I think it takes a week to air, I'll keep you guys updated. It was so awesome, he made some bold statements about how fast the car is through the canyon!
The 2zr-fe engine swap guide
414 posts · 433,293 views · page 6 of 9
Replies continued
Sic
Excited to see this....Originally Posted by ArmstrongRacing ↑I think it takes a week to air, I'll keep you guys updated. It was so awesome, he made some bold statements about how fast the car is through the canyon!
Very, very cool! So glad to see yaris love happening like this. Hopefully it will spark new interest in these cars.
So cool man, I feel like I am living vicariously through you. LoL. I hope to hit up some autocross soon.
Can the 2zr fe swap also be done in a 2012 Yaris, ncp131 ?
If so, will the cv shafts all be able to be used, I'm interested in this build?
If so, will the cv shafts all be able to be used, I'm interested in this build?
I'm not sure, I've heard the ECM and chassis harness is different so all of the wiring research would need to be done. Does anyone have the 2012 diagrams yet?Originally Posted by 20yaris12 ↑Can the 2zr fe swap also be done in a 2012 Yaris, ncp131 ?
If so, will the cv shafts all be able to be used, I'm interested in this build?
Thread updated with the Xd transmission mount also, but the center dog bone mount must remain a Yaris part.
The auto trans swap didn't require this, but the manual transmission does
The auto trans swap didn't require this, but the manual transmission does
On my 09 HB, the mounts have to ALL be xD to make it work right. I didn't get the bracket that holds the dog bone to the gearbox, and it doesn't line up. I called the dealership to order a new one, and they show zero inventory in the US. They didn't even know if it could be sourced, but they would place an order and see what happens.
The remedy in the meantime was to get one bolt to line up and then force the bracket over to get two more. The one behind the dogbone is off by several mm, and won't line up.
The remedy in the meantime was to get one bolt to line up and then force the bracket over to get two more. The one behind the dogbone is off by several mm, and won't line up.
That is strange indeed.
My 2zr and Yaris C50 power train has the Xd engine mount, the Yaris bottom dogbone and bracket.....but needs the Xd trans mount still because my Yaris mount had to be forced over
My 2zr and Yaris C50 power train has the Xd engine mount, the Yaris bottom dogbone and bracket.....but needs the Xd trans mount still because my Yaris mount had to be forced over
1 attachment not included in this copy
Notice how the bolt is all the way to the left, because the Yaris trans mount does not fit properly with the 2zr
1 attachment not included in this copy
Armstrong I'm looking at this swap again to get a better idea of parts I'll need and I have a couple Q's for you:
What engine/trans mounts do I need to use a Yaris m/t with 2zr engine? My understanding now is that I'll need the xD engine mount (passenger side) and the drivers side trans mount, but I can leave the Yaris dogbone and bracket? Will this set up allow me to still use the Yaris shift cables?
In regards to my ECU since I'd like to keep the immobilizer option I plan on running a xD ECU, xD immobilizer and I'll have to get a locksmith to program new keys for the xD immobilizer. The other option is to cut the brown k line to the ecu and go with no immobilizer and use my stock keys (cost less $) and still hasn't been tested to work.
Thanks
What engine/trans mounts do I need to use a Yaris m/t with 2zr engine? My understanding now is that I'll need the xD engine mount (passenger side) and the drivers side trans mount, but I can leave the Yaris dogbone and bracket? Will this set up allow me to still use the Yaris shift cables?
In regards to my ECU since I'd like to keep the immobilizer option I plan on running a xD ECU, xD immobilizer and I'll have to get a locksmith to program new keys for the xD immobilizer. The other option is to cut the brown k line to the ecu and go with no immobilizer and use my stock keys (cost less $) and still hasn't been tested to work.
