I need better vinyl work and photoshop help
STF posts
647 posts · 143,819 views · page 12 of 13
Replies continued
Yes... ;)Originally Posted by Eduardo_mty ↑I need better vinyl work and photoshop help
And this:
Picture not included in this copy
Andres
I liked that cx5 pictures to choose yaris color.
I want to do that vinil work in my car
I want to do that vinil work in my car
I will definitely keep my ears open for you Andres.
I am trying to plan a trip to Lincoln Nationals. I can't promise anything because i got alot of stuff going on that month already.
I am trying to plan a trip to Lincoln Nationals. I can't promise anything because i got alot of stuff going on that month already.
Thinking of doing more autocrosses this year than I usually do (once or twice a year) so buying a good set of tires. I've got a spare set of wheels- 15X7 RPF1s. Looking at 195/50 Hankooks or 205/50 Rivals, Dunlops even Bridgestones. Would appreciate any feedback on these. Thanks.
I ran 205/50 Rivals on 15x7's the last 2 seasons. I don't have anything to compare them against, but they seemed to work well. I found that I had to keep the fronts near max pressure (52 psi) to keep them from rolling under, but it could also be that I'm over driving the corners and using tire pressure to fight understeer.
I'm leaning towards the Proxes R1Rs in the magic 195/50R15 size, but haven't decided for sure. The AutoX season starts a little later up here, so I've still got some time.
I'm leaning towards the Proxes R1Rs in the magic 195/50R15 size, but haven't decided for sure. The AutoX season starts a little later up here, so I've still got some time.
I am running 205 on 7.5" rim, my fronts are at 34psi and probably can drop the pressure just a bit more. I am not rolling on my tires. Cranky, maybe you should try a 195 tire on the 7" rim to give it a bit more stretch.
I only have experience with RS3 and Rivals. I feel the RS3 is more grippy in long sweepers but the Rivals respond much better in slaloms. After talking to some guys at nationals. In the end, it all boils down to driver preference. Unfortunatly in order to get the right tire for your driving technique, its a matter of "trial and error" for each tire. I can explain how each tire works in difference circumstances, but until you actually get in those situations, its all the same.
Put it this way. Everyone in my class at nationals was driving Dunlops and Hankooks, I was the only one on BFGoodrich. I felt that I was at a disadvantage but I ended up taking 1st place. I feel tires just boils down to driver capabilities.
BTW Cranky, R1R doesnt have the pixy dust in them anymore unfortuantly from what people are saying
I only have experience with RS3 and Rivals. I feel the RS3 is more grippy in long sweepers but the Rivals respond much better in slaloms. After talking to some guys at nationals. In the end, it all boils down to driver preference. Unfortunatly in order to get the right tire for your driving technique, its a matter of "trial and error" for each tire. I can explain how each tire works in difference circumstances, but until you actually get in those situations, its all the same.
Put it this way. Everyone in my class at nationals was driving Dunlops and Hankooks, I was the only one on BFGoodrich. I felt that I was at a disadvantage but I ended up taking 1st place. I feel tires just boils down to driver capabilities.
BTW Cranky, R1R doesnt have the pixy dust in them anymore unfortuantly from what people are saying
Well crap. My only real complaint about the Rivals was the tread overlap separation. I'm going back through my list of wheels and I don't think I have a 7.5--only 5.5, 6 and 6.5. The Rivals don't come in 195, so maybe something else is in order?
I think the only "pixie dust" was that the tread compound was sticky all the way to the cords, so you could shave them and still have the equivalent of fresh compound. I don't shave them, but I will run them to the cords before tossing them.
The other consideration for me is that I'm firmly entrenched in SMF, so sky's the limit on treadwear. Of course nobody makes R-comps in 195, but I can dream, right?
I think the only "pixie dust" was that the tread compound was sticky all the way to the cords, so you could shave them and still have the equivalent of fresh compound. I don't shave them, but I will run them to the cords before tossing them.
