Yarisworld Archive

I NEED Boost... Opinions puh-lease

517 posts · 111,381 views · page 3 of 11

Replies continued

coheedMaiden, NC · Aug 21, 2010#101
Originally Posted by Focus_Sh1ft ↑
Waiting for school to start back up is never a good thing. 😛

I'm glad I'm keeping you entertained lol. Expect a solid 8 hours of work (and pictures) on this on Sunday.
Tell me about it. But Ill be done In Dec so I can look for a decent 40hr/week job.

And I do enjoy your thread. You, pimp_my_yaris and cdydjded are an inspiration.
sleey0PA · Aug 21, 2010#102
I feel your pain. When things are torqued down real tight I can never get them off. That's why I end up paying others to do my installs instead of doing it myself. lol

I'd rather do it but half the time shit never works out right for me....
Nexus1155Dorchester · Aug 21, 2010#103
Usually a deep socket on a wobbly head extension is good to get your mani bolts. Or a flex head ratcheting wrench.

I said you may need to reclock it in order to get the piping to go where it needs to go, hopefully thats not the case because off comes the turbo and mani again :(

that is SWEET that it bolts up to the stock exhaust, but the stock might have too small diameter of piping. Run open downpipes for now :P ? Its loud but dear god is it sexy.

Try to look at alot of pics of other zage installs, i know there are a bunch from that indonesian guy that posts up here.
Focus_Sh1ftThread starterNew Jersey · Aug 21, 2010#104
Originally Posted by sleey0 ↑
I feel your pain. When things are torqued down real tight I can never get them off. That's why I end up paying others to do my installs instead of doing it myself. lol

I'd rather do it but half the time shit never works out right for me....
Nothing a little bit of leverage can't fix. 👍

Originally Posted by Nexus1155 ↑
Usually a deep socket on a wobbly head extension is good to get your mani bolts. Or a flex head ratcheting wrench.

I said you may need to reclock it in order to get the piping to go where it needs to go, hopefully thats not the case because off comes the turbo and mani again :(

that is SWEET that it bolts up to the stock exhaust, but the stock might have too small diameter of piping. Run open downpipes for now :P ? Its loud but dear god is it sexy.

Try to look at alot of pics of other zage installs, i know there are a bunch from that indonesian guy that posts up here.
Thanks Nexus, will be looking into those tools. I don't think the diameter of the downpipe + exhaust is an issue, it looked to be a perfect fit. I've never heard of running open downpipes either, and the way it sounds scares me lol. Otherwise, let's talk piping.

Zage install, Day three.

I only had about two hours to work with today so little got done, but piping is FINISHED! 😁😁😁

Lots of little fitment issues once again, starting with this one.
Picture not included in this copyPicture not included in this copy

Had to really study the Zage install pictures to figure this one out. I realized they removed the black plastic to the left of the radiator. So I did the same (sort of)
Picture not included in this copy
Drilled/hacksawed/handsawed/whatever to cut a bit of the plastic away.

Here you can see where the piping off the turbo connects with the pipe in the above picture.
Picture not included in this copy

Decided to save the intercooler for last (and glad I did), and jumped to the TB now.

Firstly, cheapo CAI coming out
Picture not included in this copy

Preping the TB piping
Picture not included in this copy

TB piping on
Picture not included in this copy

The pipe that goes from TB pipe to intercooler was wacky shaped, so I had to play with it a bit, basically I first thought it was going to go where this black tab is (not the bumper support).
Picture not included in this copy

Turns out it goes through the lower part of the bumper support. I had to cut off part of the plastic. Here it is before mounting it up, in approximately the right spot.
Picture not included in this copy

And mounted up
Picture not included in this copy

Finally the intercooler... Unfortunately, fitment sucks.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

As you can see by the last picture, the intercooler isn't even CLOSE to the steel bumper support. I have no friggin clue how I'm going to attach this thing. With the silicon clamps on it's pretty solid, but I'm not happy with just that. So far the only idea I had was to JB weld the bottom to where the bolt holes are for the skid plate. Again, I'm open to thoughts. I'd also like to point out that it seems like my solution to everything is JB Weld. 😉

