talnlnkyOriginal postSpokane, Wa · Mar 6, 2010#1hey, here's the thread I told you I'd start...
keep in mind...
these are single 12's on this graph, 750rms
once you put these boxes in a car, you'll have cabin gain in the sub 40hz range... especially in the sub 30hz range.
the group delay matters most above 30hz, once you get below 30hz, it really don't matter
the ported box would have a big long port (see it)... but that would be needed in order to ensure there would be no port noise at high volumes (which would kill your score in the lanes).
1 attachment not included in this copy
Replies 402
Alien MantisArizona · Mar 6, 2010#2Strange graph readings.
I would expect to see an amplitude peak around 3 db's higher on that ported box line, around the 40-50hz region.
Every single graph I have ever seen, shows a FLAT curve for a sealed box, with a drop-off starting around 50hz, and a slightly higher peak in db just above the tuning frequency for a ported enclosure.
And why would anyone ever want to run a GIANT over-sized SEALED box ???
Why not save space and just do a ported box?
sqcompBack at home · Mar 6, 2010#3No more advice
talnlnkyThread starterSpokane, Wa · Mar 6, 2010#4 Originally Posted by
Alien Mantis ↑ Strange graph readings.
I would expect to see an amplitude peak around 3 db's higher on that ported box line, around the 40-50hz region.
Every single graph I have ever seen, shows a FLAT curve for a sealed box, with a drop-off starting around 50hz, and a slightly higher peak in db just above the tuning frequency for a ported enclosure.
And why would anyone ever want to run a GIANT over-sized SEALED box ???
Why not save space and just do a ported box?
and Infinite Baffle install is pretty much a giant sealed box. To mimic an IB install using a sealed box you only have to have a box 4 times greater than the vas of the sub.
that isn't an amplitude chart per say, it doesn't show how loud it'll be, only how quickly it'll roll off.
the reason why it doesn't look like the ported box is a lot louder is because it is a small size ported box considering how low it is tuned... That is an extremely low tuning for a car.
I'm trying to convince sqcomp to do something a bit more radical, yet easy on his install... I'd like to see dual 15's IB in his trunk.
Alien MantisArizona · Mar 7, 2010#5 Originally Posted by
sqcomp ↑ AM -- Save space on that vented enclosure? That single enclosure is almost 3 cubes.
Design #3 is a 5 cf sealed box.
That is what I was referring to.
_S7V7N_South Texas · Mar 7, 2010#6Sq you have a Sedan ? .....If so did you remove the 6x9's to get more sound out from the trunk....I have the base model....so my rear seats won't fold down....i'm flirting with the idea of seeing if there's a way to fit the fold down seats in there, with maybe changing a few bolts .
talnlnkyThread starterSpokane, Wa · Mar 7, 2010#7Sqcomp, if you start using membranes.... you will lose your 20-40hz octave... at least a good amount of it.
talnlnkyThread starterSpokane, Wa · Mar 7, 2010#8 Originally Posted by sqcomp ↑
...which I won't...
The only reason I'd use those is if space was the first requirement. I think I can spare 2 cubes sealed for a very stable response. I'm going to be interested to hear what the sound is like with all the deadening treatment, the enclosure build, and the signal quality.
Right now I've got a discussion going on on another board having to do with aiming and speaker placement. It's got some pretty good contributors...all of them have been to USACi, IASCA, and MECA finals; some of them are actually world champions...
I feel that if I don't get on this system as soon as I get home it'll never be right. I'm just anxious to do this!
yeah.... focus on the mids & highs.... subs really aren't that hard to get sounding good.... sealed box, and enough cone area and you are good.
With a ported box, you have to have a awesome box design, or a 1/3 octave eq.
_S7V7N_South Texas · Mar 7, 2010#9My bad for hijacking.....i'll delete my post, it was kinda rude.
