Yarisworld Archive

STF posts

647 posts · 143,819 views · page 2 of 13

Replies continued

xnamerxxso cal · Jun 13, 2012#51
Well its my turn to add my results to this thread. While I didn't get in the top 20 like I was hoping for I did pull a 45/138 which in San Diego isn't bad. We also had a couple of FRS show up which it was cool to see but they turned out to be much slower than I was expecting. This event was also an experiment for me, I wanted to test to see how the car performs with the front sway bar disconnected. The one thing I noticed immediately was the car had way more traction off the line, this helps because I can rev the nuts off the engine and get it moving whereas before I would flow the passenger tire away. Handling wise the car is completely different you would definitely need much stiffer springs to do this since body roll increases dramatically which also causes turn in to suffer. The car also developed a pretty bad tenancy to oversteer when lifting off and applying the brakes it was easily controllable but it kept me from keeping the car on the edge of grip. The main benefit to removing the front bar was the insane amount of grip available on corner exit, I've been so used to the inside tire spinning I wasn't trusting the car was going to have grip available when I got on it but it held on each and every time.

Here is a video of my fast time, my driving wasn't very good since I didn't have a great feel for how it was going to behave but overall I'm satisfied with the results.

http://www.sdr-scca.com/solo2/result...-7_pax-web.htm

Video of the run you can see how unsure I am with the way I'm driving. The car also seems to have lost a small bit of lateral traction which if fine since it's gained so much corner exit grip.

http://www.youtube.com/watch?v=YqAVDlZPhc8
ilikericeThread startersavannah, ga · Jun 13, 2012#52
nice. our event last sunday got canceled due to bad storm. rescheduled for the 24th. I will try to get videos this time.. lol.. I just hate the quality of my epic. Need a gopro
ilikericeThread startersavannah, ga · Jun 13, 2012#53
oh, and the FR-S. Were the guys running them have any previous experence more then a year or 2 of autocross? I ask because we had a guy bring a new GT-R a few times and it wasn't doing very well. But one of our expericenced Evo drivers took it for one run and got a really good time just on his first run. Just saying I dont want a bad judgement on the FR-S because of some guys with money that are afraid to plow into a chicago box.
xnamerxxso cal · Jun 13, 2012#54
We had 4 drivers and 2 different cars. The fast guy was somewhere in the nature of 2 seconds quicker than me and he was running 225 star specs on stock rims and the driver said he had somewhere in the nature of 10+ years of experience. The other car was about a seconds slower than me in a completely stock car. I normally wouldn't comment on the speed difference but I have about a year of experience and I run rain tires so a decent driver with decent tires should be faster than me.

The FRS looked pretty composed but I don't have high hopes for it in B/C stock its just to slow.

If you scroll down to "Time Only" you can see the time results for yourself.

http://sdr-scca.com/solo2/results/20...-7_fin-web.htm
Jason@SportsCarDebary, FL · Jun 13, 2012#55
Originally Posted by xnamerxx ↑
This event was also an experiment for me, I wanted to test to see how the car performs with the front sway bar disconnected. The one thing I noticed immediately was the car had way more traction off the line, this helps because I can rev the nuts off the engine and get it moving whereas before I would flow the passenger tire away. Handling wise the car is completely different you would definitely need much stiffer springs to do this since body roll increases dramatically which also causes turn in to suffer. The car also developed a pretty bad tenancy to oversteer when lifting off and applying the brakes it was easily controllable but it kept me from keeping the car on the edge of grip. The main benefit to removing the front bar was the insane amount of grip available on corner exit, I've been so used to the inside tire spinning I wasn't trusting the car was going to have grip available when I got on it but it held on each and every time.
It takes a lot of spring rate, and even more rebound in your shocks to pull that off.

If your car has the 24mm front try and locate a 23mm, helps with rotation and getting power down, but its not as big of a leap as pulling the bar.
xnamerxxso cal · Jun 13, 2012#56
The 22mm bar is from a 07 sedan correct?

