Yarisworld Archive

I NEED Boost... Opinions puh-lease

517 posts · 111,381 views · page 1 of 11

Focus_Sh1ftOriginal postNew Jersey · Jun 16, 2010#1
So after some debate I've decided to splurge on a turbo setup and drop bolt-on mods, as they just will not cut it. I'm tired of being blown away by a minivan from a full stop. 😛

After learning a bit about the necessary components and options available I've deemed this to be in my best interest:
1. Zage kit w/o turbo and oil pan
2. Emanage Blue
3. Mistu 14b (and rebuild) or Garrett GT2554

Hopefully I'll be able to get a hold of ChinoCharles to talk about his experience with the Emanage, and even the 14b. I still need to find a shop that can tune Emanages, but that shouldn't be too hard to find, (?) and is at the top of the to do list. Oh, and I plan on starting at 6 psi and shooting for 8 psi after the kinks are worked out. I hope to begin this next month. Opinions on the setup I have in mind would be much appreciated. 😁

Also, been wondering about a few things that I can't find clear cut answers on...
1. Will the stock fuel pump and injectors suffice at as much as 8 psi?
2. Is it crucial to have a custom exhaust setup prior to tuning, or can it wait til after? Obviously I'll need one to get the most out of any turbo setup, but is it vital to have during tuning to get an accurate tune?
3. Is anyone else running an Emanage Blue successfully? Also, I'm open to suggestions on alternatives.
4. I'm really torn on turbos... The 14b will work and is so cheap, but spools up at 3k+ rpm (btw, this is a daily driver ONLY). For like $700 more I can get the GT2554 which spools up quicker and is a brand name. I really need opinions on this. My current plan is to grab a 14b and possibly upgrade to the GT2554 later, maybe when I decide to increase boost?

Replies 516

Nexus1155Dorchester · Jun 16, 2010#2
I tried to buy ZAGE without the turbo and oil pan, they would not seperate it, its a package deal. You can probably source everything else anyways.

You can get a 14b or you can get a GT25 from an SR20DET setup and save that $700+ you would spend and just get the GT25 rebuilt. It's what I am going to do once I have enough funds for a turbo yarii.

I think you may have to upgrade the injectors? Not sure, don't quote me on that...
cali yarisCanoga Park, CA · Jun 16, 2010#3
^ everything he said
Focus_Sh1ftThread starterNew Jersey · Jun 16, 2010#4
Originally Posted by Nexus1155 ↑
I tried to buy ZAGE without the turbo and oil pan, they would not seperate it, its a package deal. You can probably source everything else anyways.

You can get a 14b or you can get a GT25 from an SR20DET setup and save that $700+ you would spend and just get the GT25 rebuilt.
Didn't Racerfreak email them and get a $900 quote for the kit minus the turbo and pan? Although if you're saying that's a no go then I guess it doesn't matter. I don't wanna have to piece a kit together myself unless absolutely necessary. I also don't want their allegedly crappy turbo... 🤷

As for the GT25 rebuild, that's a sweet idea. I'll be looking into that.

Originally Posted by cdydjded ↑
is another option[/COLOR]
3. Mistu 14b (and rebuild) or Garrett GT2554 Both these turbo use completely different turbine inlet & outlet patterns. If you have a manifold & downpipe made for the 14B it would not work for a GT2554 and vise versa.

1. Will the stock fuel pump and injectors suffice at as much as 8 psi?
Fuel pump yes, injector no, see my dyno with stock injector & 1ZZ injectors
2. Is it crucial to have a custom exhaust setup prior to tuning, or can it wait til after? Obviously I'll need one to get the most out of any turbo setup, but is it vital to have during tuning to get an accurate tune?
You cannot & should not run the stock exhaust with a turbo kit, it is too small in diameter period
I had no idea the inlet and outlet patterns were different, thanks for pointing that out... Now I need to figure out what pattern Zage's turbo is so I know what I'm dealing with.

As for injectors, would stock tC ones work, or are they too large? I could probably get those cheaper than 1ZZ injectors.

And exhaust... Would a catback exhaust make the cut, or should I go full out turbo-back exhaust?
Nexus1155Dorchester · Jun 16, 2010#5
Last time I talked to ZAGE it was $888 plus shipping or something weird like that from their warehouse.

Chinese turbos are coming up in this world, so don't knock it until you try them, would you be surprised if you knew that OEM turbos came from China? such as Borg Worner? You just need to know who to go through and its not some crappy place with low quality control which ZAGE has hopefully upgraded from.

