xbgodOriginal postFlorida · Sep 5, 2010#1I was asked to start a thread about my build. I was orginaly posting here because of the Gude head package, but I think we can all learn something new from each other since we carry the same motor.
My car which is just a toy and not a daily driver consumed me when I picked it up in 2005; brand new with 5 miles on it. At the time I had been working at Aerospace Components for 10 years doing nothing but manufacturing race car parts for drag racing. It became a running joke that I couldn't get this motor to make over 250hp.Keep in mind all the guys that work there are BBC guys running door cars. so like all males I set out to prove them wrong.
Here is a quick overview of my mods. I will post pics and continue with explaining my mods as questions arrise.
Fully Built Race motor:
1NZ-FE
9:1 Compression
Golden Eagle Sleved block
Crower rods
Arias Pistons
Ferara Valves + 1 mm oversized
Ferara retainers, Lockers, springs
3 way valve job
Ported and polished head
Gude cams
Weapon-R sheet metal intake
Edlebrock Victor-X 70mm TB
Tial / Garrett GTX-2860 RS Turbo w/ SS Housing and Billet Wheel
Greddy Intercooler
Tial Q BOV
Tial MVS Wate gate
LHT Performance custom Exhaust manifold/ down pipe and all intercooling pipe
Cometic gaskets
HKS air filter
Apexi Super grounding system
Apexi GT Resivor tank
Stand Alone ECU:
Microtech LT10 w/ Microtech Ignition and Bosch coil packs
Electromotive crank trigger
Nology Hot wires / NGK plugs
Greddy Turbo timer
Greddy Boost controller
Fuel System:
Walboro 255l , Aeromotive regulator , Perrin fuel rail ,
Aerospace Components custom fuel block for NX kit
680cc Precision injectors
AEM methanol injection
DEI complete Cryo system
Nitrous Express 100 shot kit tps activated. auto bottle opener
w/ fire and ice cooling system for constant 1000 psi
Tuned By: Rolo at CFT
Aerospace Components 13" full floater disc brake system front
and rear
N.B.S 2.5" custom stainless exhaust w/ Aeroturbine Resonator
and Skunk2 Can
Oil system: Perma cool
Perrin under drive pully
Level 10 5 speed transmission
Ferdenza clutch and fly wheel
Autometer gauges
12 point roll cage
JIC Majic dampner kit
Axels: Drive shaft shop
Sparco seats, pedals and shift knob
TRD short shifter
Samco hoses
5 Zigen 18" Pro Racer
Nitto rubber NT555
Seibon carbon fiber hood and hatch
Greddy boost controller and timmer
4 attachments not included in this copy
Replies 390
xbgodThread starterFlorida · Sep 5, 2010#2Also some of my parts listed are not in the current motor pic due to me customizing them. Like most racing parts their never how you want them out of the box.
2manywheelsCanada · Sep 5, 2010#3Nice! what kind of numbers are you getting out of it??
WOW!!!
How many numbers did you put into it? HAHA $$$$$
xbgodThread starterFlorida · Sep 5, 2010#4Prior to this build I had a Greddy turbo kit 14G and maxed out at 228hp. What I am showing you now is all new and I have not tuned it yet. I'm waiting on a head from Gude to finalize the motor build. As far as how much coin is in this build, I've lost track but my wife hasn't. I think total which includes the car and everthing I've done inside and out around 65k. Nothing on this car has gone untouched. I think the VIN# is still the same though. Here is a pic of the brake system with my old AXIS wheels on. Front and rear 13" full floater race kits.
2 attachments not included in this copy
xbgodThread starterFlorida · Sep 5, 2010#5Ok back to the build, Here is my one-off exhaust manifold. what a Pain in the ass to get that turbo to fit.
2 attachments not included in this copy
Man this is an awesome setup man... I am curious how much is your 1/4mile time!
Is the transmission the stock 5speed?
Wow!
I guess working where you do you make the kind of money to be able and fortunate to do this to a yaris, or any car for that matter.
Much respect and i wish i could win the lotto someday lol.
blacksandiegovitzJust chillin' out brah ! · Sep 5, 2010#8WOw wow wow ! Amazing build so-far keep up posted on those numbers with you new set-up
yarrrnew mexico · Sep 5, 2010#9 Originally Posted by
xbgod ↑ I think total which includes the car and everthing I've done inside and out around 65k.
speechless
pimp my yarischicago · Sep 5, 2010#10Thats pulling out all the stops. Sweet ride.