Yeah I don't have anywhere near enough front spring to handle not having a bar, it was completely apparent the tire rubbing on the fender.

I liked the corner exit traction but trail braking felt terrible I would oversteer with to moderate brake application so it kept me from really getting on the brakes late.
Jason@SportsCarDebary, FL · Jun 13, 2012#57
Originally Posted by xnamerxx ↑
The 22mm bar is from a 07 sedan correct?

Yeah I don't have anywhere near enough front spring to handle not having a bar, it was completely apparent the tire rubbing on the fender.

I liked the corner exit traction but trail braking felt terrible I would oversteer with to moderate brake application so it kept me from really getting on the brakes late.
Sorry, had the numbers mixed up, its a 23mm or 24mm. I can't say with any certainty what year/model came with what bar - some people have reported finding the smaller on a hatch, we did get ours off of a 2007 sedan. Warning, it is a PIA to change.

Just look for the paint dot. Stay tuned
cali yarisCanoga Park, CA · Jun 14, 2012#58
I think all of you guys need to take a road trip to So-Cal and run in CalClub to give me some company
Let me know next time you're going out!
ilikericeThread startersavannah, ga · Jun 26, 2012#59
Does anyone check the Temp of thier tires (outer, middle, inner) after each run and adjust tire pressures accordingly?

How hot is too hot on a Street tire?

I ask, because I had to do 3 runs back to back last sunday. Noticed my stopping was getting further and further. When I finally was able to stop at grid, I found my front tires were at 190*F. I have never seen them this hot before. They usually hover around 115-125.. Most i have seen was 133, and that was a very corner friendly course.

Also I would like to add that this was across the tire.. I think I dialed my camber, just right.
Jason@SportsCarDebary, FL · Jun 26, 2012#60
Originally Posted by ilikerice ↑
Does anyone check the Temp of thier tires (outer, middle, inner) after each run and adjust tire pressures accordingly?

How hot is too hot on a Street tire?

I ask, because I had to do 3 runs back to back last sunday. Noticed my stopping was getting further and further. When I finally was able to stop at grid, I found my front tires were at 190*F. I have never seen them this hot before. They usually hover around 115-125.. Most i have seen was 133, and that was a very corner friendly course.

Also I would like to add that this was across the tire.. I think I dialed my camber, just right.
190* is to hot for an ST tire, even the Hankook, you need to be spraying with water between runs.

You can't get accurate alignment data with temps after a lap, the nature of course, and amount of time driving strait back to grid tosses it out the window. The only way this works is on a skid pad, checking the loaded side, then change directions and repeat.
xnamerxxso cal · Jun 26, 2012#61
I do for surface temps since I don't have a probe. I usually start watering when my surface temps say 130+ and the highest I've seen after a run is ~165. I don't have the ability to read core temps so I can only guess as to how hot it was but as anemically the air coming out of the tire was quite hot.

Are you reading surface data or are you using a probe? As far as I know surface data is useless unless your trying to dial in air pressure and camber.
Jason@SportsCarDebary, FL · Jun 26, 2012#62
Originally Posted by xnamerxx ↑

Are you reading surface data or are you using a probe? As far as I know surface data is useless unless your trying to dial in air pressure and camber.
We have both types... Typically we find the temp difference to be around 10*, which is not bad. But the real issue is the surface temp (IR) starts to drop as soon as you stop turning, and driving strait back to grid also effects the surface temp readings, while the core (probe) temps will hold long enough to get a decent reading.
ilikericeThread startersavannah, ga · Jun 26, 2012#63
ahh.. good info.. I am using surface temp also.. but you do make good point. I normally spray with water between runs, but I had 3 runs back to back because of red flags on course workers. before my outside of the tire was usually 15* hotter than my inside after each run. but after last event, its been even across the board. But your right, optimal readings are in the actual turn itself.
ilikericeThread startersavannah, ga · Jul 17, 2012#64
Ok, I tried to get a video of my event #5, but my mount I tried from radioshack wasn't worth crap. Almost lost my phone out the window. Glad I didnt try doing it from the outside. I got video of that, I just gotta upload it off my phone.