The other consideration for me is that I'm firmly entrenched in SMF, so sky's the limit on treadwear. Of course nobody makes R-comps in 195, but I can dream, right?
Give it time. There was much frustration with tire choices before the National tour and many guys were holding out til late april when new tires and sizes will be available.
Another thing I learned about tires that will either help you or make you more frustrated. It is better to have a slightly stretched street tire on a rim to help with tire response.
NOW, this is the opposite for R-comp Tires though. R-comps have much stiffer side walls and they say it is better to pinch a tire on a rim for the max amount of grip. Next time if you get a chance to look at some National event pictures, look at the tires. You will notice that R-Comps are pinched and street tires are slightly stretched.
So I would go with a 225 R-comp if you end up going that route.
Another thing I learned about tires that will either help you or make you more frustrated. It is better to have a slightly stretched street tire on a rim to help with tire response.
NOW, this is the opposite for R-comp Tires though. R-comps have much stiffer side walls and they say it is better to pinch a tire on a rim for the max amount of grip. Next time if you get a chance to look at some National event pictures, look at the tires. You will notice that R-Comps are pinched and street tires are slightly stretched.
So I would go with a 225 R-comp if you end up going that route.
Correction--I've got a set of 15x7s, but the cost of R-comps is about double my tire budget. I'm not going to be running in national events, so a set of 140-200 treadwear is fine for my purposes.
Thanks for all your shared wisdom!
Thanks for all your shared wisdom!
I don't blame ya.. Rcomps are so expensive. And I can't justify R-comps with out a limited slip diff. Im already getting inside wheel spin on street tires and barely stock motor.
Even with the LSD, I get lots of inside wheel spin with my winter tires. That could be part of the nature of a helical diff, or the 130-ish whp I'm pushing out. Hopefully a new set of summer tires will fix the wheel spin on my daily commute.Originally Posted by ilikerice ↑I don't blame ya.. Rcomps are so expensive. And I can't justify R-comps with out a limited slip diff. Im already getting inside wheel spin on street tires and barely stock motor.
The one AutoX event I did last fall on my nearly-dead Rivals still had inside wheel spin on sharp cornering, but sweepers would hook just fine and pull hard through the apex. I've got new Tokico Reds and a fresh set of MI springs this year, so that may allow more control of tire contact in the corners.
Hmm. interesting, thanks for the info on the Helical diff experience.
I agree with you about where the wheel spin is happening. I noticed in my videos that that is where most of my wheel spin is coming from.
I just got all my video's on one computer now and I started trimming them up. I just gotta edit them now. I will have it up hopefully either tonight or tomorrow.
I agree with you about where the wheel spin is happening. I noticed in my videos that that is where most of my wheel spin is coming from.
I just got all my video's on one computer now and I started trimming them up. I just gotta edit them now. I will have it up hopefully either tonight or tomorrow.
Looks good to meOriginally Posted by Eduardo_mty ↑I need better vinyl work and photoshop help
Andres
So I been looking for new suspension and a friend linked this to me... I may have to invest in this...
When I first saw it and scrolled down to the list for makes and models, I thought, great, something else that everyone else gets except Yaris. I went ahead and looked for Toyota's list expecting to see Supra and GT86 of course... Damn, I was soo wrong
http://www.motioncontrolsuspension.c...ts/prices.html
When I first saw it and scrolled down to the list for makes and models, I thought, great, something else that everyone else gets except Yaris. I went ahead and looked for Toyota's list expecting to see Supra and GT86 of course... Damn, I was soo wrong
http://www.motioncontrolsuspension.c...ts/prices.html
Are remote reservoir suspension setups allowed in STF? I can't put my finger on the specific rule, but I seem to recall a prohibition on them for vehicles that don't come from the factory with them.