PETERPOOPOahu · Sep 5, 2010#11oh my
henry33slovakia · Sep 6, 2010#12👏 congratulations
nice ride
xbgodThread starterFlorida · Sep 6, 2010#13Thanks for all the props. just keep my fingers crossed everything goes like it should. Here's some more pics.
4 attachments not included in this copy
xbgodThread starterFlorida · Sep 10, 2010#14Here is a close up of the 70mm T/B on the Weapon-R intake manifold
1 attachment not included in this copy
cali yarisCanoga Park, CA · Sep 10, 2010#15did Drive Shaft Shop do your axles?
xbgodThread starterFlorida · Sep 10, 2010#16Yes, DSS did my axels. I've abused my stock axels so much that I went ahead and bit the bullet for a set of those axels. Their 26 spline like on a stock Mustang. So now no more worries.
I've done a ton of suspension work on this new build. Besides the axels I'm using JIC Double adjustable dampners, Hotchkis front and rear sway bars, JIC under body braces and of course that 13" full disc front and rear brake kit.
I'm pulling the plastic tunnel out between the seats and refitting the car with a aluminum tunnel and installing a Hydraulic hand brake from K-Sport. No more stock parking brake. Besides could prove to be a little fun.
XBG
1 attachment not included in this copy
47_MasoN_47Northwest Alabama · Sep 10, 2010#17O_O
Holy crap...
cali yarisCanoga Park, CA · Sep 10, 2010#18What is the intended purpose of the vehicle?
sleey0PA · Sep 10, 2010#19Looks like a show car that would decimate all at the track!
He said it isn't his de, but if that was mine It'd drive it everywhere.
PETERPOOPOahu · Sep 10, 2010#20Can't wait to see track times after it's tuned up!
xbgodThread starterFlorida · Sep 11, 2010#21Orginally was just to make the fastest first gen Xb on a 1.5l motor. Now it's become more of a well built street car that can handle well.
I do alot of corporate shows for Scion so I think the more extreme it is the better response I will get. Plus it's kinda nice knowing you got the best of everything (in my opinion) under the hood and under the body inside and out.
The car is just for fun no real worries about what to do with it.
XBG
sleey0PA · Sep 11, 2010#22No worries?
For the price of and Audi S4, stacked, or a fully-built EVO, I would think I would "worry" about it quite a bit. l2ms
Sweet ride, bro.
xbgodThread starterFlorida · Sep 11, 2010#23I cant look at it that way, this has been done over a 4 year time span so the money has been put out in pieces at a time. and besides someone's gotta do it.
This has just been a journey to see how well built and nice it could be done. Anything worth doing is worth doing well.
Yes it's been expensive but I've been fortunate to be able to do this. I've also made alot of head way for others by doing this. So I think it's been well worth it.
XBG
xbgodThread starterFlorida · Sep 11, 2010#24Heres a pic of my dash....This is what it did look like, the new dash is underway. New tricks up my sleve...
2 attachments not included in this copy
xbgodThread starterFlorida · Sep 11, 2010#25PETERPOOP.....was meaning to tell you, Your Yaris nicely done. Very clean and it sits well.
xbgodThread starterFlorida · Sep 11, 2010#26Here are some pics of the full stand-alone unit in my car. This is a Microtech set-up with Nology hot wires and Bosch Coil packs.
5 attachments not included in this copy
PETERPOOPOahu · Sep 11, 2010#27 Originally Posted by
xbgod ↑ PETERPOOP.....was meaning to tell you, Your Yaris nicely done. Very clean and it sits well.
Oh hey thanks! hehe.
xbgodThread starterFlorida · Sep 12, 2010#28Remember people, just because you have nice parts and things that shine dosen't make it just a show car. It just means you have the ability to have those expensive parts as well as make it perform.
Here is a pic of a close-up of my motor showing the direct port Nitrous set up that I had welded in on the Weapon-R intake manifold. The blue tape is where the nitous feeds are going. Also all those interested in a clean nitrous set up, I've included a pic of the billet rail I'm using that holds all 3 noids. Makes for a clean install.
2 attachments not included in this copy
rob323Joyner, Brisbane · Sep 12, 2010#29 Originally Posted by
xbgod ↑ Here are some pics of the full stand-alone unit in my car. This is a Microtech set-up with Nology hot wires and Bosch Coil packs.
What made you go with Microtech? There are certainly better aftermarket management systems produced in Australia.
xbgodThread starterFlorida · Sep 13, 2010#30Been using microtech for years. Orginally because it was my only real option 4 years ago. I tried the Greddy stuff back then and it sucked so bad I threw it in the garbage. Microtech is simple, it's in your face raw racing power, it's like MSD on steroids. no MAF sensor to worry about or other sensors to worry about. Microtech sees all my other sensors without issues and tunning is breeze. Also when seeking a tunner you need to also see what they tune with the best and that their not just guessing with your shit. I chose this system based on having a tunner that is certified in this system and a system that was reliable.
