Replies continued
4/20 NEVER FORGETPortland, OR · Mar 2, 2013#401I'm waiting to dyno mine until I get my exhaust finished and get a second bung for a wideband installed. Ill hopefully get it done this week, so the dyno will happen sometime after that.
I can say, after driving more, it's definitely improved power around 3-5k rpms. (I have a tach now) I drive some hilly roads regularly and the car pulls more easily up hills than it did before in 3rd and 4th gear. My butt-dyno feels it, it's funner to drive than before so I'm intersted to see what the dyno says.
3cyltrboOttawa · Mar 3, 2013#402 Originally Posted by
cali yaris ↑ 4 installs have been posted so far. All positive feedback. Is there a question I can answer for you?
Thanks Garm,
I guess I want to hear that it will make my life better ( I know thats unreasonable) and re-invent my car. Its alot of money, other than my coilovers and my assorted wheels and tires, its the second most that I would have spent on the car for 1 item and its hard to rationalize to myself for only 1 mod.
I've got a 1zz TB and the plastic intake spacer that you sell, both just waiting for this intake.
I'll get there eventually
When do more come in?
Will
1.5Tampa · Mar 7, 2013#403I think mine should be approaching the end of it's finishing process!!!
cali yarisThread starterCanoga Park, CA · Mar 9, 2013#404^ Yes it should! And a few more new ones are going to be shipped next week as well! 👍
jRossIndianapolis, IN · Mar 11, 2013#405So this thing is just bolt off, bolt on? I'm definitely considering this mod in the future.
1.5Tampa · Mar 11, 2013#406Yes this would be considered "bolt on."
cali yarisThread starterCanoga Park, CA · Mar 11, 2013#407100% bolt on, and it's a complete kit that includes all the hardware you need for a perfect installation. It will even connect to your stock airbox. 👍
mazillaSan Jacinto California · Apr 11, 2013#408In...not as easy as I would have liked but that's because I have an aftermarket hood and a Mishimoto XB radiator. I was able to chop up my old hose which was great, saved me a few bucks. I did have to cut and reshape/weld the hood latch point on the MI carbon hood, the shape was off from OEM to begin with(this one a large square shape), it wasn't an issue until I had to route the coolant line. The bar was pinching the upper hose shut against the manifold. I just cut a 45 degree piece off, hammered/ground it a little and welded it flipped over, cleaned up the welds and hit it with some rattle can.
Picture not included in this copy
Picture not included in this copy
3cyltrboOttawa · Apr 12, 2013#409And?
how does it feel
GolddeenohColumbia, SC · Apr 12, 2013#410like cold metal, how else would it feel? :P
cali yarisThread starterCanoga Park, CA · Apr 12, 2013#411LOL
1.5Tampa · Apr 12, 2013#412 Originally Posted by
Golddeenoh ↑ like cold metal, how else would it feel? :P
Smart ass lol
mazillaSan Jacinto California · Apr 12, 2013#413It feels like...like, warm apple pie.
Haha, sorry forgot to update here as well.
OK, so after a few hours of straight driving in every traffic condition available in one day I have to reccommend this part. It's fantastic, response is improved and the sound is tasty.
I dirted an LTZ about 30 minutes ago, he couldn't hang in the turns or overtake flat out in the open. I waved him past after a couple of minutes since I don't need any tickets. 😉
I get a nice audible chirp from the intake(even with the windows down at speed)...sounds like a quiet BOV, I love it.
I swear it's improved drivability with the clutch/flywheel/pullies, I was getting some chatter if not carefull on slow starts...maybe I'm trippin but I didn't have that problem today unless I really tried to make it happen.I'll wait a few days before officially making that call.
Go and buy it.
YarisSedanCalifornia - Bay Area · Apr 12, 2013#414Any MPG increase or decrease with this, I am watching this thread this is up high on my upcoming list of mods.
GTBakerCanada · Apr 12, 2013#415 Originally Posted by
tooter ↑ Yeah, they can get pricey. I paid the full going price for a used one on ebay that was in really superb condition.
Picture not included in this copy It was $125 including shipping. They had cheaper ones but some of them look like they were underwarer salvage! 😆
Is the TB a direct bolt on?
cali yarisThread starterCanoga Park, CA · Apr 12, 2013#416^ Yes
mazillaSan Jacinto California · Apr 12, 2013#417 Originally Posted by
YarisSedan ↑ Any MPG increase or decrease with this, I am watching this thread this is up high on my upcoming list of mods.