Thanks
You can make the Yaris dogbone bracket work with the xD dogbone, but it's misaligned. You really do need all six mount parts (2x passenger, 2x driver, 2x transmission) to do it right. The xD dogbone bracket has to be ordered from Japan (not in stock anywhere in the US) and takes at least a month to be delivered. I used the xD cables in mine (and they're a little long) but I think Armstrong was able to use the Yaris cables in his. Frogger said that he had issues with the yaris cables being torn out because they were too short.Originally Posted by tmontague ↑Armstrong I'm looking at this swap again to get a better idea of parts I'll need and I have a couple Q's for you:
What engine/trans mounts do I need to use a Yaris m/t with 2zr engine? My understanding now is that I'll need the xD engine mount (passenger side) and the drivers side trans mount, but I can leave the Yaris dogbone and bracket? Will this set up allow me to still use the Yaris shift cables?
In regards to my ECU since I'd like to keep the immobilizer option I plan on running a xD ECU, xD immobilizer and I'll have to get a locksmith to program new keys for the xD immobilizer. The other option is to cut the brown k line to the ecu and go with no immobilizer and use my stock keys (cost less $) and still hasn't been tested to work.
Thanks
The ECU immobilizer will be untested territory, as far as I know. Please let us know how it works out!
Why 6 mount parts? Assuming you replace the doggone as well would that not be 3?
I'm curious as to how Armstrong's cables aligned now that he has essentially the same set up (sans immobilizer) that I plan on running; sedan, 1nz trans, w/ Gatos cables and just a driver and passenger side 2zr mount replacement
I'm curious as to how Armstrong's cables aligned now that he has essentially the same set up (sans immobilizer) that I plan on running; sedan, 1nz trans, w/ Gatos cables and just a driver and passenger side 2zr mount replacement
Each mount is actually two parts--a bracket on the engine/trans and the isolator on the body/subframe.
Sent from my MotoG3 using Tapatalk
Sent from my MotoG3 using Tapatalk
The debate and research on 2zr swap mounts has led me to this conclusion so far:
Sedan
1) The RH Xd ENGINE mount and bracket
2) The LH Xd rubber TRANSMISSION mount part only
3) The Yaris dogbone mount stays
LB
1) ALL xd mounts
Cranky and I compared several measurements and it seems like there is a slight difference in how our engines sat in the engine bay. I recommend going the sedan route and then test fitting the dog bone first...
My Yaris shift cables work perfectly and don't seemed to be stretched at all
Sedan
1) The RH Xd ENGINE mount and bracket
2) The LH Xd rubber TRANSMISSION mount part only
3) The Yaris dogbone mount stays
LB
1) ALL xd mounts
Cranky and I compared several measurements and it seems like there is a slight difference in how our engines sat in the engine bay. I recommend going the sedan route and then test fitting the dog bone first...
My Yaris shift cables work perfectly and don't seemed to be stretched at all
You posted something about a 2.0l rav4 engine on your Facebook page.
Would that fit? And would it be roughly the same process as this swap?
Would that fit? And would it be roughly the same process as this swap?
Yes the 3zrfe has almost the same demensions as the 2zr, The limiting factor being the ECM
you have my interest piquedOriginally Posted by ArmstrongRacing ↑Yes the 3zrfe has almost the same demensions as the 2zr, The limiting factor being the ECM
can you explain a little bit what makes the ECM the limiting factor?
Because we don't have a USDM 3zrfe, I have no service manuals for it either to verify wiring compatibility
*With the help of other YW members, I have started a collection of 2ZRFE parts to make everyones swap a little easier, just contact me for details!*
Ok. This is a hijack but guys I am stuck! I have a Scion xD 5 speed and the transmission has given up the ghost. Replacement transmissions are incredibly expensive or impossible to source. I have been chatting with a fella that said that the Yaris is bolt in although it is a little lighter duty and requires the Yaris axles that it should otherwise fit without modification. I'm in a real right here and really need your expertise. Please forgive the hijack. It just looks like a good active thread.
Thanks in advance.
Thanks in advance.
