Yarisworld Archive

SQcomps install

403 posts · 83,895 views · page 8 of 9

Replies continued

derickveliz2Central, MA · Oct 28, 2010#351
Originally Posted by packetrace ↑
Where would you mount youre 6.5 ? make a kick panel like SQcomp did where our feet goes on the passenger side?
Yes I'm going to build kick panels, it's in my thread ... POST # 609




Picture not included in this copy

D.
packetraceQuebec · Oct 28, 2010#352
niceee !!! waiting for Work in progress picture!!!!!
sqcompBack at home · Oct 28, 2010#353
*
derickveliz2Central, MA · Oct 29, 2010#354
Originally Posted by sqcomp ↑
With yours Derick, I might look at anchoring THROUGH the stock kick. As a matter of fact, why don't you take off both kick panels and take a pic more directly of what's under there. You should find to molex stations...

Yes, my first option would be to use the kicks. The hard thing is the clutch pedal. If I can do an 8.5" mid bass...you can do a 6.5" mid bass.

Also, holler at me when you get the amp and sub.
Yes I'm going to attach mechanically the kicks to the frame using the threaded pin fixed to the chassis, also will drill through the wheel well and hold it mechanically too.

Yes I will contact you once I get the amp and the sub thanks.

D.
sqcompBack at home · Oct 30, 2010#355
*
derickveliz2Central, MA · Oct 31, 2010#356
Originally Posted by sqcomp ↑
Wait...

Why do you need to drill through the wheel well? That threaded bolt will hold just fine without any other additions. It's holding my loaded kicks like a vice.
I wanted 3 points to hold on, but I guess I can live with 2!
If it's enough for the L8's my 6.5 will be a piece of cake.

Thanks
Derick
packetraceQuebec · Nov 8, 2010#357
With you two batterie upgrade....have you changed your alternator ? or keep it stock ?
sqcompBack at home · Nov 8, 2010#358
*
packetraceQuebec · Nov 8, 2010#359
two batterie can be powered by stock alty ? :O
sqcompBack at home · Nov 9, 2010#360
*
derickveliz2Central, MA · Nov 11, 2010#361
Originally Posted by sqcomp ↑
Picture not included in this copy

Picture not included in this copy

So, I opened up the back ends and am "free air"ing the mid bass into the crumple zones. Yeah...the mid bass is BIG up front! Man those L8's move!
So let me see if I get it... (regarding the install for HAT L6s in kick panels)

You make a small kick panel big enough to fit the L6, but you leave the back open (or cut the back off) then vent into the crumple zones. Now the kick panel still attaches mechanically to the floor, but... Do you have to seal all the edges to the bear metal floor? This concept of "free air" it's a little hard for me to understand.

Thanks

D.
sqcompBack at home · Nov 11, 2010#362
*
derickveliz2Central, MA · Nov 11, 2010#363
Originally Posted by sqcomp ↑
Okay...it IS as simple as you're saying. All one needs to do is to separate the front wave from the back. The "venting" is not really venting per se. It's just using a more open airspace than a sealed or ported enclosure can offer. It's really more on the cusp of infinite baffle or free air.

I can tell you though that this type of panel/enclosure does indeed work for my L8. The bass response gained was very noticable...and nice!

I'd offer to make them for you...perhaps we can work something through the shop for the baffles and you can glass them in to a kick. You know I can do it as well since we essentially have the same vehicle.
Thanks

The free air concept is interesting, but first I need to get my hands on a pair of L6s used, because I probably won't spend the $$ in new ones)

or I'll go for other 6.5 driver that requires a very small enclosure

D.
derickveliz2Central, MA · Nov 11, 2010#364
Originally Posted by derickveliz2 ↑
I need to get my hands on a pair of L6s used, because I probably won't spend the $$ in new ones)
or I'll go for other 6.5 driver that requires a very small enclosure
D.
Man I was so close to hit the "send money" to HAT for a pair of L6s when I decided to go to my car and check the floor over the front wheel wells 😳😳😳 all that area is sealed and treated like hell with MAT, CLD Tiles, Foam and MLV... 🤷 should I take all that out? 🤷 many hours deadening that area, I know I'm drooling for the L6s but is it worth the effort now? 🤷

D.
sqcompBack at home · Nov 11, 2010#365
*
derickveliz2Central, MA · Nov 12, 2010#366
Originally Posted by sqcomp ↑
Give me a pic to look at...