_S7V7N_South Texas · Mar 8, 2010#10What material is that Ensolite made out of ?
talnlnkyThread starterSpokane, Wa · Mar 8, 2010#11 Originally Posted by sqcomp ↑
ensolite is a lightweight closed cell foam. You can buy it at
http://www.raamaudio.com. It is very moldable, moreso than dynaliner. That being said, that 1/2" Dynaliner I'm using on my rear doors is THE $hit. I really have enjoyed both products.
i used ensolite on my yaris... i dunno how much it helped.... easy to use for sure... wish it was twice as thick. I understand how the foams work, but I really wonder which ones actually are worth a darn. Next time I buy a car, I'm just buying 5 gallons of the liquid junk (spectrum) and throwing it all over the floorboards... get it like 1/2" thick, then do the underside of the car with it too.... if that doesn't get rid off all the road noise, I don't know what will... We did that to a friends SUV... and it did wonders... I should've done the same.
Alien MantisArizona · Mar 8, 2010#12As much as we all love our Yarii,
The Yarii's biggest problem is the fact that it is a unibody car.
It doesn't have a seperate FRAME under it.
All the suspension components attach directly to the body shell.
So, naturally it transmits more road noise.
It is after all..... an ECONOMY CAR.
I do wish that Toyota would have spent a little more effort on sound-dampening.
When you strip the panels off the car, you see how little they did.
I mentioned this when I filled out my "Toyota satisfaction survey".
But after all.... the Yaris is an ECONOMY CAR.
🤷
bzinn 1University Place,WA · Mar 9, 2010#13Wow I am glad I opened this thread,I just picked up a IDQ 12" for $50 from a buddy and it looks like it will work well in the small car,keep us posted on the boxs you chose,I need some ideas on what will work still.
sqcompBack at home · Mar 9, 2010#14*
_S7V7N_South Texas · Mar 9, 2010#15Dude that spare tire needs to be relocated..Lolll i see lots of potential under there for a nice lil amp rack setup. Imma see if that sucker can be moved to under the car, kinda like how trucks are.
Yo do you think a set of 3.5's with a Mounting depth of 1.5 will fit in them c-pillars ?
Picture not included in this copy
_S7V7N_South Texas · Mar 9, 2010#16derickveliz2Central, MA · Mar 10, 2010#17 Originally Posted by sqcomp ↑
See? It's setup for a sound deadening exercise!
Sqcomp is right! I agree %110 I just started this process and every hour I spend it's worth it.
I started to notice the benefits in the early stages, watch video:
YARIS DEADENING VIDEO I'm only installing a small 10' sub-woofer not a big deal or professional install like you guys, so I'm really looking forward to see how your set ups come alive.
👍
.
_S7V7N_South Texas · Mar 10, 2010#18I'm Def no pro, my respect goes to Sq and Taln I'm just learning, Loll as you can see on some of my questions, but it's great to Get opinions from others, I sure am glad there's a group of us now working on Sedans, before the majority of the Posts were on Hatches, The sedans are comming alive !!!
Good luck to You guys on your installs, I'm dying to see what type of creations can come from all this.
swiddCentral Alabama, GOD BLESS AMERICA · Mar 10, 2010#19Wow, I just put lots of deadening and used a closed cell foam mattress to stuff into the open spaces in the rear hatchback wheel well area, and the difference in road noise is considerable already! Its like the noise picture shifted to dead silence from the back of the car, and noise coming only from the front, engine and doors.
This was easier than I feared! Just rip those panels off, clean up the dust, rip out the old speaker, lay down mat, fill up with foam, slap the panel back on, wipe off the fingerprints and test drive. Like 40 minutes per side.
I am so kicking myself for not doing this sooner! I've been so annoyed with the noise in the Yaris.
talnlnkyThread starterSpokane, Wa · Mar 10, 2010#20 Originally Posted by sqcomp ↑
One of the installs I was involved with included an IDQ 10" woofer. We had it plugged into a quality amplifier to say the least. It was receiving as much as 600 very clean Watts. That little 10" would lift the back deck carpeting on demand and not even think twice about it.
There is absolutely NOTHING wrong with using 10"s.
except going with twice as many 8's looks cooler! 😁 Nothing like seeing an install of 8 or more 8's wangin in the back... seeing lots of cones moving at the same time is a cool visual.
Alien MantisArizona · Mar 10, 2010#21 Originally Posted by sqcomp ↑
One of the installs I was involved with included an IDQ 10" woofer. We had it plugged into a quality amplifier to say the least. It was receiving as much as 600 very clean Watts. That little 10" would lift the back deck carpeting on demand and not even think twice about it.
There is absolutely NOTHING wrong with using 10"s.
I can testify on this one.
