Yarisworld Archive

STF posts

647 posts · 143,819 views · page 6 of 13

Replies continued

xnamerxxso cal · Feb 19, 2013#251
I can do a sat, but the tues night ones are difficult for me since I get off work so late🙁

Air temps were mid 70s for the toyos and 80 or so for the dunlops. This sight was asphalt with track temps in the 80s for the toyos ad 90s for the dunlops.
NJ DriveNorthern NJ · Feb 19, 2013#252
Originally Posted by xnamerxx ↑
I can do a sat, but the tues night ones are difficult for me since I get off work so late🙁

Air temps were mid 70s for the toyos and 80 or so for the dunlops. This sight was asphalt with track temps in the 80s for the toyos ad 90s for the dunlops.
Thanks Namer, great info and data. Our first test 'n tune is March 10 on a runway site but the rest are at the Meadowlands, which is smooth, perfect asphalt.
racerbLeland, NC · Feb 19, 2013#253
NJ Drive, I'm with you on this one, most tires I have run need a heat cycle and a shelf time before all out running/racing. I've only experimented with R-Compound tires for the most part, Yokos, Toyos, and Kumhos, but all needed a heat cycle and then about 24-48 hours down time before racing on them. Tires would also last much longer this way too! Not quite sure what to think of the current crop of 140+ tread wear rated Street and Touring tires, but I'm looking to go a slightly different direction than most around here. I'm more than likely going to run Federal 595RS-Rs in the 195/50/15 size, due to our much shorter/ tighter coarses, where gear plays the biggest part.

http://www.performanceplustire.com/t...95_SLASH_50-15

racerb 🤷
justjesusOrange County · Feb 19, 2013#254
i LOVE my RSRs. I haven't run them during competition in autoX, but have at Adams (go-kart track) and have posted decent times with those.

What I like about them more than anything? The price.
racerbLeland, NC · Feb 19, 2013#255
Originally Posted by justjesus ↑
i LOVE my RSRs. I haven't run them during competition in autoX, but have at Adams (go-kart track) and have posted decent times with those.

What I like about them more than anything? The price.
You got that right!!
ilikericeThread startersavannah, ga · Feb 20, 2013#256
Yea, I enjoyed my RSR alot too. Still debating if I should get new ones or try a different tire
NJ DriveNorthern NJ · Feb 21, 2013#257
Has anyone weighed their car in STF trim yet?
racerbLeland, NC · Feb 21, 2013#258
Originally Posted by NJ Drive ↑
Has anyone weighed their car in STF trim yet?
Mine is still very stock, so in other words heavy! My plan is to kinda go with the Andy Hollis weight lose plan, replace driver's seat, lighter exhaust, >13 pound wheels, and hopefully lighter suspension. But hey with every pound making a difference, 50-100 pounds can be huge, so shouting for at least 100 lbs. removed.

racerb 🤷
xnamerxxso cal · Feb 21, 2013#259
Yep, I was at 2160 at nationals. I still have the stock seats to replace and go lighter on the battery.
NJ DriveNorthern NJ · Feb 22, 2013#260
Yeah. I figured three door 2nd gens are going to be 80 to 100 lbs lighter than me on average.
kounj · Feb 22, 2013#261
How do I get in on some of this autocross?
justjesusOrange County · Feb 22, 2013#262
^

Follow this link http://www.nediv.com/ and look into the "solo" part.

There's also a cool video about "autoX" here:
http://www.solo2.com/

You might also find that video in YouTube if you search "Sea of Cones"

NJ Drive might be able to assist you further in your particular region. :)
NJ DriveNorthern NJ · Feb 22, 2013#263
Originally Posted by kou ↑
How do I get in on some of this autocross?
Since you're in NJ...

www.autox4u.com

There are plenty of events at the Meadowlands in East Rutherford run by no less than three different clubs- NNJR SCCA, MSNE, NNJR PCA.

I still think one of the best online tutorials is had by the Rocky Mountain Region SCCA here: http://www.rmsolo.org/rmsoloschool/index.html

If you're in South Jersey, there is also SJR SCCA as well as Philly SCCA just across the river.
Jason@SportsCarDebary, FL · Feb 22, 2013#264
Originally Posted by NJ Drive ↑
Yeah. I figured three door 2nd gens are going to be 80 to 100 lbs lighter than me on average.
Our 3-door 2012 was 2269lbs bone stock: with steel wheels, floor mats, spare tire, all of it.

In race trim our 2012 was 100lbs heavier than my 2007, but the 2012 did not have the carbon rear hatch, hood, still had door bars and a complete dash. If anything I think the newer car could be a touch lighter than the older ones.

Now if you have a 5-door you could be a bit heavier due to the difference in glass and extra bits in the doors.
NJ DriveNorthern NJ · Feb 22, 2013#265
Originally Posted by Jason@SportsCar ↑
Our 3-door 2012 was 2269lbs bone stock: with steel wheels, floor mats, spare tire, all of it.

In race trim our 2012 was 100lbs heavier than my 2007, but the 2012 did not have the carbon rear hatch, hood, still had door bars and a complete dash. If anything I think the newer car could be a touch lighter than the older ones.

