some dude locally (CA) is selling one for about 130. has some damage by the headlight area.
STF posts
647 posts · 143,819 views · page 8 of 13
Replies continued
hmm... what would be the shipping to GA? 31419? I don't wanna spend over 150 including shipping.
here's the link.Originally Posted by ilikerice ↑hmm... what would be the shipping to GA? 31419? I don't wanna spend over 150 including shipping.
link to hood
racerb, we emailed you yesterday about the strut brace. (if that's your order). please reply if you haven't already.
cali yaris, yeah after I spoke with you on the phone, the Wife and I left for Edisto Beach SC for a wedding. Just returned home, so yes I got your message and understand the UR bar is out of stock.
Thanks, just let me know when you have more in stock, I'll get one from you.
racerb
Thanks, just let me know when you have more in stock, I'll get one from you.
racerb
Just finished my first Autox in almost 2 months with my new front springs. Car worked surprisingly well and I was about 1-2 seconds off STR/STX and half a second give or take off of STC. Car seems to be working but I kinda forgot what to do.
But this course was pretty hard to read and one of the slowest courses I've ever driven. My average speed was a little less than 29 mph.
Ended up getting top time in class by over a second, but didn't manage any clean runs so didn't actually win.
http://www.youtube.com/watch?v=DGfoA...ature=youtu.be
But this course was pretty hard to read and one of the slowest courses I've ever driven. My average speed was a little less than 29 mph.
Ended up getting top time in class by over a second, but didn't manage any clean runs so didn't actually win.
http://www.youtube.com/watch?v=DGfoA...ature=youtu.be
getting better!
So another AutoX this weekend, I think I have the car just about dialed into how I like it, I could probably use some better shock valving but overall the car is working fantastic I couldn't ask for anything more...aside from power and gearing :).
Jesus you missed out on a really challenging and fun course this weekend, hope to see you at the next event.
Video of the course.
http://www.youtube.com/watch?v=10NarNMzn7Q
Picture not included in this copy
Jesus you missed out on a really challenging and fun course this weekend, hope to see you at the next event.
Video of the course.
http://www.youtube.com/watch?v=10NarNMzn7Q
Picture not included in this copy
Wow, car looks good, I just need a bigger screen to look at it!! I feel your pain on power and gearing, but I'm still way behind on suspension and several other needed power mods.
racerb 🎉
racerb 🎉
Thanks, my car has plenty of power, and when I figure out how to get the Camcom working will have more than I can put down. I'm not happy with the gearing of the but on the course below would have hurt me in a few sections.
My car is far faster than I'm capable of driving at this point, but I'm really quite happy with the way its setup. Going over my video and data I know I could have shaved several seconds off my time by braking later or slowing down more in a few second but I was happy with the result either way.
Let my car to someone else who was having a brake problem on his last run, who normally drives a stock Mini Cooper S, and pulling back into grid you could see the giant smile on his face from how well the car handled.
My car is far faster than I'm capable of driving at this point, but I'm really quite happy with the way its setup. Going over my video and data I know I could have shaved several seconds off my time by braking later or slowing down more in a few second but I was happy with the result either way.
Let my car to someone else who was having a brake problem on his last run, who normally drives a stock Mini Cooper S, and pulling back into grid you could see the giant smile on his face from how well the car handled.
Yea gearing was my problem yesterday, I did drive the first third of our course in first gear, then used second to the finish. If it hadn't been for left foot breaking, I would never have been able to maintain momentum through several sections of a tricky course layout!! Hoping to have pictures soon, didn't take any myself, just relied on others.
racerb 🤷
racerb 🤷
^that's a long time in 1st gear !
Namer, yeah I hear you. I really need to start waking up earlier!
I think I'll be going to SpeedVentures autoX in Sept to get my seat time.
Namer, yeah I hear you. I really need to start waking up earlier!
I think I'll be going to SpeedVentures autoX in Sept to get my seat time.
Yeah I wasn't going to stretch first that far. But after working the course for all of Group 1s runs and seeing 2/3s of the Driver doing it, I said what the heck! It actually worked and made for less shifting.....
racerb
racerb
i always said (not really) if it works, then it works :)
Haven't posted here in a while. But just had an event last sunday and the results have been posted. Out of 80 drivers 7th overall PAX, 6th overall RAW. No big deal you say...
I had to run SMF class because I still couldn't get an oem hood in time. I could have ran TSMF but some peer pressure from a honda fit and EG civic hatch convinced me to run in their class for fun. This Fit usually runs STF but he got new Rcomp tires and is running SMF now. The EG has a B18C5 Swap and well prepped. Great guys, I enjoy hanging out with them.
