LOL, you already asked that, and I already answered. 😁
Micro Image Intake Manifold thread
467 posts · 153,219 views · page 2 of 10
Replies continued
Forget about colors, you need to put a thermal coating on that thing that is sitting right behind the radiator. However, these days you can get all kinds of nice finishes, even colors. 😎
http://www.jet-hot.com/coatings/jet-hot-extreme-1300/
For those that don't want to likely double the cost of the manifold with a pro coating, you can wrap it.
http://www.designengineering.com/cat...ials/cool-tape
http://www.jet-hot.com/coatings/jet-hot-extreme-1300/
For those that don't want to likely double the cost of the manifold with a pro coating, you can wrap it.
http://www.designengineering.com/cat...ials/cool-tape
^ Good idea. Ceramic silver is about $100 to coat it locally.
Even after a long idle, the plenum was room temperature -- the longer runners are helping. Also, this was installed without the the thermal manifold spacer. I'd like to experiment with that as well.
Even after a long idle, the plenum was room temperature -- the longer runners are helping. Also, this was installed without the the thermal manifold spacer. I'd like to experiment with that as well.
WOW, that is a great price on coating.Originally Posted by cali yaris ↑^ Good idea. Ceramic silver is about $100 to coat it locally.
Even after a long idle, the plenum was room temperature -- the longer runners are helping. Also, this was installed without the the thermal manifold spacer. I'd like to experiment with that as well.
Hope you get the results you are looking for. 👍
I seriously can't wait to buy one. I haven't been this excited about something on this forum ever. Keep us updated!
^ I like the coating results so far. Here is another motor I'm building.
I used to use Jet Hot (the actual brand name) and ship stuff out, but I get the same results from the local coater.
Picture not included in this copy
I used to use Jet Hot (the actual brand name) and ship stuff out, but I get the same results from the local coater.
Picture not included in this copy
That must have taken some real self control for you... Knowing that Jet Hot offers its coatings in green. 😆
Originally Posted by cali yaris ↑^ I like the coating results so far. Here is another motor I'm building.
I used to use Jet Hot (the actual brand name) and ship stuff out, but I get the same results from the local coater.
Picture not included in this copy
This is a great product. Looks the part!!!
Awaiting the results impatiently.
And the question is,how can it fit in here? :)
Picture not included in this copy
Awaiting the results impatiently.
And the question is,how can it fit in here? :)
Picture not included in this copy
Dont have a picture of my own engine bay,but this is the same engine and intercooler piping.
That must have taken some real self control for you... Knowing that Jet Hot offers its coatings in green.I've re-invented myself - now I'm all business, baby. 😆
Picture not included in this copy
what is that engine ??Originally Posted by cali yaris ↑^ I like the coating results so far. Here is another motor I'm building.
I used to use Jet Hot (the actual brand name) and ship stuff out, but I get the same results from the local coater.
Picture not included in this copy
I have the same engine stand 😁
Looks like an engine from a datsun 510.
Red is no problem, the problem is choosing which red 😛Originally Posted by Golddeenoh ↑👍
😆
just so everyone knows, I want a red one, and you said you would make it. :D 👍
We have several options for coatings, including but not limited to:
red anodizing (several shades from bright to dark)
red powdercoating (10+ color choices including glossy, candy, pearl, semi-gloss, matte, etc..)
red high heat wrinkle or flat powder coat
red thermal coating
We have flanges for 1NZFE Echo/xB/xA already, as well as for aftermarket larger bore throttle bodies. Just need to specify at time of order.Originally Posted by Bluevitz-rs ↑Is there going to be a 3 bolt TB option? Is it at all possible to make the mounting flange universal to fit either TB?
U20 going into 1969 Datsun RoadsterOriginally Posted by xnamerxx ↑Looks like an engine from a datsun 510.
Thats an awfully large collector for that motor...its going to shift the torque curve upwards thru the roof
Picture not included in this copyOriginally Posted by Jeff@MicroImage ↑Red is no problem, the problem is choosing which red 😛
We have several options for coatings, including but not limited to:
red anodizing (several shades from bright to dark)
red powdercoating (10+ color choices including glossy, candy, pearl, semi-gloss, matte, etc..)
red high heat wrinkle or flat powder coat
red thermal coating
Either as close to the body color as possible or as close to the Tanbe strut tower brace and AEM CAI. (I have put the rest of the Radiator hoses on since this photo and added the Grounding kit)
Thats an awfully large collector for that motor...its going to shift the torque curve upwards thru the roofnot that much, the runners are super long and the motor has a lot of torque. The U20 revs to 7000+ easily. It's in the car now, getting tweaked and tuned.
you need some red vacuum hoses! :-)Originally Posted by Golddeenoh ↑Picture not included in this copy
Either as close to the body color as possible or as close to the Tanbe strut tower brace and AEM CAI. (I have put the rest of the Radiator hoses on since this photo and added the Grounding kit)
looks great btw...
Red anodizing will match the Tanabe and AEM pieces
Red Powdercoat will match the body color and rad hoses better
We'll quote you on both options when it comes time to order.
Red Powdercoat will match the body color and rad hoses better
We'll quote you on both options when it comes time to order.
bump. 200+ miles, no problems so far.
