Replies continued
Alien MantisArizona · Sep 1, 2010#301Yup, I had a feeling about that.
I do love 4-way systems, although I have heard plenty of 3-way systems that sound great too.
Derick, when are you gonna FINISH your system ???
😁
sqcompBack at home · Sep 2, 2010#302*
Alien MantisArizona · Sep 2, 2010#303The midrange goes all the way to 12.5k ???
Have you tried crossing it over at 8k and 10k ?
Seems like the system would sound cleaner overall if you don't make the midrange do part of the tweeters job!
And one thing I have noticed about ALL audio systems in general:
They all sound different at low volume, and high volume.
Some systems sound really nice at low volume, but you crank them up and they start falling apart.
I only heard a few systems in my life that actually sounded BETTER the harder you cranked them up.
Two were car systems, and the other was a home system that was in an acoustically treated listening room.
The subwoofer was the size of a dishwasher. It had an 18" driver in it, as I remember. His amps were a mix of top-line Denon and a pair of TUBE amps.
The mains were a pair of OLD classic Klipsch horns. ( they were quite large )
The room acoustics played a big part, but the system was also amazing.
A cool mix of "new meets old".
I kinda like car audio that is a mix of new technology and old-school design.
Alien MantisArizona · Sep 2, 2010#304Well, to be fair, my home audio system sounds better cranked up a bit.
My room acoustics are horrible, but the system is decent.
I have an Onkyo cd changer, two Harmon Kardon amps, four Cerwin Vega floor speakers, and a JBL 12" powered subwoofer.
I bought all that stuff over the years, piece by piece. On-sale, free shipping.
The Cerwin Vega's I bought locally, they were on clearance for $99 each.
I think I might have around $1,200 total invested.
I never had a car audio system that cost that much.
Probably never will.
The basic system I put in my Yaris was around $500 total.
😁
sqcompBack at home · Sep 2, 2010#305*
sickpuppy1Kansas · Sep 2, 2010#306owww, Klipsch horns.......heaven on earth when set up right, but very few people take the time or effort. I've heard Klipshhorns that would rattle the windows with crystal clear sound on a 20 watt tube amp. Amazing. I have Klipsch, but not the Heritage line, I'm sporting 10yr old reference, but I'm cool with that ;p
sqcompBack at home · Sep 2, 2010#307*
sickpuppy1Kansas · Sep 2, 2010#308Well my mains are the RF3 orignal series, which use a traxtic horn and two 8" ceramic coated driver. They were considered entry into the reference series but still sound fantastic. Bi-wired to the reciever. I have those and appropriate rears and center and dont remember which model sub. 12" with 350 watts I believe. rocks good with the Denon reciever. Have another set of the rf3's upstairs with a smaller denon to push them. Getting ready to move the theater upstairs where the flat panel and blue ray are. Gotta run wiring up through the walls and across the ceiling to the other side first for the surrounds. pain in the butt, but it makes movies sooo much more fun! Kinda like having great tunes in the car,huh!?
Back on subject.....
Alien MantisArizona · Sep 3, 2010#309 Originally Posted by
sqcomp ↑ AM,
I really wish you could see how big my smile is right now.
<snip>
Again, I SO wish I could have you hear the mids perform, you'd totally understand where and why I'm doing what I'm doing.
Got ya. You explained it perfectly.
I have no doubt those L4's are amazing.
So how much RMS power are you running to those L4's?
( and what is their official sensitivity rating? )
Just curious if they are efficient, or power-hungry.
sqcompBack at home · Sep 4, 2010#310*
sickpuppy1Kansas · Sep 4, 2010#311Hey SQcomp, do you know anything about Sound Ordinance amps they sell at Crutchfeild? I am gonna put my old Pioneer DEH-P6700MP in the Yaris for a while till I make up my mind on a newer HU.(And save up money)
I am not gonna go for the quality of build that you are,lol, not even close, but I have driven that little radio hard and I know the amp in it is getting tired. So I am gonna get a four channel amp for it on a budget. Then change speakers( on a budget too :-( and then a newer HU . The downside to doing this is, the 6700 only has 2 sets of rca out on back and one of them is called "non fading" with a (sub) next to it. So I'm wondering if I'll have to use the actual speaker out puts from the radios amp for amp inputs......Because on the radio, only the front speakers have an RCA out.
