Man, he just keeps up with the shitstorming. I should post the story of the crap he just pulled on my friend. Gotta love T B R and his crappy attempts to rip everyone off!
Micro Image Intake Manifold thread
467 posts · 153,219 views · page 7 of 10
Replies continued
Now that you mention it, yes it does look familiar. 🙂Originally Posted by cali yaris ↑^ It doesn't belong to GE. I took that picture at my shop of product IN STOCK.
Surely you recognize my pavement, it's the same background for many, many of my product photographs. 🙂
I just couldn't believe that anyone would actually swipe your pic and fraudulently use it for the false appearance of having those manifolds when they didn't.
Greg
I have written confirmation from Golden Eagle now that they did not make an account here, nor did they post over the weekend. (They were at a show/race event).
ToyBox Racing was impersonating them with a fraudulent account. Wow.
Mods, please clean up the thread.
ToyBox Racing was impersonating them with a fraudulent account. Wow.
Mods, please clean up the thread.
makes me sick to my stomach.
wooooooow they really would go to that step lmao
Unbelievable. If true, this just makes TBR look even more like a couple of chuckle head kids running a business out of their mom's basement. They did take down the image (the MI pic) and thread about the "TBR" manifold in the last 12 hours. What a way to operate. 👎Originally Posted by cali yaris ↑I have written confirmation from Golden Eagle now that they did not make an account here, nor did they post over the weekend. (They were at a show/race event).
ToyBox Racing was impersonating them with a fraudulent account. Wow.
Mods, please clean up the thread.
It really is a shame they act that way... Seems like they have the resources to do some cool stuff, but they just cant help but get in the way of their own success.
Golden Eagle should yank TBR's vendor status because they don't deserve it. And if they do lose it, the irony is that they poisoned the business relationship with their own deceit.
^ I don't think they have vendor status, tooter.
haha
How can they sell Golden Eagle manifolds without being one of their vendors? Unless they actually can't and were just claiming that they could.
At this point I wouldn't put anything past them.😆
At this point I wouldn't put anything past them.😆
I searched "manifold" on their website and I see this...
Sorry but I can't find the page you're looking for...Let me help you find what you came here for:
Were you looking for one of the following posts?
1NZ-FE Pro Racing Valves
TBR Radiator Combo Kit
TBR 1NZ-FE ITBs Are Here!
Loaded xA
Our New Website
Hello world!
If not, don't worry, I've got a few more tips for you to find it:
... but I dont ever remember seeing it on their actual site maybe they only posted it to FB
Sorry but I can't find the page you're looking for...Let me help you find what you came here for:
Were you looking for one of the following posts?
1NZ-FE Pro Racing Valves
TBR Radiator Combo Kit
TBR 1NZ-FE ITBs Are Here!
Loaded xA
Our New Website
Hello world!
If not, don't worry, I've got a few more tips for you to find it:
... but I dont ever remember seeing it on their actual site maybe they only posted it to FB
They took it down... however the evidence is still there on Google... 😉
About 6,580 results (0.33 seconds)
Search Results
About 6,580 results (0.33 seconds)
Search Results
Toy Box Racing - Lawrenceville, GA - Automotive | Facebook
www.facebook.com/ToyBoxRacingCached
You +1'd this publicly. Undo
Toy Box Racing · Thursday. Want a Golden Eagle intake manifold for your Yaris, Vitz, Xb or xa ? Call us we will beat any price offered by Micro Image.
You visited this page on 2/10/13.
Garm... be sure to copy this before it disappears, because it won't be there for long. 😉
Yeah so they posted it to FB only lol
Unless they actually can't and were just claiming that they could.Correct.
It's been forever that i've bought upgrades for my yaris, but Garm was the only person I would shop with, and the absolute best in customer service in working with people. I wish that I was financially at the same place those years ago that I am now, because I would've pimped the yaris out so much more, lol. Priorities changed for me though after 2 kids, but I still love reading about all the awesome advances Garm continues to push for our great car!
^ ha, great to see you on here. ...ooh, 2 kids will do that for sure! But that is a much more precious experience than modding a car.
You can return to it when they are in school, or old enough to hold a wrench -- whichever comes first. 😆
You can return to it when they are in school, or old enough to hold a wrench -- whichever comes first. 😆
Its really one guy that's the problem from what I can tell. Kinda passive aggressive in nature. 😁Originally Posted by Jason@SportsCar ↑Unbelievable. If true, this just makes TBR look even more like a couple of chuckle head kids running a business out of their mom's basement. They did take down the image (the MI pic) and thread about the "TBR" manifold in the last 12 hours. What a way to operate. 👎
It really is a shame they act that way... Seems like they have the resources to do some cool stuff, but they just cant help but get in the way of their own success.
