Yarisworld Archive

Scion XB 1NZ-FE Turbo build

391 posts · 99,292 views · page 5 of 8

Replies continued

Nexus1155Dorchester · Jan 9, 2011#201
MORE EXTREME THAN THIS!???!!?

Picture not included in this copy
ilikericesavannah, ga · Jan 9, 2011#202
^really? a v8?^
Bluevitz-rsOshawa, Ontario, Canada · Jan 9, 2011#203
Yeah That V8 Powered xb is about as bad ass as you can get
ilikericesavannah, ga · Jan 9, 2011#204
sacrilegious dudette.. hahahahaaa
Nexus1155Dorchester · Jan 9, 2011#205
The rims are a little too baller for me, but that thing makes ~ 800hp, can easily hit 1000hp i bet.
xbgodThread starterFlorida · Jan 9, 2011#206
I would love to have Mobil 1's money. Thats more like a chassis race car with a XB body.

Well fact, thats exactly what it is. But it's so BAD-ASS

I'll keep my 75k 1st GEN 1NZ-FE

XBG
H3LlIoNMidatlantic · Jan 9, 2011#207
Originally Posted by xbgod ↑
not really. Car has always been streetable and will still be when finished.

XBG
Eh I'm just teasing...been following this thing for a year and still haven't seen it run (found the build thread on scikotics right after you broke it back down.) Can't wait to see what happens with this.
YodaFL · Jan 9, 2011#208
is that thing twin turbo?
xbgodThread starterFlorida · Jan 9, 2011#209
Yes that Mobil 1 XB2 is twin !!!!!!!!!!!!!!

I'll have final numbers this week on the XB and video to follow. I'll pick it up this fri or sat. Then I'll post all the numbers.

Just ordered a 160amp alternator to keep both batteries charged. Of course It's being chromed to match the rest of my stuff first.

Always something being done.

XBG
xbgodThread starterFlorida · Jan 10, 2011#210
Suspension has been set and car is all aligned. Can't belive they got those big-ass wheels tucked and car droped. Looks quite impressive, can't wait to show you guys.

Well all that is left mechanically is to do a final Dyno tune, which will be done tonight or sometime tommorow depending on Dyno schedule.

I can than atleast drive it around to the next couple of shops for final details. Also got a 160 amp alternator thats been chromed ordered in. Should have it by end of week. Needed something a little stronger to support 2 batteries in my car.

Moving in the right direction now!

XBG

フィックシウス
“To Put Into Flight”
cali yarisCanoga Park, CA · Jan 10, 2011#211
Moving in the right direction now!
Yeah, forward. And really, really fast.
xbgodThread starterFlorida · Jan 10, 2011#212
Hopefully atleast fast enough to hang with you

XBG
YodaFL · Jan 10, 2011#213
Yo Xb do you know what cft tuning rates are? can you trow me an estimate..?
xbgodThread starterFlorida · Jan 10, 2011#214
It varies depending on ECU. Rates usually go between 300-500 for complete tune on the MD500.

Your best bet is to call and talk to Rolo let him that I told you to talk to him and He'll give you my disount. We have a business relationship with customers I refer.

Tell him Aras sent you. Here is the shop number 407-273-1051

You can also go to cftshop.com

XBG
YodaFL · Jan 11, 2011#215
sweet
ilikericesavannah, ga · Jan 11, 2011#216
im sorry, but im in savannah, where are u located in FL, if u dont wanna put that info on the threads, throw me a pm.. i was going to go to a place in jacksonville, but ill drive the extra few hours to a tuner familiar with a 1nz
TRD_Turbo_YazzaUK · Jan 11, 2011#217
nice lokks a screamer would look good in a vitz/echo/yaris
xbgodThread starterFlorida · Jan 11, 2011#218
CFT is in Orlando, Fl. I have a house in Tampa. I also have an apartment in Ft. Stewart, Ga. If your in Savannah I'm currently 30 min or so from you. So if you need to bullshit or get together let me know.

Headed to Fl. Thursday night to pick up car over the weekend. Hopefully numbers sometime today. I'll update this evening.