Yes, the manifold to turbo flange and what the turbo is is the big thing to look out for, turbos have a variety of flanges.

Ideally, it would be nice to have an exhaust that is straight pipe all the way back from the turbo the same diameter as the outlet, but you can probably make due with 2.5" like most people choose. Use high flow cats or no cats at all.
Focus_Sh1ftThread starterNew Jersey · Jun 16, 2010#6
.
Originally Posted by Nexus1155 ↑
Last time I talked to ZAGE it was $888 plus shipping or something weird like that from their warehouse.
Wait, for the whole kit? That means shipping is ~ $1000??? 😲

Chinese turbos are coming up in this world, so don't knock it until you try them, would you be surprised if you knew that OEM turbos came from China? such as Borg Worner? You just need to know who to go through and its not some crappy place with low quality control which ZAGE has hopefully upgraded from.
The only reason I'm hesitant to use their turbo is from the stories I've read that involve unwelcome explosions lol. I'd rather get something I know will work. I guess even if it does blow, rebuilding it isn't the worst thing in the world...?

Yes, the manifold to turbo flange and what the turbo is is the big thing to look out for, turbos have a variety of flanges.
Nothing is ever easy. 😛 If my plan holds, I'll ask them for the flange size / inlet, outlet pattern / etc. etc.
Nexus1155Dorchester · Jun 16, 2010#7
Depends, did you contact ZAGE directly, or are you talking about the Ebay kit, I contacted them over a year ago so times might have changed

The turbos that I have heard of exploding so far, is because the owners did not "prime" the turbos before starting the car, initially spinning an unlubricated turbo. But yes, I know what you mean.

Most common is the GT25/28 flanges on most yarii manifold applications....
Focus_Sh1ftThread starterNew Jersey · Jun 17, 2010#8
I'm waiting to hear from Zage. Also, some quick research shows the flange is a T25/T28, so a 14b would be problematic, but do-able. If they don't wanna sell the kit in pieces I'll probably still consider it... The turbo seems like an appropriate choice, reliability put aside.

Originally Posted by Nexus1155 ↑
The turbos that I have heard of exploding so far, is because the owners did not "prime" the turbos before starting the car, initially spinning an unlubricated turbo. But yes, I know what you mean.
So... unlubricated parts spinning at tens of thousands of RPMs is dangerous? News to me 😁

Maybe their turbochargers aren't as bad as people make them out to be.

Btw, thank you so much for pointing out the SR20DET. You can get the GT25 on ebay for like the same price of the 14b. It may not be ball-bearing, but eh 😎
PETERPOOPOahu · Jun 17, 2010#9
Originally Posted by cdydjded ↑
2. Is it crucial to have a custom exhaust setup prior to tuning, or can it wait til after? Obviously I'll need one to get the most out of any turbo setup, but is it vital to have during tuning to get an accurate tune?

3. Is anyone else running an Emanage Blue successfully? Also, I'm open to suggestions on alternatives. Peterpoop
[/COLOR]

Well technically i am using the emanage ultimate. However, chinocharles ( you can talk to him at the forums on www.microimageonline.com ) is using the emanage blue successfully. Both have been tuned with success. However, like mentioned earlier, the AEM FiC could work aswell. Over on the microimage forums, a use named "Echo_hrs" sp? just bought an AEM FiC and will be having his blitz kit tuned with it eventually. So we can see if that will work aswell ( it should ).

Also, like stated, you should have a custom exhaust setup before your tune. Besides the obvious reasons, you also wouldn't want to pay to have them retune after you add your turbo back exhaust ( or whatever you decide with ).
cali yarisCanoga Park, CA · Jun 17, 2010#10
would you be surprised if you knew that OEM turbos came from China? such as Borg Worner?
Fuzzy logic there, as you won't find a Borg-Warner quality turbo in a $900 kit. I personally wouldn't take a chance, and you have no recourse with customer service IF it fails.
RacerFreakXXXSomers NY · Jun 17, 2010#11
Yes, I messaged Zage directly and they will sell you pieces of the kit. They wanted about $1k shipped w/o turbo. I would go that route and buy a Garrett or HKS turbo if you want instant turbo. Otherwise wait till MI's kit comes out.

I would suggest a diff, clutch, tires (205's would probably be best), and a lot of research before you go turbo.
Nexus1155Dorchester · Jun 18, 2010#12
Fuzzy logic there, as you won't find a Borg-Warner quality turbo in a $900 kit
No, legit, we have certificates from borg warner towards that company for provided services. We just started ordering turbos from them, they also stated they would replace the turbo if anything happened related to the turbo.

