Yarisworld Archive

SQcomps install

403 posts · 83,895 views · page 2 of 9

Replies continued

derickveliz2Central, MA · May 1, 2010#51
Love it!

What are you going to paint? I'm a little sleepy and didn't get that part.
goku87AK · May 2, 2010#52
4) Why paint it? you should wrap it in CF.
5) Would there have been enough room for a scanguage to fit in that bottom section?
talnlnkyThread starterSpokane, Wa · May 3, 2010#53
I see the teammate with the FIT switched to a MkII JBL GTI... should net better scores. The GTI's with the split gap motor had a very flat Bl curve... low distortion, and one of the lowest inductance ratings I've ever seen on a sub. Great SQ woofers if put in the right box.
talnlnkyThread starterSpokane, Wa · May 3, 2010#54
Originally Posted by sqcomp ↑
Update:

It looks like my theory works! The MEK mixed with ground up plastic flecks from the kit extras seems to fill in very well. As of this moment the kit's seams are filled and waiting for the cure which is coming along nicely. I have pics to follow this evening.
By MEK, you're talking about the hardening agent used in glass work... correct?
_S7V7N_South Texas · May 3, 2010#55
👍
derickveliz2Central, MA · May 4, 2010#56
I have a question that comes to my mind because of my lack of knowledge...

You are going to have two 15" subs in the trunk, two 8" (mid-base) on the kick panel, two 4" or so mids up front near the pillars with two Tweeters, right?

and 3 amps! how are you going to connect all of them, my set up for example lets me to have Woofers, Mids, and Tweeters. But when I try to add one more drive, my equation goes no where )o: and here is the question: "At what point you divide in 2 one signal? or how it's done"?

sorry it might be a very naive question, but I would like to add a couple of 4 inch speakers to my system but I don't know where this extra channel comes out and still have control.

Thanks.

D.
talnlnkyThread starterSpokane, Wa · May 4, 2010#57
I met up with SQcomp today (was in portland testing for a job)... Deck trime piece looks nice. He had just put some Rage gold (high quality bondo/filler) and was waiting for it to harden so he could sand it.

Fun guy to meet in person.


Derick, there is afaik, only one good way to get multiple speakers(of different kinds) to play on a single channel... and that is by using a passive crossover (which are made up of coils & caps, and sometimes resistors). You define a point, say 3000hz, and you design a passive x-over to split the signal into two signals, a high, and a low, with the cutoffs being at 3000hz. now you can run that signal to your tweet (3000 and up), and the other to your mid (3000 and down).

you could technically run both drivers off the same amp without a crossover, but then you'd run into a few problems. Lets use an example of a 100x2rms amp for mids & highs. Your tweet is 4 ohm, and so is your mid, without a crossover your amp would see a 2ohm load instead of a 4ohm load... (makes the amp work harder. Also, your tweet would receive the same frequencies, and the same amount of power as your mid... Tweeter go TWEET TWEET TWIZZEEET.... _______________ (nothing). You'd also probably get some weird cancellation issues (mainly in the upper mid to high frequencies) which could wreak havoc on your frequency response.


I can't remember off the top of my head how john is going to set up his drivers & channels... tho, I thought he said he was doing fully active... meaning he won't need to use passives at all.


For my install, I've got a custom 3-way component + 2 amps... I have an active crossover that will split the signal between the mids+highs & the Midbass (cutoff around 200hz). The tweet & mid will have a crossover, tho... since my mid is a full range, I may or may not use a low pass on the mid... the tweet will have a highpass, and that will probably be set around 5-10khz... but it really depends on if I put a lowpass on my 4's or not.
goku87AK · May 4, 2010#58
Clearly we need to get a mod in here to delete some of these pictures because that looks like sex...
goku87AK · May 4, 2010#59
Ahh, you have no idea how hard I just laughed at that first sentence lol.

I reeeeeeeeeeeeeally want to see this enclosure, because it's obviously going to be wicked awesome.

Just curious, where is the proposed plexi going to fit into all of this?
goku87AK · May 5, 2010#60
Stop editing your post. I had to redo this one like three times because you kept adding stuff lol.