XBG
ilikericesavannah, ga · Jan 11, 2011#219
oh sweet.. yea.. i moved to savannah cuz my dad was stationed there then he finally retired, when i graduated, he moved back to texas and i stayed with friends and a few other family members here in savannah.. i trip to orlando for a tune is nothing then.. i was more scared u were gonna say miami. but thanks for the offer. i will definitly hit u up sometime when i get a standalone. maybe we can ride together to orl. thats a few months from now for me though.. gotta get this LSD first
ilikericesavannah, ga · Jan 11, 2011#220
oh, and have u been to or know people who have been to 'VelocityTrends' in jacksonville? ive only heard stories of "my friend went there and..." but nobody has any good insight on the place.. i drove by it once or twice. alot of high dollar cars there.. but was curious if they were familiar with 1nz's
xbgodThread starterFlorida · Jan 11, 2011#221
Well I did some looking about Velocity Trends in Jax. Couldn't find much about them good or bad. Other than people have had a good time hanging out there.

Second they have no web-site which leaves me wondering about what they're capable of. I would never leave a tune to a company that can't show what they can do or have substancial people to back up their claims. I have no idea what dyno they use or what ECU's they tune.

I would call and ask what ECU's they do tune, then I would follow up by calling the places directly to verify the legitamecy of their knowledge of their ECU. They should have a certificate to show their qualification.

Their are to many wana be shops that say they tune and don't know a thing but talk a good talk.

Rolo at CFT has certs. for Microtech, Haltech, AEM, Greddy, Crome, Hondata and a couple of others. And his certs a verifiable. So just look before you leap.

XBG
ilikericesavannah, ga · Jan 11, 2011#222
yea, i was getting the same response from others. i looked up thier old website and tried calling thier number but was disconnected.. i was unable to contact anyone.. but this was back in april/may of last year.. i may drive the extra 2-3 hours to orlando. they obviously got expericence with what im considering doing.. thanks a bunch on ur help.
xbgodThread starterFlorida · Jan 11, 2011#223
no problem dude.

OK, this is a piss poor picture out side CFT by the bays. It was taken on a camera phone so I could see the stance of the car after the allignment. I get alot of request to show a pic of the entire ride but since i'm not done with it I've been hesatant on doing so. But against my better judgement I decided to give you all something to look at. It's very grainey but you can get the idea.

XBG

1 attachment not included in this copy

PETERPOOPOahu · Jan 11, 2011#224
hot rod
xbgodThread starterFlorida · Jan 12, 2011#225
Well, it's over. Got this 20 min. ago...........final results gentalman. I'll get the video they shot over the weekend. Thanks for the support on this build.

XBG

1 attachment not included in this copy

TamagoOff Grid · Jan 12, 2011#226
conservative Hp numbers. you must be pulling lots of timing. . .
xbgodThread starterFlorida · Jan 12, 2011#227
Thats what Rolo said.

VVTI is off and Microtech is still the main ECU right now. I have a Haltech unit coming in still but untill I get it I'll take the numbers I got.

XBG
cali yarisCanoga Park, CA · Jan 12, 2011#228
Congrats on some real nice numbers. Looks like it went very lean above 4k?

What was your boost on that pull?

How come it stops making power at 4200 rpm?
xbgodThread starterFlorida · Jan 12, 2011#229
23 PSI on that run.

Using Torco 107 octane and VP M1 Meth.

Also still have not used nitrous yet. Just incase someone asks.

Going to go like this for 2,500 miles then try out the nitrous.

XBG
PETERPOOPOahu · Jan 13, 2011#230
Very lean!

Nice numbers though. Couldn't imagine what 300+ whp feels like in a yaris.
Nexus1155Dorchester · Jan 13, 2011#231
Tuner needs to tune better.... you will have much greater numbers.
ParmasML · Jan 13, 2011#232
I agree the map is too lean even for low boost above 4K. Increase fuel you are risking the motor life drastically.

Also if that was my dyno I would just shift at 5300rpm... after that you are loosing power and time.
YodaFL · Jan 13, 2011#233
I see you are using Torco 107 octane. Was a conversion used to account for that octane to show in the afr? I am using 100 octane so when I see for example 13 afr on my gauge its actually running a bit richer than that. There is still lots more power I feel you can extract from it cause its way lean in the upper part where you power band just levels off. Very good job tho Xb! Thanks for contributing
ParmasML · Jan 13, 2011#234
Originally Posted by Nexus1155 ↑
Tuner needs to tune better.... you will have much greater numbers.
Sorry you are wrong here, richer mixture isn't equal to greater numbers infact it's the opposite way.