I couldn't tell you, I don't watch the MPG, I care only for RPM and MPH. ;)
1.5Tampa · Apr 13, 2013#418That sounds like it should be a quote from F&F lol
thefallsSunny place · Apr 13, 2013#419This is really good news. Has anyone tested this in force induction?
tooterLos Angeles · Apr 13, 2013#420 Originally Posted by
GTBaker ↑ Is the TB a direct bolt on?
Yes it is. The stud pattern for both is 60mm square. A 1ZZ throttle body will
really make the MI manifold shine! 👍
Picture not included in this copy cali yarisThread starterCanoga Park, CA · Apr 13, 2013#421thanks tooter 🙂
why?harnett county NC · Apr 13, 2013#422i bet it tastes just like chicken.
I am also guessing the 1zz throttle body will only hurt gas mileage.
4/20 NEVER FORGETPortland, OR · Apr 13, 2013#423My MPG decreased to about 27 city/35 highway since the 1ZZ TB and MI manifold install. I think the decrease is a product of me running the car up to redline a lot and generally beating on it A LOT more than I used too. There is this lump of power around 3500-4000 RPMs so I generally drive the car in that rev range and above all of the time.
why?harnett county NC · Apr 13, 2013#424 Originally Posted by
4/20 NEVER FORGET ↑ My MPG decreased to about 27 city/35 highway since the 1ZZ TB and MI manifold install. I think the decrease is a product of me running the car up to redline a lot and generally beating on it A LOT more than I used too. There is this lump of power around 3500-4000 RPMs so I generally drive the car in that rev range and above all of the time.
So funny. So driving the crap out of the car you still get better gas mileage than the majority of vehicles on the road. Awesome.
mazillaSan Jacinto California · Apr 13, 2013#425 Originally Posted by
why? ↑ So funny. So driving the crap out of the car you still get better gas mileage than the majority of vehicles on the road. Awesome.
Yes, which is exactly why I don't give a crap about MPG...worst case and we still get better mileage than most.
tooterLos Angeles · Apr 14, 2013#426 Originally Posted by
why? ↑ I am also guessing the 1zz throttle body will only hurt gas mileage.
Running a 1ZZ does make it easier to reduce your gas mileage because with a larger bore it takes a lot less gas pedal movement to meter more air into the engine. Driving with a light foot has kept my mileage the same as the 1NZ.
tooterLos Angeles · Apr 14, 2013#427 Originally Posted by
cali yaris ↑ thanks tooter 🙂
Any time, Garm. 🙂
When performance enhancing parts are combined,
you don't just get 2+3=5... you get 2x3=6. 👍
B2FiNiTYUS · Apr 14, 2013#428 Originally Posted by
4/20 NEVER FORGET ↑ My MPG decreased to about 27 city/35 highway since the 1ZZ TB and MI manifold install. I think the decrease is a product of me running the car up to redline a lot and generally beating on it A LOT more than I used too. There is this lump of power around 3500-4000 RPMs so I generally drive the car in that rev range and above all of the time.
have you tuned it yet? that could be a big reason
4/20 NEVER FORGETPortland, OR · Apr 14, 2013#429 Originally Posted by
B2FiNiTY ↑ have you tuned it yet? that could be a big reason
Not yet, and it will be a while. I am still trying to find someone who will make an exhaust for me. I want to take out one of the cats and no shop around here will do that. Since I don't have the hook-up anywhere I am stuck waiting for this guy at work who offered to help me out, but he can't get to it for another month or two at least.
The plan is to get the exhaust finished, an o2 bung installed so I can get a wideband, then get an AEM FIC. That is bottom of the list though as I need to get a new driver's seat (currently using a old ratty Corbeau Forza) and a set of tires. First the needs, then the wants.
Captain SlowScott, LA · Apr 17, 2013#430do we still have no dyno numbers from someone running this in combination with some other mods?
cali yarisThread starterCanoga Park, CA · Apr 17, 2013#431Not everyone has the additional money and/or time and/or access to a shop to dyno the car.
YodaFL · Apr 17, 2013#432 Originally Posted by
Captain Slow ↑ do we still have no dyno numbers from someone running this in combination with some other mods?