Well, my 5th event, I came in 6th overall in pax. Was a fast course setup. bounced off the rev limiter a couple times. Alot of wide long turns.

http://buccaneerregion.com/ce-5-12.html

Then, last sunday, Event #6, I came in 1st in overall Pax.. WHAT!!!! I pulled that off in my second run, granted there were not as many people there, but the National guys were there, Stuart and Chuck, including a Mazda3 from Ohio that races every weekend apparently, He was really good, and would have had alot of pride to say he beat everyone in Buccaneer region when he was visiting. Now he can laugh at how a yaris beat him.. lol.

Well, here are the results of that event

http://buccaneerregion.com/ce-6-12.html
xnamerxxso cal · Jul 17, 2012#65
Are you going to the Lincoln champs?
ilikericeThread startersavannah, ga · Jul 18, 2012#66
Not this year. I simply can't afford it. I need new tires really bad. Maybe a couple more events left in this set.. Money is really tight right now with planning this wedding in april. Did not realize how expensive it was gonna be. But once this wedding is over with, I will do more attempts at hitting up some national events next year. I really wanna see how I compete against more STF class cars. Also, National event courses are very HP friendly from what video's I have seen. I prob wont do so good against other class's
xnamerxxso cal · Jul 18, 2012#67
Originally Posted by ilikerice ↑
Not this year. I simply can't afford it. I need new tires really bad. Maybe a couple more events left in this set.. Money is really tight right now with planning this wedding in april. Did not realize how expensive it was gonna be. But once this wedding is over with, I will do more attempts at hitting up some national events next year. I really wanna see how I compete against more STF class cars. Also, National event courses are very HP friendly from what video's I have seen. I prob wont do so good against other class's
I here ya its whats keeping me back this year also. I wouldn't say that I know packwood was a miata course and Andy Hollis did quite well in his 2. If I had to guess I would say your probably 2-3 seconds quicker than me which should put you on par with the quick guy in my region and about a 1-1.5s from Andy Hollis time judging by how he performed against people I raced against.
ilikericeThread startersavannah, ga · Jul 18, 2012#68
i wonder what STF car is dominating? I assume that miata is STS. One day I will try my hand at nationals.. maybe Dixie Tour next year.

I was planning on going to Nebraska, but It's not in the cards for me anymore.
xnamerxxso cal · Jul 18, 2012#69
I think the Mazda 2 is dominating so far from what I've been seeing but that's also the only car that's really getting development. Oh by Miata course I mean a course that works well for small low powered cars.

I kinda of know which direction I need to take the car for it to be successful but getting a hold of some of the things required has been difficult to say the least.
ilikericeThread startersavannah, ga · Jul 18, 2012#70
yep. What are your plans? if you don't mind me asking, of course, if you wanna keep it secret, totally understand, hehe
xnamerxxso cal · Jul 18, 2012#71
Nah i'll spill the beans :) The front springs will be either 400-450 lb/in and no front sway bar and rear springs at 350 lb/in. I could go higher but I think this is about the limit I want for a DD. I'll end up replacing my rear bilsteins with Konis or AST shocks and my bilsteins fronts are going to get revalved.

I've been trying to get dynatronics or pistani tune to give me a quote on getting the ecu flashed so no hassles with wiring but they do flash the ECU so that is at least an option.

I've been speaking to a coworker of mine about getting a long tube header made but also asking other companies about getting a header made for a reasonable price if neither of those two options works out or I decide to hit the easy button I'll likely have buy an off the shelf header.

I've been doing drawings about making a pillowball/camber plate since the upper strut mount from the prius is a close fit for the yaris but will need slight modification and a hole drilled but getting the plate made and the bearing cup welded is pretty simple plus if I could get the strut shaft slightly shorter I could turn it into an actual camber plate. But I may hit the easy button and buy the cusco mount if I want to spend an extra 200 dollars.