Yes there are newer and better systems out now and once I'm done if I'm not totally happy I will be going to Motec. This sysem will run me about 9,000.00 installed and tunned with all the features I would need. Motec is alacarte so every option cost you. I have the money to do this change but I want to see how things go this way first, before I spend another 9G.
XBG
rob323Joyner, Brisbane · Sep 13, 2010#31Will Microtech interface with a knock sensor yet?
xbgodThread starterFlorida · Sep 13, 2010#32Good question and I'll be honest I don't even know if I have mine hooked up that way or not. I've gotten so good at listening for detonation that I back off when tunning. Not to mention I use Racing fuel when I'm tunning. Thats the other beauty of not having this as my daily driver is I can run race fuel and not worry about the expense.
I know some things have changed for the Microtech set-up so I'll find out for you about the knock sensor.
Also keep in mind I may not be running the VVTI like most do. I'm going to use such a wild cam that I will more than likely not run VVTI.
I've been running my set-up like VVT instead of a VVTI application as it stands right now. Remember I'm not using a MAF sensor. My set-up is race oriented. I don't care about fuel economy and I make up for the torque with my cams. These are two things that are usually related towards the VVTI which is responsable for both.
XBG
TamagoOff Grid · Sep 13, 2010#33interesting points of view in this thread, and lots of stock-photos of parts........
ParmasML · Sep 14, 2010#34 Originally Posted by
xbgod ↑ Been using microtech for years. Orginally because it was my only real option 4 years ago. I tried the Greddy stuff back then and it sucked so bad I threw it in the garbage. Microtech is simple, it's in your face raw racing power, it's like MSD on steroids. no MAF sensor to worry about or other sensors to worry about. Microtech sees all my other sensors without issues and tunning is breeze. Also when seeking a tunner you need to also see what they tune with the best and that their not just guessing with your shit. I chose this system based on having a tunner that is certified in this system and a system that was reliable.
Yes there are newer and better systems out now and once I'm done if I'm not totally happy I will be going to Motec. This sysem will run me about 9,000.00 installed and tunned with all the features I would need. Motec is alacarte so every option cost you. I have the money to do this change but I want to see how things go this way first, before I spend another 9G.
XBG
I don't know Microtech but I am sure Haltech is better. It has about the same capabilities of a Motec engine managment. Currently Installed on my yaris although still needs tuning. Will post a dyno sheet next week probably.
xbgodThread starterFlorida · Sep 15, 2010#35Haltech is for sure better than Microtech. My issue is I've been using Microtech for 4 years and have built more of a race motor and only using VVT. If at some point I need to change it will be for Motec.
There seems to be a certain ass-clown who has a car with 2 dicks hanging out the ass-end for tale pipes. Who seems to think because orginal photos of parts were published that I must not have them. Little hard to take pics of parts when your in Iraq. Any question about how much money I have to spend on parts call Paul at Dezod, whom I'm real good friends with...He'll tell you my pockets have almost no bottom when it comes to parts. Like the pic of the axels that I bought from him.
You my friend have a big mouth and most people here can't stand you, which reflects all the private PM's I get from guys telling me so. do your self a favor go join the MR2 convention.
I'm more than likely going to take a heat round from a MOD for this but I have too many people telling me that this shit has to end.
XBG
ParmasML · Sep 15, 2010#36I agree with you on the parts. Quality cannot be an option on cars and behind that is your insurance for your motors life and yours included.
Keep up the good work and don't forget to leave some cash for the kids.
xbgodThread starterFlorida · Sep 15, 2010#37Well said bro.
And I sure am grateful that my kids love the track and car shows; mainly for all the carnival food but hey, they enjoy looking at the rides and picking out cars they'd love to have. Their next on my to spoil list along with the wife that puts up with this.
XBG
PETERPOOPOahu · Sep 15, 2010#38Any videos of the car?
xbgodThread starterFlorida · Sep 15, 2010#39Not on me right now and the one I do have at home is like 2 years old and thats if I can find it. Going to be doing a new video of the car at the shop as well as when it's getting tuned on the Dyno. Just finished talking to my tunner Rolo to set up the time in Nov to do this. Should be good and I'll also be able to let you all know how the gude head package holds up.