Wow tbr.
Give it up. Your just looking like an even bigger tool bag each and everytime
Give it up. Your just looking like an even bigger tool bag each and everytime
I'm a firm believer of what goes around comes around....kinda from my hockey player days of standing toe to toe. I was only knocked out three times in one season. Pretty lame existance having to steal someone else's ID.
Norcal's official walkin', talkin', Micro Image movin' billboard.
Norcal's official walkin', talkin', Micro Image movin' billboard.
I suggest everyone ignore this tool from now on, and immediately report any suspected posters to the mods. This behavior makes me absolutely sick. TBR has been the biggest TOS violator in my 5 years with Yarisworld and this was totally out of line on so many levels.
Garm, is there any way to take legal action against TBR for harrassment, lies, forgery, impersonation? I would be happy to provide any of TBRs posts and IP addresses used! 😠
Garm, is there any way to take legal action against TBR for harrassment, lies, forgery, impersonation? I would be happy to provide any of TBRs posts and IP addresses used! 😠
Toy Box Racing looks like nothing but hacks....
i considered a few things for an n/a build but now no chance, id rather the car stay almost stock....
i considered a few things for an n/a build but now no chance, id rather the car stay almost stock....
I have documented most of it. For this incident, it would be Golden Eagle's move.
Best to be vigilant and also be thankful we still have Mods here who care about the community. I know I am, and I am not saying that as a business.
Best to be vigilant and also be thankful we still have Mods here who care about the community. I know I am, and I am not saying that as a business.
It's here! 😁
Picture not included in this copy
I should have time to install it and my 1zz throttle body on Friday.
Also, a shot of the inside of the plenum. Those are some nice ramps leading into each runner!
Picture not included in this copy
By the way, what's all of this hardware that came with the manifold for? I imagine it's pretty easy to figure out once I have everything apart but I figured I'd ask.
👍
Picture not included in this copy
I should have time to install it and my 1zz throttle body on Friday.
Also, a shot of the inside of the plenum. Those are some nice ramps leading into each runner!
Picture not included in this copy
By the way, what's all of this hardware that came with the manifold for? I imagine it's pretty easy to figure out once I have everything apart but I figured I'd ask.
👍
NPT plugs are for the threaded holes in the bottom of the manifold
10" PCV hose is to replace the short factory hose from the head to the manifold (this will be easy to identify when installing, it routes to the middle spout on the manifold)
The two outer spouts will re-use the factory hoses.
The two bolts, spacers and washers are used to space the radiator hose bracket away from the first intake runner. Let us know if any of this is unclear.
10" PCV hose is to replace the short factory hose from the head to the manifold (this will be easy to identify when installing, it routes to the middle spout on the manifold)
The two outer spouts will re-use the factory hoses.
The two bolts, spacers and washers are used to space the radiator hose bracket away from the first intake runner. Let us know if any of this is unclear.
We have some of the same days off - We should meet up and I'll help you install it! (PM me if that's something you want to do) :)
Mr Miles: I'll be working on it most of the day Friday at a friend's place, I'll PM you my number and if you're interested in coming out and taking a look or helping out, it shouldn't be an issue.
I have a question about the thermal gasket, do you install it directly against the head or does there need to be a o-ring gasket between the head and the thermal gasket? From the reading online it looks like I shouldn't need one but I thought I'd ask first.
I have a question about the thermal gasket, do you install it directly against the head or does there need to be a o-ring gasket between the head and the thermal gasket? From the reading online it looks like I shouldn't need one but I thought I'd ask first.
^ No, the O-ring goes in the manifold groove (or O-rings on the new mani), the head surface is flat I believe.
Those really smooth velocity stacks are beautiful work. 🙇Originally Posted by 4/20 NEVER FORGET ↑It's here! 😁
Also, a shot of the inside of the plenum. Those are some nice ramps leading into each runner!
Picture not included in this copy
Those grinding marks inside the runner throats are necessary. It's a real challenge welding thin aluminium tubing onto thick aluminium parts without getting at least some burn through. I had exactly the same issue. The ports clean up nice and easy with a grinder and there's plenty of material there so weld strength is not compromised. 👍
There's three approaches, one is a smooth flush recesses like yours, another is smooth raised ramps...