I've got a bunch of wire so I can move the battery to the trunk and it only adds something like 2lbs plus it gets rid of that stupid high battery in the front.
ilikericeThread startersavannah, ga · Jul 19, 2012#72
Ooo.. you got alot going on, let me know about that reflash on the ecu and results. Interested in that.

What tires have you gone with, and are you DD those tires or do you have a separete set of rims/wheels as DD? My RS-3 are done. Had them since Aug of last year and with consistant rotating, athey are done. about 2/32" left tread on the front and 1/32 on the rear. no threads showing and not yet completely bald..maybe have 2 events left in them. Thats roughly 10k miles, with autocross at least once a month and one track event about 5 20min sessions that day.

On my next set, I will swap rims/tires a couple days before autocross so I can get the feel of it. No longer DD these 140 treadwear tires, lol.. may just run FSP and get some R-comps
xnamerxxso cal · Jul 19, 2012#73
I'll let you know about the ECU reflash the guy is in Texas but is sort of hard to get a hold of by email guess hes one of those old school guys.

I'm currently running my DD tires which are conti extreme contact DW's they are pretty good as long as its really cold or raining which being in So cal doesn't happen very often. But I'm going to be buy a separate set of wheels and tires in the coming months I figure the R1R's or RS3 should knock a few seconds off my time. Not sure what I'm going to be doing about rims though I don't know if I have the patience to wait for the 949racing wheels or if I should go cheap and buy a set of trmotorsports 6ul knockoff's.
At one of the last events I was talking to a rep from osgiken and for a few weeks I was seriously considering moving to FSP but I don't think the Yaris will be all that successful since more powerful cars and diffs are allowed.
I figure with a proper STF build you should be able to get a yaris down to 1.5-2s off a nat level STCivic on a 60s course.
Here are the packwood results if you haven't seen them. Andy Hollis will be the guy to take down
http://www.scca.com/solo/content.cfm?cid=51062
Jason@SportsCarDebary, FL · Jul 19, 2012#74
Originally Posted by xnamerxx ↑
I've got a bunch of wire so I can move the battery to the trunk and it only adds something like 2lbs plus it gets rid of that stupid high battery in the front.
You want to add weight to move weight? Waste of time. Put a 6lb battery in the stock location and call it a day.
ilikericeThread startersavannah, ga · Jul 19, 2012#75
I'd like to play with FSP for the LSD. lol. yaris needs it so much.
Jason@SportsCarDebary, FL · Jul 19, 2012#76
Originally Posted by ilikerice ↑
I'd like to play with FSP for the LSD. lol. yaris needs it so much.
I think the Yaris would be way more fun in FSP than in STFail. 👍 LSD, light flywheel, big wheels and tires (wide and short), power. 😎
xnamerxxso cal · Jul 19, 2012#77
😆
Originally Posted by Jason@SportsCar ↑
You want to add weight to move weight? Waste of time. Put a 6lb battery in the stock location and call it a day.
It's not quite adding weight since the wire only weighs 3 lbs and my battery currently weighs 27. The braille is on my list of improvements I just don't like having weight up high, hell I'd move the battery where most of the CAI's pull in just to get the weight lower on the car. But I'm sure that 6lbs up top make almost no difference.

I've found the LSD isn't such an issue if you get rid of the front bar but figuring out the spring rates you need to run to compensate for no front bar is another matter all together.

Originally Posted by Jason@SportsCar ↑
I think the Yaris would be way more fun in FSP than in STFail. 👍 LSD, light flywheel, big wheels and tires (wide and short), power. 😎
I believe its STFu 😆
Jason@SportsCarDebary, FL · Jul 19, 2012#78
Originally Posted by xnamerxx ↑
😆

It's not quite adding weight since the wire only weighs 3 lbs and my battery currently weighs 27. The braille is on my list of improvements I just don't like having weight up high, hell I'd move the battery where most of the CAI's pull in just to get the weight lower on the car. But I'm sure that 6lbs up top make almost no difference.
Sorry, 30lbs in the back is not an improvement over 6lbs in the front. Also don't forget the mounting hardware and battery box if you are using a non-sealed battery. But it will be worth it for the added inconvenience of having the battery using up hatch space. 😆