I would have to look it up. You could be correct, but anything 1 way adjustable is better than the 5 year old megans I have now. I'd get the non-remote anyways. I am not that lazy, gez
Here is my video finally. It is a bit long but its in chronological order from Test N Tune on Friday to the Final run on Sunday. Time results are at the end of each run. Hope you enjoy it. No music this time, figured some of the autocross guys wanted to hear the tires and throttle control. Any questions and explanations requested are welcome. Feel free to judge also.
https://www.youtube.com/watch?v=CdbY...ature=youtu.be
https://www.youtube.com/watch?v=CdbY...ature=youtu.be
Finally ordered my matching gauges. I need the oil filter sandwich adapter for my oil pressure sensor.
2 part questions. Is there a better/easier spot to get an oil pressure sensor?
If I do get that sandwich adapter, which one?
-3/4 UNF-16 - Fits Mazda with spin on conversion, some Nissans, VW, Ford, BMW, Scion, SRT-4, SR20, Toyota & Jeep
-3/4 UNF-16-Long Shaft- Fits Toyota Celica, Scion Tc, & MR2
Thanks in advanced.
2 part questions. Is there a better/easier spot to get an oil pressure sensor?
If I do get that sandwich adapter, which one?
-3/4 UNF-16 - Fits Mazda with spin on conversion, some Nissans, VW, Ford, BMW, Scion, SRT-4, SR20, Toyota & Jeep
-3/4 UNF-16-Long Shaft- Fits Toyota Celica, Scion Tc, & MR2
Thanks in advanced.
I've been using this one successfully so far. And you know how "nice" I am to the car. ;-)
http://www.glowshiftdirect.com/oilfi...-34unf-16.aspx
Sent from my iPad using Tapatalk
http://www.glowshiftdirect.com/oilfi...-34unf-16.aspx
Sent from my iPad using Tapatalk
Thanks, I went ahead and ordered one from Prosport, same place as I got my gauges. I went with the regular one. I believe its the same as yours except mine has 3 connections instead of 2. May use the 3rd one for oil temp sensor later on
Quick ?
The Coolant sensor adaptor, should I do the lower or upper radiator hose? I remember someone posting about it somewhere where they suggested...
Coolant going into the block would have a cooler reading.. but would you want to know the coolant temp before or after the coolant has passed through the block?
In the end I guess it wouldn't matter.
The Coolant sensor adaptor, should I do the lower or upper radiator hose? I remember someone posting about it somewhere where they suggested...
Coolant going into the block would have a cooler reading.. but would you want to know the coolant temp before or after the coolant has passed through the block?
In the end I guess it wouldn't matter.
Your normal reading is incoming temperature. This will let you know that the incoming water is in the 190 range. You could do either side, but if you put it on the out going side to the radiator, you would have to know what the normal temperature is pre-radiator. In reality, it doesn't matter where you put it...as long as you know what the temperature is supposed to be in the area you install it. But when you look at the OEM sensor, it's going into the motor and not coming out.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
makes sense.. what i thought
14.5.B: Shocks are open in ST - less electronically controlled units.Originally Posted by CrankyOldMan ↑Are remote reservoir suspension setups allowed in STF? I can't put my finger on the specific rule, but I seem to recall a prohibition on them for vehicles that don't come from the factory with them.
Just use the OE signal. Should be able to pull it from the OBD2 port.Originally Posted by ilikerice ↑Quick ?
The Coolant sensor adaptor, should I do the lower or upper radiator hose? I remember someone posting about it somewhere where they suggested...
Coolant going into the block would have a cooler reading.. but would you want to know the coolant temp before or after the coolant has passed through the block?
In the end I guess it wouldn't matter.
Aah, so remote is fine, but not ferrofluid? OEM being the exception.
ferrofluid is legal as long as the car came with adjustable shocks as OEM.
As it sits there isn't really a lot of options for aftermarket MR shocks and I wouldn't go with any of them if the controller is not setup correctly for the vehicle.
As it sits there isn't really a lot of options for aftermarket MR shocks and I wouldn't go with any of them if the controller is not setup correctly for the vehicle.
hmmm.. will try that, thanks.Originally Posted by Jason@SportsCar ↑Just use the OE signal. Should be able to pull it from the OBD2 port.