Another company we have found in US using these same turbos, rebranded as "made in US turbos" has sold over 200 turbos and only a good handful have failed from unforseen circumstances which have not been investigated, just replaced. I have more information regarding all of this, but i don't feel the need to ramble on about something nonsensicle to the topic at hand.

But in all honesty, nothing will EVER replace a nice genuine from the factory Garrett 👍
Focus_Sh1ftThread starterNew Jersey · Jun 20, 2010#13
So Zage finally replied and quoted $1045 for their kit without the pan and turbo. I'll definitely be doing this once I get the remaining details ironed out.

Racerfreak raised a good point I forgot to ask about earlier. How well will the clutch hold up? I've read that it's going to begin slipping and eventually fail under boost, but is this true at the 6-8 psi range as well? I don't remember seeing any Blitz SC'ed people having this issue.

NEXUS - how exactly were you planning on rebuilding that GT25 from the SR20DET? I've looked and looked and only found rebuild kits with journal bearings. Not a big deal and this will still be my number one choice for the turbocharger, but is it possible to buy a rebuild kit with a ball bearing instead? I've yet to find one 🙁

Lastly, any significant benefits using the AEM FiC over the eManage blue? Knowing they both work, I'm inclined to choose the cheaper option 😳
Focus_Sh1ftThread starterNew Jersey · Jun 23, 2010#14
I was also wondering if anyone had any additional info regarding the piping clearance issue on the Zage kit? I'm running DFs so I've been trying to figure out how much of a problem this is going to be... In their install pictures, it doesn't appear to be a problem. I'm hoping worst case is that some of the piping needs to be trimmed a bit.
cali yarisCanoga Park, CA · Jun 23, 2010#15
I may be offering Carlos' kit soon - we are talking. It works on his car with the FIC and would require only a minor dyno tune after the install.
Nexus1155Dorchester · Jun 23, 2010#16
Turbos are fairly simple to be rebuilt as long as you do not mess up the balancing of them..

http://www.nicoclub.com/archives/gen...ebuilding.html

If you are going to do the ZAGE kit, Offer them $1100 shipped for the WHOLE kit, try out the whole kit first. I think the main issue with this kit are that people are SPECULATING the issues, not actually trying the kit out itself.... It is a kit for a reason, there has been reviews on the taiwan forums iirc.

Is this your daily driver?
Focus_Sh1ftThread starterNew Jersey · Jun 23, 2010#17
Originally Posted by cali yaris ↑
I may be offering Carlos' kit soon - we are talking. It works on his car with the FIC and would require only a minor dyno tune after the install.
Great to hear. 😁 I'll hold off on ordering Zage for a bit. Any ideas on initial pricing?

Originally Posted by Nexus1155 ↑
If you are going to do the ZAGE kit, Offer them $1100 shipped for the WHOLE kit, try out the whole kit first. I think the main issue with this kit are that people are SPECULATING the issues, not actually trying the kit out itself.... It is a kit for a reason, there has been reviews on the taiwan forums iirc.

Is this your daily driver?
Do you think they'd do $1100 shipped for the whole kit? That's like $700 less than what they ask... I do agree on the speculation part, as I don't know anyone who frequents this forum that has installed the kit. Do you possibly have links to those reviews?

And yes, this is my daily driver.
Nexus1155Dorchester · Jun 23, 2010#18
Worth a shot, say that many people are waiting on a review for this kit from someone and that if it works out well you will write an excellent review with pics and videos. A lot of companies do this as it will benefit them. I will try to find the reviews when i search through that forum next.

EHHHH do you have anyone elses car to drive in the meantime. ANY turbo kit regardless will take some time to install, Even when busting ass on it. Expect it to be down a week at the least. More so if you get someone who is not experienced in this, even though this is an easy engine to work on, there will always be some snag or something
cali yarisCanoga Park, CA · Jun 23, 2010#19
agreed. if it's a KIT (meaning all the parts are made and included), 8 hours is about right.