...also, you know where the holes are, all you have to do is to cut them out. It's easy.
3 layers of Mat at the wheel wells... hard to tell where the holes are, but I'll look into installation photos.

I'm twisting my arm all the way 😲 it's hard to say no to a pair of L6s 🤷 sounds to me like another challenge? 😎😎😎

lets see what happens tomorrow, I may not be very lucky since there where only 4 left (L6s)

D.
sqcompBack at home · Nov 12, 2010#367
*
derickveliz2Central, MA · Nov 13, 2010#368
.
Got a tracking number from a guy called Scott Buwalda! jeje


D.😁😁😁😁😁:bi ggrin:
sqcompBack at home · Nov 13, 2010#369
*
talnlnkyThread starterSpokane, Wa · Nov 20, 2010#370
Looking good, can't wait till spring, hopefully the next time we meet you'll have it 100% done.... Don't forget, i'll be in salem in march/april for 5 weeks(during the week only).
sqcompBack at home · Nov 20, 2010#371
*
sqcompBack at home · Nov 21, 2010#372
*
JBougieBeech Bluff, TN · Nov 21, 2010#373
I just read through your install thread, and I have to say that it is all so foreign to me. lol

Ohh this will be a lot to learn :)
sqcompBack at home · Nov 21, 2010#374
*
Palmer812North Carolina · Nov 21, 2010#375
Never used that for sound deadening. What we refer to as a milkshake is bondo and resin mixed together.
sqcompBack at home · Nov 21, 2010#376
*
Alien MantisArizona · Nov 21, 2010#377
Originally Posted by sqcomp ↑
Thoughts?

The "Nits" are being "picked" to death.

😁


It never ends... until you stop it.

There should be a 12-step program for this kinda stuff.
sqcompBack at home · Nov 21, 2010#378
*
derickveliz2Central, MA · Nov 22, 2010#379
Originally Posted by sqcomp ↑
Here's a trivia question. I know some will know it, I want those who do know to bing their answers to the front of the class though.
What is a milkshake in reference to sound deadedning?
How in your opinion, how should it be applied to A-pillars and mid bass kick pods?
My answer is lead shot, sand, and resin (for materials).
What do some of you have in mind?
Interesting... 👏

D.
derickveliz2Central, MA · Nov 22, 2010#380
Originally Posted by sqcomp ↑
I'll have to deaden the kick pods as well as the A-pillars a lot more than they are now.

How in your opinion, how should it be applied to A-pillars and mid bass kick pods?

My answer is lead shot, sand, and resin (for materials).

What do some of you have in mind?
Well at least my self this is what I'm going to do (even though my drivers and amps are smaller than yours)...

I'm going to start with Clay, inside the spheres and kick panels. For the A-pillars I'll use CLD Tiles with some Mat. Since my spheres are mechanically attach to the a pillars I'll isolate them with some Extruded Butyl Rope to prevent vibrations and try to reinforce the way the A-pillars attach mechanically to the chassis; because the speakers and deadening add a lot of weight to them.

The Clay idea I'm not sure if it works or not, I read it online and makes sense but you guys are the PROS here, I just feel like the Clay can be removed if doesn't work, some other epoxy/glue/resin combination may be the best way to go, some times trial an error is my best friend.

I think it can't be very rigid or stiff it should dampen the vibrations, be heavy and a little flexible to tolerate changes in temperature.

Well, that's what I think, if there is a better way to approach it, let me know I don't want to re-invent (H2O)

D. 🙂
sqcompBack at home · Nov 22, 2010#381
*
derickveliz2Central, MA · Nov 22, 2010#382
Originally Posted by sqcomp ↑
What clay are you looking at using?
I have no idea 🤷 I got some at a paper store, but wanted to check what hardware stores carrie 😕

Is there any special clay that I should use or not to?

