Yarisworld Archive

"Parmas" Motor

490 posts · 124,989 views · page 8 of 10

Replies continued

cali yarisCanoga Park, CA · Oct 29, 2010#351
^ Me neither but I would like to do a digital dash, right in front of me (where it belongs? LOL), someday.
ParmasThread starterML · Oct 29, 2010#352
I brought the car to my tuner that specifically recommends Haltech ecus. He worked about 2 days trying to start but the engine persist to misfire and cannot remain idle at all. We checked the triggerring signal and it seems to be inconsistent everytime we try to start the engine. He also tried to vary filtering levels but invain.

My tuner is about sure that the problem might be coming from an issue specifically related to the 36-2 + 3 Sequence Toyota use.

Garm, did you had any issues with your AEM ecu regarding triggering?
cali yarisCanoga Park, CA · Oct 29, 2010#353
^ no problems at all, sorry!
ParmasThread starterML · Oct 30, 2010#354
The problem is about sure that is a software issue but we need Haltech support to solve it before we continue.... sooo the car goes back again into my fu..ing garage.

If haltech will not solve it within the next month I have no choice but to make custom triggering wheels for the crank and the cam using Haltech Hall Effect sensors.

I hope this would be the last issue as I am really pissed of about this engine and it is making me sick.
cali yarisCanoga Park, CA · Oct 30, 2010#355
oh man that is tough -- so sorry you've gone through so much to get this far, but it's SO close now!
ParmasThread starterML · Nov 20, 2010#356
ITS ALIVE IT'S ALIVE


A fu*king ignition module was the reason. Thanks to haltech support I was able to solve the problem after they got me replaced with new coils instead. Now it idles like a sweet girl smiles at you and rev up like never before and this only with a map sent from haltech!!

Now I need to install the last few bits:

- NST 3x pulley kit
- Nitto torque damper
- Celica 2ZZ-GE intake manifold + 2ZZ-GE 72mm throttle Body


Also I noticed that from the output hole of the turbo (that goes into the intercooler piping) it leaks some oil from it. It happens when revving much the engine. Could be the seals of the turbo that need replacement or should I leave it?

What I need to do? Is it expensive to repair it? What are the items needed?
cali yarisCanoga Park, CA · Nov 20, 2010#357
congrats that is awesome
ParmasThread starterML · Nov 20, 2010#358
Originally Posted by cali yaris ↑
congrats that is awesome
What do you suggest about the turbo oil leak problem garm?
YodaFL · Nov 20, 2010#359
What's your oil pressure like when u rev it?
ParmasThread starterML · Nov 27, 2010#360
And look what arrived yesterday!

A 2ZZ intake with a 70mm throttle body! Tried fitting on spare engine and there are only minor issues to solve :

- To mate the 1NZ intake flange with the 2ZZ intake
- Some clearing issues on the front ( It could be that the intake hit radiator piping)
- Right Mounting holes
- Increase length of right intercooler pipe due to throttle body at an angle

If this works I cannot say what are the gains but at least I can show that it can be done!

6 attachments not included in this copy

Blown_xaVirginia · Dec 12, 2010#362
Originally Posted by Parmas ↑
The problem is about sure that is a software issue but we need Haltech support to solve it before we continue.... sooo the car goes back again into my fu..ing garage.

If haltech will not solve it within the next month I have no choice but to make custom triggering wheels for the crank and the cam using Haltech Hall Effect sensors.

I hope this would be the last issue as I am really pissed of about this engine and it is making me sick.
they (haltec), may have told u this already, the crank trigger settings are the same as the scion tc (they flew to our shop to create basemap on our dyno). are you using the sport 1000 or sprint 500? if you ever run into the issue of accelerating hard thru the gears and then the car hits a "cut", pm me and ill tell u the fix, has to do with the crank trigger voltage and filter settings.
cool build!
ParmasThread starterML · Dec 13, 2010#363
Originally Posted by Blown_xa ↑
they (haltec), may have told u this already, the crank trigger settings are the same as the scion tc (they flew to our shop to create basemap on our dyno). are you using the sport 1000 or sprint 500? if you ever run into the issue of accelerating hard thru the gears and then the car hits a "cut", pm me and ill tell u the fix, has to do with the crank trigger voltage and filter settings.
cool build!
Hi man, the issue wasn't the triggering but the ignition modules. Haltech replaced them with built in ignitor coils and worked like a charm.

