Not sure if you're looking specifically for japanese spec 3zr parts, but the new C-HR is equipped with the 3ZR-FAE. Pretty sure we'll see some in the wreckers soon.
The 2zr-fe engine swap guide
414 posts · 433,293 views · page 8 of 9
Replies continued
Whaaaaaat?!Originally Posted by Dabuu ↑Not sure if you're looking specifically for japanese spec 3zr parts, but the new C-HR is equipped with the 3ZR-FAE. Pretty sure we'll see some in the wreckers soon.
That's awesome, I hadn't looked into the CHR yet thank you!
I could just buy the crank and rods, they might fit in the 2zr block since they use the same piston size. Then throw in the high comp pistons
Sent from my SM-G955U using Tapatalk
Check out our blog post on how far we've gone with weight reduction so far...
http://www.armstrongfamilyblog.com/a...it-hole-part-1
http://www.armstrongfamilyblog.com/a...it-hole-part-1
Damn your'e going all out with this. Looking good!
Hello, everyone. Have a query regarding compatibility of xD and corolla 2009 air filter. Does anyone know whether dimensions are the same? I want to use Pipercrosd filter for 2zrfe with xD air box but in their catalogue only corolla is present.
check out last weekends event where we started testing and tuning the NEW BC Racing DR coilovers:
https://youtu.be/y54mtDAWEkg
Here is the coilovers unboxing video with more information:
https://youtu.be/zy95baLeUeQ
https://youtu.be/y54mtDAWEkg
Here is the coilovers unboxing video with more information:
https://youtu.be/zy95baLeUeQ
Here is this weekend's autox where we made the car very tail happy, and we were faster!
https://youtu.be/cZIPy4yPbpk
https://youtu.be/cZIPy4yPbpk
What happens when you take a 2zr swapped yaris to the BMW CCA autocross event? check it out
https://youtu.be/09Z-9DyCdMw
https://youtu.be/09Z-9DyCdMw
Awesome driving! 2zr with a 4.3lsd looks blazing fast! I haven't taken mine out to autox yet, but would love to. I've only autocrossed with calclub, but that was years ago.
I love the end of the 3rd run! Kill all cones.
I love the end of the 3rd run! Kill all cones.
U340E is used from the 2006- yaris (all models minus the IA, to present, so It should fit with Mk2 and Mk3 models)Originally Posted by ArmstrongRacing ↑I went through the wiring diagrams today and verified the 2zr ECM(automatic transmission) and harness are mostly plug-n-play with the Yaris U340E. For you guys using a manual transmission, you need a manual trans specific harness and ECM.
Haha thanks man. You should come out again and get hooked lol.Originally Posted by deng ↑Awesome driving! 2zr with a 4.3lsd looks blazing fast! I haven't taken mine out to autox yet, but would love to. I've only autocrossed with calclub, but that was years ago.
I love the end of the 3rd run! Kill all cones.
Finally got around to changing my rear springs, can't wait to test it out this weekend!
https://youtu.be/_HpcZt-kCAk
https://youtu.be/_HpcZt-kCAk
Enjoyed the install video!
So jelly of the Swifts, the thought crossed my mind when I received my Cusco Street Zeros, but figured I'd see how Cusco's springs perform. So far I'm happy with my 7k/5k set up. I also removed my trd rsb, figured I didn't need it with the 5k rear (compared to the 2.8k progressive springs).
Coming from a spring/shock combo w/ trd rsb, the car was too soft for the track for my liking, plus I was getting understeer at high speed sections, but very likely that I'm not that great of a driver, and not slowing down enough.
Car feels pretty neutral at Streets of Willow earlier this month. Big Willow is the next event, can't wait to destroy my PB!
Can't wait to see your next autox video; oversteer, windshield wiper counter of fury, and killing more cones! (jk, but it is fun! 😛)
So jelly of the Swifts, the thought crossed my mind when I received my Cusco Street Zeros, but figured I'd see how Cusco's springs perform. So far I'm happy with my 7k/5k set up. I also removed my trd rsb, figured I didn't need it with the 5k rear (compared to the 2.8k progressive springs).
Coming from a spring/shock combo w/ trd rsb, the car was too soft for the track for my liking, plus I was getting understeer at high speed sections, but very likely that I'm not that great of a driver, and not slowing down enough.
Car feels pretty neutral at Streets of Willow earlier this month. Big Willow is the next event, can't wait to destroy my PB!
Can't wait to see your next autox video; oversteer, windshield wiper counter of fury, and killing more cones! (jk, but it is fun! 😛)
I considered the Cusco setup for a long time, but the overseas service was hard for me to accept. They are a great product for sure though.
So for with the BC testing we've found that it's better for autocross to have a harder spring in the rear, and aggressive damping. At the track you may want to leave the springs where they are though, safety first out there is more important.
