I think I know what you're talking about.... i'm paranoid about backwaves.Originally Posted by sqcomp ↑Oh no. Don't get me wrong. Looking at it, there will be a pod. It's just going to vent into the sub frame from behind the woofer. You'll understand it when you see it.
SQcomps install
403 posts · 83,895 views · page 5 of 9
Replies continued
Originally Posted by sqcomp ↑I was sort of embarassed not having the entire thing done so that I could give auditions. Still, you guys have seen that I'm not just some poser. I really am trying to be the best sounding Yaris in the world.
Nobody thinks you are a poser.
You are doing some serious work to that Yaris.
I'm sure your results will be worth all the effort you are putting into it.
You may not win contests with it, but you will certainly have one of the best sounding Yarii on the street!
I love 4-way setups. Those 8's are sexy.
That competition system I heard at our local shop a long time ago was a 4-way system.
He had tweets, 4", 6.5", and four 10" subs on the rear deck in a ported enclosure. Cones and ports were on the deck.
The component speakers were in custom pods down at the front kick panels, angled upwards towards the listener.
Nothing in the doors, or A-pillars. Lots of dynamat. The car was an Olds Cutlass 4-4-2. Like an early 70's model.
I seem to remember he was using Clarion, Earthquake, Planet Audio, and some other brand I can't remember.
The one thing I do remember is: no matter how loud you cranked it, the sound was crystal clean. And those four 10's hit like a jackhammer in the chest.
Best system I ever heard. He used it primarily as a demonstrator for the shop. He was the shop manager/lead salesman.
I also remember he tore it all out, and did a totally different install not long afterwards. I never got to see or hear what he did next.
*
imma laugh my ass off if you come in 2nd place in the first two or three sq comps you go to (that have more than 3 people show up).Originally Posted by sqcomp ↑May not win competitions you say? Oooohh! I beg to differ. Remember, this system is NOT finished by any means. I've got a ways to go. The biggest part will be the tuning. I've only touched a basic TA and have a flat EQ right now that hasn't been measured on an RTA. Thankfully I have the West coast teammates, Jim, and Justin to help me tune.
Originally Posted by sqcomp ↑May not win competitions you say? Oooohh! I beg to differ. Remember, this system is NOT finished by any means.
All I meant was, even IF you don't win 1st place at competitions you enter, you should still be proud and satisfied with everything you have done.
You certainly have a good chance to do well in competition. You are using premium components, and you are taking the time to work out all the details.
*
And we have You, Taln, Alien, Herb, Kaotic, typicaljawaiian808 and MANY others here in YarisWold that make this site...
AWESOME
AWESOME
*
Yeah! I know, there is something special about this little speaker...Originally Posted by sqcomp ↑You know what's going to be awesome? Your hertz setup when you finish up!
🙇Picture not included in this copy
can't wait....
.👍
I'll just leave this here... try not to get too much drool on your monitor.
Picture not included in this copy
Picture not included in this copy
*
5 days with no posts. How's it coming?
*
*
Looks nice SQ,
What materials and where can I get to do something like that? not that I'm doing kick panels like you, but I'm trying to design the mids and tweets at the A pillars.
thanks!
(o:
What materials and where can I get to do something like that? not that I'm doing kick panels like you, but I'm trying to design the mids and tweets at the A pillars.
thanks!
(o:
*
I like your idea to build from under the kicks like that,good idea,will come out much easier to attach it all together......keep them pictures coming.
*
*
*
Ha. I wanted to put some hornblasters in my yaris...
...I'll put them in my taco now lol.
p.s. that's the same fabric I used... i think. you get it from walmart?
...I'll put them in my taco now lol.
p.s. that's the same fabric I used... i think. you get it from walmart?
*
*
I'm back.... 2500 miles later.... Saw you got your kicks going... life is sooo much better with midbass.
*
Pictures or it didn't happen......lol
*
*
you know.... considering you're all sq and show quality and such... why not go with a transistor switch instead of a bosch relay? More reliable than mechanical relays. Just a thought.Originally Posted by sqcomp ↑Got the second kick going. I also bolstered the passenger's kick with some Lizard Skin on the inside. I also wired up the 2.9...all I need now is a remote wire relay for the amps...
Pics to come...
*
This is looking great......thanks for the pictures of it going in.....it makes it easier to understand how much work is going into it.....lizard skin looks like it would go a long way.