I put one Alpine Type R 10" sub in a ported box in the hatch of my 3dr Yaris, and it ROCKS.
It's getting 400watts RMS.
I have always been a fan of 10" subs in cars.
talnlnkyThread starterSpokane, Wa · Mar 11, 2010#22 Originally Posted by sqcomp ↑
Yeah...I toyed with the idea of doing eight ID 8's in the back of the sedan...
I then thought about my KISS principle and just went with two IDQ 12's.
that is simple... it's a lot of simple. omi-directional... unless you got a lot of distortion coming from them that's not an issue. I'd think the KISS principle would matter most with signal processing, crossovers, and everything above 100hz.
talnlnkyThread starterSpokane, Wa · Mar 11, 2010#23 Originally Posted by sqcomp ↑
...and then I thought about a single IDMAX 12 off that 1200.1...
I need to STOP thinking though. It is seriously hampering my direction. As much as I like the IDMAX, I still don't think it would have the output of two IDQ 12 woofers. I also don't sincerely think I would hear a difference in that frequency range.
Taln,
You're right on the KISS principle statement. I've chosen to worry about the simple part of the install and deal with the top end as I get there. The days are coutning down.
Oh, after SBN in Daytona this weekend, I should have some good pictures of a vehicle that doesn't officially exist for another 18 hours yet. If you like sound, stick around, I should have something for you...
you know.. there is always that 21" maelstrom.... or this
DPL 15" which has a Fs of 19hz, a linear motor with 22mm one-way x-max... and would work great in an IB install.
talnlnkyThread starterSpokane, Wa · Mar 11, 2010#24 Originally Posted by sqcomp ↑
okay butthead! I just had a thought flash through my mind...
There's NO NEED FOR THINKING! I hate thinking! I'm in the military, there's NO requisite to think here! LOL!
dude... i've talked to you on the phone like once... but man... we should really meet up some time when you get back. Don't you owe me a trip out to eugene anyways, I swear you were supposed to watch a buddy's fight, but then didn't come last minute for some lame reason.
derickveliz2Central, MA · Mar 12, 2010#25 Originally Posted by sqcomp ↑
I know there are several shows up in Cananda I'l be making. I'll also be doing the Portland Auto Show this next year (if Jim plunks down money for the space like he wants to), as well as the Rod and Custom Show. Oh! There's also the Sherwood Cruise In and Auto Show too.
How do you find out about all these shows? any shows around Massachusetts area? I would like to go.
Thanks
D.
_S7V7N_South Texas · Mar 12, 2010#26The USACI and IASCA sites have quite a few shows posted. Plus you go to one show and people see that you're an alright dude, You'll deff here about more local shows.
talnlnkyThread starterSpokane, Wa · Mar 12, 2010#27 Originally Posted by sqcomp ↑
Something like that. It's been over a year, maybe two now.
I've gotta get this project on it's feet and standing up within 30 days of me being back. How about this, I'll satiate you by sending you the build pics first. Are you down for a trip up to BC here this year? I know there are several shows up in Cananda I'l be making. I'll also be doing the Portland Auto Show this next year (if Jim plunks down money for the space like he wants to), as well as the Rod and Custom Show. Oh! There's also the Sherwood Cruise In and Auto Show too.
If I make it up to canada this year... it'll be on my honeymoon. I'm in the process of trying to be hired as a Probation Officer.... I've made it past the interview stage, but there's still background check/psych eval, and then I have to be one of the few picked from a group of 9... If I get that job I may be able to put the cash together... but really... i've got too many expenses going right now.. I've been supporting myself, and partially supporting the fiancee off my meager salary since august... and debt has been slowly accumulating as a result. Portland show is possible for sure.
derickveliz2Central, MA · Mar 12, 2010#28Not much only:
05/23/10 12:00 1 IMPORT FACE OFF EPPING NH
All ready in my calendar.
Alien MantisArizona · Mar 12, 2010#29 Originally Posted by
talnlnky ↑ I'm in the process of trying to be hired as a Probation Officer.... I've made it past the interview stage, but there's still background check/psych eval
Psych eval?