So... I'm getting pretty close guys. Need to solve the aforementioned problem, tighten the mani bolts, then all is left is to run the lines. I'm hoping tomorrow is the day, however the weather seems to disagree with me. 😠

Gonna try to set something up so I can work, I have all day available so it'd be a huge waste.
eTiMaGoBangkok, Thailand · Aug 21, 2010#105
what are those nubs at the top and bottom? can you screw stuff into that? then some brackets might do the job!

or, big ol zip ties 👍

or, leave it as-is, and if anyone asks, tell them lopsided intercoolers are all the rage in Japan...
sleey0PA · Aug 22, 2010#106
I am sooo jealous. Never owned an FI car and it is my dream:D Part of the reason why I bought a near-new car for $8k was to save money for mods like this. lol

Good luck and hope it works great!!!x
Focus_Sh1ftThread starterNew Jersey · Aug 22, 2010#107
Originally Posted by eTiMaGo ↑
then some brackets might do the job!
This is why I post here. THANK YOU! It's such a simple solution but I hadn't thought of it. Just need to trim the bottom of that steel bumper support slightly.

Oh and, last time I checked, lopsided intercoolers weren't cool ANYWHERE. 😆

The obvious solution would be to make the car lopsided, am I right? 😎
pimp my yarischicago · Aug 22, 2010#108
Check cdydjded profile pictures he has some good pics of the very simple brackets he made to mount the intercooler. I did the same thing. Very solid. I also mounted the top with a thin strip of thick sheet metal bolted to those nubs on the cooler and to the bottom of the inside of the bumper bar.
pimp my yarischicago · Aug 22, 2010#109
I also had to removed all the plastic crap as well. I also had to trim some sheet metal off the core support to get my pipes to fit on my intercooler and mount it straight. I used pneumatic scroll saw to do this quickly. But U could mabe use a electric sawzall too. The most important part is if you get frustrated just walk away and have a beer. It always brings on a good idea.😁
Focus_Sh1ftThread starterNew Jersey · Aug 22, 2010#110
So I just went outside to check my car. The stupid tarp collapsed and water got all over the manifold. It looks TERRIBLE. Like rust tbh, I'm hoping it's just the heat-resistant paint reacting? Thoughts?
sleey0PA · Aug 22, 2010#111
How could it rust overnight?

Highly doubtful.
Focus_Sh1ftThread starterNew Jersey · Aug 22, 2010#112
Exactly as I thought, but the iron cast appears to becoming iron oxide. I don't think it's an issue at the moment, but I'm worried it'll spread. I was thinking about it too and it would probably get like this anyway once the exhaust is run through it for long enough. I'll post a picture later.

Unbelievably, one of my flange nuts snapped as well. It's still threaded for the most part, so I'm probably going to leave it and loosen all the others slightly. Clearly today was a bad day to work on it, so I canned it for now. 😛
Nexus1155Dorchester · Aug 22, 2010#113
Yeah man today was a bad day to wrench in New England, rain sucked. went to harbor freight thats 10 miles down the road, legit took 4 hours to get everything and get out, and i still didn't get this dirtbike were playing with started.

Anyways, it may oxidize a bit, but you will be fine as long as nothing got into the engine itself that is. There will always be moisture back there somehow sometimes someway so it is bound to happen wether you put water on it or not unless you coat it with ceramic coating.

Have you ever seen a manifold stay perfect looking?🙄
Focus_Sh1ftThread starterNew Jersey · Aug 23, 2010#114
Day 4

Alright guys, I'm so close... But I'm soooo beat. 👎

EVERYTHING is installed. At this point I'm waiting for the sealant on the Zage oil pan to dry so I can put my oil back in. Yeah, I decided to use it afterall.

To start, here's a picture of the cast iron rusting
Picture not included in this copy

Started the day off trying to mount the intercooler. Whipped up these brackets.
Picture not included in this copy
Couldn't drill through the bumper support, so I gave up for the time being. That steel is THICK.