The best mixture is 14.7 stoich AFR and XBG map is going above it at lowest and highest rpm. So he is getting the maximum numbers he can achieve... richin the mixture makes the numbers lower but prevents damage to the engine

To Yoda... I think the conversion was made to account for the octane rating.... since at 3K rpm he's about maximum rich 10.
cali yarisCanoga Park, CA · Jan 13, 2011#235
The best mixture is 14.7 stoich AFR
stoich yes, at WOT no, better down around 12. Dyno pulls are done at WOT.
ParmasML · Jan 13, 2011#236
Originally Posted by cali yaris ↑
stoich yes, at WOT no, better down around 12. Dyno pulls are done at WOT.
I forgot to mention 12 AFR for boost and lower AFR for high boost in case of boost spikes.
Nexus1155Dorchester · Jan 13, 2011#237
Sorry you are wrong here, richer mixture isn't equal to greater numbers infact it's the opposite way.
Ehhhh, Sweet spot is around 11.* for turbos and theres a bunch of reasoning behind that. Of course you can lean it out and make power, but aiming for stoich, really? you will make more power from having a proper afr and more ignition advance.... Safer too.
scioncrewHB · Jan 13, 2011#238
YAA LEAN IS MEAN!! LOL LOVE IT!
scioncrewHB · Jan 13, 2011#239
love to see what that motor looks like now.
Scubaru Stevecalgary · Jan 13, 2011#240
Originally Posted by scioncrew ↑
love to see what that motor looks like now.
+1
Focus_Sh1ftNew Jersey · Jan 13, 2011#241
Nice numbers - scary lean AFR though.

Must be the high octane fuel and methanol that's keeping your motor in one piece.
Blown_xaVirginia · Jan 13, 2011#242
Originally Posted by cali yaris ↑
Congrats on some real nice numbers. Looks like it went very lean above 4k?

What was your boost on that pull?

How come it stops making power at 4200 rpm?
youre looking at the torque curve garm.
Blown_xaVirginia · Jan 13, 2011#243
Good numbers man. If you talk to your tuner again soon, ask him what correction he entered. I see it says sae correction method on the sheet. If its the latest method, it accounts for atmospheric conditions and a 15percent mechanical friction loss. Regardless, numbers are far from conservative as sombody say opposite. 300hp plus from a 1.5l is anything but conservative. So cheers to that.
H3LlIoNMidatlantic · Jan 13, 2011#244
Sweet numbers. Curious...what are you hoping to run at the track? What were your E.T.'s on the old build?
scioncrewHB · Jan 13, 2011#245
man thats a realy good looking dyno gragh. hopping you will take it to the drag strip. good job on your build 👍
xnamerxxso cal · Jan 14, 2011#246
Check your fuel pump/lines/tune your running way way to lean I'm surprised you didn't melt a plug.
xbgodThread starterFlorida · Jan 14, 2011#247
Haven't considered E85. And to the other guy on my fuel pump, lines and so fourth, are you serious? I'm not even going to respond to that. All is working well and tune is great. I made good numbers and now I'm movin on. It's time to finish pimping it to look sexy and wash and wax it. The only thing I'm doing on the side is getting involved with someone else on a real cam set for these motors. This will be in the works for a little while but you can bet when I'm done with R/D with that it will be bullet proof. Don't ask me any questions on it cause it's top secret right now. But you can rest assured I will have a real head cam set for next year. It's been alot of fun and I set out to make power and did so. So if your a hater out there then beat my numbers, good luck.

XBG
YodaFL · Jan 14, 2011#248
Waiting for the vid now so i can see it in action.
cali yarisCanoga Park, CA · Jan 14, 2011#249
^ I think it would be good for the tuning community to know (and I would think you'd be curious too):

1. Why it was so lean.
2. Why the power curve gives up early.

Besides that, the low end power must feel very sweet. I don't have it down there any more. 🙁

Looking forward to seeing the video.
xnamerxxso cal · Jan 14, 2011#250
Your running 15:1 afr at 5700 rpm's what about that screams yeah this motor is getting enough fuel. I have no idea what pump/pressure/fuel lines your running. Being that the afr only looks marginally good at 3-3.5k my guess would be that the fuel pump can't keep up. Just because it didn't blow up on the first run doesn't mean it won't. Id rather not see your motor that costs a pretty penny because your letting it run lean.
Unless your fuel system can handle another 30% increase in flow I wouldn't even have e85 on radar.