Go look at fast ST Hondas, you will find the battery under the hood. But go ahead and reinvent the wheel. 👍
cali yarisCanoga Park, CA · Jul 19, 2012#79
I have to say that is true of the Hondas that are competitive; battery is right there in stock location.
xnamerxxso cal · Jul 19, 2012#80
Can't argue with you on that the STCivic's do keep the battery in the stock location but I think those cars are more concerned with total weight reduction vs weight location. It was just something I thought of but haven't had a chance to apply since I don't have a sealed battery. I just don't like the f/r balance the car had from the factory and wanted to do anything I could to fix that.
The stock battery won't fit correctly anywhere in the trunk without making a custom case. But I'm sure I'll buy a braille or a pc535 and mount it in the stock location.
Jason@SportsCarDebary, FL · Jul 19, 2012#81
Originally Posted by xnamerxx ↑
Can't argue with you on that the STCivic's do keep the battery in the stock location but I think those cars are more concerned with total weight reduction vs weight location. It was just something I thought of but haven't had a chance to apply since I don't have a sealed battery. I just don't like the f/r balance the car had from the factory and wanted to do anything I could to fix that.
The stock battery won't fit correctly anywhere in the trunk without making a custom case. But I'm sure I'll buy a braille or a pc535 and mount it in the stock location.
You can not effectively fix the weight balance of the Yaris within the framework of the rules. Creating work and doing unnecessary mods for the sake of doing them is nothing but a waste of time and money. Work on driving, the rest does not matter much.

The 99 car sits at 1800lbs, with 1200lbs of it on the front. Its not ideal, but I can assure it is faster than a 2400lb Yaris with a 50/50 split.
xnamerxxso cal · Jul 19, 2012#82
I never figured I would be able to get a meaningful move from one side to the other but from a numbers standpoint I didn't like the having 1350 lbs on the front tires compared to the 850 I had on the rear.

I don't think a weight difference of 50 lbs anywhere on the car will affect its ability with my driving skills. Its just one of those things Id rather not jump into a gun fight with a 22.

I haven't touched the car at all this season aside to play with alignment changes and disconnecting the front sway to see how the car behaves. I'm not really touching anything until I can get some better tires.
justjesusOrange County · Jul 23, 2012#83
So who was the white Yaris running STF at El Toro yesterday (07/22/12)?

Namer: Glad to see the girl back and driving the Yaris :)
xnamerxxso cal · Jul 23, 2012#84
I didn't catch his name but he was a cool enough guy. Yeah she was having the time of her life in that car I think it's her 3rd event so far but she's starting to get the hang of it.

I made sure to have Tom Berry drive her around just once to see what the car can really do. He was something like 8 seconds faster than her, but I was more surprised he was so complimentary about my car since its a hell of a lot slower than the ASP EVO he normally drives. I want to say Tom was about 7 seconds quicker in my car than in the white one so tells you how much tires and shocks are worth.

You didn't look bad in the civic though although that course must have been difficult in that car I was WOT in my Mustang and having a hard time of it I can't imagine how the civic was taking it.
justjesusOrange County · Jul 23, 2012#85
That's so cool. Glad she's having fun out there. My ex didn't like the "work" part of it, as the dust/dirt at El Toro messed with her allergies way bad.

I had Mr. Berry drive my Yaris as well, with the girl and me in the car. He liked it too. He sure can toss that little thing around!