{{{{ DYNO NEXT THURSDAY }}}}
{{{{ DYNO NEXT THURSDAY }}}}
Hope it's cool that day! 🙂
Try for first thing in the morning. My day ended up being be fairly hot at 88 degrees.
Try for first thing in the morning. My day ended up being be fairly hot at 88 degrees.
^ We'll be dyno-ing with and without the manifold during the same session (and possibly with the 1ZZ throttle body as well), so it won't matter what the temperature is in order to compare differences.
how will you overcome the "learn" function for both dyno pulls?
Or will you simply reset the ecu before each pull?
Or will you simply reset the ecu before each pull?
^ At WOT it won't matter, there isn't any ECU "learning" in open loop.
It does learn your "style" etc. for regular driving/partial throttle/cruising; that's what we've been testing this week.
It does learn your "style" etc. for regular driving/partial throttle/cruising; that's what we've been testing this week.
oh ok :)
looks great ;)
it is 2" inches isn't it ??
... waiting for the dyno
it is 2" inches isn't it ??
... waiting for the dyno
That's what she said.Originally Posted by Jack Yak ↑it is 2" inches isn't it ??
Will this fit with the aFe intake? $$?
^ We don't know the price yet, and we haven't tested it with any aftermarket intakes. What you see in the thread is everything we know and have done so far.
If the dyno shows some power gains, we will further refine the design if we can to fit the stock or aftermarket intakes to the manifold.
If the dyno shows some power gains, we will further refine the design if we can to fit the stock or aftermarket intakes to the manifold.
Those J Bend tubes are super sexy. sure beat the plastic composite look.
I'd buy it even if I had to modify the factory/aftermarket intake. Maybe include a intake with a diameter tube that matches the 1zz tb with a mount for the MAF sensor? Eagerly awaiting this to go up for sale.
^ Good ideas. Dyno session is Thursday, after that we'll figure out what we're doing next.
What is it with these intale manifolds all being dyno'd on thursdays???!!!
Because it's the best day. 🤣
good luck Garm
ill be waiting for thursday results cant wait!!!
👏
👏
2 DAYS!!!
I wonder if changing the intake manifold gasket to a non-metal material would help? More metal (compared to the plastic manifold) could translate to some heat soak?
If I understand intake properly, you'd want more heat soak. Intake air temps you want to be lower, exhaust should be warmer. Heating the intake temps will rob some of the power (hence why cold-air intakes provide more power over short-ram and OEM)
Anyone feel free to correct me if I'm wrong.
:EDIT:
Completely misread, and didn't notice the "gasket" portion of what was said. Thought you meant the ENTIRE manifold...
I'll go back to my corner now
Anyone feel free to correct me if I'm wrong.
:EDIT:
Completely misread, and didn't notice the "gasket" portion of what was said. Thought you meant the ENTIRE manifold...
I'll go back to my corner now
I do believe that it would... 🙂Originally Posted by baseballfan416 ↑I wonder if changing the intake manifold gasket to a non-metal material would help? More metal (compared to the plastic manifold) could translate to some heat soak?
I did the dyno runs without it and the manifold was blazing hot. That big one inch thick slab of aluminium "heatsink" laying across the intake ports transfers engine heat like crazy. I'm going to get longer bolts to put the insulating gasket on.
^ The manifold will get pretty hot from regular driving, especially stop and go, or "around town". Once you are moving pretty well, the longer runners will help protect against too much heat transfer.
The insulator/spacer might help a little. I'm not sure we'll be able to test one on the dyno though.
The insulator/spacer might help a little. I'm not sure we'll be able to test one on the dyno though.
DAMN. is it Thursday yet?
Get 'er done, Garm!
Get 'er done, Garm!
I could see a switch keeping the rad fan on all the time helping out a bit too, but yes, you want the intake air temps cold.
Wouldn't blowing hot air from the radiator be detrimental? Or are you (Viperoni) assuming that the radiator will be cooler than the manifold?
At any rate, some sort of wrapping or heat shielding would definitely seem to be in order as well as a phenolic spacer. Heat soak and weight are the two main reasons most OEM intake manifolds are made of a plastic material now (miles per gallon and tailpipe emissions).
At any rate, some sort of wrapping or heat shielding would definitely seem to be in order as well as a phenolic spacer. Heat soak and weight are the two main reasons most OEM intake manifolds are made of a plastic material now (miles per gallon and tailpipe emissions).
I'm only speaking from experience with honda's. Granted... a bone stock k20a2 (rsx-s) makes roughly 160whp, so in effect, it may be a magnified effect.
http://hondata.com/heatshieldgasket.html
The problem I see is that these metal manifolds increase heat soak (regardless of the mechanism by which it occurs)...
http://shop.microimageonline.com/The...GE-tig-1nz.htm
Wouldn't a product like the above potentially mitigate that heat soak? I almost wonder if tooter's manifold project could have realized better gains via the use of something like this.
http://hondata.com/heatshieldgasket.html
The problem I see is that these metal manifolds increase heat soak (regardless of the mechanism by which it occurs)...
http://shop.microimageonline.com/The...GE-tig-1nz.htm
Wouldn't a product like the above potentially mitigate that heat soak? I almost wonder if tooter's manifold project could have realized better gains via the use of something like this.
today's the day!
Yes! Any Expectations?
^ None. Just curious, like everyone else. 🙂
The anticipation is KILLING me! Hurry up and be done!