*
It's not going to look like this when you're done is it? 😁
Picture not included in this copy
Just kidding, looks like quite the project though.🎉
Picture not included in this copy
Just kidding, looks like quite the project though.🎉
Good luck with the testing/interview process, I start next Tuesday.Originally Posted by sqcomp ↑Anytime. Tomorrow I'll finish the other kickpod up AND seal up the original pod. I'm hearing tighter response from the sealed pod. I'll also mess with some wiring that is causing some panels to flex. I MAY, depending on time, get the sub enclosure working. If not tomorrow, it should be by Saturday. After that enclosure goes in, I'll be taking the long arduous steps of making panels, finishing the pillars and pods, and making the wiring all pretty. That will probably take a month. After that it's seat time. I can't wait to get this thing under the Auto EQ and Auto TA functions. I've got some massive glare in some upper frequencies. It's enough to make you cringe...even as off axis as I have those tweeters. Again, EQing and perhaps a dash mat will help that.
I can't imagine what these L1 Pro SEs would do on axis. I'd say just under the level of horn's abilities to make your ears bleed. There's just NO need for me to play them on axis, they've got GREAT sparkle at 45 degrees.
I've got a busy week. Testing for Yamhill County, interviews...
I'm not surprised to hear you decided to go sealed, the tightness offered by sealing a midbass is awesome. I think there really are only two reasons why somebody shouldn't seal up a midbass...
1) The driver can't play the low stuff with much authority and needs the help of an IB enclosure
2) To make a sealed enclosure is just too much work in the given space/install.
You should also gain a bit of efficiency I'd think by going sealed, tho you will also get a slightly quicker rolloff (which doesn't matter cause you have a sub).
*
*
Incredible! one of a kind Yaris!
Do you get snow in the winter?
Congratulations on your new house, how is that working out?
D.
Do you get snow in the winter?
Congratulations on your new house, how is that working out?
D.
*
.
Just staring at this picture "SOUNDS GOOD"!!! 👍
Picture not included in this copy
.
(O:
.
Just staring at this picture "SOUNDS GOOD"!!! 👍
Picture not included in this copy
.
(O:
.
*
*
Originally Posted by sqcomp ↑I sound like I'm talking about the Death Star!
As much time and money as you have wrapped up in this system, you could have built a DeathStar!
😁
Just kidding.
It's looking really sweet. I can't wait to see how you finish the trunk.
( I had a feeling you were gonna polyfil that sub enclosure, cuz it looks kinda smallish to me, for that size sub )
Did you just remove the rear deck stock speakers to use as your cabin ports?
Or did you make a custom rear deck back there?
I hope you deadened the fuck out of that rear deck.
*
*
If you got a great SQ sub with no harmonic distortion, and no resonating panels in your car you can't.... but how many people can say that?Originally Posted by sqcomp ↑I did remove the back speakers. I REALLY like how the midbass is able to bring all the bass (including the sub bass) all up front. I know how people say that you can't localize sub bass...but you can, especially if you've got a poorly setup/staged system.
DIAL DOWN MIDBASS... what a sin... how bout EQing in a 10dB boost at 100hz? hehe.Originally Posted by sqcomp ↑Taln...
DUDE! You're going to LOVE the lack of vibration in the entire car! I was so suprised on how dead the car is. When you see it next, you'll have to take a gander at the bottom of the rear deck. The top is almost untouched. The bottom is a different story. A layer or two of roadkill and some 1/2" Dynaliner around the OEM speaker mounts. I'll have to reserve my judgement until all the interior is back in...still, it seems like it's all about cabin gain for me. The gain is as low as I can have it, it's not overwhelming at all. That being said, the bass is authoritative and clean. I'll be performing the auto EQ and TA this week. I've had to dial down the midbass. That's pretty much about it. We'll see what an RTA says.
I look forward to it.
EDIT: Tell scott to put binding posts on those speakers... I hate quick connect terminals. Give me the cool binding post terminals that use a hex screw.
*
My favorite systems are 4-way systems.Originally Posted by sqcomp ↑The midbass backed up by the sub? Oh MAN! Surgical is the word.
Are you going to track down and kill that external rattle?
Would that effect your performance in a competition, or do the judges only judge the sound INSIDE the vehicle?
Just curious.
as long as they don't hear the rattle inside the car he's fine.Originally Posted by Alien Mantis ↑My favorite systems are 4-way systems.
Are you going to track down and kill that external rattle?
Would that effect your performance in a competition, or do the judges only judge the sound INSIDE the vehicle?
Just curious.
*