Final product for 2015Originally Posted by Eduardo_mty ↑I need better vinyl work and photoshop help
Picture not included in this copy
Andres
Andrés do you have a .... "blueprints" to do that work in my car, at least the doors.. Do you can share?
I did not have blue prints , besides the picture I posted before I made using the "paint" program from my 8 years desktop. I can send you more pictures and views of mine.Originally Posted by Eduardo_mty ↑Andrés do you have a .... "blueprints" to do that work in my car, at least the doors.. Do you can share?
Andres
I will appreciated, if you send more picturesOriginally Posted by andres3165 ↑I did not have blue prints , besides the picture I posted before I made using the "paint" program from my 8 years desktop. I can send you more pictures and views of mine.
Andres
Originally Posted by Eduardo_mty ↑Andrés do you have a .... "blueprints" to do that work in my car, at least the doors.. Do you can share?
Originally Posted by Jason@SportsCar ↑Just use the OE signal. Should be able to pull it from the OBD2 port.
Need to check with the gauge company D. The factory output may not be the same for the gauge that you bought. Hate for you to tap that signal wire just to find out that your reading 89 degrees when it's actually 195. Lol
Sent from my iPhone using Tapatalk
Yea, that was what I was afraid of. I think I should just use the sensor the gauge came with instead. When I do my water pump, I will install this at the same time while the coolant is drained.
Just wanted to update my new tire info and give some feedback. I went with 195/50R15 Z2 star specs on the 15x7s and 195/55R15 DZ102s on the 15x6.5s. The 102s ride nicely and hold up well in the corners. The Z2s held up well at reasonable pressures and behaved themselves under heavy cornering. It's gonna take a while to re-learn how to drive it, but I have high hopes.
*edit*
I also have an update on the LSD: having a proper alignment makes a world of difference with inside wheel spin. Even with my near-bald snow tires, I was able to gain huge amounts of traction coming out of a corner on my daily commute. I've finally got my summer tires on, so I'll give them a good flogging today on the way to/from work to make sure that's still the case.
*edit*
I also have an update on the LSD: having a proper alignment makes a world of difference with inside wheel spin. Even with my near-bald snow tires, I was able to gain huge amounts of traction coming out of a corner on my daily commute. I've finally got my summer tires on, so I'll give them a good flogging today on the way to/from work to make sure that's still the case.
What region do you run in? I run in FWR(Fort Wayne, IN). Might be worth it to come take a look how your car runs. Just ran my Yaris yesterday in STF with brand new Hankook RS3s, quite a difference from 2 or 3 years ago when I last ran it.Originally Posted by CrankyOldMan ↑Just wanted to update my new tire info and give some feedback. I went with 195/50R15 Z2 star specs on the 15x7s and 195/55R15 DZ102s on the 15x6.5s. The 102s ride nicely and hold up well in the corners. The Z2s held up well at reasonable pressures and behaved themselves under heavy cornering. It's gonna take a while to re-learn how to drive it, but I have high hopes.
*edit*
I also have an update on the LSD: having a proper alignment makes a world of difference with inside wheel spin. Even with my near-bald snow tires, I was able to gain huge amounts of traction coming out of a corner on my daily commute. I've finally got my summer tires on, so I'll give them a good flogging today on the way to/from work to make sure that's still the case.
Eric
I normally run in West Michigan Region, but they haven't had any events since 2013. Hence the traveling to South Bend. I plan on running the rest of their events at that site, but the other locations are just too far for now. I'm also getting into rallyX this year with Detroit Region and Furrin Group (furrin.org).
Cranky, you are running LSD in STF?
I have not tried the Z2 or Star specs. I tell you though, Rivals are in my favor. I am still waiting on my Rival S to come in. They are taking their sweet time.
I have not tried the Z2 or Star specs. I tell you though, Rivals are in my favor. I am still waiting on my Rival S to come in. They are taking their sweet time.