Now I am tuning the engine myself and till now I done mapping of the engine with 9psi boost and 5000rpm [with AFR LOW 14 / HI 10.5 (boost) ]. This week I am preparing the car for the final tune which is the 2ZZ intake. If all goes fine, I have to retune the engine for the larger o/d of the 2ZZ intake Throttle Body (70mm) and runners 😁
Blown_xaVirginia · Dec 13, 2010#364
Originally Posted by Parmas ↑
Hi man, the issue wasn't the triggering but the ignition modules. Haltech replaced them with built in ignitor coils and worked like a charm.

Now I am tuning the engine myself and till now I done mapping of the engine with 9psi boost and 5000rpm [with AFR LOW 14 / HI 10.5 (boost) ]. This week I am preparing the car for the final tune which is the 2ZZ intake. If all goes fine, I have to retune the engine for the larger o/d of the 2ZZ intake Throttle Body (70mm) and runners 😁
sweet, love that haltec software i bet. It is really nice. That 70mm throttle body should open up a lot of power.
fnkngrvIn The Hotbox · Dec 13, 2010#365
the human head weighs 8 pounds
ParmasThread starterML · Dec 15, 2010#366
Originally Posted by Blown_xa ↑
sweet, love that haltec software i bet. It is really nice. That 70mm throttle body should open up a lot of power.
After my experience with this unit, I can say it is worth the money and since now I seen no issues with it. Solid rock ecu, full of description on all option tabs ( a must for beginners ) and reliable performance. Also to consider that it is good for almost any engine and features latest cam control technology + stock sensor compatability.

I am no expert on tuning, and with this unit I was capable to tune a reliable 9psi boost till 5000rpm (at least for now :) )

I am hoping better response with this intake. Let's be straight, If any would tell you what do you prefer between a custom intake or a Toyota proven one, I vote for Toyota and here it is! 😁

I hope it will be ready for a christmas present to my self 🙂
ParmasThread starterML · Dec 15, 2010#367
Originally Posted by cdydjded ↑

1. Can you explain to me what is your logic on using a manifold from an engine that is 1.8 liters & revs 8000rpm on a 1.5 liter that revs 6300rpm?

2. Are you aware that intake manifolds are designed to work within a specific RPM range?

3. I dont get why you would think that the factory manifold from the 2ZZ would be a better manifold than a custom one engineered to work for a specific engine combination.
1. I am no expert in intake manifolds but I am sure this manifold will definetly show more gains than the stock one. Since it was used on a 1.8L engine which revs 8000rpm it will surely be a plus with a 1.5L turbo engine.

2. I am sure it is the case, but who cares now that I am turbocharged. The stock intake wasn't designed to be used with forced induction.

3. The only answer for this is the price. The 2ZZ manifold + 2ZZ TB cost me half or lower than a quoted custom intake manifold only!
Bluevitz-rsOshawa, Ontario, Canada · Dec 15, 2010#368
Do you have any pictures of the progress on the manifold? Is he just custom fabricating the upper portion of the manifold so it fits the 1NZ head and the lower part of the 2ZZ manifold?
Bluevitz-rsOshawa, Ontario, Canada · Dec 15, 2010#369
Originally Posted by cdydjded ↑
1)Again you yourself admit no expertise on intake manifolds. So your logic makes no sense. You are going to waste your time & money.
2)You are correct about the stock manifold, but no one has reached the max limits of it. And the 2zz was also never designed for boost.
3)You will never get anywhere by cutting corners, especially price. Cheaper is never better. There are many reasons custom intake manifold are expensive.
Well, the way you're giving advice you seem to be an expert on intakes manifolds. So how would you go about improving forced airflow without spending 5 grand on design and testing until you have the best possible flow you can have?
Bluevitz-rsOshawa, Ontario, Canada · Dec 15, 2010#370
well the 2zz manifold does indeed have shorter runner than the 1nz, so I don't see why it wouldn't be better.
ParmasThread starterML · Dec 16, 2010#371
Originally Posted by cdydjded ↑
After reading 21 pages of post all I can see is an engine that makes 250hp & that Parmas cant stop adding parts to his car. He need to stop making adding thinga & tune & dyno the car as it is. Thats my 2 cents...
I asure you this "adding thinga" is about to stop as this is my last engine upgrade I intend to do on the car. From the beginning, I never been proud having that plastic intake manifold and I always thought of something to replace it. The problem was the costs and when I saw this intake I was actually in love.