Started working on the oil feed and return.
Picture not included in this copy
Picture not included in this copy

I got the pan off, then for whatever reason decided to use the Zage oil pan afterall. The comments I made about it's design still stand, and I pray it works. Firstly, here's some pictures of it.
Picture not included in this copy
Picture not included in this copy

But instead of just putting it on, I brainstormed how to guarantee there wouldn't be an problems. I basically did two things that will hopefully allow gravity to constantly return oil.

I made sure the elbow angle didn't go any lower than what's seen here.
Picture not included in this copy

Then I made a cut in the engine block to allow for a slightly more diagonal orientation of the return line, other than the horizontal way the line would have ran.
Picture not included in this copy
Picture not included in this copy

I poured some oil in after the pan was installed, but it leaked everywhere. I used silicon sealant to seal all bolts and the edges of the pan.

Oh and a quick aside, here's one of the impossible to reach manifold bolts.
Picture not included in this copy
I finally was able to get an open wrench on it (barely) to get it somewhat tight. There was no way it was happening from the top of the car.

Ok so once the pan was done I worked on installing the bypass line for the BOV.
Picture not included in this copy

That was easy peesy. The coolant lines sucked (and so do these pictures).
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Installed the air filter and MAF last.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Reinstalled AC lines so they're not just floating around. Also, here's a picture of my sweet zip tie hanger for the O2 sensor wires.
Picture not included in this copy

Finished the day off by pulling the spark plugs and EFI fuse.
Picture not included in this copy
Picture not included in this copy

So weather permitting, tuning day will either be tomorrow or Wednesday. Assuming there's no leaks when I re-add the oil, I'll crank the starter and look for oil leaks in pressurized areas. Then I'll pull the oil return real quick to make sure oil is present. Finally I'll start the engine and look for any and all air leaks (plan to get a video of that moment 😛).
Nexus1155Dorchester · Aug 23, 2010#115
methinks you might end up melting that O2 sensor cable if its not wrapped in something. Other than that, good post! can't wait to see more.
Focus_Sh1ftThread starterNew Jersey · Aug 24, 2010#116
Originally Posted by Nexus1155 ↑
methinks you might end up melting that O2 sensor cable if its not wrapped in something. Other than that, good post! can't wait to see more.
Yeah it is a bit close, but it wasn't much further away from the stock header either. I bought like $50 worth of heat wrap so I guess I'd be silly not to wrap that too 🙄
pimp my yarischicago · Aug 24, 2010#117
Cant wait to hear how it drives.
Focus_Sh1ftThread starterNew Jersey · Aug 24, 2010#118
Originally Posted by pimp my yaris ↑
Cant wait to hear how it drives.
I can't wait to SEE how it drives. 👍

I'm ready to start the car / crank the engine, but I'm currently doing battle with Zage's pan. This thing sucks. It's barely leaking at the moment from the side of the pan where the two nuts go on, but they don't fit on the Zage pan. Even after doing some drilling to try to get them to thread the stems I've had no luck. Waiting for my silicon + JB Weld to dry and see if I finally have a seal, after having to take it off again earlier.
why?harnett county NC · Aug 24, 2010#119
Originally Posted by Focus_Sh1ft ↑
I can't wait to SEE how it drives. 👍

I'm ready to start the car / crank the engine, but I'm currently doing battle with Zage's pan. This thing sucks. It's barely leaking at the moment from the side of the pan where the two nuts go on, but they don't fit on the Zage pan. Even after doing some drilling to try to get them to thread the stems I've had no luck. Waiting for my silicon + JB Weld to dry and see if I finally have a seal, after having to take it off again earlier.
Ouch, so the part about Zage's oil pan being terrible are true. Still even with that it is a darn good deal.
YodaFL · Aug 24, 2010#120
Originally Posted by Focus_Sh1ft ↑
I can't wait to SEE how it drives. 👍