maybe add wiring time to that, but it's not a week regardless.
Nexus1155Dorchester · Jun 23, 2010#20
8 hours maybe if you have installed this kit before like cdydjd has before, but for other people never working on this engine it may take a bit along with the wiring. And also I doubt some shop would sit there for 8 hrs straight doing the same job. Some might, but I doubt that it will get done like that, especially with checking and making sure everything works at the end before you start and test it.
PETERPOOPOahu · Jun 23, 2010#21
Me and my dad installed the blitz kit in 1 day ( not knowing what we're doing and taking our time ), and did the wiring the following day.
advocatelocation · Jun 24, 2010#22
Originally Posted by Nexus1155 ↑
8 hours maybe if you have installed this kit before like cdydjd has before, but for other people never working on this engine it may take a bit along with the wiring. And also I doubt some shop would sit there for 8 hrs straight doing the same job. Some might, but I doubt that it will get done like that, especially with checking and making sure everything works at the end before you start and test it.
A shop with 4 technicians could bang it out in a day?
Nexus1155Dorchester · Jun 25, 2010#23
SC goes on the intake, alot easier to get tools in there and alot less work to do all of that, release belt tension, and put a new belt on etc. Did you need to run oil lines/coolant lines/ all that jazz? It does take substantially longer with a turbo along with clamping everything down properly and testing the system. Do you know how many times i overtorqued a crush washer?

Yes, a shop with 4 technicians can bang it out rather quickly, but if they were each working, they would be banging heads. Me and a buddy busted out an incredible amount of work in a 3 day period when some guy came up from D.C. but it still took us almost 40hrs of staying at the shop, not something most places would do for cheap
Focus_Sh1ftThread starterNew Jersey · Jun 26, 2010#24
Install time doesn't matter, as my parents have two cars I could borrow when needed and all my friends drive so no worries. I'm going to contact Zage shortly and atleast ask for a decent discount in exchange for a quality review, pictures of install, and install steps. I'd be surprised if they didn't take the offer as it's a potential entrance into the USDM market.
Nexus1155Dorchester · Jun 26, 2010#25
Also state that you will take videos and upload to youtube and get the car dynoed eventually and upload results, that will also entice them as well, but you do have to pull through with that promise. They may charge you full up front but will refund you later, either way, you get your money back....
advocatelocation · Jun 29, 2010#26
If you pay full up front make sure you get it in writing the amount they are going to refund beforehand.
Focus_Sh1ftThread starterNew Jersey · Jul 8, 2010#27
Still trying to work out a deal with Zage, but in the meantime I'm going to begin calling tuning and exhaust shops in my area. The optimal exhaust setup I need is still a bit unclear to me...

Should I go for a 2.25" or 2.5" diameter?
Muffler or no muffler?
Will catback be acceptable? I figure I'll replace the cat with a high-flow cat as well. I just can't see how I'd pull off a turbo-back exhaust setup without having the turbo on first lol. This also assures the downpipe from Zage's kit will still fit.

Oh, and also: anyone else have anything to say regarding the clutch? I'm especially curious as to how it will hold up on my automatic transmission...
cali yarisCanoga Park, CA · Jul 8, 2010#28
1. your automatic transmission doesn't have a clutch.

2. how many psi? 2.25" if mildly boosting, I like the sound of 2.5" though. cat-back is fine, you'll lose a little power from the restriction, but you can always attend to that later.

3. Muffler - yes, it won't affect your power. I make 357 whp, and I have a muffler.
Focus_Sh1ftThread starterNew Jersey · Jul 9, 2010#29
Originally Posted by cali yaris ↑
1. your automatic transmission doesn't have a clutch.
Ok, stupid mistake on my part. 😛 I assume the torque converter wouldn't experience the same issue as a clutch would then?

I'm wondering though, are there any particular issues that may arise with an automatic transmission?
Bluevitz-rsOshawa, Ontario, Canada · Jul 9, 2010#30
^ Overheating
cali yarisCanoga Park, CA · Jul 9, 2010#31
you can install a trans fluid cooler, it's probably a good insurance policy for your trans.
Focus_Sh1ftThread starterNew Jersey · Jul 13, 2010#32
Ugh, trying to get quotes for an exhaust setup for our cars is a pain lmao. No one has ever even heard of it.

As for tuning, I found what looks to be a legit place that claims they can tune anything so long as I provide the software. They charge $155 / hour + parts for dyno tuning. Sounds pretty good to me, and they're only about 20 minutes away. Thoughts?
cali yarisCanoga Park, CA · Jul 13, 2010#33
Ask for a reference or two, and/or go hang out when they are tuning a car.
Focus_Sh1ftThread starterNew Jersey · Jul 13, 2010#34
Just found an ultimate w/ universal harness for $410. I'm thinking I'm going to jump on this deal. Originally I thought I could get my hands on an emanage blue for like $150. Turns out I need to work on my reading skills...🙄

Regarding the eManage blue, I am terribly confused as to what harnesses I would need if I went that route. Obviously ignition and injection, but there's a ton of others listed on Greddy's site that I don't understand the purpose of. I've PMed ChinoCharles for more info, but was wondering if anyone else could shed some light on this?