I'd probably be better waiting for a new HU 1st huh?LOL, I think I'm talking my self into a new direction here,lol
But regardless, do you have an opinion on Sound Ordinance amps for the budget minded ? Or something else would be better for a 4 channel under 200?
sqcompBack at home · Sep 4, 2010#312*
sickpuppy1Kansas · Sep 4, 2010#313Good point, I'll do that first. And FYI, I'm right outside of Kansas City. So I have a bunch of local shops. Some GOOD ones too. Guess I just assumed a better price on-line. which isnt always the case, but even so, the is alot to be said for supporting brick and mortar shop first as you stated.
Alien MantisArizona · Sep 4, 2010#314Crutchfield is expensive. They used to have good prices, but not anymore.
Sometimes they put stuff on clearance, and then you get a good deal.
Otherwise, expect to pay retail.
I started buying stuff from Sonicelectronix.com
WAY better prices, great selection, FAST shipping, and in most cases, FREE shipping. No TAX either.
And I had to send something back one time, because I didn't like it.
The guy on the phone was cool, no problems, got an RMA, and back it went.
New item arrived quickly, and I am totally happy.
I sent back a Clarion HU because it sucked, and exchanged it for a Pioneer HU which I LOVE.
I do my own installs, and I have lots of tools and a place to work, so I don't need some local "shop" to help me with anything.
I prefer to do my own work, that way I know some shop hack didn't cut corners on my install just so he could hurry up and go to lunch with his girlfriend or whatever.
People typically do NOT do as nice a job if it is not for "them", or they are not making the "big bucks" on it.
Installers are typically way underpaid for what they do. At least out here they are. Some people want to do a great job as a matter of personal pride. Maybe they want to establish a good reputation for themselves, so one day they can open their own shop. But most of the time, people are overworked, underpaid, and they just get burned-out after awhile. Then they stop caring, and start doing half-a$$ work just to pass the time.
SPEED is most important to shop installs. Gotta get that job done QUICK. Time is money. You can't spend 3 hours installing a deck. 30 minutes tops! Whip that harness together, slap that mounting kit in there, shove them wires back there, and get that bezel popped back on, the customer is waiting!
The only time I ever seen a shop take time on an install, is when a customer comes into the shop and says, "I want a killer system. I have $3,000 to spend."
The shop says, "Sweet! No problem! Leave your car with us for about 2 weeks, and when you come pick it up, you will be impressed!"
Customer says, "okay, here's the keys. Call me when you get it done."
Shop's LOVE that kind of customer.
They can put $1,500 worth of equipment in that car, pocket the rest, cook the invoice up to make it look BIG, and they can take their time with the job, doing lots of smaller jobs in-between working on the big one.
I hate to play the Devils Advocate, but I been around local shops too, and I really don't like the games they play. I have no need for that kinda crap.
I want GOOD gear, at a discount price, and I will do my own install so I know it is done RIGHT the first time. I will take my time on my own install. I will not rush anything. If I have a problem, I can research stuff on the internet, or call the place I bought the gear from. On-line discount stereo stores have people you can talk to if you have a problem. And the reputable ones will not give you a hassle about exchanging items. They have a reputation they need to keep-up too. If they leave people hanging high and dry, with no support after the sale, word will spread and they won't be in business very long.
SqComp has a good shop he deals with, and he has had great experiences with them. Nothing wrong with that. I have had just the opposite. I have had bad experiences with local shops, and GOOD experiences with on-line discount stores.
My only advice to anyone is: Check out your local shops, see what they have to offer, check prices, and then go online and see what the more reputable online places have to offer. Compare, and then decide what is best for YOUR needs. You might need to have help with your install. Maybe you need to get the best prices on stuff, because money is tight.
The point is, explore all your options. Don't trust the first place you go to. Do your research.
Nobody wants to get screwed, so it pays to do your homework so you can be prepared.
Bouncing things off people on the forums is a great source of info too!