"We're thinking of painting the amp rack the same color as the grey trim of the radio console and putting a couple LEDs in there to show it off." - i'm assuming the rack, yes? you should make them blink to the beat. Nothing says rice quite like LEDs that light up with the music.

Heck if you did that, you should get the triColor LEDs, then use the red for low frequencies, green for mid, and blue for high (see how I picked the colors vs audio freqs, because red has longest wavelength, and blue is shortest? I'm clever).
goku87AK · May 5, 2010#61
Oh yeah, don't think I ever told you, but welcome home.
goku87AK · May 6, 2010#62
Originally Posted by sqcomp ↑
Last edited by sqcomp; Today at 01:16 AM. Reason: ...Because it annoys the $hit out of Goku...
Jerk lol.

Did you decide on what LEDs you wanted to get? Because I'm telling ya, that was a pretty epic idea I had...
goku87AK · May 7, 2010#63
Every hertz I've heard at the local dealer here has sounded pristine. If he's cutting you a good price, then I say go for it.
talnlnkyThread starterSpokane, Wa · May 7, 2010#64
Originally Posted by sqcomp ↑
He's selling me HARD on using a dual 4 Ohm 15" High Energy sub for the setup instead of the two ID 15"s. I've just never heard one before. Hmmm...Like I said, things chage FAST!
Since you are running sealed, the subs are more likely to hit x-max.. cause sealed boxes allow for subs to move a lot when playing down low... This means a FLAT BL curve is even more necessary than if you were running ported.

Scour the net for Dumax/Klippel tests for both subs to see if there are any BL charts for either... Manufacturers usually don't release that info, cause it will really show weaknesses if the sub has them, and the motor is usually the place to look.

I think there is a forum somewhere in which one guy has ran DUMAX on literally a hundred or so subs... I'm sure the ID has been done, in fact, I probably have an ID dumax on my computer somewhere.... i'll do some hunting over the course of the next week.
derickveliz2Central, MA · May 7, 2010#65
Originally Posted by sqcomp ↑
Derick:

Okay...my situation is fairly unique. I have massive control. The P-01 has four pre-outs, high, midrange, midbass, and subwoofer. Yes, I have three amps, a mono (subs), a two channel (midbass), and a four channel (midrange and high). The four channel has two inputs that I'll use to plug in the signal from the two pre outs for the highs and midrange. All I'm doing is using the 4 way electronic crossover that the P-01 gives me.

in your case you may look at capping your tweeter and going "quasi-active" with the amp's onboard crossover.

Oh yeah...
Sqcomp:

That is not FAIR 😠 your Head Unit it's so powerful! I'm jealous 🙁



so what does "quasi-active" means? to use the HPF on the amp?




Then I have 2 possible options, go for DEQ-9200 and have Tweeters / Mids / Sub.

Picture not included in this copy


or

buying something like yours and spend twice as much or more...

Picture not included in this copy
talnlnkyThread starterSpokane, Wa · May 7, 2010#66
You know there are products that do the same stuff that his deck does... maybe even better... and they are stand alone items. Audiocontrol has a gob of equipment from signal processing, Digital eq's & crossovers with memory presets so you can have different EQ settings and such. It might be a better & cheaper solution to get a bare bones deck & a stand alone signal processor than to buy a deck with all the bells and whistles built in.

http://www.audiocontrol.com/t34/Mobile-Audio.html

The digital stuff is very spendy tho... but if you start looking around car forums, or ebay you might find a good buy on used gear.
goku87AK · May 7, 2010#67
Originally Posted by sqcomp ↑
10 months of not spending any tax free money at all really helps my situation.
👍👍👍
talnlnkyThread starterSpokane, Wa · May 8, 2010#68
Originally Posted by sqcomp ↑
..."maybe even better"...

It's a big maybe to hurdle.

