_Sh1ftThread starterNew Jersey · Aug 30, 2010#182 Originally Posted by cdydjded ↑
Well there lies one problem. The toyota coolant is red. The yellow is different. This is Toyota brand bought at the dealer.
Yeah, wow, I just looked this up. I hope I didn't do any damage, I put a good 5k miles on the car with that coolant mixed in with the red. So it looks like dyes are added to differentiate the type - and that's based on chemicals used. So that is, in fact, a problem lol. I'll just look for some red coolant at walmart / advance auto, and I'll try to grab the more expensive one. Thanks so much for pointing this out... I had no idea.
I can safely say that I have probably learned more about cars in the last 2 weeks than someone would learn in two semesters of college 😆
Nexus1155Dorchester · Aug 31, 2010#183Mixing coolants is bad over time, i doubt short term damage did anything. check out Zerex/Xerex G05 and see if it is suitable for your car. We use G12/G16 whatever it is in our Audis which is bright pink and the Zerex is a good cheap replacement for it at an 1/8th of the price. Make sure whatever coolant you choose is good for your car though.
Bluevitz-rsOshawa, Ontario, Canada · Aug 31, 2010#184You can just use Distilled water in the mean time until you get the leaks sorted out. As long as there's some coolant still in there for lubrication.
And if oil and/or coolant got onto the header wrap, it now trashed. You'll have to replace it. But you can do that after you get the leaks fixed. Get a can of foaming engine cleaner and clean off all of the oil spillage. That way you'll be able to more clearly see if there's a leak and were it's coming from.
Focus_Sh1ftThread starterNew Jersey · Aug 31, 2010#185Is it possible I could get an oil idiot light from too much oil? Seems weird, but I have noooo idea what this oil idiot light could be from. My only other thought is the sender is failing?
Just read something interesting - having too much oil causes it to flood over the crank shaft, which whips it up and creates air pockets in the oil. This immediately caught my attention, as I noticed the nylon tube I use for my oil pressure gauge seems to have a lot more air in it than it did when the car is turned off. This seems like it would explain why the oil idiot light seems to freak out and not always stay on constantly, and turns off during idle when it's expecting less pressure. Does what I'm saying make any sense lol?
I think I'm going to do a fresh oil change right now... Only problem is I am NOT looking foward to getting the filter off, as the Zage return elbow blocks the stupid thing. 🙄
fnkngrvIn The Hotbox · Aug 31, 2010#186I have seen people get the oil light when they had too much oil in their cars...granted they were Chrysler or Dodge so I cannot say for sure that is part of the indicator inventory of what the Toyota system monitors...
Bluevitz-rsOshawa, Ontario, Canada · Aug 31, 2010#187All the oil light tells you is you have less than 10psi of oil pressure, which could very well be from air pockets.
Edit: So just to clarify, it's not an oil level indication, it's a pressure indication.
Focus_Sh1ftThread starterNew Jersey · Aug 31, 2010#188I'm about ready to rip my hair out...
Changed oil, tightened coolant t clamps, started car, let it idle. Revved it to 2500 whereby I was greeted by a metallic scraping noise. I don't know if it's internal engine or not, but this likely just took a turn for the worst... 🙁
Hopefully it's just something vibrating, but I'm afraid to try driving it now.
pimp my yarischicago · Aug 31, 2010#189Sorry to hear about your bad luck. I hope its just a exhaust problem or something. Best of luck!
ParmasML · Aug 31, 2010#190 Originally Posted by
Bluevitz-rs ↑ All the oil light tells you is you have less than 10psi of oil pressure, which could very well be from air pockets.
Edit: So just to clarify, it's not an oil level indication, it's a pressure indication.
Agreed the light indicates pressure and not level. Keeping good pressure is a must and very dangerous driving with it on especially for turbo.
Nexus1155Dorchester · Aug 31, 2010#191Is the low oil pressure light still coming on? You could have sucked some sealant through your oil pump if you didn't wait for the sealant to dry properly causing it to clog a bit.
Also, if you dont have oil pressure going to the turbo, say goodbye to that turbo. I just did it last week, the turbo was defective though, or both of them would have blown.
Focus_Sh1ftThread starterNew Jersey · Aug 31, 2010#192The metallic sound turned out to be the exhaust, still haven't found where but I know it is now. Why it suddenly decided to start making noise... 🤷
I haven't taken the car out yet today, as I've found my coolant leak finally and am patching it with JB Weld. Yes, I know the stuff sucks, but it did work fine the first time for this use, and my other coolant line is sealed the same way with no problems. This will be temporary, as I think I need to order the correct size adapters.
As for oil pressure, let me clarify a bit further. At all times, my mechanical gauge reads perfectly accurate psi ratings and is connected to the oil filter through a sandwich adapter. When I was driving yesterday, the light came on after a about a minute of driving. It blinked for awhile, and stopped. Then came back and stayed on. I believe it either turned off or blinked a couple more times before pulling into my driveway. By the time I had put the car in park, it was gone. This happened TWICE, and followed nearly the same pattern. At the time, I had about an additional inch of oil (as per the dipstick) from the top dot.
Originally Posted by
Nexus1155 ↑ Is the low oil pressure light still coming on? You could have sucked some sealant through your oil pump if you didn't wait for the sealant to dry properly causing it to clog a bit.