I hit the rev limiter about 3 times in my car. it was a crazy fast course!!!
DUDE, what about that "optional" diamond? LOL that thing was nuts!
The civic, otherwise, took it well. New Toyos aren't good for El Toro. But, come Fontana, they will be better. ;)
xnamerxxso cal · Jul 23, 2012#86
Yeah I'm not a big fan of the work part of it either but you get by. I like the surface at El Toro more but for some reason I like running at Fontana better but I live like 5 miles away from El Toro so I don't have to wake up early when I go there.
Yeah I think I was on the rev limiter twice in mine but after watching my videos its pretty clear the struts are blown in my mustang so that'll likely be the last race for a while.
That diamond was nuts I kept taking the left hand side but after watching Jeff S video I think the right hand side would have been the better choice although the end kept me from really pushing the car since I was never sure if I was going to make it or not I was probably giving up a second or two in that last turn alone.
I would have expect the civics to be hating that course since there so highly sprung and the speeds that could hit were nuts.
justjesusOrange County · Jul 24, 2012#87
I like running El Toro better. Not just cuz it's so much closer. I seem to do better there (or the others do worse? I tend to see others get more cones and DNFs at El Toro).
Sucks that your struts are blown. I'm dreading the day mine go out.

I kept thinking the right would be better. Everyone said go left. So I did. except the one time it came up fast and I didn't react fast enough and went right. It was funny seeing people do the same, or plow INTO the diamond. Good stuff. LOL

Nah. The civics are surprisinly, civil. hehe. Stiffly sprung, but it doesn't feel like it!! I actually think mine runs smoother than my Yaris in most conditions.
cali yarisCanoga Park, CA · Jul 24, 2012#88
^ I've ridden along with you, it doesn't feel as stiff as it actually is. (oh boy, does that sound wrong).
justjesusOrange County · Jul 24, 2012#89
Originally Posted by cali yaris ↑
^ I've ridden along with you, it doesn't feel as stiff as it actually is. (oh boy, does that sound wrong).
It doesn't help that I LOL and sit right next to my boss.
xnamerxxso cal · Jul 24, 2012#90
I had heard they don't tolerate high speed turns very well(I think Steve Ekstrand had some troubles at the previous event on that right hand sweeper).

I've always figured you could get away with the super high spring rates because most of the cars are running some nuts penske or Koni 30 series shock that let you get away with it.

I'm not to worried about the struts on that car they've lived a long and very very hard life plus they suck so it gives me a reason to upgrade. But that $800 bill is going to be a bit tough to swallow so its down to street driving for awhile but gives me more incentive to get the yaris competitive. Knowing its still to slow with Tom Berry driving tells me I need to drop my wheels and tires down to a 195/50/15 size which means R1R's are in my future.

LOL I didn't think anyone actually hit the diamond dead center
justjesusOrange County · Jul 24, 2012#91
THAT is interesting!!
At this last one, that first right hander, I was pretty much flooring it all the way through.

I like that line of thought! Upgrade the Yaris!!!!!
You're currently on a 16" wheel, right? On a low powered Yaris, going to a lightweight 15" will help. And I'm liking the R1Rs :) just got some new ones thru Micro Image. Thanks Garm!

I'm curious to how both our cars will stack up. I haven't autoX mine in quite some time.

Yeah. Straight on.... it was funny. Except for the two guys working that area.

Hey, which anti-roll bar you running out back??
xnamerxxso cal · Jul 24, 2012#92
Yeah I'm running 16" OZ Chono's or something bought them years ago. Yeah I need to move to 15"s this car needs all the torque it can get since that 1-2 shift is so wide hell if I had some redline id be downshifting into first on some of these corners. My car isn't all that well setup so it will be interesting I don't think I've seen yours run yet.

I saw some craziness in the end section but was having a really hard time keeping track of everything since I was working radio and some of the course workers were quite green.

I'm running the TRD bar in the back when I thought running H Stock in this thing was a good idea. I haven't really wanted to replace it since I don't know how the car is going to behave with new springs so its going to be one of the last things I change. It's worked out so far for me.
justjesusOrange County · Jul 25, 2012#93
LOL - I remember my first autoX, with Long (LT Noogie) - He was riding shot gun and showing me what to do. I went to downshift into first, cuz of the speed i was at. It was hard to do it, by the time I was able to I was moving SOOO slow, he said, "what are you doing? are you trying to PARK the car?"