If this intake shows better or even a slight difference in response, I would never say it was money wasted because I like the setup more with this intake rather the stock one.

I am sure a custom one specifically for the setup would better but I don't have that kind of money to waste more on engine parts. After all finished, I intend to dyno the car to get the results.
cali yarisCanoga Park, CA · Dec 16, 2010#372
After reading 21 pages of post all I can see is an engine that makes 250hp & that Parmas cant stop adding parts to his car.
wow. Do you enjoy trying to make people feel bad about their projects?
YodaFL · Dec 16, 2010#373
^rofl lol
ParmasThread starterML · Dec 16, 2010#374
Originally Posted by cdydjded ↑

If one is not aloud to give an opinion or states facts here then what is this forum for?

He can do whatever he want. I nor anyone has the right to stop him. But I can advise him on what I feel is a waste of time & $$$. If Im wrong then ILL be the first to admit it.
The fact that matters is how you put your opinion in a forum and to think before jumping to conclusions. I don't won't to say you are right nor wrong on this intake subject but yet you can't aswell.

I don't know you, nor what do you own but if you ever got a chance to put a 2ZZ intake on our engines and proved that on dyno that would not worth the money then you have all rights here. But since you are putting all words just like a matter of theories and no plausable real numbers, you can never say I am wasting time and money!

If I had the money I would dyno with the stock intake and after with the 2ZZ intake. At least I am one of the people who take risks on their project to succeed. If not, go rewind and all what there was goes go back again!
ParmasThread starterML · Dec 16, 2010#375
Originally Posted by cdydjded ↑
IMO your wasting you time & $$$. It doesnt matter if you accept it or not. I know what I know & what you are doing has no logic. All I can say is prove me wrong. I want you to succeed. I will be the 1st person to say I was wrong. Good luck : )........
Too expensive to prove you wrong so that ends You're right doesn't it 😆
ParmasThread starterML · Dec 17, 2010#376
Originally Posted by cdydjded ↑
Sorry didnt understand what you said.....
To prove you wrong, I need to do a custom intake, dyno it and after getting results.... remove the custom intake, replace with the 2ZZ intake, dyno it and compare.

But never mind, I don't have that time or money to do such thing
Bluevitz-rsOshawa, Ontario, Canada · Dec 17, 2010#377
Originally Posted by cdydjded ↑
BTW you are aware that weapon R has a sheet metal manifold for the xB? It would be alot easier to modify that manifold to our car.....
His car's a first gen, so it would be bolt on.
ParmasThread starterML · Dec 17, 2010#378
Originally Posted by cdydjded ↑
Good point, there you go, there's a low cost logical option : )
Low cost? I just went to the weapon r website and the price is as high as $600 + $? shipping. The 2ZZ intake + throttle body + shipping was $300. Add a $50 job to make the adjustments + $80 intake flange.

For about $430 I get an intake with only welding on the flange, a 70mm throttle body which the weapon -r don't include and if I am not mistaken the runners of the 2ZZ are shorter which is better.

Also I can add $20 for polish and spray the intake as shiny as the weapon-r and that would be all.

I done my homework 🙂
ParmasThread starterML · Dec 18, 2010#379
$478 dollars should be a good deal if it includes shipping costs, duty charges and a throttle body!

Don't get me wrong but I forgot to tell you that one of the main reasons I decided for the 2ZZ intake, is that I like to own unique parts for my build.

As regards to not believing in paying $50 should be understood from here. The person in charge of this, worked all the stainless intercooler piping, exhaust manifold, turbo downpipe, rear mounting hardend and full exhaust on my car. Since a lot of work was done, he is ready to take off some $ from the total as I was a fellow customer through out these years. Cheers
turboecho2005Ottawa, Ontario · Dec 18, 2010#380
Originally Posted by cdydjded ↑
IMO your wasting you time & $$$. It doesnt matter if you accept it or not. I know what I know & what you are doing has no logic. All I can say is prove me wrong. I want you to succeed. I will be the 1st person to say I was wrong. Good luck : )........
Putting any money into a car is a complete waste.