SO, with that said, I think SMF is looking good for me when I finally go turbo and get some good Rcomp tires.
http://www.buccaneerregion.com/ce-6-13.html
I had to run SMF class because I still couldn't get an oem hood in time. I could have ran TSMF but some peer pressure from a honda fit and EG civic hatch convinced me to run in their class for fun. This Fit usually runs STF but he got new Rcomp tires and is running SMF now. The EG has a B18C5 Swap and well prepped. Great guys, I enjoy hanging out with them.
SO, with that said, I think SMF is looking good for me when I finally go turbo and get some good Rcomp tires.
http://www.buccaneerregion.com/ce-6-13.html
Derrick we had a guy from the Buccaneer region show up at our last SD race, guy was pretty quick, I think his name was Brian Wright.
Signed up to run this weekend with SCCA at Cape Fear Community College again. I've made a few more changes to the car since last event, namely Tokico HPs and TRD springs, can't wait to see the difference. Had planned other changes, but I'm holding off on making wholesale changes, and doing a few things between each Event. Here is the Event link from SCCA North Carolina Region.....
http://www.ncrscca.com/events/2013/0...ils-blackwater
And Entry list so far...
http://www.motorsportreg.com/index.c...2#.Uh90AD3D-1s
racerb 😁
http://www.ncrscca.com/events/2013/0...ils-blackwater
And Entry list so far...
http://www.motorsportreg.com/index.c...2#.Uh90AD3D-1s
racerb 😁
^ let us know how you like that set up.
Had a great day finishing second, but way off the first place Mazda2. One issue could possibly be lack of proper alignment settings, my usual Shop was unable to get me in, machine was down. So I ran the car after just eyeballing and tape measuring a few things at home. I strongly believe my last run of the day would have been my best, but dumbass me found brake pedal not clutch heading into the last sweeper!
I'll post up some results and pictures from this event later. On a side not, we had a pretty big downpour right after the lunch break, and everyone had issues with their afternoon runs. Still don't know what to think of the Mazda2 and where it gets it's speed.
http://www.ncrscca.com/sites/default...kwater_fin.htm
racerb
I'll post up some results and pictures from this event later. On a side not, we had a pretty big downpour right after the lunch break, and everyone had issues with their afternoon runs. Still don't know what to think of the Mazda2 and where it gets it's speed.
http://www.ncrscca.com/sites/default...kwater_fin.htm
racerb
Hmm.. name sounds familiar but I don't see a brian wright. Haven't seen his name pop up in the last few events. What was he driving and what class?Originally Posted by xnamerxx ↑Derrick we had a guy from the Buccaneer region show up at our last SD race, guy was pretty quick, I think his name was Brian Wright.
He and his wife were running RTA in a WRX, from the brief convo I had with him, he got stationed here a few months ago.
Saw this thread and figured I'd post a few videos of the "Bumble Rumble" in action. After the end of the year, we will be leaving STF (Like Derrick) to go SMF (R-Comps, Turbo, Aero, etc.) Should be a hell of a 2014 season for SMF. :-) Between the couple Civis, the Fit, and now two Yaris (or Yarises, or Yari), should be interesting. 👍
Axis vs Allies last year
http://youtu.be/qcE_iBUihbA
First Event for 2013
http://youtu.be/hK7cG4URtZo
Event 6 for 2013
http://youtu.be/xlxZVtFhY0Y
I need to get the others online for the year. Just too many things going on.
Axis vs Allies last year
http://youtu.be/qcE_iBUihbA
First Event for 2013
http://youtu.be/hK7cG4URtZo
Event 6 for 2013
http://youtu.be/xlxZVtFhY0Y
I need to get the others online for the year. Just too many things going on.
Nice buck. I am actually still searching for a hood still. Will probably stay in STF as soon as I find and OEM hood. Thinking about another project for boost actually. I don't wanna mess with these crazy ass ECU's for tuning. Really expensive for something that I can do with a mid 90s for half the price. WE will see. Good luck Buck
Did anyone ever test out a larger front swaybar on their STF class Yaris? I know it was discussed, but never heard anyone say if they had actually installed one and tested it. I'm leaning toward adding this as one of my next STF mods, but wanted input before spending the cash!
racerb 🤷
racerb 🤷
personally, I don't see any reason to stiffin up the front any more than it already is. I have been searching for the smaller sway bar with a different color spray dot to swap with.