That's why I hang out on these forums.
Lots of really smart folks on here. The more research you do, the better prepared you will be.
sqcompBack at home · Sep 4, 2010#315*
sickpuppy1Kansas · Sep 4, 2010#316I have the garage and all the tools, electric and air to do whatever needs to be done, I have no problem there........just no money,lol..... Whats that they say...Champagne taste and a beer budget!
Alien MantisArizona · Sep 5, 2010#317I should probably clarify that I do not have the big shop equipment to do custom box building and stuff like that.
I do not have a table-saw, a drill-press, or anything like that.
I have lots of hand tools, cordless drills, electric sander, a Dremel tool, electrical testers, etc.
( Pretty much all you would need to do a basic install. )
But if I was to try and do a special custom job like SqComp is doing, I would certainly want to have access to the bigger shop tools.
I have made subwoofer boxes in the past, but honestly, I can buy a new box cheaper than I can make one now.
( and I don't have to spend hours of my time fabbing it up )
The downside is of course: you get a generic box.
And there are times when you have to bite-the-bullet and make your own box, because you can't find a decent pre-fab that fits your application correctly.
It is nice to have access to a local pro stereo shop, no doubt about it!
For those of us who do not, we just do the best we can.
sqcompBack at home · Sep 6, 2010#318*
derickveliz2Central, MA · Sep 6, 2010#319 Originally Posted by
Alien Mantis ↑ Yup, I had a feeling about that.
I do love 4-way systems, although I have heard plenty of 3-way systems that sound great too.
Derick, when are you gonna FINISH your system ???
😁
Finish? finish what?😳 I'm going 50 mph slower that sqcomp, and looks like the
never ending story! I think my
problem is that I have every thing working but
not properly installed, Lows in the doors, sub in the trunk (a 10" bazooka tube temporarily installed) and yes I have my mids and tweeters on the dashboard and with towels I hold them and tested every
aiming position/direction available.
Pretty much I have everything where I like it, and
sounds AMAZING! 👍
But yes
I should keep working on the
real/final installation. If I could have 36 hour days... 🤷
D.
sqcompBack at home · Sep 7, 2010#320*
Alien MantisArizona · Sep 7, 2010#321 Originally Posted by
derickveliz2 ↑ I think my problem is that I have every thing working but not properly installed, Lows in the doors, sub in the trunk (a 10" bazooka tube temporarily installed) and yes I have my mids and tweeters on the dashboard and with towels I hold them and tested every aiming position/direction available.
Pretty much I have everything where I like it, and sounds AMAZING! 👍
But yes I should keep working on the real/final installation.
If I could have 36 hour days... 🤷
So you are trying to do a 4-way system?
What amps are you running for all this?
Ditch that Bachuka sub and get yourself a real one!
😁
Didn't you say you just lost your job ???
Now you got lotsa time to finish your install!
derickveliz2Central, MA · Sep 7, 2010#322 Originally Posted by
Alien Mantis ↑ So you are trying to do a 4-way system?
What amps are you running for all this?
Ditch that Bachuka sub and get yourself a real one!
😁
Didn't you say you just lost your job ???
Now you got lotsa time to finish your install!
Yes I'm running a 4 way system with a Pioneer HU
P-99 I have
3 Pioneer amps:
1. 300 watts x 1 for
sub 2. 65 watts x 4 for
mids and
highs 3. 75 watts x 2 for
lows The
Bachuka it's for my other car (corolla) I'm going to use 3 x 10"
Solo-Barics. But because my rear suspension was so
soft and my tires rubbing, I was using the
Bachuka, believe it or not it doesn't sound like a Bachuca! it sounds pretty good, it must be the P-99's magic!
Yes I
did get layoff a couple weeks ago, and I though I was going to have
more time, but it's the other way. Besides my family it's very
happy to have me at home more than just weekends. I'm working part time with a friend of mine (a civil engineer)
learning new stuff and drawing
plans, but he lives
62 miles away from home! Long commute. Lots of time to hear
music! D.
FcukThisseattle · Sep 7, 2010#323Can't wait to see the update pics sqcomp!!
----
Towards the OT discussion on buying equipment.