Oh, no, I haven't been in STF for a while. I'm just here for the tire advice. =)
I can probably make it to the Aug or Sept event but just to spectate.Originally Posted by CrankyOldMan ↑I normally run in West Michigan Region, but they haven't had any events since 2013. Hence the traveling to South Bend. I plan on running the rest of their events at that site, but the other locations are just too far for now. I'm also getting into rallyX this year with Detroit Region and Furrin Group (furrin.org).
Ahh, smart man👍Originally Posted by CrankyOldMan ↑Oh, no, I haven't been in STF for a while. I'm just here for the tire advice. =)
Oh wow, I didn't know YW had a STF thread. I used to post on MI as 2007TRD years ago, here too at some point. I've been competing in SCCA solo for 1.5 years now, in San Diego and now in NorCal. Just finished a back-to-back National Tour (2nd)and Pro Solo (5th)at Crows Landing. Let me know where I can drop a photo of my Sedan.
Drop it right here.. We don't complain about random photo's. unless I have to scroll left or right to see it, then I get frustrated.
WHAT! You and Alvin have been talked about here a couple of time... I root for you guys every time I look at the attendance for the west coast. I finished my National tour here at Dixie back in March. Was able to squeeze a 1st place.
Joseph Austin is a damn good driver too. Only if he can pull a clean run. It's either the fastest run or coned run for him, haha. He has come down to our region a couple of times.
WHAT! You and Alvin have been talked about here a couple of time... I root for you guys every time I look at the attendance for the west coast. I finished my National tour here at Dixie back in March. Was able to squeeze a 1st place.
Joseph Austin is a damn good driver too. Only if he can pull a clean run. It's either the fastest run or coned run for him, haha. He has come down to our region a couple of times.
Apparently you can't post pictures on here from FB? I don't have a hosting site...
Great job on the Win....or wins shall I say. I see you do really well. Joseph is really cool, he gives good advice and is a real help to the sport and class. Mike H. In his RSX raped us at the Pro, but I Was able to take down a SSP R8 in the bonus round!
Great job on the Win....or wins shall I say. I see you do really well. Joseph is really cool, he gives good advice and is a real help to the sport and class. Mike H. In his RSX raped us at the Pro, but I Was able to take down a SSP R8 in the bonus round!
So, I don't know if anyone remembers, but there was a discussion in another thread about the Yaris, Versa, and fit were not listed in the FSP class for SCCA Autocross. They went straight from STF to SMF. Yea, it was back in February. Anywho!
Thanks to Jason and a couple other that schooled me about classes when I said the Yaris goes to FSP for certain modifications, I put in a petition to get them added to the FSP list.
4 months later, they just released the FastTrack rule change. YAY!
#16432 Yaris, Fit, Versa Classing Proposal
Per the SPAC, add the following new listings in Appendix A, effective immediately upon publication:
FSP
Honda
Fit
Nissan
Versa (2007-15)
Toyota
Yaris
Thanks to Jason and a couple other that schooled me about classes when I said the Yaris goes to FSP for certain modifications, I put in a petition to get them added to the FSP list.
4 months later, they just released the FastTrack rule change. YAY!
#16432 Yaris, Fit, Versa Classing Proposal
Per the SPAC, add the following new listings in Appendix A, effective immediately upon publication:
FSP
Honda
Fit
Nissan
Versa (2007-15)
Toyota
Yaris
Nice!
Awesome!
If anyone is interested in checking out my pictures and setup changes, just visit the FB site in my signature. Videos are also there, but my YouTube link is down there too...
If anyone is interested in checking out my pictures and setup changes, just visit the FB site in my signature. Videos are also there, but my YouTube link is down there too...
OOOOooo... question about your brake pads. I am running the HPS Hawk pads but to be honest, they feel like OEM pads. Hawk doesn't offer HP pads on their website, did you have them custom make them? or do you have to call to special order them? I ask because I just received my $100 certificate from nationals and I have no use for it now.
I ordered my Hawk pads from Amazon, but I think TireRack has them too. They are great, get them up to temp and they stop like crazy.