Grats on your podium place. I really want to do this swap now and run SMF with the civics. hahaha
The 2zr-fe engine swap guide
414 posts · 433,293 views · page 7 of 9
Replies continued
Thanks man! You will need Rcomps to do well in SMF, and an LSD helps a lot too!
Definitly. plan on doing the LSD with lightened flywheel. I got a voucher for a set of tires from a 1st place win. Will probably go ahead and get those BFGoodrich 225 R1S... but was debating on getting a set of 16" rims and go to 245.... I don't think I want to sacrifice acceleration for cornering though...
I've ran 15x8 and 225/45's and that's a lot of grip. But you will need to relearn the cars behavior....it's so much faster
If I do Rcomps, I plan to run an 8" rim with 245, maybe 255 if the price is right. With Rcomps, they are designed to have that mushroom sidewall because of how stiff they are. 225 on a 8" rim is ideal for a street tire (200+tw) because you want either lateral or a slight stretch on the side wall because you want the least amount of flexing of the tire side to side to the road.
I used to run SMF in the CRX and ran the Khumo V710. I tried them out on the Yaris when HS was allowed to have Rcomps before they changed it from H Stock to H Street. Rcomps really bring out the body roll in a yaris, LMAO.. Lets just say I was warned about getting on 2 wheels with R comps with stock suspension....
I used to run SMF in the CRX and ran the Khumo V710. I tried them out on the Yaris when HS was allowed to have Rcomps before they changed it from H Stock to H Street. Rcomps really bring out the body roll in a yaris, LMAO.. Lets just say I was warned about getting on 2 wheels with R comps with stock suspension....
So if the 2zr motor is pretty easy swap.. I am curious, being that the corolla uses the 2az motor in the XRS in mexico as well as the 2zr, if the 2az would be somewhat similar....
I think first you'd have to check if both motors use the same mounts in the corolla.Originally Posted by ilikerice ↑So if the 2zr motor is pretty easy swap.. I am curious, being that the corolla uses the 2az motor as well as the 2zr, if the 2az would be somewhat similar....
The other issue is the engine harness for the 2az likely doesn't match up to the yaris harness like the xd's does.
Doesn't mean it wouldn't work, your just have a lot of rewiring to do and your want to have wiring diagrams for both cars to know what ever wire does on the engine harness
Doesn't mean it wouldn't work, your just have a lot of rewiring to do and your want to have wiring diagrams for both cars to know what ever wire does on the engine harness
True true.. also size may play a factor. Probably not enough room in the yaris if it is a tight fit in a corolla
Originally Posted by ilikerice ↑True true.. also size may play a factor. Probably not enough room in the yaris if it is a tight fit in a corolla
Also make sure if you run just a motor swap without the transmission, that the 2AZ mounts up to the Yaris trans. You may want to do a whole powertrain swap with trans and axles.
Sent from my iPhone using Tapatalk
the 2zr in considerably tallker than the 1nz and seems to be wider as well. Not too sure how the 2az compares size wise to either engineOriginally Posted by ilikerice ↑True true.. also size may play a factor. Probably not enough room in the yaris if it is a tight fit in a corolla
Yea, be we are talking about a 1.5L to a 1.8L which having a longer stroke in the crank (if the cylinders are the same size) will make the engine taller and wider obviously.. but now the 2az is a 2.4L, so I am sure that boy is much fatterOriginally Posted by tmontague ↑the 2zr in considerably tallker than the 1nz and seems to be wider as well. Not too sure how the 2az compares size wise to either engine
That's actually pretty east to research, you just need a subscription to Toyota TechInfo. 😁Originally Posted by tmontague ↑The other issue is the engine harness for the 2az likely doesn't match up to the yaris harness like the xd's does.
Doesn't mean it wouldn't work, your just have a lot of rewiring to do and your want to have wiring diagrams for both cars to know what ever wire does on the engine harness
I actually located and prepared to do the 2az swap 4 months ago. A guy wanted a 2zr swap, so I offered him mine and I would attempt the 2az.
The project got abandoned once the buyer backed out, oh well. I'm sure every 2az ECM has immobilizer anyway
The project got abandoned once the buyer backed out, oh well. I'm sure every 2az ECM has immobilizer anyway
The 2AZ also mates to an E351 gearbox, so it's probably not a direct fit to the C50.
Needing a transmission and axles also makes the 2.4L swap much more difficult and expensive. It would be cool but not easily performed like the 2zr. It may be cheaper to buy a turbo kit for the 2zr vs attempt the 2az swap
I'll just leave this here...Originally Posted by ArmstrongRacing ↑It may be cheaper to buy a turbo kit for the 2zr vs attempt the 2az swap
http://www.turbokits.com/Toyota/Corolla/Turbo_Kits/
Turbo kit... would Probably have to be custom header and down pipe... but would use the piping and other components from a yarisingle zage kit..
My wife's Camry has that engine, and it's a pretty huge block. I can't think of any way you could make it fit into a Yaris, at least not without a lot of cutting and welding in the engine bay. Plus, I think it would make a Yaris very nose heavy.Originally Posted by ilikerice ↑.. but now the 2az is a 2.4L, so I am sure that boy is much fatter
Sent from my phone with Tapatalk. Please excuse any typpos.
ON SALE FOR $2990!!!!!Originally Posted by CrankyOldMan ↑
Originally Posted by ArmstrongRacing ↑ON SALE FOR $2990!!!!!
Is that a lot? I've never researched mods like this before
Sent from my iPhone using Tapatalk
That's a steal!
Sent from my phone with Tapatalk. Please excuse any typpos.
Sent from my phone with Tapatalk. Please excuse any typpos.