Now if you have a 5-door you could be a bit heavier due to the difference in glass and extra bits in the doors.
Interesting Jason, thanks for that info. I agree with the 5dr weighing more. Mine weighed in new at 2340 with the UR 23mm(+13lbs), Star Specs(+12lbs more than stock), stock alloys(+8lbs total more than 15" steelies). This was with no spare tire, no mats, but a couple gallons less than full.
racerbLeland, NC · Feb 22, 2013#266
In our area theres the local SCCA group, then theres the Tarheel Sports Car Club, and if that ain't enough, we've got Triad Sports Car Club putting on events. Only issue we have right now is that the SCCA group has yet to release a 2013 event schedule, getting nervous that there might not be any events.

http://www.ncrscca.com/

http://www.auto-x.com/

http://www.thscc.com/

racerb
why?harnett county NC · Feb 23, 2013#267
Originally Posted by racerb ↑
In our area theres the local SCCA group, then theres the Tarheel Sports Car Club, and if that ain't enough, we've got Triad Sports Car Club putting on events. Only issue we have right now is that the SCCA group has yet to release a 2013 event schedule, getting nervous that there might not be any events.

http://www.ncrscca.com/

http://www.auto-x.com/

http://www.thscc.com/

racerb
gah, so awesome. i'd have to drive 2 and a half hours to get to the nearest autocross.
racerbLeland, NC · Feb 23, 2013#268
Well to be ohnest the Triad events are about 3 hours away,but I have Family in that area to stay with. Right now I'm working on an Auto-X Trailer to make these trips easier, just hate loading and un-loading from the hatch!

http://www.etrailer.com/Trailer-Hitc...eid=2010203616

http://www.harborfreight.com/870-lb-...res-42708.html

Already have one of these storage lockers to go on the trailer as soon as I've got it...
http://www.sterilite.com/SelectProdu...=182&section=6

racerb 😎
NJ DriveNorthern NJ · Mar 1, 2013#269
What's the consensus on hub spacers in Street Touring, legal or not legal? I'm not seeing an allowance for them but would like a second opinion.
racerbLeland, NC · Mar 1, 2013#270
Seems to be a gray area that is kinda open to inperpretation of the rules, I'm pretty sure I've seen some cars with them, just never looked that closely. Autocross rules like Showroom Stock rules, leave alot of items that state if it doesn't say you can do it, it's not legal. It's a great question, I'd like to know the answer to also.

racerb 🤷
ilikericeThread startersavannah, ga · Mar 4, 2013#271
Here some runs from sunday's event. First of the season.
friend let me borrow his Hero3. Finally got some video. I was running Azenis 615k with less than 2/32 tread on them. pretty bald honestly and it was 50 degrees and windy.. Came in 5th overall pax out of about 60

in order from run 2-6. Forgot to turn the camera on the first run.. derp

Got sideways in the lane changes.. I blame the cold tires.
http://www.youtube.com/watch?v=FiDU7pOruio

Got sideways again in the circle but was saved
http://www.youtube.com/watch?v=bGr8M42jh_4

http://www.youtube.com/watch?v=tIGPvk8T404

http://www.youtube.com/watch?v=nTHUgh11WYs

http://www.youtube.com/watch?v=-5y8hzwA6CU
xnamerxxso cal · Mar 5, 2013#272
Looks like STF just made a class at the SD tour 🎉
racerbLeland, NC · Mar 5, 2013#273
Thats cool, are you signed up to run??

racerb 👏
xnamerxxso cal · Mar 6, 2013#274
Yep, lucky number 96 ;)

Its actually a pretty diverse group of cars, and having not seen any other competition, aside from the Mazda 3 that likes to beat up on me 😛, its pretty refreshing.

Here's the entry list so far

8 Colgett, Tyler 2008 Honda Fit
39 Bucknell, Daniel 2007 Toyota Corolla S
135 Coe, Steve 2005 Mazda 3
196 Beyer, Bobby 2008 Toyota Yaris
6 Johnston, Kim 2004 Mini Cooper Good Doggy Phoenix, AZ
justjesusOrange County · Mar 7, 2013#275
hmmm. tempting.

i've always wanted to race against a Fit !! (For the last 4 years).

Do you have an avail seat? (well, depending on how well I do on Sunday!)
justjesusOrange County · Mar 7, 2013#277
cool :)

I think I like the Kumho deal the best. TRD doesn't recognize STF on the Pro Solo circuit. That's sad.
xnamerxxso cal · Mar 7, 2013#278
LOL, make sure you bring your Kuhmos than 🤣

STF isn't technically a class in Prosolo its called S3 or something like that, but the contingency is still there.
justjesusOrange County · Mar 7, 2013#279
LOL, ok wise guy.

If Lt Noogie wasn't MIA, we could borrow his!
NJ DriveNorthern NJ · Mar 7, 2013#280
Need to raise the front, lower the rear. Sure looks pretty.