You might as well forget it then!
talnlnkyThread starterSpokane, Wa · Mar 12, 2010#30 Originally Posted by
derickveliz2 ↑ Not much only:
05/23/10 12:00 1 IMPORT FACE OFF EPPING NH
All ready in my calendar.
it's barely march... most shows for autosound happen in the summer... come april/may you should start to see stuff popping up... I remember the virginia area being pretty big when it came to shows... A few years back I wanted to Join IASCA, but they didn't have a single show in WA, so I didn't... joined dB Drags instead.... then found out there was only like 3 sanctioned shows that year in the state.... So I lost faith in the whole thing... THEN I MET the guy who runs/owns dB Drags.... the tool lived literally 15 minutes away from me. I think he purposely felt the need for there to be no autosound comp scene where he lived... otherwise his work would always be around him.... Ok maybe not... but really... its like if God live not in heaven, but rather in hell.... doesn't make sense... make some improvements dangit!
_S7V7N_South Texas · Mar 12, 2010#31Texas is the place to be for IASCA and USACI, they damn near have a show every other weekend. Here in Florida there's quite a few shows, but they're more towards ricers, the big one that comes here to Orlando is Hot Import Nights. That is one Hot show, No lie.
_S7V7N_South Texas · Mar 13, 2010#32My work schedule screws me up, I'm off Weds and Thurs and work Evenings Friday through Tuesday. Soon as my cars in line though i'm going to tell them i need at least one sunday outta the month off, and get some shows in line.
talnlnkyThread starterSpokane, Wa · Mar 15, 2010#33 Originally Posted by sqcomp ↑
An update...
Jim and Justin are "talking dirty" to me about puting the L4 up on/in the dash. They've had a few months of the Yaris just sitting in the back of the shop. They put the alarm in it and tinted the thing, so they had time to look at the dash.
...If I can get the L4 and the L1 Pro SE up there in the same vicinity...
Oh, that will free up the kick area to take the L8 right in the corners of the footwells. Since we havce the sytrofoam "filler" down there, I can use that space to glass in the mid bass.
It has been said, once you go to the floor, you'll never use the door!
Oh man! 30 days until I see my car to finish it.
Audio heaven will ensue.
In my mazda I had my koda 8's (4" mounting depth) in glass pods in my kicks... it was AWESOME for midbass... very tight... and very strong. they had something like .15 -.2cuft sealed. The mazda was an auto.... the yaris is not.... I think i'd have trouble glassing them in the kicks if I tried... I do wear a size 12... plus, that's where I plan on putting my 4's... but if you can do it.. thats awesome.
_S7V7N_South Texas · Apr 19, 2010#34Cool deal bro...Welcome back to the states !
The ArchitectFL · Apr 20, 2010#35pics of crimper bc i dont believe it.
goku87AK · Apr 21, 2010#36Beer is pretty much the universal currency lol. Can't wait to see the final product!!!
Not gonna lie, I use a combination of hammer/pliers to crimp. It's just so much easier lol.
talnlnkyThread starterSpokane, Wa · Apr 21, 2010#37 Originally Posted by sqcomp ↑
If you'd believe it, the easiest part was crimping the terminations. Justin purchased some progressive hand crimper...it's a fancy little vice gripped little jobbie. I was able to crimp the terminations with one hand.
Easy maybe.... but you didn't feel like a man afterwards like you do when you get done smacking an 1/0awg crimp terminal with a mallet or hammer.
Palmer812North Carolina · Apr 22, 2010#38You know why those are so expensive? They are made in Germany. You know the Germans always make good stuff.😁
derickveliz2Central, MA · Apr 26, 2010#39.
I need more friends... (o:
D.
goku87AK · Apr 28, 2010#40Why is audison and hertz stuff so hard to find? I would love to have their stuff because it's really high quality, but it's just retarded expensive from dealers.
_S7V7N_South Texas · Apr 29, 2010#41I'm getting ready to rip up my trunk again and redo the amp set-up..I need a bigger box..Wayy bigger.
_S7V7N_South Texas · Apr 29, 2010#42How much airspace you working with ? Right now i'm like at 1.0 cubic ft per chamber, i want at least 2.0 Per sub. I'm going to go sealed for now till i Burn these puppies out.