D.
sqcompBack at home · Nov 23, 2010#383
*
derickveliz2Central, MA · Nov 23, 2010#384
Originally Posted by sqcomp ↑
You've got advantages and disadvantages to using "clay". Modeling clay will kill vibrations but will not hold up to heat.
So it would work great inside the kick panels and not too good on the spheres/a-pillars

mmm 😎
sqcompBack at home · Nov 24, 2010#385
*
derickveliz2Central, MA · Nov 25, 2010#386
Originally Posted by sqcomp ↑
probably correct.

...So you received your amp and sub? I'm seeing the pieces in your signature...
They should arrive Wednesday next week!

-me happy- 👍


.
sqcompBack at home · Nov 25, 2010#387
*
derickveliz2Central, MA · Nov 25, 2010#388
[B]
Originally Posted by sqcomp ↑
Good good!

Now, I'd like to see those L6's installed more than anything. You realize that the equipment list you have now is vastly better and much different than what you started with? I'm particularly enjoying the contrast.

What step is next for you?
I'll start building the kick panels for the L6's once I get the MDF rings, they should be here next week.

Do I realized it??????????????? 🤷

I was only going to add a small amp and a 10" subwoofer and keeping everything else OEM.

This is a product of the internet and spending way too much time behind the screen.

I don't drink or smoke or do drugs, but I do have an addiction and I'm glad it's all about YarisWorld!

My next step:... .😕😕????????? I'm already thinking about another class A/B amp to power the L6's properly maybe 150watts x 2 (instead of 60watts x2)
.
😉
sqcompBack at home · Nov 26, 2010#389
*
sqcompBack at home · Dec 2, 2010#390
*
derickveliz2Central, MA · Dec 3, 2010#391
How different it feels now when you close the last door open, windows up? is it harder?
I've been thinking about this for months now, I don't have the SPL you have but still, I did a second chamber on top to block outside road noise, but still will be a leak (bass)

Derick.
sqcompBack at home · Dec 3, 2010#392
*
derickveliz2Central, MA · Dec 3, 2010#393
Originally Posted by sqcomp ↑
D,

You're probably within 3 dB of my output. How much power do you have?
The back deck used to have a "buzzing" when the bass would hit...

Right now I'm working on fitting some interior treatments for the windows while I'm in the lanes. According to the IASCA rules that I've gone through so far (I have the rulebook printed out, highlighter used), I cannot cover the front windshield. He he...It says NOTHING about the other widows...
Right now I'm running like 200 watts from the very old pioneer amp to the 10" Bachuka, will be 250 watts to the IDQ12.

That's why I made a second chamber, on the outside you can hear the Buzzing but not in the inside, and still benefit from the pressure valve, we'll see what happens with the IDQ12

Interior window treatment? looking forward to see this!

Derick

.
sqcompBack at home · Dec 3, 2010#394
*
sqcompBack at home · Dec 11, 2010#395
*
Alien MantisArizona · Dec 12, 2010#396
Gz!

Now we wanna see some pics of that ride at some competitions!

If you get a trophy, pics of YOU holding the trophy in front of your Yaris are MANDATORY.

Good luck!

👍
sqcompBack at home · Dec 12, 2010#397
Moderator...This isn't my post so I cannot remove it. I'm not giving anymore looks at my system or insights on car audio simply because they're apparently not welcome or appreciated and are too elitist apparently.
_S7V7N_South Texas · Dec 13, 2010#398
Like Palmer said on a diff post ...Wtf happend, Sq had alot of good pics and topics on his install thread, and alot of knowledge .
talnlnkyThread starterSpokane, Wa · Dec 29, 2010#399
Originally Posted by sqcomp ↑
Moderator...This isn't my post so I cannot remove it. I'm not giving anymore looks at my system or insights on car audio simply because they're apparently not welcome or appreciated and are too elitist apparently.
sad day.... cause i still need your help and opinions...

as for the milkshake.... i never really did any milkshake stuff... but the company that makes spectrum... who is that... crap I forget... they make a sludge that i hear is like thick peanut butter.
derickveliz2Central, MA · Dec 29, 2010#400
You can PM sqcomp, he is around.

D.