At this point, I'm actually beginning to lean more towards the AEM FiC. It seems a bit more straight-foward, and I believe there has been higher success with this on the Yaris. (?)
I'd also like to mention that I intend to wire up whatever piggyback I do choose, myself. Seems like a daunting task, but not impossible. 🙂
Focus_Sh1ftThread starterNew Jersey · Jul 22, 2010#35
FINALLY got an email from Zage regarding my proposal. They're willing to do $1400 for the full kit so long as I provide some media regarding the install. Personally, I think this is incredibly fair and would only cost $50 extra than what I was originally planning to do (kit w/o turbo and pan, use ebay gt25). This will allow me to maintain a close relationship to customer service as well (atleast a rational person would expect this). SO, it looks like we're finally getting a test subject for this kit. 😁

I'm going to bide my time for the next week or so, as I would really like to get some feedback from the guy who bought Yoda's kit. With what I know atm, I don't think fitment is going to be too difficult to account for, but I'm mostly worried about the quality of the turbocharger. I'm hoping worst case is that I have to replace it, but I'm worried about any sort of engine damage that may come with an explosion...

Regarding management, I've decided I will be using the AEM FIC afterall. I talked to cdydjded briefly and didn't realize he's only running fuel maps (with the car running perfectly fine). I figure it couldn't hurt to try hooking up a few of the other features and asking my tuner to attempt to get them working. Worst case they don't, but I get fuel maps which appears to be all I really need.

As for additional equipment to run with this turbocharger setup, I'll be swapping in 1ZZ injectors. I also will be adding a cheapo transmission fluid cooler. I'm also going to begin with oil cooling for the turbo. I hope to change/add water cooling at some point. I also really would like to add a water/meth injection system, but that's much further down the road. If anyone else has any other ideas for additional stuff, please let me know. 👍

Oh and btw Garm - you owe me oil tap pics. Don't think for a second that I forgot😛
Focus_Sh1ftThread starterNew Jersey · Jul 29, 2010#36
Ok so EVERYTHING has been ordered. Gauges and the FIC are currently on the way, and I'm about to leave to go wire transfer the money to Zage.

August is gonna be a busy month. 🤘
PETERPOOPOahu · Jul 29, 2010#37
good luck!
cali yarisCanoga Park, CA · Jul 30, 2010#38
As for additional equipment to run with this turbocharger setup, I'll be swapping in 1ZZ injectors.
Do you have auto trans? If you don't, you definitely don't need this.

water cool the turbo!! It's two lines, and you will be glad you did.
cali yarisCanoga Park, CA · Jul 30, 2010#39
here you go:

Here is my oil return tap. We put it way high up, works great.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
Focus_Sh1ftThread starterNew Jersey · Jul 30, 2010#40
Originally Posted by cali yaris ↑
Do you have auto trans? If you don't, you definitely don't need this.

water cool the turbo!! It's two lines, and you will be glad you did.
I do have an automatic. Regarding fluid temperature, I'm going to get the gauge installed and monitor temps during normal driving conditions. I think I'm going to grab a transmission fluid cooler regardless though. I need to find a place to mount one first.

And I am planning on water cooling the turbo, but I may not right away. If I can figure out how to set it up while I'm doing the initial install then I definitely will.

Also - THANK YOU for the oil tap pics. 🙇
I'd rather turn that Zage oil pan into a cereal bowl before putting that thing on my car.
Nexus1155Dorchester · Jul 30, 2010#41
Ahhh you guys say it like you drill into the block itself. That looks like the upper oil pan instead.

You are not going to be pushing crazy boost or hauling hard loads, if the tranny is going to blow under stress it will blow regardless. Burning up the bands are from the it staying in the shift for too long or something getting glazed over or whatnots, you would have to check it, but hey any transmission cooler is better than no tranny cooler on EVERY car.

Do it right the first time.... the water lines are easier to run than the oil lines themselves. If you are using the ZAGE kit, it may come oil cooled only anyways and thats all it will ever be, no way to change that unless you change turbos.