You could be that some one
xnamerxxso cal · Apr 17, 2013#433LOL if someone in the socal area is willing to pay for and let me borrow an intake I can demonstrate what it'll do with a proper header 😛
cali yarisThread starterCanoga Park, CA · Apr 18, 2013#434^ I wish we had a "loaner" manifold for this purpose, but we have to ship every one that comes in until we catch up with orders.
cali yarisThread starterCanoga Park, CA · Apr 18, 2013#435Anyone want candy? 😁
Picture not included in this copy
cali yarisThread starterCanoga Park, CA · Apr 18, 2013#436How about some polishing? 😁
Picture not included in this copy
DJYojimboChicago · Apr 18, 2013#437how much for just the additional polishing or "candy" both look really nice :)
DJYojimboChicago · Apr 18, 2013#438nevermind garm just saw it on the website
why?harnett county NC · Apr 18, 2013#439 Originally Posted by
cali yaris ↑ Anyone want candy? 😁
Picture not included in this copy
That one is wonderful. Is it the absolute red, or just a random red color? I need to save my pennies.
Speaking of dynos, I wish there was one in my area that I could trust. And no, I am not trusting a dyno that specializes in Mustangs. That one is 45 minutes away. The nearest one that deals with imports is 2 hours away. So annoying.
mazillaSan Jacinto California · Apr 19, 2013#440I've been slammed or else I would have gotten the dyno done by now. I'll try to remember to at least find somebody local if I can't make it up near MI for the comparison. By the time I'm done with work and whatnot it's past closing time.
mr_milesPortland, OR · Apr 19, 2013#441What. You all expected it. It will eventually come out of the car and get either OD green or black sand pearl to match the body. Could happen as early as tomorrow if the weather holds up.
Picture not included in this copy (confirmed fitment on 2013)
gotta do the chip swap on my 1zz TB. it's rev searching >_> once I get my idle issue solved, i'll go investigate the possibilities of a dyno. I think I've got enough little mods to warranty not being stock :p
Captain SlowScott, LA · Apr 19, 2013#442Just figured this being such a sought after mod that someone would run out and dyno it with their other mods.
I'll gladly install it and pay for a dyno if the manifold is free :) I just don't have $700 for a part right now, especially when I don't know what the gains will really be with some aftermarket I/H/E.
cali yarisThread starterCanoga Park, CA · Apr 19, 2013#443@ miles: way to go!
@ captain. LOL. Yeah. Free. Not. I'm sure more dynos will roll in as time goes by. Hopefully yours will be one of them. 🙂
thebarberGrand Rapids, MI · Apr 20, 2013#444if i still had my yaris it'd be on and dyno'd by now ;)
mazillaSan Jacinto California · Apr 20, 2013#445Can anybody recommend a place in San Diego, or suggest a particular brand/type/etc dyno shop I should be looking for(maybe a YW "standard" for example) to get similar dyno machines at least...if that matters at all?
Jeff@MicroImageSFV, CA · Apr 22, 2013#446mazillaSan Jacinto California · Apr 23, 2013#447 Originally Posted by
Jeff@MicroImage ↑
I went through those, one is well known(the dyno shop), a couple are not dyno's, one is like 25 miles away and another who knows where.
I was more looking for suggestions on dyno type in case there has been a trend as to what dyno make/model people on this forum use...trying to nail down a little consistency if possible. Otherwise I'll just start calling around and go with the cheapest.
tooterLos Angeles · Apr 23, 2013#448 Originally Posted by
mazilla ↑ I was more looking for suggestions on dyno type in case there has been a trend as to what dyno make/model people on this forum use...trying to nail down a little consistency if possible. Otherwise I'll just start calling around and go with the cheapest.
I made all my runs on a Dynojet dyno. 👍
I like the Dynojet graphs because they're numerically specific, and not vague like other graphs where you're left guessing at what the gains might be.
xnamerxxso cal · Apr 23, 2013#449Go with Church's, at least you'll be able to directly compare with 2 other Yarii who are making some good NA numbers.
cali yarisThread starterCanoga Park, CA · Apr 23, 2013#450^ good point, or KT Motors in the Valley here where we did our own dynos on the test car.
There are at least three or four other dynos within five miles as well.