_S7V7N_South Texas · Apr 29, 2010#43Trust me i know how it is. When i go in and ask the mechanics about upgrading the alternator, or what's the fuses on the positive side of the battery terminal, they ask " why " i say " why not ? " then they see the set-up and are amazed that a yarii can put a bit of thump out. I plan on keeping this lil biatch just cause it's good on gas and it's almost paid off, it's an 07 with 17 k on it, this thing will last me forever.
talnlnkyThread starterSpokane, Wa · Apr 29, 2010#44 Originally Posted by
_S7V7N_ ↑ Trust me i know how it is. When i go in and ask the mechanics about upgrading the alternator, or what's the fuses on the positive side of the battery terminal, they ask " why " i say " why not ? " then they see the set-up and are amazed that a yarii can put a bit of thump out. I plan on keeping this lil biatch just cause it's good on gas and it's almost paid off, it's an 07 with 17 k on it, this thing will last me forever.
People are stupid, end of story. I could take one of those 1/32 model replica cars and put a loud stereo in one of them (tho it wouldn't be loud when playing below 1khz).... Size doesn't matter... it really doesn't, ESPECIALLY when talking about the size of the car.
_S7V7N_South Texas · Apr 30, 2010#45They just have no imagination. They're stuck on only crx's and hatchbacks being the only cars to throw a nice system in. I usually just smile and say " crank up your system " . End of story. Majority of the time they give you the ol story of " well i had one a few yrs back but i took it out because it started to give me probs ..bla bla bla """ It's far easier to be a hater than to say " wow bro, good luck on the install "
goku87AK · Apr 30, 2010#46"retarded expensive" is a term I use very very loosely. I just looked around for the quote I got from the dealer for cost, couldn't find it of course, and the hertz website is giving me a "80004005" error so I'm pretty much going completely off my terrible memory. For two 15"s (unsure what line, HXsomething?) I think it was ballpark of $1100. Granted, they did have a ridiculously high sensitivity rating, the power handling didn't quite excite me all that much, obviously since I can't remember what it was. But $1100 for two 15s? That seems a little excessive. If I had some numbers I could throw it in that sexy spreadsheet you like so much. Maybe their site will be up tomorrow.
Also, ditch the spare tire. You don't need it. It's pretty worthless when you do need it. Can only go like 35 on it or something to that effect. And probably 90% of the time when you "need" it you are in an area where you could just call up a friend and say "hey I need help! Can you come pick me up so we can go grab my spare really quick?" What I do (since I have my amps in my spare tire spot) is have a fifth tire in my apartment, so if I get a flat it's a quick swap then I can just patch/plug the other tire whenever it's convenient for me.
Buuuuuuuuuuut that's just my personal donut opinion.
derickveliz2Central, MA · Apr 30, 2010#47 Originally Posted by sqcomp ↑
The Toyota dealership is supposed to drop off the bezel piece and we have the 1 DIN Metra kit already...I'm just excited about powering the piece up and putting up on the head unit eye candy thread. I think I'm the only Yaris with a P-01 so far...
That sounds great sqcomp, 2 questions, would you have the part # for the Bezel?
and is this the Metra kit?
Picture not included in this copy Thanks
derickveliz2Central, MA · Apr 30, 2010#48 Originally Posted by sqcomp ↑
Toyota Bezel part, it is 55405-52640. List price is $75. I've seen it online for as low as $56 without shipping. If you go into the dealership they cna print off a dash blow up that will detail the parts you need. The nice thing is that we're ordering the part on the shop's account with the dealership. That should save a few dollars AND get the dealership to deliver the part to me. Nice.
Thanks, I called Toyota (local) asked for the Bezel, they sell it for $86.21, witch is Ok with me.
Now a "Dash" blow up, for the parts that we need...? what other parts do we need?
is this what you are talking about?
Picture not included in this copy Thanks
D.
derickveliz2Central, MA · Apr 30, 2010#49 Originally Posted by sqcomp ↑
They gave me a different blow up. It was for the entire dash. Okay, Metra doesn't make the kit for ours...I'm sourcing mine from Best Kits & Harnesses. The part number is BKTOYK969
I'll try to find more diagrams for the DASH, maybe here in YarisWold we could find one.
So the Kit is about $30, do we need to buy the Harnesses too? Picture not included in this copy goku87AK · May 1, 2010#50Three things:
1) Nice Makita. The light weight is awesome for doing installs. 👍
2) Looks really nice, excited to see it installed.
3) WTF is up with the stack of change?