I'm ready to start the car / crank the engine, but I'm currently doing battle with Zage's pan. This thing sucks. It's barely leaking at the moment from the side of the pan where the two nuts go on, but they don't fit on the Zage pan. Even after doing some drilling to try to get them to thread the stems I've had no luck. Waiting for my silicon + JB Weld to dry and see if I finally have a seal, after having to take it off again earlier.
wishing you nothing but the best and no boom. Remember to prime it up
Focus_Sh1ftThread starterNew Jersey · Aug 25, 2010#121
Originally Posted by why? ↑
Ouch, so the part about Zage's oil pan being terrible are true. Still even with that it is a darn good deal.
Yeah, but this is an entirely different reason. Honestly, this is the only fitment problem that has really been a deal-breaker for me.

Originally Posted by Yoda ↑
wishing you nothing but the best and no boom. Remember to prime it up
👍

IF I ever get to that part...
Just poured in some oil and guess what

LEAKS

Here's a quick time line of emotions: 😲😳😠🙄🙁🤷😢
then of course: 🍻

I sealed the whole inside edge of the pan this time, so I honestly don't know what to do. I drained the oil again and put some more sealant on the outside edge of the pan. This is exactly how things went last time. I fought a losing battle against leaks... I guess this time I'll be sure I give the silicon plenty of time to atleast tack? 🤷

Anyways, I've run out of things to do. Here's all that was left to do today (I can't reach the turbo / manifold with heat wrap while the car is raised).
Picture not included in this copy
Picture not included in this copy

So... yeah. I was originally going to do the oil feed and return first. I'm glad I didn't, because this whole situation is VERY discouraging.
coheedMaiden, NC · Aug 25, 2010#122
This maybe a stupid question, but was the surface being sealed clean before you put the pan on? Seen a few people try to put new oil pans on with out taking old gasket material off the surface before. Not saying your dumb just posing the question.
Focus_Sh1ftThread starterNew Jersey · Aug 25, 2010#123
Originally Posted by coheed ↑
This maybe a stupid question, but was the surface being sealed clean before you put the pan on? Seen a few people try to put new oil pans on with out taking old gasket material off the surface before. Not saying your dumb just posing the question.
Yeah, it was as clean as it was going to get. The problem ultimately is that because there are 2 nuts that won't fit, the pan isn't clamped properly on the right side of the plan. With that said, the leaks are still only very small. There really should have been a gasket included with the zage pan (or even a factory one). I'm thinking if this sealant fails again, I'll try JB Welding the pan on (which should solve that clamping issue). Worst case, I'll fashion up some sort of gasket.

It's so frustrating to be stuck because of a minor leak that I simply can't plug...
Nexus1155Dorchester · Aug 25, 2010#124
What kind of sealant are you using.

Take some pics of the area that is bad and how bad the holes are not lined up, maybe we can think of something to help you out.

I've only used JB Weld once on my car is when the mounting hole on my charge pipe came off -_-
advocatelocation · Aug 25, 2010#125
giant zip ties on the intercooler is DEFINITELY ftw
YodaFL · Aug 25, 2010#126
Originally Posted by advocate ↑
giant zip ties on the intercooler is DEFINITELY ftw
Keep an eye on it tho. That friction with the metal frame on top over time, will start to slowly shred it away.
Bluevitz-rsOshawa, Ontario, Canada · Aug 25, 2010#127
I don't know your process for mounting the oil pan but here's how they should normaly go on...

1. clean everything with a clean rag and make sure there is no oil were the silicone will seat.

2. lay a bead around the pan about 1/8" thick making sure you go all the way around the bolt holes.

3. when assembling, only snug the bolts enough to start pressing the silicone out the side.

4. let dry.

5. tighten the bolts to spec. (probably around 15-20 ft/lbs. not very tight)

Even if the pan is warped it should still seal with the method.
Focus_Sh1ftThread starterNew Jersey · Aug 25, 2010#128
Leak is dealt with.

I'm currently having issues priming the turbo though. Pulling the EFI fuse and spark plus didn't cut it.