I've always found online prices to be significantly cheaper than local dealers, period.
All the local shops i've been to.. treat me like crap. I get the usual "What.. In a yaris?"
People never take me seriously either, because i'm 18. I gave up on it.
I got all of my gear at discount.. In fact i bought the majority off eBay when the 30% cashback event was taking place. Other deals were simply found through forums.. You'll be amazed at how crazy some of these bargains are. Here's a rough idea of what i paid in the end.
• re audio 6.5 xxx component -- 150
• eclipse mk2 cd7200 -- 280
• dls a3 -- 200
• jl 300/2 black-- 150
Subwoofer selection has swapped around drastically for me.
• Pair of 8w7's... bought for 300, sold for 420. (Used ebay cashback, sold it locally)
• Pair of Diyma R12's...Bought for 150. Sold one.
• Stereo integrity v4... won it from diyma-review giveaways.. (50$ shipping)
I haven't had a single problem with the quality of my gear, thus far. Everything was purchased brand new and has worked flawlessly.. The only downside was the time spent searching for bargains. Took me about 2 months.. If you want manufacturer support however, you'll be out of luck.
My advice... Just check the classified sections found at audio forums daily.
As for shop tools...You really don't need them.
The essentials : Jigsaw, router, drill, and space-
sqcompBack at home · Sep 7, 2010#324*
FcukThisseattle · Sep 8, 2010#325What are b-stock legatias ?? And how much would they cost ?
I really wish i put more time into researching my midrange woofers before i hopped out and bought my re audio xxx set. They're not so much sq oriented in comparison to others, but i guess that's fine--since it's still the clearest set of woofers i've owned. It's ok, The bass output is wicked. There's such a vast selection... For my next install i'll probably grab some hybrid audio-
sqcompBack at home · Sep 8, 2010#326*
sqcompBack at home · Sep 13, 2010#327*
bzinn 1University Place,WA · Sep 22, 2010#328Hurry up and get this thing finished man.......I wanna hear it.....will even drive south......lol......starting mine looks like November.......got all the materials now short of new tweets,proper resin,and a few odds and ends for the power wire like loom and such....the little stuf.......
Looken great man......be proud of your install it is incredable.
Brian
sqcompBack at home · Sep 23, 2010#329*
sqcompBack at home · Oct 1, 2010#330*
Alien MantisArizona · Oct 1, 2010#331 Originally Posted by
sqcomp ↑ ...AND...To fall into the Nostrodamus-like predictions of AM, I'm changing my mind and messing around with my sub. You will probably note a vented IDMAX 12" soon...
😁
I was beginning to think this thread had died on us. Good to see it is still hanging in there. ( since SqComp's system is NOT "officially" finished! )
( will it ever be? ) Probably not.
Nothing wrong with that, a hobby is a hobby. A career is a career.
It's all good.
NOW... let me say: COOL to see you trying a vented IDMAX 12!
👍
Let us know how that turns out. I'll bet you will like it.
You gonna tune that enclosure for a tight specific freq range?
You trying to get some more ultra-low bass out of your setup?
( life below 40hz, right? )
🙌
sqcompBack at home · Oct 2, 2010#332*
talnlnkyThread starterSpokane, Wa · Oct 2, 2010#333 Originally Posted by
sqcomp ↑ Yeah...i'm talking with the ID guys about specifics of the enclosure. I'm going to make a test enclosure that will duplicate conditions for a larger sealed enclosure as well as the ability to make a medium or large vented enclosure. I'm looking at being able to have the ability to switch between a larger sealed enclosure as well as a mediums sided vented enclosure at the same time. I know it can be done.
AM-yes, I am absolutely looking for performance starting at and going strong below 50 Hz. My mid bass speakers are overlapped at 40 Hz and the sub ends at 50 Hz. I have plenty of crossover ability to cease signal if I need.
Will it ever end not this year. This topic may turn out to be more of a blog onto the life of the system...
At the end of the month, I'll be replacing the tester L4SE speakers with the final push terminal types. The L8 speakers will be replaced at the end of the year with some L8SE copper phase plug types.