I'm planning to hit Big willow next month with the TRD cup as well
So for with the BC testing we've found that it's better for autocross to have a harder spring in the rear, and aggressive damping. At the track you may want to leave the springs where they are though, safety first out there is more important.
I'm planning to hit Big willow next month with the TRD cup as well
I prefer more rotation. ;)
I'll see you at TRD Cup!
I'll see you at TRD Cup!
Awesome man!Originally Posted by deng ↑I prefer more rotation. ;)
I'll see you at TRD Cup!
Here is last weekends event video:
https://youtu.be/rlzAIsCiUck
Just watched your most recent youtube vid, the car is getting fast, especially in corners. Keep it up man!
You are correct. Since Im only working with 140hp, all of our development attention is on the suspension and driver right now. We are only 1 second behind the turbo/hoosier tire miata currently winning in prepared class. Im still leading in championship points but we need to close that gap to prove we can run this car at the Pro Solo next year and do well.Originally Posted by tmontague ↑Just watched your most recent youtube vid, the car is getting fast, especially in corners. Keep it up man!
Awesome driving. Man does the car accelerate! Looks so fun.
It is a lot of fun, since we only drive it at races Im surprised every time by its acceleration and cornering abilities. Its very capable of winning Prepared class as well....with the right driver.Originally Posted by deng ↑Awesome driving. Man does the car accelerate! Looks so fun.
I finally got one of these rear braces for testing before we do any more spring changes.
https://youtu.be/Jum_wunM7jE
https://youtu.be/Jum_wunM7jE
Check out the latest upgrade on the 2zrVios, Defi Racer Gauge!
Bit.ly/DefiRG
Bit.ly/DefiRG
we have big plans for 2018...including a 6 speed gearbox
https://youtu.be/-wp0Y0_Rqsc
https://youtu.be/-wp0Y0_Rqsc
Hi, my name is Vincent, and it’s my first time posting. I’m picking up an 09 S hatchback this week and I have a motor and ecu with wiring harness from a 10 Corolla that’s been sitting in my garage for a year and a half. What are the main reasons the electrical/wiring setup from the XD are more favorable than the Corolla’s? Could the Corolla’s components be used still, or would the amount of wiring make it unfeasable?
I’m excited to do this swap, and I’d like to use what I already have. Any help would be appreciated!
I’m excited to do this swap, and I’d like to use what I already have. Any help would be appreciated!
Hey Vincent, welcome! If that's Woodstock ON you're not too far down the road from me.. 👍
One of the folks who have completed the swap with the xD harness can elaborate, but basically the xD is the most straight forward because the Yaris and xD share the same platform so everything is plug n' play - install the xD ECU in place of the Yaris ECU, xD engine harness runs to stock ECU location and connects to Yaris body harness, etc.. I'm not familiar with the 2010 Corolla wiring and locations, but I imagine you're in the same boat I am with the Scion (now Corolla) iM harness - will need some changes and relocation of the ECU. I can tell you if it works in the new year, lol.
Lots of good reading and awesome folks here on YW. When you dive into it get a build thread going and document your progress.
-- Adam
One of the folks who have completed the swap with the xD harness can elaborate, but basically the xD is the most straight forward because the Yaris and xD share the same platform so everything is plug n' play - install the xD ECU in place of the Yaris ECU, xD engine harness runs to stock ECU location and connects to Yaris body harness, etc.. I'm not familiar with the 2010 Corolla wiring and locations, but I imagine you're in the same boat I am with the Scion (now Corolla) iM harness - will need some changes and relocation of the ECU. I can tell you if it works in the new year, lol.
Lots of good reading and awesome folks here on YW. When you dive into it get a build thread going and document your progress.
-- Adam
Pretty much what Adam said. The xd shares the same chassis to the yaris so when running an xd ecu and wire harness it is virtually plug and play. With the exception of having to add 12v ignition power to the maf and taking one connector and wires from the yaris wiring harness for the speedometer (iirc).
If you end up going with a corolla harness and ecu then you have to get a wiring digram of the corolla and yaris ecu and figure out what wires and connectors you need to repin so that everything works properly on the yaris chassis side of things.
With an engine swap the tough part isn't just getting the engine to run via an ecu, it is trying to ensure everything in the car is still working that goes along with the engine
Imo if the yaris is your second car then go ahead and take the time to re wire it. If itnisnyour only car and/or dd then source a used xd ecu online and either do the same with an xd harness or just foot the bill and order an oem one. The big challenge with this swap is finding the xd harness and ecu for a manual transmission in the used aftermarket so you don't have to pay out the a*s for a new one
If you end up going with a corolla harness and ecu then you have to get a wiring digram of the corolla and yaris ecu and figure out what wires and connectors you need to repin so that everything works properly on the yaris chassis side of things.