I'm also worried to continued because at this point I most likely am flooding the engine with fuel, even after pulling the injector plugs.
Focus_Sh1ftThread starterNew Jersey · Aug 25, 2010#129
Car started AND............






👍😁😁😁😁

You guys gotta hear this thing! I'll take a video later. I currently have a small leak coming from the banjo bolt, and atleast one of my coolant lines is leaking.

My only concern was that the manifold / turbo / downpipe began smoking, but I think that may be the iron oxide burning. Definitely would like to hear some feedback regarding that.
ParmasML · Aug 25, 2010#130
Originally Posted by Focus_Sh1ft ↑
Car started AND............






👍😁😁😁😁

You guys gotta hear this thing! I'll take a video later. I currently have a small leak coming from the banjo bolt, and atleast one of my coolant lines is leaking.

My only concern was that the manifold / turbo / downpipe began smoking, but I think that may be the iron oxide burning. Definitely would like to hear some feedback regarding that.

If you used Silicone Heat resistant coat and wrapping on exhaust these are surely the ones making that smoke. This smoke will last till 15minutes and would normally happen only at the first heatup after installation so be cool 👍
Focus_Sh1ftThread starterNew Jersey · Aug 25, 2010#131
Originally Posted by Parmas ↑
If you used Silicone Heat resistant coat and wrapping on exhaust these are surely the ones making that smoke. This smoke will last till 15minutes and would normally happen only at the first heatup after installation so be cool 👍
Thanks man, that makes me feel sooo much better. 😁

Just to clarify, a turbo timer shouldn't be necessary since I have the turbo water cooled, correct?
coheedMaiden, NC · Aug 25, 2010#132
Originally Posted by Focus_Sh1ft ↑
Thanks man, that makes me feel sooo much better. 😁

Just to clarify, a turbo timer shouldn't be necessary since I have the turbo water cooled, correct?
No a timer is not necessary if its water cooled. I would still let it idle about minute/ minute and a half before cutting it off. But thats just me, I'd rather be safe then sorry. 🤷
YodaFL · Aug 25, 2010#133
Originally Posted by Focus_Sh1ft ↑
Leak is dealt with.

I'm currently having issues priming the turbo though. Pulling the EFI fuse and spark plus didn't cut it.

I'm also worried to continued because at this point I most likely am flooding the engine with fuel, even after pulling the injector plugs.
Not sure what you mean here. What happened? How many times did you crank it and for how long at each interval? Its an important step considering how fast the turbo is gonna spin at startup with no oil. Did the oil not get tru the lines?
ParmasML · Aug 25, 2010#134
Originally Posted by Focus_Sh1ft ↑
Leak is dealt with.


I'm also worried to continued because at this point I most likely am flooding the engine with fuel, even after pulling the injector plugs.
I am not sure what you need to say with this sentence. There is no way the engine is flooding with fuel with the injector plugs pulled out unless:

1. The engine is already flooded with fuel with the previous cranking of course with the plugs connected.

2. If the plugs are replaced to colder side ones because of turbo, it is normal that engine do not start immediately or else the same like when you had the stock plugs. If the plugs are replaced, use the stock plugs to ensure good startup and then change them later. The important thing is not to drive with boost on stock plugs.

3. Plugs could be wet with fuel effecting spark. Remove and clean all 4 with a wire brush in the meantime check the plug gap is within tolerance.

There could be more reasons but one of these should solve the problem.
Focus_Sh1ftThread starterNew Jersey · Aug 25, 2010#135
Currently waiting for my JB Weld to dry, lemme explain a few things.

Originally I thought I was flooding the engine because the engine bay smelled strongly of gasoline, even after pulling the EFI fuse. I then realized there were actually two EFI fuses, so I pulled them both. I also had the spark plugs unplugged.

The reason it wasn't priming was because originally I was only cranking the engine for about 5 second intervals (I was afraid I would kill the battery). The oil pump must not have had enough time to work because when I cranked it longer, my oil pressure gauge finally began building pressure around 10 seconds.