What is your current set-up? I am still getting quite a bit of body roll and the last Toyota I built, gained more cornering force on radial race tires with more roll stiffness. So I'm just curious of what I need to do other than a bar swap?Originally Posted by ilikerice ↑personally, I don't see any reason to stiffin up the front any more than it already is. I have been searching for the smaller sway bar with a different color spray dot to swap with.
racerb 🤷
I am using Megan coil-overs and 23mm rear sway bar. I adjust my dampening on hard on all 4 corners. I use RS-3 225/50 on 15x7 rim. I put 40psi up front and 55psi in the back to get my rear to rotate better. Basically that's it.
Did anyone ever test out a larger front swaybar on their STF class Yaris? I know it was discussed, but never heard anyone say if they had actually installed one and tested it. I'm leaning toward adding this as one of my next STF mods, but wanted input before spending the cash!Yes. The front sway bar rocks. Does NOT cause more understeer.
AutoX this weekend with speedventures!
yea, probably doesn't. Adam Neylans with his honda fit runs with a front sway bar but not a rear. says it helps with his cornering. Not sure how. Driving styles I assume.Originally Posted by cali yaris ↑Yes. The front sway bar rocks. Does NOT cause more understeer.
I would play with tire pressures a bit more before jumping on a front sway bar personally
My reason for asking is simple, I live on a long dirt road, so could not do coil-overs without trailering my car to events. So I went with a simpler and cheaper Tokico HP, TRD spring set up, so I can still drive to and from events. However this set up is proving not quit stiff enough and a larger front bar seemed the next logical step. Was hoping someone had actually run a similar set up and could give some feedback on their experience.
racerb 🤷
racerb 🤷
Ahh.. I see. Yea, I would try the front sway bar then. What tire pressure are you running front and rear?
I'm using the old shoe polish trick, starting high and dropping until I get a little more roll-over toward the sidewalls. Oh and I'm running Kumho XS 205/50/15s, usually starting out between 40-42 front, 38-40 rear. On Sunday I was actually down to 36 front, 32 rear by my last run and had I not screwed that run myself, was on a 29 second run. Still would have been over a second off the top STF Mazda in our Region.
racerb 🤷
racerb 🤷
interesting. When and where is the next autocross in your region? I wanna try to hit up an event soon.
On another note, Ran into a couple of people in a Top Gear panel at DragonCon from North Carolina region. I asked them what class they were running in but gave me some vague answers and didn't quite understand what they were talking about.. I wanna run into them again.
On another note, Ran into a couple of people in a Top Gear panel at DragonCon from North Carolina region. I asked them what class they were running in but gave me some vague answers and didn't quite understand what they were talking about.. I wanna run into them again.
We have an NCAC event in Charlotte in October, not sure I'll make that one. Then the Region is back up at Cherry Point Air Station in November, trying to make this, then back here in Wilmington at CFCC November 30-December 1.
http://www.ncrscca.com/Solo
I'm also thinking of making the drive up to a few Triad events, but not sure right now, since I'll be heading to Indy in a few weeks.
http://www.auto-x.com/schedule.php
I've noticed, and maybe it's because I've been away from Auto-xing for sooo long, the people in general seem a little stranger than I remember. The whole new, read way too many, classes and structure seems to have diluted the overall feel of the events. I liked the good old days of Stock, Street Prepared, Prepared, Mod, and Ladies, that was it!
racerb
http://www.ncrscca.com/Solo
I'm also thinking of making the drive up to a few Triad events, but not sure right now, since I'll be heading to Indy in a few weeks.
http://www.auto-x.com/schedule.php
I've noticed, and maybe it's because I've been away from Auto-xing for sooo long, the people in general seem a little stranger than I remember. The whole new, read way too many, classes and structure seems to have diluted the overall feel of the events. I liked the good old days of Stock, Street Prepared, Prepared, Mod, and Ladies, that was it!
racerb
It would be a lot of fun to swap cars for some runs. And yes, suspension tuning has a lot to do with driving style.
Oct 5, with SCCA autoX, they're putting together a "Cup" race with teams. I forget the details, but like a team of 3 drivers, 3 cars, at least two of those being different drivetrain configurations.Originally Posted by cali yaris ↑It would be a lot of fun to swap cars for some runs. And yes, suspension tuning has a lot to do with driving style.