With an engine swap the tough part isn't just getting the engine to run via an ecu, it is trying to ensure everything in the car is still working that goes along with the engine
Imo if the yaris is your second car then go ahead and take the time to re wire it. If itnisnyour only car and/or dd then source a used xd ecu online and either do the same with an xd harness or just foot the bill and order an oem one. The big challenge with this swap is finding the xd harness and ecu for a manual transmission in the used aftermarket so you don't have to pay out the a*s for a new one
Hi all
First time poster as well here after trawling through the site looking at 2zr threads :). I'm from Australia and it would seem nigh impossible to get my hands on the required brackets from a MT XD for a 2zr conversion. I've messaged every person wrecking a Scion XD on ebay only to be told they don't keep them.
Does anyone have an available source for these? I've also tried to purchase them new, but only one is showing as potentially being in stock - the RH one.
First time poster as well here after trawling through the site looking at 2zr threads :). I'm from Australia and it would seem nigh impossible to get my hands on the required brackets from a MT XD for a 2zr conversion. I've messaged every person wrecking a Scion XD on ebay only to be told they don't keep them.
Does anyone have an available source for these? I've also tried to purchase them new, but only one is showing as potentially being in stock - the RH one.
I got mine from the Toyota dealership, but I see full sets of mounts for sell on eBay. If you cant find used mounts you sometimes have to buy new ones.Originally Posted by stidnam ↑Hi all
First time poster as well here after trawling through the site looking at 2zr threads :). I'm from Australia and it would seem nigh impossible to get my hands on the required brackets from a MT XD for a 2zr conversion. I've messaged every person wrecking a Scion XD on ebay only to be told they don't keep them.
Does anyone have an available source for these? I've also tried to purchase them new, but only one is showing as potentially being in stock - the RH one.
Yeah the mounts or isolators should be pretty easy to get a hold of, even in Aus. The parts I'm struggling to find though are the ones outlined in red. Based on the reading I've done, I need all 3 of these as well don't I?
Picture not included in this copy
Picture not included in this copy
Technically you can get away with only using the right hand side mount and isolator.
Do you have a lb or sedan?
Do you have a lb or sedan?
It would be a hatch.
Or am I confused... If I buy the XD dogbone and the XD gearbox isolators, will they bolt to the Yaris equivalent of the parts I've outlined in red?
Or am I confused... If I buy the XD dogbone and the XD gearbox isolators, will they bolt to the Yaris equivalent of the parts I've outlined in red?
Yes technically they will bolt up albeit with some force of a pry bar and an extra hour and cursing to get the bolt through.
Based on my extensive experience of using all of the different types of mounts (xd and yaris) mate the proper bracket with its proper isolator to ensure ease of install.
The only difference is the xd mounts/isolators will place the engine a bit lower, slightly further away from the firewall and the way Toyota engineered it to sit. However using yaris mounts/isolators will also work as that is Tom's current set up I believe.
Either way you will need the right hand side mount and isolator from an xd as the yaris one will not work with the 2zr. The other two that both bolt to the trans case are fine to run either xd or yaris. If you run all xd mounts then it's recommended to run xd shift cables as the yaris ones are shorter and you risk snapping them
Based on my extensive experience of using all of the different types of mounts (xd and yaris) mate the proper bracket with its proper isolator to ensure ease of install.
The only difference is the xd mounts/isolators will place the engine a bit lower, slightly further away from the firewall and the way Toyota engineered it to sit. However using yaris mounts/isolators will also work as that is Tom's current set up I believe.
Either way you will need the right hand side mount and isolator from an xd as the yaris one will not work with the 2zr. The other two that both bolt to the trans case are fine to run either xd or yaris. If you run all xd mounts then it's recommended to run xd shift cables as the yaris ones are shorter and you risk snapping them
thanks tmontague. Appreciate the advice.
I'll keep hunting for a full set of brackets. Sounds like that's the cleanest solution.
I'll keep hunting for a full set of brackets. Sounds like that's the cleanest solution.
Cannot wait to do this to mine. hopefully it works.
If the Yaris harness is removed and an xD harness put in its place, where do the 3 speed sensor wires that go into positions 11, 12 and 13 in the xD CA2 come from? Is there another harness that contains the speed sensor wires to be transfered over?Originally Posted by ArmstrongRacing ↑Here are the highlighted pins that need swapping.
1) If you keep the Yaris transmission: Move the speed sensor wires over to the same spots in the Xd plug CA2.
#3
planning on a 2zz swap into an 06 xa... i plan on using this thread for general guidelines as the comprehensive gist is pretty similar. gotta say that this is by far the most active and extensive thread for yaris swaps that i can find, and it really seems like OP knows what he's doing! big thanks to AR and everyone who contributes for the help!
feel free to shoot me a different direction if you see fit!
🙌
feel free to shoot me a different direction if you see fit!