Picture not included in this copy
and a third is where the stack protrudes into the plenum...
Picture not included in this copy
^ Thanks, that just about covers it. 🙂 Some roughness on the intake side is acceptable, it's smoothness on the exhaust side that is important.
Ok cool. I figured I'd still need the Orings on the manifold, I was just wondering about between the thermal gasket and the head. It looks like people are just installing them flat against the head. Thanks!
Wow! That unit is sooooo much nicer than the Weapon R manifold. Quality pieces are well worth the wait.
Yes. That slight roughness is negligible and purely cosmetic. Mine needed grinding exactly the same way.Originally Posted by cali yaris ↑^ Thanks, that just about covers it. 🙂 Some roughness on the intake side is acceptable, it's smoothness on the exhaust side that is important.
Got mine installed and oh by the way...FS stock intake manifold for Yaris.
2 attachments not included in this copy
Damn sharp Skeck, both inside and out!
Thanks man!
Looks great! Pretty sure you're the second automatic to run one and at least one other is running the Injen CAI, looking forward to your feedback after some more driving :)
I can't remeber, do you change over the electronics with the 1zz Throttle body or do you just plug and go faster?
I swapped the electronics myself.
Gooks super, sheck! 👍
Have you driven it yet? And did you need to turn down the 1ZZ idle screw?
Have you driven it yet? And did you need to turn down the 1ZZ idle screw?
Drove to car wash and back but no freeway yet...due to rush hour...No I didn't adjust idle screw. I actually installed the throttle body about 6 months ago or so
If you installed the 1ZZ 6 months ago and aren't complaining... then it didn't need to be turned down. 👍 So how does the car drive? Do you notice any difference?
Okay, So I just got done with my first freeway test...and OH MY! The mid and even high range pull is amazing...definitely a noticeable difference...Before I knew it I was up to 95 with ease and before this MOD it took WOT for a bit to get even close...For N/A folks All I have to say is BUY ONE!!! Now, keep in mind I have the following MODS as well... Throttle Body Swap, Weapon R Throttle Controller (Which I always keep on highest setting), Nitto Midpipe (Cat delete), DC Sports Exhaust, DC Headers, Injen CAI, Micro Image Crank Pulley and removed the following weight (Passenger Seat, 60/40Back Seat, Spare Tire Cover). I still need to get my Camcon tuned which is running in bypass mode right now, so I will keep everyone posted on dyno numbers when I get that done. But huge noticeable difference is what i have to say. I am still grinning ear to ear and I was literally laughing uncontrollably while I was driving. Again...BUY THIS!!!
That's good to hear. 🙂
I actually installed the throttle body about 6 months ago or soWhat manifold were you running the 1ZZ on before the MI manifold?
Stock
Awesomeeeeee. Any change in sound?
That's one reason you experienced so much improvement. 👍 The increased capacity of a 1ZZ throttle body isn't fully realized on a stock manifold.Originally Posted by skeck ↑Stock
Woo hoo!! It's alive!
I'm sure there is but because my car is already running a catless mid pipe and DC sports exhaust I'm not hearing much over those:)Originally Posted by 1.5 ↑Awesomeeeeee. Any change in sound?
Well, it's in the car 😁
Picture not included in this copy
I installed it earlier today with a 1ZZ throttle body. I was able to re-use my K&N typhoon intake but I had to buy a new coupler that doesn't reduce for the connection from the intake to the new throttle body. I had to buy a new coolant line to run to the throttle body because the lines are at a different angle from the 1NZ throttle body.
The install of the manifold itself was very easy. I also installed a Golden Eagle thermal gasket at the same time. I had to take off the hood latch mechanism to make it easier to slide the manifold into position easier, just an FYI.
Picture not included in this copy
As for the throttle body, based on what I read on here, I did not do a chip swap. My part number is ending in 030. After driving it around for a couple hours tonight, I think I am going to have to do a chip swap. On initial start up the idle would not stabilize, it would climb in RPMs then drop quickly, then climb and drop over and over until shut off. I remember tooter saying to back the screw out a turn so I did so and the idle stabilized but was still very high. After backing it out further I was able to get the idle to stabilize.