There are some videos of me running. Including a neat slo mo video. Mostly, interior view vids I did myself. JustJesusVideo on youtube.
My car isn't set up at all. Just ran it in CST. Tiger springs and UR rear bar. HAD TRD intake but I sold it when I thought I was going to do HS. dumb move.
cali yarisCanoga Park, CA · Jul 25, 2012#94
"are you trying to PARK the car?"
omg -- priceless. By the time I met you, you were faster than him. Now you're ALMOST faster than me. 🙇
cali yarisCanoga Park, CA · Jul 25, 2012#95
Yeah I need to move to 15"s
Or 13's. 😉
xnamerxxso cal · Jul 25, 2012#96
If Toyo made r1r in 13" id go that route in a heartbeat but 15" is the only size where I have decent tire choices.

Well my box of toys came in today 350# purple springs now time to get some for the front :)

I've been running CST in my mustang but the pax index is retarded because I can run full slicks in its real class and still pax lower.

You going to be bringing your yaris back for the thinking of lincoln champ?
cali yarisCanoga Park, CA · Jul 26, 2012#97
I hope you give us a chance to quote you on parts sometime, we are usually quite competitive.

what is "thinking of lincoln"?

In 13's you've got A6, R6, V710, R888, Ventus and a few others. not so bad.
justjesusOrange County · Jul 26, 2012#98
Originally Posted by cali yaris ↑
omg -- priceless. By the time I met you, you were faster than him. Now you're ALMOST faster than me. 🙇
ALMOST? Darn you, man! I shouldn't have helped you shave those two seconds off..... I WOULD have been faster than you ;)

Originally Posted by xnamerxx ↑
...

Well my box of toys came in today 350# purple springs now time to get some for the front :)

I've been running CST in my mustang but the pax index is retarded because I can run full slicks in its real class and still pax lower.

You going to be bringing your yaris back for the thinking of lincoln champ?

The last box of toys I got were spark plugs and wires :( I want better toys.

I thought CST / CSM were NOT indexed?? Thought it was a run-what-ya-brung class. CSM is for R-comps, CST for street tires.

I'm definitely going to El Toro on Aug 5 (Garm, Cal Club names their events. the next one is Thinking of Lincoln, takes place as I noted above... you should come out so I can beat you finally!!!!) --- I was planning on finding a way to "caravan" my crx as well as my civic, as I do have a co-driver I committed to for the civic. I guess I can maybe bring the Yaris instead. Ultimately, it depends on the run/work order. I can do X-runs in the 2nd vehicle I bring out.


and Garm, sorry, but he can't run any of those tire choices you listed if he plans to continue to run in STF. It's the street tire class. :)
xnamerxxso cal · Jul 26, 2012#99
Originally Posted by cali yaris ↑
I hope you give us a chance to quote you on parts sometime, we are usually quite competitive.

what is "thinking of lincoln"?

In 13's you've got A6, R6, V710, R888, Ventus and a few others. not so bad.

The springs I bought were only available from one vendor from what I could find it was an odd size 3" coilover spring used on off road trucks or something basically a hard to find part.

I would normally go through you guys since your the only vendor that can get parts in a reasonable amount of time are the easiest to work with.

thought CST / CSM were NOT indexed?? Thought it was a run-what-ya-brung class. CSM is for R-comps, CST for street tires.
Yeah CST/CSM are paxed I think CSM is .879 and CST is .862 basically if you want to be competitive on the pax index cst is a bad class to run unless you have a fully prepped mod car on street tires.

Yeah thats the reason I ran CP last event I don't like working at noon and running at 4-5 it gets old quick.
xnamerxxso cal · Jul 26, 2012#100
If anyone is interested in running an autocross on 8/5/12 Cal Club will be hosting the Thinking of Lincoln event. Here are the details https://www.motorsportreg.com/index....7BE4DCFE0FEFE0


You should bring your car out Garm, people still talk about that thing like it was a unicorn.