THEN I should be done. After that it will all be competition news. There's lots going on in team hybrids. Like I mentioned in the NW section, IASCA is going to be teaming with HAT to make a show series happen across the country. I know there will be a competition down by you too AM. SQ/SPL events...
It's a great opportunity for us Yaris owners to show our systems and get some professional input on it.
Hey... just got net again John... you'll see my face around here again in the future... haven't read through the past months worth of post yet... but will do soon.
hope all is going well.
sqcompBack at home · Oct 2, 2010#334*
derickveliz2Central, MA · Oct 3, 2010#335 Originally Posted by
sqcomp ↑ I MAY think about selling the LRx 4.5 and buying two more LRx 2.9 amps...OR...Selling them all and trying my hand at four Mosconi AS300.2 amps. We'll see what happens in the way of money and price breaks after this year. The reason is NOT because they don't perform. They do that pretty much perfectly. It's just this idea of vertical bi-amping that I'm chasing...
Some times I just wonder how much more I could learn, I feel so naive when reading about these LRx, Mosconi and bi-amping 🤷 Great stuff in this thread, and I like the idea of a Blog of a life time!
keep it up! and try to suck up all the information with the big guys at HAT and share it with us over here! 👍
D.
sqcompBack at home · Oct 3, 2010#336*
sqcompBack at home · Oct 18, 2010#337*
derickveliz2Central, MA · Oct 19, 2010#338Cool, I want a light strobe flasher too!
sqcompBack at home · Oct 19, 2010#339*
Alien MantisArizona · Oct 20, 2010#340 Originally Posted by
sqcomp ↑ I'm also going to be installing load resistors across all the turn signals IF when I replace the front two turns, it hyper flashes.
You can run a solid-state flasher unit.
The mechanical flasher units will vary their flash-rate depending on the load.
NAPA sells both kinds.
talnlnkyThread starterSpokane, Wa · Oct 22, 2010#341solid state I think would be the way to go... probably more reliable.
sqcompBack at home · Oct 22, 2010#342*
sqcompBack at home · Oct 27, 2010#343*
derickveliz2Central, MA · Oct 27, 2010#344 Originally Posted by
sqcomp ↑
So, I opened up the back ends and am "free air"ing the mid bass into the crumple zones. Yeah...the mid bass is BIG up front! Man those L8's move! I changed the time alignment on the sub and now it's all up front in a big way.
I believe you! even with my underpowered system I've been playing with
Time Alignment on the Bachuka, and the results are
amazing feels like
magic.
I can imagine
the feeling of the L8's must be a "Religious Experience" Like the song "Experiencia Religiosa" from Enrique Iglesias, try it it's a good song!
Why "Free Air"? did you test one side first? just curious, BTW your kick panels look so massive, I guess they need to be like that. Your friend Jim is going to send me a couple of MDF rings for my
6.5" midbass drivers so I can build
kick panels.
D. 👍
packetraceQuebec · Oct 27, 2010#345You've got a very nice talent !!!! I'm really impress by your work!!1 Congrats (Y)
sqcompBack at home · Oct 28, 2010#346*
derickveliz2Central, MA · Oct 28, 2010#347 Originally Posted by
sqcomp ↑ Derick,The drivers themselves really dictate what enclosure they want to be in. I tried the closed back/sealed kick pod route. It just choked these drivers. The moment I decided to open the pod up and essentially make it a plate versus a pod...well, it was night and day.
Got it! 👍
That is why I choose a pair of 6.5" midbass drivers specifically to work in a small sealed enclosure of 0.25 cu.feet. 😉
So if I ever upgrade to HAT L6's I'm going to have to do the same like you did to the L8s have them free air. 👍
Thanks
D.
sqcompBack at home · Oct 28, 2010#348*
derickveliz2Central, MA · Oct 28, 2010#349 Originally Posted by
sqcomp ↑ The nice thing is you can do smaller kicks than I did OR you can fit them into the doors.
Smaller for sure! but NO NO!!! Not the doors! 😳
D.
packetraceQuebec · Oct 28, 2010#350Where would you mount youre 6.5 ? make a kick panel like SQcomp did where our feet goes on the passenger side?