If the oil pan comes with your kit, i may be willing to buy it from you if the yaris is still around at the time.
Focus_Sh1ftThread starterNew Jersey · Jul 30, 2010#42
I get the feeling the transmission will be fine, but adding a cooler can only help. Plus, they're pretty cheap.

I'm pretty sure I read the Zage turbo can be water cooled, but I may have that mixed up with another turbo... I'll double check.

EDIT:
Can't find anything on it now...

I was wondering though, should I use higher octane fuel when I get this up and running? I understand the significance here, but would it actually be safer to retain the OEM suggested octane rating?
Nexus1155Dorchester · Jul 30, 2010#43
When turbo always use teh super grades. So most likely 93 in Jersey.. Turbo setups are more prone to detonation especially when you do not remove timing from the stock maps.
cali yarisCanoga Park, CA · Jul 30, 2010#44
91 here, definitely. you do NOT want detonation
YodaFL · Jul 30, 2010#45
Originally Posted by Focus_Sh1ft ↑
FINALLY got an email from Zage regarding my proposal. They're willing to do $1400 for the full kit so long as I provide some media regarding the install. Personally, I think this is incredibly fair and would only cost $50 extra than what I was originally planning to do (kit w/o turbo and pan, use ebay gt25). This will allow me to maintain a close relationship to customer service as well (atleast a rational person would expect this). SO, it looks like we're finally getting a test subject for this kit. 😁

I'm going to bide my time for the next week or so, as I would really like to get some feedback from the guy who bought Yoda's kit. With what I know atm, I don't think fitment is going to be too difficult to account for, but I'm mostly worried about the quality of the turbocharger. I'm hoping worst case is that I have to replace it, but I'm worried about any sort of engine damage that may come with an explosion...

Regarding management, I've decided I will be using the AEM FIC afterall. I talked to cdydjded briefly and didn't realize he's only running fuel maps (with the car running perfectly fine). I figure it couldn't hurt to try hooking up a few of the other features and asking my tuner to attempt to get them working. Worst case they don't, but I get fuel maps which appears to be all I really need.

As for additional equipment to run with this turbocharger setup, I'll be swapping in 1ZZ injectors. I also will be adding a cheapo transmission fluid cooler. I'm also going to begin with oil cooling for the turbo. I hope to change/add water cooling at some point. I also really would like to add a water/meth injection system, but that's much further down the road. If anyone else has any other ideas for additional stuff, please let me know. 👍

Oh and btw Garm - you owe me oil tap pics. Don't think for a second that I forgot😛
He did not prime the turbo at all. He just slapped it all together. As for fitment i forgot to ask about exactly what he did. The turbo that i got from them was only oil cooled only and was not ball bearing. If you have anymore questions ask away and i can see what i can dig up. O and i did say it only comes with installation pics right? Hope you have some help installing it and good luck👍
Focus_Sh1ftThread starterNew Jersey · Jul 30, 2010#46
Originally Posted by Yoda ↑
He did not prime the turbo at all. He just slapped it all together. As for fitment i forgot to ask about exactly what he did. The turbo that i got from them was only oil cooled only and was not ball bearing. If you have anymore questions ask away and i can see what i can dig up. O and i did say it only comes with installation pics right? Hope you have some help installing it and good luck👍
😁😁😁😁

You just made my day sir. Thank you so much for getting him to talk. I feel so relieved knowing he didn't prime the turbo. If you can get a hold of him and ask about that fitment issue and his oil return setup (and whether or not the pan was used), I will invest my remaining cash into having a statue of you made. It will be placed in my front yard. It will be glorious.

Anyways, anybody have any ideas on how to prime the turbo on our cars? I understand what needs to be done but... how?

Garm - you use 91 octane? Am I correct in thinking more boost = higher octane needed?
cali yarisCanoga Park, CA · Jul 30, 2010#47
^ I tune up to 15 psi on 91 pump gas alone. Above that, need to turn on the water/meth.
Nexus1155Dorchester · Jul 31, 2010#48
To prime we usually disconnect ECU connectors and crank it over for 5 secs a handful of times. Won't start that way until you put the ecu connectors back in
pimp my yarischicago · Jul 31, 2010#49
👍Please post pics of your install. Sound like a great price!
Focus_Sh1ftThread starterNew Jersey · Jul 31, 2010#50
Originally Posted by pimp my yaris ↑
👍Please post pics of your install. Sound like a great price!
Will do. I made a promise to Zage that I would anyway. There's going to be pictures + video during the install, steps taken, and a review at the end. I'll also be asking many questions here during the install as I have little experience with this.