You'd be better off starting a new thread (mods, can you move the post?) so that the info doesn't get diluted. Yes, this is a very active community and this thread in particular has been hot over the last year. ;)Originally Posted by jimmykicker ↑Ok. This is a hijack but guys I am stuck! I have a Scion xD 5 speed and the transmission has given up the ghost. Replacement transmissions are incredibly expensive or impossible to source. I have been chatting with a fella that said that the Yaris is bolt in although it is a little lighter duty and requires the Yaris axles that it should otherwise fit without modification. I'm in a real right here and really need your expertise. Please forgive the hijack. It just looks like a good active thread.
Thanks in advance.
That said... Do you know what is specifically wrong with it? The only difference internally that I'm aware of is the differential and ring gear. If it's the synchros or one of the gear sets, you can (I'm 99% sure) use a Yaris as a donor for parts. If you swap the whole gearbox, you will indeed have to use Yaris axles, but that puts you in the bind of having to swap hubs and brakes--not something for the timid. You might be able to use the inboard stubs from the Yaris with the xD shafts, but that's uncharted territory.
Honestly I would just fix your trans, these gearboxes are simple. (Heading over to thread to comment)
UPDATE:
Our first autocross test day was a success, the car is so quick now!!
https://youtu.be/eniW1ZNv20k
Our first autocross test day was a success, the car is so quick now!!
https://youtu.be/eniW1ZNv20k
The production value / editing in your vids has consistently improved; nice job.
Are you running as E Prep, or is that for SCCA club racing with E Production?
EP Because the car has no interior. I regret removing it but after 10 years of daily driving with kids, it was pretty trashed. Plus with it gone the cage install will be easier
I can't find the part in EP that allows engine replacement. =P
Yeah....I just got a message about that on FB.....even though I asked several people I guess it's still not correct....but it's arguable because it's a Toyota engine....If I must put it to XP that's fine too.
I think it would just be E Mod. /iono
Ok. So after discussing the classes with other seasoned veterans, We are going with XP
Lol, can you even get trophy points for that? :DOriginally Posted by ArmstrongRacing ↑Ok. So after discussing the classes with other seasoned veterans, We are going with XP
I'm more of a Mac guy but I've found Windows 7 is a pretty good upgrade from XPOriginally Posted by ArmstrongRacing ↑Ok. So after discussing the classes with other seasoned veterans, We are going with XP
😆Originally Posted by Bluevitz-rs ↑I'm more of a Mac guy but I've found Windows 7 is a pretty good upgrade from XP
Depending on what tires you are using you have the option of the local classes, like SU in San Diego and CSM/CST with Cal Club.Originally Posted by ArmstrongRacing ↑Ok. So after discussing the classes with other seasoned veterans, We are going with XP
Buahahaha good one.Originally Posted by Bluevitz-rs ↑I'm more of a Mac guy but I've found Windows 7 is a pretty good upgrade from XP
Classing for autocross at this point seems a bit rediculous. Some say I should be in Emod, witch contains sub 2000lb cars with tons of horsepower...But if we look at my car it's still running Focus ST times....it's weird
What did you guys think of the exhaust sound? That's the RPM long tube header
Great editing Tom, really coming along with the videos. And solid choice in background music, who was that btw, it was a good tune?
Thanks man! My wife does the editing now, she has the vision for what YouTube videos should be. I was terrible at if if you look far enough back haha. All of the audio we use is supplied by YouTube and it's free! This sound track was called "Foundation"
Very nice.
I signed up for Toyotafest today! Hope to see you guys there
Awesome! Dabbu, @rohvitz (from Instagram) and myself are all registered. There's a post in the California section.Originally Posted by ArmstrongRacing ↑I signed up for Toyotafest today! Hope to see you guys there
Looking forward to seeing you, and your beast of a Vios there, man.
Awesome! I hope they put us all together. This is gonna be fun!
From what I've been told by @rohvitz (who also entered last year), they do group models together.Originally Posted by ArmstrongRacing ↑Awesome! I hope they put us all together. This is gonna be fun!
We'll be on Yaris row!
Hope you guys get enough cars to be in your own section
Wow maybe we will have awards for best Yaris this time and the Priuses can go pound sand!
Don't hope, come down and join us 😁Originally Posted by ezhacker1 ↑Hope you guys get enough cars to be in your own section