There is a good reason why I spent twice as much on the deck.
I was talking to him, not you.
goku87AK · May 9, 2010#69
Need... More... UPDATES!!!!!
DailyDriverutah · May 9, 2010#70
+1
derickveliz2Central, MA · May 9, 2010#71
Wow... I wish I had the time and expertise to do something like this... keep it up! and don't forget to take lots of pictures.
talnlnkyThread starterSpokane, Wa · May 10, 2010#73
Originally Posted by sqcomp ↑
It doesn't take much...just doing. 500 ml of resin, use maybe 5 cc's of MEKp type stuff. Instead of cutting your mat rip it so that you have frayed ends so that they blend better. Little things like this. It's been a few years since I did this so I wasted around 1000 mL of resin from making it too hot with hardener. You should have seen my first try! The damn resin was smoking. It actually singed the cardboard that was in the trash can. No $hit.
Bout 8 years ago I was glassing in the middle of winter... it was 20F outside, I had to use enough MEKp to make it smoke just to ensure the stuff got hot enough to cure. I had a few spots that didn't get hot enough, and they stayed goey for like two months. Since then i've decided not to glass anytime is below 40F.
sqcompBack at home · May 10, 2010#74
*
goku87AK · May 10, 2010#75
Originally Posted by sqcomp ↑
Uh-oh...i think goku called my subwoofer. Dammit! So much for secrets.
Lol well what gave it away really was the amp. Since you needed 900W @ 4 ohms (and I think you mentioned Hertz earlier too) it pretty much limited to one sub lol. Shoud be an awesome sounding sub though. :)
sqcompBack at home · May 10, 2010#76
*
Alien MantisArizona · May 10, 2010#77
Originally Posted by sqcomp ↑
What's going on in these pics is the install of the Stinger battery. I had to fab up a little bus bar to acommodate the factory plugs without cutting into the OEM wiring harnesses...which I am loathe to do. No, this is NOT the final With that being said, we're returning the LRx 1.1k and replacing it with another LRx 2.9. Why? I need more power at 4 Ohm mono than the 1.1k can give me. One of my fellow team members asked me why I didn't stick with Image dynamics. The only real reason I gave him was that I had the chance to drive a Ferrari 599 instead of a Challenger SRT 8. I chose the Ferrari. I'll leave you guys teased on the woofer for now. He he!

The first thing that popped into my head was THIS:

😁

1 attachment not included in this copy

sqcompBack at home · May 10, 2010#78
*
Alien MantisArizona · May 11, 2010#79
FOCAL Utopia is so unbelievably expensive.

For the price of one Utopia Be set... I could build an entire car audio system that would be so awesome, you could hear it in the next STATE.

FOCAL sucks. It sucks because it is overpriced boutique snob crap.



Just my opinion. I know some people think they gotta spend a million dollars to be happy. More power to ya.

DISCLAIMER:
I am not referring to competition systems
talnlnkyThread starterSpokane, Wa · May 11, 2010#80
Sqcomp know more than anybody else on here how much I disdain the idea of buying expensive subs... I once bought a 12" sub for $750 after tax... Saved over $100 on the purchase too. what a waste, sub was a quality built sub, but I later bought a sub for $370 that was better in both sq & spl... go figure... it probably wasn't as bullet proof tho as the spendy sub... and tho it was very impressive looking, it wasn't as shiney or cool looking at the spendy sub.

with that said, i'd pay $800 for a sub again some day... but it better meet or exceed one of the following...
1) 40+ mm one way linear movement & 15 - 18" in size
2) 32+ mm one way linear movement & 21-24" in size
3) 32+ mm one way yadda yadda & have an Fs of 12hz and play flat down to 10hz when installed in a 12-15cuft ported box.

basically, any of the three options would make for an amazing home theater sub... and someday, I plan on having a basement, and having dual 18" or 21" subs that fit one or two of the above criteria... if not all 3. Car audio tho.... ehhh... cars are a horrible environment for stereos, and spending soo much on a sub is silly, especially when considering the reason for such high price tags is usually for two reasons, 1) brand name 2) proprietary parts that usually aren't any better than what can be made using generic parts (but cost a hell of a lot more to produce).