5 bucks less
http://monkeywrenchracing.com/produc...-matrix-09-13/
But you will probably would like to upgrade the turbocharger to gt2860rs
http://monkeywrenchracing.com/produc...-matrix-09-13/
But you will probably would like to upgrade the turbocharger to gt2860rs
A little write-up on how to convert the 2zrfe over to a external oil filter:
http://www.armstrongfamilyblog.com/a...ter-conversion
http://www.armstrongfamilyblog.com/a...ter-conversion
Originally Posted by ArmstrongRacing ↑A little write-up on how to convert the 2zrfe over to a external oil filter:
http://www.armstrongfamilyblog.com/a...ter-conversion
Very cool!
Sent from my iPhone using Tapatalk
The 2zrVios weight at the National Tour. They had the scaled pads backward of course haha
1 attachment not included in this copy
Undisputed lightweight Yaris champ lol
Not even close. But it will be interesting to see how light he can get the sedan, because I would certainly consider going that route...Originally Posted by ern-diz ↑Undisputed lightweight Yaris champ lol
Our 2007 chassis H Prod car (with carbon hatch and hood, when we ran 13" wheels and tires) 😉
Picture not included in this copy
Picture not included in this copy
Originally Posted by Jason@SportsCar ↑Not even close. But it will be interesting to see how light he can get the sedan, because I would certainly consider going that route...
Our 2007 chassis H Prod car (with carbon hatch and hood, when we ran 13" wheels and tires) 😉
Picture not included in this copy
Picture not included in this copy
That's fantastic. Lightweight is name of the game! Faux headlights?
Sent from my iPhone using Tapatalk
Stock lens cover, just cut away the rest of the fixture.Originally Posted by m.flores.0928 ↑That's fantastic. Lightweight is name of the game! Faux headlights?
Sent from my iPhone using Tapatalk
Originally Posted by Jason@SportsCar ↑Stock lens cover, just cut away the rest of the fixture.
Clever, I like it.
Sent from my iPhone using Tapatalk
WOW! Yeah I've got a long way to go, I still have all of the standard equipment i.e.; lights, wiper, evap system, EPS system, glass and regulators, and the passenger seat is there for ride alongs 🤣...Originally Posted by Jason@SportsCar ↑Not even close. But it will be interesting to see how light he can get the sedan, because I would certainly consider going that route...
Our 2007 chassis H Prod car (with carbon hatch and hood, when we ran 13" wheels and tires) 😉
Wow, 1814 total.
Mmm them 13s though <3 wish I could run those on mine.
We gave up on those, the tires overheated quickly, and braking suffered with the small contact patch.Originally Posted by Dabuu ↑Mmm them 13s though <3 wish I could run those on mine.
I'd run them purely for aesthetics, and autocross. I love small wide wheels!
Good to know, I was trying to track down a set of Enkei, Panasports, or Minilites on the market cheap an used. I talked to FastBrakes the other day though, and they said they'd be willing to do a set of 11.0 Wilwood Dynalite front brakes at 15lbs per side versus what he said was the normal iQ brakes at 25lbs. per side, to further reduce my unsprung weight, so I'll probably just keep my 15x7 VOLK TE37s and 195/45/15 Toyo T1R since the combo is down to 25.1lbs each. I personally want to take advantage of every available one of the 94 horses my car came stock with before I modify too much in the way of the engine. Thanks for sharing Jason, this was really informative.Originally Posted by Jason@SportsCar ↑We gave up on those, the tires overheated quickly, and braking suffered with the small contact patch.
It is not easy to find a 13" that will clear the Yaris brakes without sticking them way out of the fenders, Jongbloed was able to do it, but they were costly. The Jongbloed was 8lbs, so only about 1lb less than an Enkie RPF1 or Volk, the real weight savings is the tire.Originally Posted by Dabuu ↑I'd run them purely for aesthetics, and autocross. I love small wide wheels!
http://jongbloedracing.com/wordpress/?page_id=57
Garm had some great looking Compomotives that also fit, which you can still order from the UK. They are not as light as the Jongbloed, but also not as expensive.
http://www.comp.co.uk/wheels/wheels....tion=cxr-20-13
I tired a set of Panasports once that a guy was using on his Miata, in addition to nearly 3/4" difference in offset the wheel was made with I also needed a 1/4" spacer to clear the brake caliper, they stuck out a little.
You need some proper tires, and an ECU so you can skip that 3rd gear shift. 😆Originally Posted by ArmstrongRacing ↑
yea, There is a reason why they call Hoosiers "purple crack".
once you get a taste of that purple crack, you will never go back.. hahaha..
once you get a taste of that purple crack, you will never go back.. hahaha..
I know....the car could be much faster but I spent so much on the gearbox this year I need to make sure the driver mod is worthy....before I fall completely down the rabbit hole LOL!Originally Posted by Jason@SportsCar ↑You need some proper tires, and an ECU so you can skip that 3rd gear shift. 😆
We ordered a custom set of BC DR coilovers today, very excited about this
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
That's impressive power with just bolt ons, do you believe there's significant power up top with a stand alone/tune?
This pull was only with the RPM header, the engine is stock otherwise.Originally Posted by LTHatch ↑That's impressive power with just bolt ons, do you believe there's significant power up top with a stand alone/tune?
Jason@SportsCar has told me the stock ECM cannot fully take advantage of the header, and he has been telling me to tune it for months now. I'm sure the engine is capable of 150 with all of the bolt-ons and a tune
Sent from my SM-G955U using Tapatalk
Is a standalone in the near future for your build? If not, what are you your plans for your Yaris?
Yes I've committed to buying a standalone next year....take full advantage of the 1.8L for a year, then start importing 3zr 2.0L partsOriginally Posted by LTHatch ↑Is a standalone in the near future for your build? If not, what are you your plans for your Yaris?
Sent from my SM-G955U using Tapatalk