Once I had that figured out, I cranked the engine 6 times for 10-15 seconds, or about however long it took oil pressure to build to 20 psi. I knew it had reached the turbo because I had oil that had leaked onto my coolant line. So that was arguably the first leak I've ever been happy to see. 😎

So at this point, I'm currently just cleaning up any remaining leaks. Should be able to get tuned tomorrow, and (hopefully) later I'll run up to Advance Auto and get my CEL code read. Most likely has something to do with the MAF or O2... Not surprised to see it though.

Also, I've figured out exactly what the smoke is - leaking oil burning. That should be solved shortly. 👍
YodaFL · Aug 25, 2010#136
keep on keeping on... you almost there
Nexus1155Dorchester · Aug 26, 2010#137
Start the freakin car! I did not & have never primed a turbo
We have and have known people who have started a car without priming the car and they ruined the turbo or blew seals, if you drain the oil, it doesnt instanly just get oil. It takes a little bit to get up to the turbo. It makes sense doesn't it? Oil doesn't just shoot up there at lightning speed. Some places even prefill there turbos with fluid just so it is lubricated when you install it, most just come dry as a bone.

Another way to do it is to remove the connectors to the ECU and it won't start just crank.

Usually smoke burning off is also from working on the hot area with oil or another substance on your hand needs to burn off, but like someone said it could be header wrap or paint too. ( Well I wrote that for nothing since I just read the last part of your post lol)

Glad to see its working well for you :D
cali yarisCanoga Park, CA · Aug 26, 2010#138
yay "almost" welcome to the Club 😁
Focus_Sh1ftThread starterNew Jersey · Aug 26, 2010#139
I definitely agree with priming ANY turbo. It's easy to do and there's a million ways to do it, so why not?

Nexus, reading your post reminded me of something interesting I noticed when I first inspected the turbo. I think Zage sent me a "pre-primed" turbocharger. There was oil on it, and at the time I immediately dismissed it because I thought it had simply come off my hands. Eh, doesn't matter now. 😁

Current progress: all coolant leaks are sealed. Have a very slight leak coming from the banjo bolt that I resealed again, so that should be covered. The return flange on the turbo is leaking quite a bit of oil though... Will address that tomorrow... er, later.

Oh and also... My CEL disappeared, once again. So it was probably that supposed TB code I seem to get every time the ECU is reset. Should be interesting to see if I get another one when I start driving around.

Originally Posted by cali yaris ↑
yay "almost" welcome to the Club 😁
🙇

Man did I earn it. 😉
Nexus1155Dorchester · Aug 26, 2010#140
Yeah man, why not take precautions? Honestly. It's a car, what can go wrong will go wrong. In the S4 I need to take the engine out to swap turbos, and the lines need to be in specific places or they will melt from excessive heat. It's little things like priming the turbos gives peace of mind not having to go through BS removing and installing them again. I just ran without a cluster to see if it will work and run, apparently my oil pressure was low, no cluster, no lights. KNOCK KNOCK KABOOM goes one of my rods.

Yeah, the turbos usually have little caps on them, one time one was full of oil and just spilled all over my lap.

-_- the coolant line you JB Welded? Is the oil return gasketed?
Focus_Sh1ftThread starterNew Jersey · Aug 26, 2010#141
Still (patiently) battling an oil leak from the turbo. I'm not entirely sure where it's coming from... There's definitely a small leak at the least from the banjo bolt, but I still don't know about the return flange. I've used like half a tube of JB Weld at this point lol... I think the problem is the leak is in a spot that I can't reach.

And yes, the oil return has some sort of gasket.
Focus_Sh1ftThread starterNew Jersey · Aug 27, 2010#142
Originally Posted by cdydjded ↑
Where is it that you are using the JB Weld? If it for the fittings you problem lies there. JB Weld is not intended for that use...
I'm trying to seal the edges of the fittings. I know it isn't exactly how it's supposed to be used, but it has worked.