Picture not included in this copy
xnamerxxso cal · Mar 7, 2013#281
Nice, what did you end up doing for springs and shocks?
NJ DriveNorthern NJ · Mar 7, 2013#282
Originally Posted by xnamerxx ↑
Nice, what did you end up doing for springs and shocks?
Still on Tokico HTS but with custom springs and Cusco tops.
racerbLeland, NC · Mar 7, 2013#283
Very nice!!

racerb 🤤
xnamerxxso cal · Mar 7, 2013#284
what spring rates did you end up going with? if you don't want to tell everyone you can pm me, i won't tell.
NJ DriveNorthern NJ · Mar 7, 2013#285
380f/330r.
Not optimal, but it's all I have to work with right now.
xnamerxxso cal · Mar 7, 2013#286
Out of curiosity why did you bias the springs frontward?
NJ DriveNorthern NJ · Mar 7, 2013#287
Originally Posted by xnamerxx ↑
Out of curiosity why did you bias the springs frontward?
I was intending on losing the front sway bar.
xnamerxxso cal · Mar 7, 2013#288
Ahh, makes sense.

Let me know how that works out for you, I never liked the way the car felt, running no front bar, so I decided not to pursue it.
justjesusOrange County · Mar 8, 2013#289
Originally Posted by NJ Drive ↑
Still on Tokico HTS but with custom springs and Cusco tops.
tops? as in the front upper strut mounts?
NJ DriveNorthern NJ · Mar 8, 2013#290
Originally Posted by justjesus ↑
tops? as in the front upper strut mounts?
Yes.
xnamerxxso cal · Mar 8, 2013#291
I just read your blog and I'm liking the custom bushing you've made for the engine/transmission. How bad if the vibration in the car? With my shore 60a poly tranny mount the vibration is pretty awful when the AC is on.

Also how are you liking the Cusco uppers, I've been on the fence about buying them but I'm having a hard time in deciding if they're actually worth the money or not.
NJ DriveNorthern NJ · Mar 8, 2013#292
Originally Posted by xnamerxx ↑
I just read your blog and I'm liking the custom bushing you've made for the engine/transmission. How bad if the vibration in the car? With my shore 60a poly tranny mount the vibration is pretty awful when the AC is on.

Also how are you liking the Cusco uppers, I've been on the fence about buying them but I'm having a hard time in deciding if they're actually worth the money or not.
Thanks!

Since I did all the mounts at the same time, I cannot comment on individual NVH issues. With all three done though(including an all-steel custom passenger mount), it is horrendous, lol. I've had 95A mounts in my STR S2000 CR and these are 5x worse.

In retrospect, I would have just done the lower pitch mount and call it a day, but there are side benefits to locking everything down.

First is the braking... it just stops way better while in gear. Secondly, the front end just seems to respond to harsh steering inputs better. Lastly, wheel hop has been reduced but still present. I plan on removing the pitch mount again to also replace the front bushing with Delrin.

I've only driven a couple days with the Cusco tops and haven't really been aggressive enough to offer a performance opinion. I'll tell you that they're worth the money just to be able to change shocks out in five minutes and springs in ten!

I would like to get the control arm bushings in tomorrow to see if that kills the wheel hop for good.
xnamerxxso cal · Mar 8, 2013#293
Hmm guess the Cuscos on the short list after I get my new springs in.

Also on another note with your custom springs, do you still have spring travel in full droop are are you holding the springs in place with zip ties or something like that? If its the zip tie solution, I found a way a better way to handle it by using steel rope and steel tabs bolted to the frame rails. There is a open bolt hole on the frame that uses an M10x1 bolt that was almost directly in line with the second hole for the RSB. Its not the best way to deal with it but it works without having to get the shocks shortened.
NJ DriveNorthern NJ · Mar 8, 2013#294
Originally Posted by xnamerxx ↑
Hmm guess the Cuscos on the short list after I get my new springs in.

I found a way a better way to handle it by using steel rope and steel tabs bolted to the frame rails.
Brilliant minds think alike- I was considering doing this very thing. Thanks for sharing. 👍
NJ DriveNorthern NJ · Mar 17, 2013#295
For curiosity's sake, here is a cutaway of my stock front sway bar.
5.5mm wall thickness, 24.5mm diameter.

Picture not included in this copy
xnamerxxso cal · Mar 17, 2013#296
So the front bar is hollow after all I'm guessing.
CrankyOldManWest Michigan · Mar 24, 2013#297
Originally Posted by xnamerxx ↑
So the front bar is hollow after all I'm guessing.
For torsion, the center of the bar contributes very little to the effective stiffness. Hollowing out the bar results in more weight savings than lost torsion.
xnamerxxso cal · Apr 1, 2013#298
So after my terrible defeat at the hands of a Mini this weekend, I decided to follow their lead and adjust the toe on the rear of the car just to see what happens.

Well holy cow what a difference low speed turn in is so much better, but man it sucks to drive on the street so twitchy.
ilikericeThread startersavannah, ga · Apr 2, 2013#299
how much toe did you do?
xnamerxxso cal · Apr 2, 2013#300
0 or as close to it as I could get.

I used 2 .05" washers and grinded down one side to be flat.

I test drove the car some more, and it really requires quite a bit less steering input to turn.