🙌
A 2zz swap will be awesome, make sure to create your own thread to share the journey
^ I will be watching this, big time!
Just so you’re aware, a 2ZZ will involve cutting the frame to get it in.Originally Posted by rallyxa ↑planning on a 2zz swap into an 06 xa... i plan on using this thread for general guidelines as the comprehensive gist is pretty similar. gotta say that this is by far the most active and extensive thread for yaris swaps that i can find, and it really seems like OP knows what he's doing! big thanks to AR and everyone who contributes for the help!
feel free to shoot me a different direction if you see fit!
🙌
yep, basically gaining 99% of my knowledge from YT vids... saw on AR's channel what will be involved for the cutting of the frame near the tranny.Originally Posted by Bluevitz-rs ↑Just so you’re aware, a 2ZZ will involve cutting the frame to get it in.
my hopes are that the sizes of the 2zz vs the 2zr with a c60 are identical and that the engine bay dimensions in that of the yaris are also the same as the xa bay. along with distance between the hubs. i will have to find out if the axels from a celica will fit as well.
IF the dimensions mentioned above are all luckily the same, my next question is, how did the xd axels fit from the c60 trans to the yaris hubs? new distance (2zr w/c60 in yaris)was spec for the xd axels?? and then i gotta see if it works in my engine bay with celica axels and a 2zz..... 🤷
The xA chassis is the same as the Echo. They have a smaller engine bay. You’ll have to cut both frame rails to fit it in. The 2zz is about an inch longer than the 1NZ and the pulleys will run right through the frame.
I’m not 100% on the axles swap because I used a C160 witch retains the stock axles.
I’m not 100% on the axles swap because I used a C160 witch retains the stock axles.
The xD axles worked perfectly for me since the 2zr and C-transmission were originally designed to be used in this arrangement.
I dont know if the 2zz is longer than the 2zr, but the Celica differential uses the same axle spline as the xD
I dont know if the 2zz is longer than the 2zr, but the Celica differential uses the same axle spline as the xD
The motor mounts place the transmission so you could probably use xD axles then with the C60
Finally read thru all this.
Been working on a 1nz swap into one of my tercels and it was pretty easy. So I naturally thought...whats the next evolution?
Im a bit weird, I like to keep my cars the same displacement as they come, or smaller.
But a 2zr in a tercel would be a monster. I might even consider one for the Yaris as I dont nearly drive the same mileage as I used to. It makes 107whp, 110wtq now. But to gain what, 20-30numbers more and keep using regular gas is looking mighty appealing over finishing my turbo build and run high octane.
I would have to source a wrecked xD from copart to even consider the swap into the yaris that way I get everything i need
Been working on a 1nz swap into one of my tercels and it was pretty easy. So I naturally thought...whats the next evolution?
Im a bit weird, I like to keep my cars the same displacement as they come, or smaller.
But a 2zr in a tercel would be a monster. I might even consider one for the Yaris as I dont nearly drive the same mileage as I used to. It makes 107whp, 110wtq now. But to gain what, 20-30numbers more and keep using regular gas is looking mighty appealing over finishing my turbo build and run high octane.
I would have to source a wrecked xD from copart to even consider the swap into the yaris that way I get everything i need
All good points. As someone who pieced the swap together over a period of 6-9 months, buying a whole donor xD really is the way to go. Assuming you can get the right planetary alignment, of course. An MT xD is really hard to find in the wild, much less totaled with no front end damage.Originally Posted by malibuguy ↑Finally read thru all this.
Been working on a 1nz swap into one of my tercels and it was pretty easy. So I naturally thought...whats the next evolution?
Im a bit weird, I like to keep my cars the same displacement as they come, or smaller.
But a 2zr in a tercel would be a monster. I might even consider one for the Yaris as I dont nearly drive the same mileage as I used to. It makes 107whp, 110wtq now. But to gain what, 20-30numbers more and keep using regular gas is looking mighty appealing over finishing my turbo build and run high octane.
I would have to source a wrecked xD from copart to even consider the swap into the yaris that way I get everything i need
Found a few semi locally with minor damage that "runs and drives" 1 of them is currently at $90 LOLOriginally Posted by CrankyOldMan ↑All good points. As someone who pieced the swap together over a period of 6-9 months, buying a whole donor xD really is the way to go. Assuming you can get the right planetary alignment, of course. An MT xD is really hard to find in the wild, much less totaled with no front end damage.
I know in the first few posts it says you need an 08-09 xD harness but I've seen PDF for 08-10 xD wiring. Ive also picked up a manual trans harness from a '10 xD.
Are these harnesses the same as the 08-09 in everyone's experiences?
Are these harnesses the same as the 08-09 in everyone's experiences?
Yes, all years of the xD use the same engine harness for MT. Part# 82121-52E90.