What I'm currently thinking is the way the return line is setup is causing a huge oil buildup, thus causing a large enough rise in pressure to finally leak out of the return gasket. It's the only thing that makes sense at the moment... I made sure all my seals were VERY tight.
ParmasML · Aug 27, 2010#143
Originally Posted by Focus_Sh1ft ↑
I'm trying to seal the edges of the fittings. I know it isn't exactly how it's supposed to be used, but it has worked.

What I'm currently thinking is the way the return line is setup is causing a huge oil buildup, thus causing a large enough rise in pressure to finally leak out of the return gasket. It's the only thing that makes sense at the moment... I made sure all my seals were VERY tight.
VERY is NOT always good for seals. An example of an oil filter VERY tightened will probably if not sure that you blow your seal and leaks almost immidiately with no pressure at all.

Just a hint!
cali yarisCanoga Park, CA · Aug 27, 2010#144
What I'm currently thinking is the way the return line is setup is causing a huge oil buildup, thus causing a large enough rise in pressure to finally leak out of the return gasket.
I doubt it. I had a return line on my tC that was too small and would back up. The oil would back up into the turbo and cause smoke. Definitely didn't blow any seals, there isn't any pressure in the return line. I'm pretty sure it just gravity feeds down to the pan, right?
Focus_Sh1ftThread starterNew Jersey · Aug 27, 2010#145
Based on what you guys have said and what I've read, I'm pretty convinced I over tightened the flange and thus damaged the gasket. I was watching the oil while my car was idling and that's exactly where it was coming from.
Nexus1155Dorchester · Aug 27, 2010#146
well atleast its an easy fix, alot of places have Mr. Gasket material. I'd even ship you some if I didn't give the rest to my DSM buddy, but im sure you want it fixed ASAP too lol. The stuff I had for gaskets might have been a little too intense for just a drain though.

Hurry up and fix it so we can see some vids!!!! :)
pimp my yarischicago · Aug 27, 2010#147
I would buy some paper gasket material from local auto parts store and cut it to the shape you need. Then coat it with a light layer of rtv silicone sealent. Then reatach and dont overtighten the bolts. If its to tight the gasket will just squeeze out the sides. Good luck Jerzy
Focus_Sh1ftThread starterNew Jersey · Aug 27, 2010#148
Originally Posted by pimp my yaris ↑
I would buy some paper gasket material from local auto parts store and cut it to the shape you need. Then coat it with a light layer of rtv silicone sealent. Then reatach and dont overtighten the bolts. If its to tight the gasket will just squeeze out the sides. Good luck Jerzy
Worst case I'll be doing that. I'll have to chisel off the JB Weld but eh. The banjo bolt is definitely leaking as well, and I can't reach it with sealant.

If you guys haven't figured it out, I'm desperate to NOT have to pull the turbo back out. The thought of doing that... 🤮

Yeah and Nexus, I'm as eager as you are dude. I have a boosted Yaris sitting in my driveway, and the only thing stopping me from driving it is a tiny oil leak. 🙄

EDIT: Forgot to mention I'm already almost done putting together my install guide, if anyone is interested. I tried to make it as comprehensive as possible.
Focus_Sh1ftThread starterNew Jersey · Aug 28, 2010#149
Got home from work, I seem to have drastically decreased leakage at this point SO...

Took the car for a spin...

Drove conservatively to get some premium gas...

Then immediately burned out of the gas station where by I almost got pulled over! 👍👍👍😈

I'm honestly at a loss for words at the torque I get. THIS IS THE COOLEST THING EVER LOL. Can you tell this is my first time in a forced induction car? 😛

So anyways, I noticed I was getting 1-2 pounds of boost at about 2300 rpm, and at 3000 rpm I was up to 6 (the zage wastegate is set to .5 bar = 7.25 psi). In other words, this is PERFECT.

I'm convinced every cut and bruise, as well as every penny spent, was more than worth it. Can't wait to get familiar with my new car. Is this thing really still a yaris? 😁
kounj · Aug 28, 2010#150
🙌