Turbocharging these econoboxs is a complete waste also.

And really who cares about time. Building a car isn't about who can make their car faster, sooner. Its about learning and enjoying the time working on the car. I've been working on cars for about 20 years and hope to keep my echo for atleast another 20 years. My ultimate plan for my echo is to make over 1000hp (since over 500hp is currently not enough 🤷). But this is also a HUGE waste of money. As long as you know you are wasting money then its ok.

Sure its great to have a car and modify it. I have an 89 Isuzu imark Rs. I have spent $5000 restoring the body of the car to have it 100% flawless. The car is bone stock though. Its just my summer daily driver. The car has a book value of maybe $2000. In the end i am sure i am near $7k or $8k from start to finish. Why did i do it... because i love isuzus and have been working on them for over 10 years now. But I don't plan on ever selling it either. Having a car project is about working on a car... enjoying the time spent... learning new things... getting satisfaction out of it and then moving on to another project.

As long as parmas enjoys working on his car. Gets satisfaction out of it. Who cares about how much money and time he spends.
Focus_Sh1ftNew Jersey · Dec 18, 2010#381
Turbocharging these econoboxs is a complete waste also.
Sorry, but I completely disagree. 8 psi doubles the whp on these cars, so if anything these are arguably some of the smartest cars to turbocharge. If you're suggesting fuel economy goes in the crapper afterwards, I'd have to disagree again. With a good tune, I haven't noticed a loss in fuel economy at all.

In fact, everything you're saying ends up being a contradiction. Spending money on modifying a car is NOT a waste if you thoroughly enjoy what you're doing. If you're out to impress others, then you're pissing away a ton of money. Especially because there's always going to be people who are never impressed (aka jealous as hell).
cali yarisCanoga Park, CA · Dec 18, 2010#382
^ If you take his post in its entirety and don't cherry pick one sentence, you can see that what he meant by "waste" is that you don't get your money back out of the investment in a tangible way.

turboecho has spent more than most of us on his projects and was happy to do it. You can see by the last sentence that he is cheering Parmas on.

carlos, you have 633 posts -- is there one where you admit you're wrong, about anything?

Go for it Parmas, keep at it - your build has taught me a few things.

I think a Mod should delete all this crap - including mine.
changchewsoonMalaysia · Dec 29, 2010#383
ah, i've been out of action for a while due to frequent business trips. i see that parmas has made improvement and progress! kudos bro!

well, i've been adding parts non stop to my car too and it has made zero horsepower so far because the built isn't finished yet.

so, i guess i need to start feeling like sh*t now because somebody here thinks by doing all these mods and adding all these parts its a waste of time eh?

i've learned so much from this site because there are good people here whose willing to share, and i hope to be able to return the favor in the future as well.

heh, parmas i think you should ignore all those nay sayers and just go ahead and complete your build. do what you want with it, and we thank you for sharing it with us.
ParmasThread starterML · Dec 30, 2010#384
Originally Posted by changchewsoon ↑
ah, i've been out of action for a while due to frequent business trips. i see that parmas has made improvement and progress! kudos bro!

well, i've been adding parts non stop to my car too and it has made zero horsepower so far because the built isn't finished yet.

so, i guess i need to start feeling like sh*t now because somebody here thinks by doing all these mods and adding all these parts its a waste of time eh?

i've learned so much from this site because there are good people here whose willing to share, and i hope to be able to return the favor in the future as well.

heh, parmas i think you should ignore all those nay sayers and just go ahead and complete your build. do what you want with it, and we thank you for sharing it with us.
Agreed ! 🍻
johnny_vitzHamilton, Canada · Jan 1, 2011#385
Awesome build parmas, don't let anyone tell you different. Did you make a final choice on which intake to go with?
ParmasThread starterML · Jan 1, 2011#386
Originally Posted by johnny_vitz ↑
Awesome build parmas, don't let anyone tell you different. Did you make a final choice on which intake to go with?
Still working on fitting the 2ZZ intake although we stopped due to holidays. Updates next week....
ParmasThread starterML · Jan 14, 2011#387
Today I woke adventurous and tried to explain myself why this oil leak is happening.