I took the car out for a drive. The change is noticeable. I normally drive the car in pretty low RPM range (I don't have a tach installed) and the power down low didn't change much. Once it starts to climb in revs, probably in the 3k RPM range, the car pulls stronger than before. 3rd gear around 45-50 mph and up is a LOT of fun. I'm quite interested to get this thing on a dyno once I get a bung for a wide-band installed into my exhaust.
Now, I need some advice on what to do about the throttle body. The car threw a check engine light each time I reset the ECU today, and I went and got it scanned at a autozone:
Picture not included in this copy
My guess is I need to do a chip swap. The car doesn't drive perfect. When I am coasting off of the throttle, say at 30mph (or any mph, doesn't matter), it doesn't matter if I barely touch the throttle or hammer the throttle, the car has a tiny "hiccup" feeling, as if the throttle was partly open then it closed and then opened. It's hard to describe. Also, when I am at partial throttle and I let off the throttle, it hangs for a second or two before closing and starting to decelerate. Is that normal? I know the car did it before, but it is far more pronounced now.
I also had some problems with high idle and idle hang, but I found that adjusting the throttle screw to a higher rpm idle has fixed it. I'm idling pretty high right now, probably around 1000-1200 rpm, but I haven't gotten a check engine light since I adjusted it this way (maybe 10 miles worth of driving where it would happen immediately before) so I think I am just going to leave it for now.
What do you guys think? I thought I had the right throttle body part number, but I'm thinking a chip swap is in my future.
As for the manifold, wow guys, it's a superb part. My friends who are all Honda guys were extremely impressed by the fit and build. The engine looks wonderful with it on there. If you're on the fence about getting one, it's a really well designed and built part. I can't wait to get this car to a dyno.
Picture not included in this copy
Sorry if my grammar sucks, I've been drinking. 🍻
Picture not included in this copy
I installed it earlier today with a 1ZZ throttle body. I was able to re-use my K&N typhoon intake but I had to buy a new coupler that doesn't reduce for the connection from the intake to the new throttle body. I had to buy a new coolant line to run to the throttle body because the lines are at a different angle from the 1NZ throttle body.
The install of the manifold itself was very easy. I also installed a Golden Eagle thermal gasket at the same time. I had to take off the hood latch mechanism to make it easier to slide the manifold into position easier, just an FYI.
Picture not included in this copy
As for the throttle body, based on what I read on here, I did not do a chip swap. My part number is ending in 030. After driving it around for a couple hours tonight, I think I am going to have to do a chip swap. On initial start up the idle would not stabilize, it would climb in RPMs then drop quickly, then climb and drop over and over until shut off. I remember tooter saying to back the screw out a turn so I did so and the idle stabilized but was still very high. After backing it out further I was able to get the idle to stabilize.
I took the car out for a drive. The change is noticeable. I normally drive the car in pretty low RPM range (I don't have a tach installed) and the power down low didn't change much. Once it starts to climb in revs, probably in the 3k RPM range, the car pulls stronger than before. 3rd gear around 45-50 mph and up is a LOT of fun. I'm quite interested to get this thing on a dyno once I get a bung for a wide-band installed into my exhaust.
Now, I need some advice on what to do about the throttle body. The car threw a check engine light each time I reset the ECU today, and I went and got it scanned at a autozone:
Picture not included in this copy
My guess is I need to do a chip swap. The car doesn't drive perfect. When I am coasting off of the throttle, say at 30mph (or any mph, doesn't matter), it doesn't matter if I barely touch the throttle or hammer the throttle, the car has a tiny "hiccup" feeling, as if the throttle was partly open then it closed and then opened. It's hard to describe. Also, when I am at partial throttle and I let off the throttle, it hangs for a second or two before closing and starting to decelerate. Is that normal? I know the car did it before, but it is far more pronounced now.
I also had some problems with high idle and idle hang, but I found that adjusting the throttle screw to a higher rpm idle has fixed it. I'm idling pretty high right now, probably around 1000-1200 rpm, but I haven't gotten a check engine light since I adjusted it this way (maybe 10 miles worth of driving where it would happen immediately before) so I think I am just going to leave it for now.
What do you guys think? I thought I had the right throttle body part number, but I'm thinking a chip swap is in my future.
As for the manifold, wow guys, it's a superb part. My friends who are all Honda guys were extremely impressed by the fit and build. The engine looks wonderful with it on there. If you're on the fence about getting one, it's a really well designed and built part. I can't wait to get this car to a dyno.
Picture not included in this copy
Sorry if my grammar sucks, I've been drinking. 🍻