Yea, especially with the new Road Tire class for stock cars. RA (Road tire Awd), RR (Road tire Rwd) and RF (Road tire Fwd). Its just getting crazy now
My good friend David came out to run with us on Sunday, ran in Road Tire Rear with a base class of D Stock. It had been close to 15 years since he'd run, I thought he was going to have a stroke just trying to register on-line. I told him that was a lot of the reason I chose STF, it was just easier to settle on this class and work to become competitive.Originally Posted by ilikerice ↑Yea, especially with the new Road Tire class for stock cars. RA (Road tire Awd), RR (Road tire Rwd) and RF (Road tire Fwd). Its just getting crazy now
racerb 🙁
First place in Pax again at our North vs. South shootout at Roebling Road Raceway.
Was .6 ahead of 2nd place in pax. And that was just my clean run
Was .6 ahead of 2nd place in pax. And that was just my clean run
1 attachment not included in this copy
Results from the event
1st in pax and 7th in Raw out of 79 drivers
http://buccaneerregion.org/ce9-jax10-13.html
1st in pax and 7th in Raw out of 79 drivers
http://buccaneerregion.org/ce9-jax10-13.html
Lower perch is 62mm, upper perch I used a K-Sport perch which is the same dia. The rears are just about 3" so you'll really wanna pickup a setup of Megan/Tein/ksport rear adjusters if you want any sort of spring selection. I was running on 3x8 springs for quite a while but as a started going up in the spring rates and lower in the ride height adjustability just wasn't there.
Bilstein will work on them but you really have to talk with Juan before you send them in since its not quite a standard setup.
I used a Koni 2.25-2.5 adaptor and shaved the inside to fit. But I also ran on the undersized perch upfront with little issue, the rear you'll need to put a metal sleeve otherwise the spring won't sit correctly and make tons of noise.
Bilstein will work on them but you really have to talk with Juan before you send them in since its not quite a standard setup.
I used a Koni 2.25-2.5 adaptor and shaved the inside to fit. But I also ran on the undersized perch upfront with little issue, the rear you'll need to put a metal sleeve otherwise the spring won't sit correctly and make tons of noise.
I didn't use a real tool when I tested the spring rates and the springs are variable as well but the fronts were close to 280lbs and the rear was 200lb-250lb. Very similar to the PSS, and HR will give you next to no information about the springs.
I don't have a copy of the valving infront of me but I do at home. From what I remember the front was valved pretty well for 300lbs and the rear for about the same. With my revalve set to be really digressive and not having much lowspeed compression it handles my 500f/600r springs much like a set of adjustable turned to soft. Its going in to be revalved in a month or so to handles the higher spring rates the car is currently running. I've been talking to Bilstein to see if it would be possible to add either an adjustable shaft or a compression canister to the rear shocks, but haven't made much headway, I may end up hacking up the rear shocks and doing it myself if I can't proceed forward.
I don't have a copy of the valving infront of me but I do at home. From what I remember the front was valved pretty well for 300lbs and the rear for about the same. With my revalve set to be really digressive and not having much lowspeed compression it handles my 500f/600r springs much like a set of adjustable turned to soft. Its going in to be revalved in a month or so to handles the higher spring rates the car is currently running. I've been talking to Bilstein to see if it would be possible to add either an adjustable shaft or a compression canister to the rear shocks, but haven't made much headway, I may end up hacking up the rear shocks and doing it myself if I can't proceed forward.
I do just fine with my megan coilovers. The adjusting dampening they offer is great between autox and DD.
Do you mind PM'ing me Marucs contact info.
You should chat with Bret at Yawsport.
Talked to him today, got an answer I didn't want to hear. Basically was told to wait a bit while they work on their shock development. He also talked me out of turning them adjustable at least for now, as its a really complex project to make it work correctly. Shocks are going back to Bilstein one more time for a revalve going to suck on the street, but hopefully the car will be a bit more tolerant to forward weight transfer. Funny enough he's doing the same with with HR's on his TL that I'm doing with the Yaris.
I got a friend who used to live in Jacksonville, Florida and moved to california. He ran an autocross the other weekend. Joe Batwinis ran a miata in RTR. You may remember he lost his GoPro during one of his runs. He told me he talked to a guy that ran a yaris. Was that you xnamerxx?
He used to run his mini cooper.. He is a huge Rally fan too
He used to run his mini cooper.. He is a huge Rally fan too
I think so, I was talking to a guy who mentioned he had a friend who ran a yaris back in Florida, didn't catch his name though. If its the guy who I was talking too he was a cool dude.
Lol, yea, that was him. Small world.