Since the turbo is behind the engine, compactly placed between the rear of the engine bay and a squid form long manifold it was always like a taboo for me since it is out of reach. I managed to reach the lower inlet part of the turbo and got a nice black oil leak on my finger. If I could explain more exactly, it was exactly at the Big Circlip on the lower intake side (The upper side is dry)Attachment 2743Attachment 2742Attachment 2741. A walk with my finger around it feeled wet (but not much with oil).

During my adventure I noticed the turbo oil feed and drain. They are not exactly in a vertical position (feed north and drain south) but they look more (feed NorthWest and drain South east). Apart of that, the drain is fixed with a 45 degree fitting and then slanting (not vertical) downwards.

The last picture posted why the turbo was mounted this way up because if we tilted more it would hit the engine top cover. So I ask, is there a way to clock the turbo right to get a vertical feed to drain? Also When clocking the turbo will it move only the center bearing housing?

3 attachments not included in this copy

ParmasThread starterML · Jan 14, 2011#388
Thanks cdydjded...

The drain is about double the size of the feed that is sure.

What do you mean by scavenge pump?

I don't know exactly what do you mean by oil inlet restrictor but the turbo feed fitting has an inner hole diameter of about 2~3mm

I know ball bearing turbos don't need much oil to work efficiently but how can I know I am giving the right amount of oil flow/pressure?
haschelEastern township Qc · Jan 14, 2011#389
Oil pressure in the turbo must be:

Idle hot: 5 psi
Maximum load: 25 psi

Idle hot min. flow: 0.1 gal/min
Maximum load: 0.5 gal/min
ParmasThread starterML · Jan 15, 2011#390
Originally Posted by haschel ↑
Oil pressure in the turbo must be:

Idle hot: 5 psi
Maximum load: 25 psi

Idle hot min. flow: 0.1 gal/min
Maximum load: 0.5 gal/min
From where did you get this information? Is it a general rule on ball bearing turbos?
YodaFL · Jan 15, 2011#392
Originally Posted by cdydjded ↑
Dont worry about the scavenge pump. It really doesnt apply to your issue. You oil feed line should be a -3 or -4 hose & your oil return should be a -8 or -10.

Here is a pic of the oil feed pressure restrictor:
Attachment 39382

This lowers the oil pressure going into the turbo. You dont need any more than 30-40psi of oil to go into the turbo.
Question. What if the restrictor is placed not on the turbo itself but from the feeding source and the the feed line run from it to the turbo. You should get the same pressure through the line to the turbo right. Reason i ask is that it would be a real pain and much labor for me to take out the turbo to put the restrictor on it. I would rather put it on the source.

1 attachment not included in this copy

ParmasThread starterML · Jan 19, 2011#393
And here is a nice view of the intake almost finished with the 70mm throttle body flange.

Still need polishing and cleaning metal residue and we are good to go!

3 attachments not included in this copy

cali yarisCanoga Park, CA · Jan 19, 2011#394
looks familiar 🙂
ParmasThread starterML · Jan 20, 2011#395
I couldn't resist not to take a picture on the car with the engine bay looking messy but man Fu*k me I'm happy with this intake already. It looks gorgoues and I hope it feels better than it looks like!

This is estimated to finish this week as I am doing a custom catch can (Finally ! ) , re-routing of the first & last part of the intercooler piping and some minor issues with the exhaust hitting the frame chassis.

Prays god this will not give me hard time to settle the engine ones again ..... we have some tuning to re-do!

2 attachments not included in this copy

Scubaru Stevecalgary · Jan 20, 2011#396
questions...
where did you get that?
how can i get one?
will it fit under the stock plastic cover?
ParmasThread starterML · Jan 20, 2011#397
Originally Posted by Scubaru Steve ↑
questions...
where did you get that?

From a great guy nicknamed Zisco

how can i get one?

Unfortunately its custom made job, not exactly available for sale

will it fit under the stock plastic cover?

I don't see why it shouldn't

Cheers
YodaFL · Jan 20, 2011#398
i want dyno
scioncrewHB · Jan 20, 2011#399
i like the way it looks 👍
johnny_vitzHamilton, Canada · Jan 21, 2011#400
That is one sexy intake!