XBG
The SpectacleTampa, FL · Sep 15, 2010#40Lot of money in this car. Looking forward to the end result
xbgodThread starterFlorida · Sep 15, 2010#41Me too. I think it'll do just fine. Then I can move on to all my body work and update my interrior.
XBG
rob323Joyner, Brisbane · Sep 15, 2010#42 Originally Posted by
xbgod ↑ Haltech is for sure better than Microtech. My issue is I've been using Microtech for 4 years and have built more of a race motor and only using VVT. If at some point I need to change it will be for Motec.
Agreed, better to use something you are familiar with than to use something you are not.
I have had bad experiences with Microtech on other cars due to inaudible detonation and blown head gaskets and any future systems I use will have to be able to do automatic knock retard (eg, Adaptronic, Vipec, Autronic etc, there are plenty of other options other than Motec).
There can be good gains had by utilising the continuously variable valve timing if you ever change to a system that can control it, but you will have to manually check you clearances to know just how far you can advance and retard the cam before the valves smash the pistons.
xbgodThread starterFlorida · Sep 16, 2010#43I've done well with Microtech but the best thing I can say is to definatley have a tuner experienced in what ever ECU you decide to buy and that he's not winging it. My tuner Rolo who owns CFT went to Australia to be qualified on this system at Microtech.
Can't wait to get home and get underway. I've got work inside and out to do. Hopefully I'll get to meet some of you at some of the shows this up coming year. Also I'll be at PRI in Orlando to attend the trade show; so if anyone is going let me know.
XBG
just realized you are in Florida. Might be taking a trip down to Orlando soon. You think your bud Rolo could tune my Yaris :)
xbgodThread starterFlorida · Sep 18, 2010#45Depending on Engine management we can use him or go 5 miles down the road to King performance.
Either way we would be back to Rolo's shop to use the MD500 Dyno. "The King of Dyno's"
Rolo is qualified in these management systems: Microtech,AEM, Greddy,Chrom,HKS, Hondata, Haltech
Let me know
XBG
sleey0PA · Sep 23, 2010#46xbgodThread starterFlorida · Sep 23, 2010#47Wes,
I never worry about jack-asses like that. Those that chime-in like that after they see my stuff are usually just pissed because I beat them to it. And I must say I love the the whole why don't you run a block guard?
.....Hmmmmm....mabey because I have a sleeved block and don't need one. Those guys are straight fucktards. I think I've made it pretty clear what I'm capable of doing. Which is to say there is nothing I can't do. And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats.
I've taken my fair-share of bullshit from people but hey I've been on Speed-vision 11 times, have had my XB in the booths at 3 years of PRI in orlando,Fl. Have been featured in Modz365 magazine have been recognized by TRD, have been the main feature at all the Scion events in Fl. And have yet to loose to any Toyota / Lexus at a car show to-date.
Now thats me talking smak but I've paid my dues and have helped pave the way for parts that were unheard of untill people like my self, Brian Crower and Paul Dezod started testing and producing parts before this ever got popular. The crower rods everyone loves...yeah...Brian and I had them tested in my car and ready for production since 2005.
I've made my goals and have set the standard. It's now time for me to help others achive there dreams and get them in winning seat.
I do this now because I enjoy watching others make their rides bad-ass. I have nothing to prove. I've already been where most are trying to go and I will help others get there.
It's not about me anymore, it's about our whole club and getting everyone their.
XBG
sleey0PA · Sep 23, 2010#48 Originally Posted by
xbgod ↑ And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats.
Quote of the Century right there!!! HAHAHAHA LOL!!
And it is now added to my signature to be a timeless classis!!
sleey0PA · Sep 23, 2010#49It's all good, Aras.
I just don't know why they were calling you a douchbag. You didn't say anything stupid or be a troll in that forum so the only thing I could think of was they were hating.
You have been very, VERY helpful to me and my annoying questions! lol
So you are allright in my book, bro:D
xbgodThread starterFlorida · Sep 23, 2010#50I didn't even know that forum existed. They were talking trash on that forum before they even knew who I was. It wasn't till someone from Scikotics told me about it before I took a look at that site and posted like 3 times and not once did I bash anyone.
I think Garm was the only one who had anything real positive to say on that site if memory serves me correct.
But hey their loss, there all so smart over there than can figure it out for them selves.
You guys on the other hand...great crowd, good humor. Anyone can be keyboard tough. I tell'em drag your shit to one of the shows;I get paid more to just let it sit in a booth than to take it down the track.
I'm a huge people person at any track or trade show. I'm willing to give more stuff away than I am concerned about selling you a line of shit. It's all about taking care of each other bro.
XBG