I could show you a sub that would sound as good if not better than that focal for 1/4 the price. $500 or $2100... hmmm
sqcompBack at home · May 12, 2010#81
*
Alien MantisArizona · May 12, 2010#82
Originally Posted by talnlnky ↑
Sqcomp know more than anybody else on here how much I disdain the idea of buying expensive subs... I once bought a 12" sub for $750 after tax... Saved over $100 on the purchase too. what a waste, sub was a quality built sub, but I later bought a sub for $370 that was better in both sq & spl... go figure...

Yeah, that is exactly my point.

I can get a JL W7 for $360.
If there is no sub on the market that can beat the JL W7 for LESS than $360... then the JL wins everytime.

If you show me a sub that can MATCH the W7 for less than $360... then the JL W7 LOSES.

It's all about "performance value".

Lets say a FOCAL sub costs over $1,000, and is only SLIGHTLY better than the $360 JL W7.
Guess what? The FOCAL LOSES badly.

It's all about "performance value".

( Which is why it is still hard to beat an Alpine Type-R! )

Palmer812North Carolina · May 12, 2010#83
sq, here is where I put my fuse holder. There was a threaded stud sticking out from the firewall. I just drilled a hole in the base of the fuse holder and used a 10mm nut and lock washer. The wire is 16" long.
Picture not included in this copy

1 attachment not included in this copy

sqcompBack at home · May 12, 2010#84
*
Palmer812North Carolina · May 12, 2010#85
JL not my favorite either BUT it was free. 👍
DailyDriverutah · May 12, 2010#86
Is that something you can teach me palmer?
Palmer812North Carolina · May 12, 2010#87
Originally Posted by DailyDriver ↑
Is that something you can teach me palmer?
What? Getting stuff for free. I have been a manager of a stereo shop for 12 years. Just perks of the job. Last month I got a free Alpine INA-W900.
Picture not included in this copy

1 attachment not included in this copy

sqcompBack at home · May 12, 2010#88
*
goku87AK · May 12, 2010#89
why did you opt out of having a bit one?

I mean, you are going balls to the wall on everything else, and a complete digital signal from source to amp? $hiiiiiiiiiiiiiiiiiiiiit.
sqcompBack at home · May 12, 2010#90
*
Alien MantisArizona · May 13, 2010#91
I'm looking forward to seeing some speaker pods, amp rack, and sub+enclosure.

😁
Palmer812North Carolina · May 13, 2010#92
sq you might come home from that Kenwood training with a new toy. We had our Kenwood training a few weeks ago and they gave away $2500 worth of equipment afterwards 👍
sqcompBack at home · May 13, 2010#93
*
talnlnkyThread starterSpokane, Wa · May 13, 2010#94
Originally Posted by sqcomp ↑
Doooood! That would be more than sweet. I'd probably give it, whetever it is, to my brother in law. He's been working his butt off for no paycheck this year. It'd be nice to give him something cool.
Internship?
sqcompBack at home · May 13, 2010#95
*
Palmer812North Carolina · May 13, 2010#96
The guys you are going with are they Excelon dealers or just regular Kenwood?
talnlnkyThread starterSpokane, Wa · May 14, 2010#97
ok, so my program (bassbox pro) is all phuqered up visually... not sure how or why it happened. If I can't figure out how to fix it I will probably switch back to the Free WinISD program.. which isn't as good, but still decent.

Here's a graph for you. 1.5cuft box w/ 2000rms (takes a lil more than 2000 to get it to x-max... it appears the true SPL is around 88dB 1w/1m.

looks good in the sealed box, turns out the DCR really is 2.6ohm too. use your eq in the 25hz range to give a slight boost, and cut it up top where you blend it with the midbass and i'm sure it'll work great.

1 attachment not included in this copy

sqcompBack at home · May 14, 2010#98
*
Palmer812North Carolina · May 14, 2010#99
The KDC-X994 also has variable illumination and all Excelon has a 2 year warranty where the regular line is 1 year. The BT900 is sweet but no has no cd player. I'm not ready to give up cd just yet. DAMN! your dash looks good! That really turned out nice.👍
sqcompBack at home · May 14, 2010#100
*