I ended up using teflon paste for most of the threads, so this is definitely possible. I'm pretty sure either way that whatever is happening with the oil light isn't a big deal. I figure because I have adequate oil levels and no funky pressure readings that it's most likely okay... Still would like to know for sure though.
Focus_Sh1ftThread starterNew Jersey · Aug 31, 2010#193After two days of frustration and symptoms pointing to potentially huge issues, it seems as though all my leaks are finally plugged.
Will be taking her out first thing tomorrow. Wish me luck guys.
GOOD LUCK!!! Make sure you record it too..
Focus_Sh1ftThread starterNew Jersey · Sep 1, 2010#195Good news and bad news.
First, the good. The leaks are definitely plugged (except for an exhaust leak where the downpipe connects, no big deal) and no more white smoke.
Now, the bad. I had to have my car towed.
I was driving and heard a loud popping sound when I entered boost, and immediately pulled over. Car starts, but idles like crap. Decided it was best to have it towed...
Here's the ridiculous part that I'm never going to forgive myself for. That light... It isn't the oil idiot light... IT'S THE OVERHEATING LIGHT. One of the guys at the shop pointed it out by unscrewing the radiator cap. Sure enough.. it was overheating bad. I pray that my stupidity didn't just cost me a crap load. How can someone install a turbocharger with no expertise, but be stupid enough to confuse two dashboard lights lol?
Anyways, this is out of my hands at this point. My fingers are crossed and I'm hoping the diagnosis they run isn't absolutely terrible. I'm having the guy do a compression test and check the internals / head gasket, so we'll see. Then there's still the issue as to why it's overheating. I doubt it's simply because I'm using the wrong coolant, but with a turbocharger in.. who knows.
On the plus side, my install has run on the cheap side so far, so I still have some cash that I (reluctantly) can throw at this still. After two weeks of incredibly hard work, I'm ready to do what's necessary to just get the car up and running successfully.
I hope I'm not discouraging anybody that wanted to do this... I know this all sounds scary, but my car isn't kaput. Also, if you're not a total f-up like I am, you won't have problems where you mix up the oil and overheating lights. God I wish I had my water temp gauge installed before all this...
Anyways, you guys will be the first to know when I have updates. I feel so crummy right now, because all I can do is sit here and hope for the best.
Nexus1155Dorchester · Sep 1, 2010#196 I was driving and heard a loud popping sound when I entered boost
Did you check all of the clamps and couplers and hoses on the boost side of the piping? They need to be TIGHT, Air will always take the path with the least resistance, thats why you should always pressure test your setups. Sounds like you blew a clamp off. Usually you can uplug MAF and limp home.
If its more severe than that. Sorry to hear.
Focus_Sh1ftThread starterNew Jersey · Sep 1, 2010#197Nexus, you sir... are my savior! 😁
I was freaking out too much earlier to remember I was having issues with the coupler on the compressor housing yesterday. I got driven to the place, bought my trusty jack and wrench with me, and got under the car to check it out. Sure enough, the piping was disconnected! 😲
So I immediately fixed it, at the shop, and got my car back. They charged $97 to check codes, clear them, and fill the car with coolant. Could have been worse. For anyone interested, the codes I had were iginition coil errors (because I unplugged the sparks to prime the turbo), O2 sensor (because the piping was disconnected), air intake temp (same as O2), and MAF (probably also the same).
The best part is, driving home I got no CELs, and no overheating lights. So I'm going to work on that coupler a bit more, and fix my exhaust leak (could that cause overheating because it's venting into the engine bay?). Then I'll drive the car around and see if I get any overheating lights again. I'm going to assume the worst and expect to get them, so I've been trying to think of ways to keep the water temperature reasonable. So far, the only two ideas I've had was to pull coolant off the turbo (don't want to), and/or to get a performance radiator.
I may be out $170, but it turns out it was money well spent. 🙂
ALSO - running lean most likely means running hotter, correct?
cali yarisCanoga Park, CA · Sep 1, 2010#198yay, sounds like you're getting close. Engine bay heat shouldn't cause the internal coolant temp to overheat. I never overheated at 8psi on stock cooling system. Pretty sure the other boosters haven't had problems, either.
leaner = hotter, yes
God I wish I had my water temp gauge installed before all this...
+1 million gazillion
MINIMUM GAUGES FOR TURBO PROJECTS:
water temp
oil pressure
boost
Focus_Sh1ftThread starterNew Jersey · Sep 1, 2010#199 Originally Posted by cdydjded ↑
You dont need a performance radiator. You need to resolve the issue at hand which is the fluids in you cooling system....
Agreed, just looking ahead as well. I'm thinking coolant was the issue, but we'll see tomorrow when I try driving again.
Garm, I blame my lack of water temperature gauge on you. If you sold an electric gauge, I woulda bought from you and wouldn't be clueless on where to place this stupid sender unit. And no, no scangauge. 😛
Exhaust leak is dealt with, piping is fixed, so first thing tomorrow once again... I need to do a "stress test" before I go get tuned methinks.
Nexus1155Dorchester · Sep 2, 2010#200LOL no problem, sometimes its something simple.
If you are still leaking you are not crushing those crush washers enough. You need to put assloads of strength on it not just wrist tight like a 10mm bolt. I'm pretty strong and I have to put my body into it sometimes for them not to leak at all.
Hope you get it all sorted out